共查询到20条相似文献，搜索用时 78 毫秒
1.
本文简要介绍了结构地震反应观测研究的意义。并以中国地震局防灾大楼和北京市人大办公大楼结构地震反应观测系统为布设实例,阐述了中国大陆地区结构地震反应观测系统的两种布设方式。对两种方式进行了分析,指出简化布设中存在的问题,并提出了布设原则,用于指导结构地震反应观测系统的布设。 相似文献
2.
3.
强震观测建筑结构的地震反应分析 总被引：5，自引：0，他引：5
选择取得强震观测资料的建筑结构为研究对象，采用有限元法建立结构的动力反应分析模型，利用SAP2000程序分析了结构的地震反应，并同实际记录到的结构地震反应进行了对比分析，讨论了结构模型参数估计和一些不确定因素对模型精度的影响。 相似文献
4.
地震前兆观测涉及到电磁学科、地下流体学科、形变学科等众多观测种类和方法，其相应产出的观测数据种类和构成十分繁杂，给地震前兆观测数据结构标准的制定带来巨大困难。中提出双表结构的方法，即在数据库中采用相互关联的二个表结构(索引表和数据表)来表述一个观测数据项的方法。与现行的其他结构表示相比较，双表结构法有着众多的优点和长处。首先，它是一种普适性的观测数据表示方法，目前实际工作所获取的各种地震前兆观测数据均可采用此方法加以表示，这样就大大降低了构建庞大的地震前兆观测数据库的复杂度；其次，它有效地解决了支持可变采样率这样的技术难题，对延长地震前兆观测数据结构标准的生命周期有着潜在的重要意义，这也是与现实的地震前兆观测的需求相吻合的。另外，双表结构法还有效地降低了数据存储冗余，提供了快速检索数据的机制。总之，双表结构法是以有限增加单个数据表示复杂性来大大降低整个地震前兆观测数据库构成复杂性的方法。中提出用具有树形特征的主表结构来阐述采用双表结构构建地震前兆观测数据库及应用系统的方法。 相似文献
5.
概述了国内外强震动观测的研究现状和结构地震反应观测台阵的研究情况。并对北京市人大办公楼的结构地震反应观测台阵的研究实例作了分析,该观测台阵在没有强震的情况下,依然取得了有用的地震记录。文中对该台阵得到的两次地震记录分析、处理,结果的对比分析用于验证该结构反应观测台阵布设的合理性。最后阐述了该台阵布设的不足,针对不足给出几点结构反应观测台阵布设的合理建议,并展望了结构地震反应观测台阵布设研究的美好前景。 相似文献
6.
《地震地磁观测与研究》2015,(4)
<正>强震动观测利用仪器测量和记录地震现象和效应,即地球地表和近地表介质的地震运动以及工程结构反应,其目的是借助于观测记录资料研究地震地面运动及工程结构的反应和破损特点与规律,为认识地震过程及进行工程抗震设防与减灾提供依据。1932年美国研制出世界上第1台强震动观测仪,即USCGS型加速度仪。1933年在美国南加州地区布设第1批 相似文献
7.
基于强震观测的隔震结构地震反应分析 总被引：2，自引：0，他引：2
福建省防灾减灾中心大楼是一栋高约40m,安装有强震观测系统的隔震大楼,目前该结构台阵已记录到30多次地震引起的大楼地震反应。本文利用具有强大非线性功能的ETABS软件建立大楼结构模型,同时考虑隔震结构的楼梯和填充墙对结构地震反应的影响,并利用台阵记录验证大楼结构模型线弹性地震反应的可靠性,说明隔震大楼结构模型能很好地模拟大楼的地震反应过程。在此基础上结合大楼原型动力性能实验的实测参数,以大楼自由场地的三个实际地震记录作为输人,对大楼在中小地震作用下非线性地震反应进行分析,结果表明大楼具有良好的隔震效果。 相似文献
8.
简要回顾了我国水工结构强震观测的历史，介绍了水工结构强震观测的现状、特点和监测技术，以及大坝地震安全报警和强震观测记录的应用，对今后水工结构强震观测工作提出了若干建议。 相似文献
9.
