共查询到20条相似文献，搜索用时 593 毫秒
1.
采用复合材料力学分析方法,针对规则节理岩体考虑坐标转换及刚度系数,建立各向异性等效弹性参数的解析公式。通过算例证明了解析公式的可行性,同时对规则节理岩体等效参数规律性进行了研究,分析在不同的节理刚度比值下等效弹性参数的变化规律。结合白鹤滩坝址区柱状节理岩体特征,探讨了其等效弹性参数取值和各向异性特征。研究表明：所采用方法在刚度取值相等时岩体可退化为各向同性介质,且该方法计算结果与实测结果较为吻合;同时发现柱体偏转对等效弹性参数的影响较大,偏转后水平向和铅直向弹性模量分别降低约54%和17%,根据曲线规律性,偏转角度越大,降低程度越高,等效弹性参数的曲线变化反映了其具有明显的各向异性特征。 相似文献
2.
Egor V. Dontsov 《国际地质力学数值与分析法杂志》2019,43(2):519-529
This study investigates parametric space of solutions for a planar hydraulic fracture propagating in a homogeneous anisotropic rock. It is assumed that the fracture has an elliptical shape and is driven by a power-law fluid. The purpose of this study is to investigate the influence of anisotropy and power-law fluid rheology on the parametric space of solutions. Rock anisotropy is represented by having two values of fracture toughness, one in the vertical direction and another one in the horizontal direction. Similarly, the effect of elastic anisotropy is approximated by using two different effective elastic moduli in the vertical and horizontal directions. In contrast to the isotropic case, for which there are four limiting solutions, the problem for anisotropic rocks features six different limiting cases. These cases represent competition between toughness and viscosity in the vertical and horizontal directions and competition between fluid storage inside the fracture and fluid leak-off into formation. Approximate expressions for the limiting solutions are obtained using global volume balance and tip asymptotic solutions. Despite the developed solutions rely on a series of approximations, they precisely capture all the scaling laws associated with the problem. Zones of applicability of these limiting solutions are calculated, and their dependence on the problem parameters is investigated. 相似文献
3.
致密岩石纵横波波速各向异性的比较研究 总被引：2，自引：0，他引：2
通过对板岩、千枚岩、糜棱岩和变质砂岩等4种岩石在平行和垂直层理、板理的3个正交方向上的纵、横波波速试验,提出了致密岩石纵波波速的各向异性与横波波速的各向异性普遍存在着一致性和差异性两种特征。一致性特征主要表现为致密岩石的横波各向异性随纵波各向异性的增强而增强;差异性特征主要表现为在平行和垂直层理、板理的两个方向上,纵波波速的各向异性指数大于横波,亦即纵波波速的各向异性比横波更为显著。从横观各向同性弹性介质的波速方程出发,通过具体的算例对这两种特征进行了较好的理论分析。 相似文献
4.
To explore the relationship between the dominant direction of micro-cracks and the anisotropy, this research focuses on the micro-crack initiation and propagation mechanism and the anisotropic parameters evolution in the rock under uniaxial compression. Based on the maximum circumferential stress theory and the assumption of shear slip leading to the local tensile stress, the micro-crack initiation and propagation model is established, and the anisotropic parameters of rock is further explored. To verify the theory, the marble limestone, granite porphyry and granite are selected to conduct uniaxial compression experiment. It is indicated that the experimental results of elastic moduli and Poisson’s ratio are well consistent with theoretical analysis. Finally, the relationship between the dominant direction of original and secondary micro-cracks and the effect of the micro-cracks’ dominant direction on practical engineering are discussed. The results show that the dominant direction of micro-cracks is parallel to the maximum principal stress under uniaxial compression, which leads to the anisotropy of rock. With the increase of stress, the axial and transverse elastic moduli would decrease, while the extent of the decrease of axial elastic modulus is larger. The axial Poisson’s ratio would increase and the transverse Poisson’s ratio will decrease. Moreover, the Poisson’s ratio is more sensitive to the anisotropy caused by the dominant direction of micro-cracks. 相似文献
5.
结构面是影响岩体弹性模量的主要因素。基于岩体结构面参数统计,结合岩体应变能推导出的节理岩体本构关系,能够真实地反映岩体弹性模量的弱化和各向异性。在此基础上,以吉图珲铁路隧道围岩为例,研究了岩体弹性模量特征及影响因素。结果表明,该岩体弹性模量的弱化和各向异性程度随应力轴线与结构面法线的夹角而变化,并在夹角值为54.5°时达到最大;同时,岩体弹性模量的弱化与结构面内摩擦角和黏聚力成反相关,与结构面平均半径和密度呈正相关。当结构面半径超过3 m时,岩体弹性模量弱化趋于稳定。应力环境对弹性模量同样有影响,围压的增大,可使岩体弹性模量增大,同时减小了其各向异性和弱化的程度。当围压达到2.32 MPa时,各向异性及弱化现象消失。 相似文献
6.
节理的存在是岩体明显区别于岩石的一个重要特征,也是导致岩体具有非均质性及各向异性的一个重要因素。节理岩体在爆炸冲击荷载作用下的破坏特征不仅是岩体力学研究的一个热点问题,也是岩石爆破领域经常遇到的一个工程问题。目前,常用的有限元和离散元等数值方法都不能很客观地反映岩体中节理分布的实际规律,而最新出现的数值流形方法则完全能够按照岩体中节理的实际分布规律进行建模,并能够很好地模拟岩体在外力作用下新裂纹的产生及已有节理的开裂。对3种不同节理岩体,即无节理岩体、均布水平节理岩体、均布垂直节理岩体等在均布垂直于圆周方向上的冲击荷载作用下的破坏过程进行了模拟。由模拟结果可以明显看出,节理的存在对岩体的破坏型式起到了关键性的控制作用。对于完整岩体,其破坏型式呈现出了很好的对称性;而对于水平及垂直节理岩体,其破坏型式在很大程度上受到节理分布的控制。研究结果对岩石爆破工程设计具有一定的指导意义。 相似文献
7.
针对柱状节理岩体的构造特性,采用水泥砂浆等材料制作出具有不同柱体倾角且含有横向节理分布的柱状节理岩体模型,并通过单轴压缩试验,研究柱体倾角和横向节理对岩体各向异性力学特性及破坏机制的影响。结果表明：试样峰值强度和变形模量随柱体倾角变化曲线均近似为U形,并体现出典型的各向异性特征;随着柱体倾角的变化,试样单轴压缩破坏模式可分为垂直于柱体轴向的劈裂破坏、沿纵向节理面的剪切滑移破坏、滑移破坏与劈裂破坏同时发生的复合破坏和平行于柱体轴向的劈裂破坏4类;横向节理的存在降低了柱状节理岩体沿柱轴方向的完整性,并影响了劈裂破坏裂纹的分布与扩展,因此,横向节理切割柱体是影响柱状节理岩体承载能力的重要因素。 相似文献
8.
J.L. Knill 《Engineering Geology》1972,6(4):289-312
The Cruachan Underground Power Station was constructed at a depth of about 300 m between 1961 and 1965 within the granitic rocks of the Etive granite ring complex in the southwest Highlands of Scotland. The rock mass is a solid intrinsically strong material with a moderately high residual stress, the ratio between the horizontal and vertical stresses being approximately 1.2/1. The discontinuity system consists of a cuboidal arrangement of fractures. The major joint set parallels a fault which crosses the construction site and such joints are coated by weak, chloritic minerals. The influence of the joints and the natural stress distribution on the stability of the rock mass, and the techniques of stabilisation are described and illustrated. 相似文献
9.
Fracture data available for one of the rock masses (limestone) in the dam site of Yujian River Reservoir were used to build and validate a stochastic 3-D fracture network model, and to perform a REV and equivalent continuum study in 3-D. A number of relations are developed in the paper between the rock mass mechanical parameters and fracture tensor components in 3-D. Based on the mechanical parameter values obtained in every 45° direction in 3-D, the principal parameter values, principal directions and tensors are developed for rock mass mechanical parameters to represent the REV block size properties. An incrementally linear elastic, orthotropic constitutive model is suggested to represent the equivalent continuum pre-failure mechanical behavior of the jointed rock mass by incorporating the effect of joint geometry network by the fracture tensor components. 相似文献
10.
台山核电站边坡爆破振动监测及数值模拟研究 总被引：1，自引：0，他引：1
台山核电站场平一期边坡的稳定性直接关系到电站的顺利建设及核电站运营期间的安全。通过现场爆破振动监测,分析了爆破开挖时边坡的振动速度衰减规律, 发现爆区上方马道内侧质点振动速度随高程增加存在放大效应,并且这种放大效应在水平径向比垂直向更为显著;另外,在爆区上方第1级马道内侧,质点垂直向振动速度一般比水平径向振动速度大,平均为其1.5倍左右,而后随着应力波向坡体传播,垂直向速度迅速衰减,而水平径向速度衰减相对较慢,到第3级马道内侧,质点水平径向速度已和垂直向持平或略大。同时,结合三维离散元数值软件(3DEC)进行数值模拟,对边坡在爆破荷载作用下质点振动速度、位移以及塑性区状态进行分析,并与现场监测结果进行比较。结果表明,数值计算值与实测值误差在15%以内;在爆破荷载作用下边坡各级马道外侧顶点产生永久位移,但均较小,且趋于稳定;塑性区仅限于爆区周围,边坡整体是稳定的 相似文献
11.