以北京市防震减灾中心结构为例,进行了结构的地震反应观测及振动特性识别研究。基于半功率带宽法对结构脉动测试数据进行了分析,计算出了结构自振周期和振型以及相应的阻尼比。各振型都具有较大幅值的楼层分别位于3、6和8层,据此设计并建成了结构地震反应观测台阵。分析台阵地震记录识别出了结构的自振特性,同时功率谱曲线显示,井下数据存在高频特性,初步判定其来自钢套管振动。开展结构的数值模拟分析,利用观测楼层上地震记录的卓越频率不断修正结构数值模型,直至结构反应与地震记录的频率值相符,且与脉动测试数据基本一致,相对位移对比分析发现,在该模型基础上相对位移反应与相对位移记录基本吻合。结构地震反应观测和数值模拟分析较好地实现了结构地震反应观测台阵的观测目的。 相似文献
10.
粘弹性阻尼器连接的相邻结构非线性随机地震反应分析 总被引：7，自引：1，他引：7
本文用随机等价线性化方法探讨了相邻结构之间用粘弹性阻尼器连接后的非线性随机地震反应，分析发现：在小震作用下，粘弹性阻尼器对相邻结构可以同时达到较好的控制效果；但是在强烈地震作用下，安装粘弹性阻尼器有可能会在减少一个结构的地震反应的同时，增大另外一个结构的地震反应。 相似文献
11.
A simple method for the non-linear static analysis of complex building structures subjected to monotonically increasing horizontal loading (push-over analysis) is presented. The method is designed to be a part of new methodologies for the seismic design and evaluation of structures. It is based on the extension of a pseudo-three-dimensional mathematical model of a building structure into the non-linear range. The structure consists of planar macroelements. For each planar macroelement, a simple bilinear or multilinear base shear–top displacement relationship is assumed. By a step-by-step analysis an approximate relationship between the global base shear and top displacement is computed. During the analysis the development of plastic hinges throughout the building can be monitored. The method has been implemented into a prototype computer program. In the paper the mathematical model, the base shear–top displacement relationships for different types of macroelements, and the step-by-step computational procedure are described. The method has been applied for the analysis of a symmetric and an asymmetric variant of a seven-storey reinforced concrete frame–wall building, as well as for the analysis of a complex asymmetric 21-storey reinforced concrete wall building. The influence of torsion on structural behaviour is discussed. © 1997 by John Wiley & Sons, Ltd. 相似文献
12.
为改善传统连梁钢板阻尼器的适用性,提出了一种新型耗能连梁钢板阻尼器的设计方法,通过对阻尼器工作区域的划分与设计,使新型阻尼器充分发挥耗能作用,有效地提高了结构整体耗能能力。基于有限元软件ABAQUS模拟低周反复荷载作用下墙肢与阻尼器的应力应变状态,以验证所提出的新型阻尼器的设计方法及端部嵌固区的可靠性,并通过对原结构和实施耗能连梁钢板阻尼器结构进行弹塑性时程分析,探讨其改进后的抗震性能。研究结果表明,新型嵌固区构造不仅能够保证阻尼器与墙肢协同工作良好,还能大大降低施工难度;通过实施该阻尼器,可形成耗能连梁及抗震多道防线,在连梁钢筋混凝土部分损伤较为严重的情况下,仍能保证连梁具有一定的延性和耗能能力。 相似文献
13.
14.
A review of research on seismic behaviour of irregular building structures since 2002 总被引：1，自引：1，他引：0
The paper presents an overview of the progress in research regarding seismic response of plan and vertically irregular building
structures. Three areas of research are surveyed. The first is the study of the effects of plan-irregularity by means of single-storey
and multi-storey building models. The second area encompasses passive control as a strategy to mitigate torsional effects,
by means of base isolation and other types of devices. Lastly, the third area concerns vertically irregular structures and
setback buildings. Although fewer papers have been published in this last area with respect to the former ones, this state-of-the-art
reports extensively on research efforts and progress into the seismic behaviour of irregular buildings in elevation to show
the growing interest among specialists in the field. 相似文献
15.
二次结构常常在大震甚至中小地震中发生损坏或中断工作，急需寻找安全有效的设计方法。对一幢典型结构，考虑不同场地条件、主体结构隔震以及二次结构不同阻尼比的影响，计算各层的楼面绝对加速度与相对位移反应谱。分析表明，主体结构隔震或同时增大二次结构阻尼是取得二次结构较好减振效果的有效途径，主体结构的隔震阻尼不宜太大，主体结构隔震后二次结构对所在楼层位置的敏感性大大降低。 相似文献
16.
This paper describes the identification of finite dimensional, linear, time‐invariant models of a 4‐story building in the state space representation using multiple data sets of earthquake response. The building, instrumented with 31 accelerometers, is located on the University of California, Irvine campus. Multiple data sets, recorded during the 2005 Yucaipa, 2005 San Clemente, 2008 Chino Hills and 2009 Inglewood earthquakes, are used for identification and validation. Considering the response of the building as the output and the ground motion as the input, the state space models that represent the underlying dynamics of the building in the discrete‐time domain corresponding to each data set are identified. The time‐domain Eigensystem Realization Algorithm with the Observer/Kalman filter identification procedure are adopted in this paper, and the modal parameters of the identified models are consistently determined by constructing stabilization diagrams. The four state space models identified demonstrate that the response of the building is amplitude dependent with the response frequency and damping, being dependent on the magnitude of ground excitation. The practical application of this finding is that the consistency of this building response to future earthquakes can be quickly assessed, within the range of ground excitations considered (0.005g–0.074g), for consistency with prior response—this assessment of consistent response is discussed and demonstrated with reference to the four earthquake events considered in this study. Inclusion of data sets relating to future earthquakes will enable the findings to be extended to a wider range of ground excitation magnitudes. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
17.
Seismic damage indices of structure are widely used to quantificationally analyze structural damage levels under earthquake action. In this paper, a five-storey building model and a seventeen-storey building model are established. According to seven typical indices and different earthquake-inputs, a structural damage prediction is performed, with the results showing serious uncertainty of structural damage prediction due to different indices. Understanding of this phenomenon aids the comprehension and application of the results of earthquake damage prediction. 相似文献
18.
应用模糊数学原理,将我国现行建筑抗震设计规范(GB 50011-2001)划分场地类别的依据模糊化,用正态分布作为等效剪切波速与覆盖层厚度的隶属函数,对不同场地条件特征周期值进行模糊综合评判,给出了高层建筑结构地震作用计算步骤。结果表明,模糊综合评判方法使得建筑抗震设计中的设计反应谱更符合实际,高层建筑结构地震作用的计算更为准确。 相似文献
19.
This paper presents estimates of wavenumbers of propagating waves in a seven-story reinforced concrete building in Van Nuys, California, using recorded response to four earthquakes. The phase velocities inferred from these wavenumbers are consistent from one earthquake to another. They are also consistent, inside the building, with independent estimates of the shear wave velocities in the building (e.g. using ambient vibration tests), and along the base, with phase velocities of Love waves typical for San Fernando Valley. 相似文献
20.
A Probabilistic Displacement-based Vulnerability Assessment Procedure for Earthquake Loss Estimation 总被引：8，自引：3，他引：5
Earthquake loss estimation studies require predictions to be made of the proportion of a building class falling within discrete damage bands from a specified earthquake demand. These predictions should be made using methods that incorporate both computational efficiency and accuracy such that studies on regional or national levels can be effectively carried out, even when the triggering of multiple earthquake scenarios, as opposed to the use of probabilistic hazard maps and uniform hazard spectra, is employed to realistically assess seismic demand and its consequences on the built environment. Earthquake actions should be represented by a parameter that shows good correlation to damage and that accounts for the relationship between the frequency content of the ground motion and the fundamental period of the building; hence recent proposals to use displacement response spectra. A rational method is proposed herein that defines the capacity of a building class by relating its deformation potential to its fundamental period of vibration at different limit states and comparing this with a displacement response spectrum. The uncertainty in the geometrical, material and limit state properties of a building class is considered and the first-order reliability method, FORM, is used to produce an approximate joint probability density function (JPDF) of displacement capacity and period. The JPDF of capacity may be used in conjunction with the lognormal cumulative distribution function of demand in the classical reliability formula to calculate the probability of failing a given limit state. Vulnerability curves may be produced which, although not directly used in the methodology, serve to illustrate the conceptual soundness of the method and make comparisons with other methods. 相似文献