柱状节理岩体原位变形试验力学浅析与模拟 总被引：1，自引：0，他引：1
在白鹤滩坝址区柱状节理岩体原位变形试验成果的基础上,针对节理刚度的取值进行讨论,利用柔性中心孔试验值反算得到柱状节理岩体节理面刚度值。岩体变形是由岩块和节理两部分组成,分析含单节理岩体概念模型的单轴加、卸载规律性和其变形特性,发现其滞回特性是节理力学行为造成的;推导得到了岩体变形计算公式,可用于多组相交节理岩体等效弹性模量的计算,能够反映出节理岩体的各向异性特征;建立了柱状节理随机模型,采用离散元方法和反算的刚度值进行了仿真分析,得到等效变形参数在试验结果范围内。 相似文献
12.
SummaryThe Influence of Rock Anisotropy on Stress Measurements by Overcoring Techniques A medium is anisotropic if its properties vary with direction. This is the general characteristic of many rocks, for example, schists, slates, gneisses, phyllites and other metamorphic rocks. Bedded and regularly jointed rocks also display anisotropic behavior.This paper is concerned with the influence of rock anisotropy on in-situ stress measurements. It is limited, to stress measurements by overcoring techniques for which strains and displacements are recorded either on the walls of a pilot hole at the end of one or several boreholes or within instrumented solid or hollow inclusions perfectly bonded to the surface of the pilot hole. The rock is described as homogeneous, continuous, anisotropic and linearly elastic.The following questions are answered with special emphasis on rocks that can be classed as transversely isotropic or orthotropic: the number of independent measurements obtainable in a single borehole; the number of boreholes required to determine the in-situ stress field; the influence of rock anisotropy on these numbers; the influence of the anisotropy type and the error involved by neglecting rock anisotropy.With 5 Figures 相似文献
13.
Layered rock masses can be modelled either as standard, orthotropic continua if the layer bending can be neglected or as Cosserat continua if the influence of layer bending is essential. This paper presents a finite element smeared joint model based on the Cosserat theory. The layers are assumed to be elastic with equal thickness and equal mechanical properties. All the cosserat parameters are expressed through the elastic properties of layers, layer thickness and joint stiffness. Plastic-slip as well as tensile-opening of layer interface (joint) are accounted for in a manner similar to the conventional non-associative plasticity theory. As an application, the behaviour of an excavation in a layered rock mass is examined. The displacement and stress fields given by smeared joint models based on the Cosserat continuum and the conventional anisotropic continuum approaches are compared with those obtained from the discrete joint model. The conventional anisotropic continuum model is found to break-down completely when the effective shear modulus in the direction parallel to layering is low in comparison to the shear modulus of the intact layer, whereas the Cosserat model is found to be capable of accurately reproducing complex load–deflection patterns irrespective of the differences in shear moduli. © 1998 John Wiley & Sons, Ltd. 相似文献
14.
针对工程实际中断续节理裂隙岩体的损伤本构模型,假设岩石微元强度服从Weibull随机分布,以摩尔-库仑破坏准则作为描述微元强度的表示方法,推导出细观损伤变量。利用能量和断裂力学理论,综合考虑节理几何特征及力学特性,推导宏观损伤变量计算公式。基于Lemaitre应变等效假设,考虑宏细观缺陷耦合作用,推导出复合损伤变量,建立了基于摩尔-库仑准则的宏细观缺陷耦合作用的断续裂隙岩体损伤本构模型。研究结果表明：（1）采用摩尔-库仑准则作为描述微元强度的统计分布变量建立的损伤模型能够较好地反映岩石内部缺陷分布和变形特征,该模型真实地反映岩石微元强度受应力状态的影响。（2）该模型建立的理论曲线与断续节理岩体的试验曲线吻合较好。（3）节理裂隙岩体宏观损伤变量及峰值强度随节理倾角的变化规律与综合考虑宏细观耦合作用下的损伤变量及裂隙岩体峰值强度随节理倾角的变化规律基本一致。（4）宏细观耦合作用下的等效弹性模量与节理贯通率呈非线性负相关;在节理倾角一定的情况下,损伤变量与节理长度呈非线性正相关;在贯通率较小时,岩体的宏观损伤变量与内摩擦角的关系呈线性负相关变化,贯通率达到一定程度,线性关系变成非线性关系。 相似文献
15.
In nature, there exist several forms of anisotropy in rock masses due to the presence of bedding planes, joints, and weak layers. It is well understood that the anisotropic properties of jointed rock masses significantly affect the stability of surface and underground excavations. However, these critical anisotropic characteristics are often ignored in existing uniaxial dynamic failure criteria. This study investigates the effect of a pre-existing persistent joint on the rate-dependent mechanical behaviours of a rock mass using a particle mechanics approach, namely, bonded particle model (BPM), to realistically replicate the mechanical response of the rock mass. Firstly, in order to capture the rate-dependent response of the jointed rock mass, the BPM model is validated using published experimental data. Then, a dynamic strength model is proposed based on the Jaeger criterion and simulation results. To further investigate the dynamic behaviours, the dynamic uniaxial compressive strength (UCS) for anisotropic rock masses with various joint orientations is investigated by subjecting the BPM models to uniaxial compression numerical tests with various strain rate. The proposed dynamic strength model is validated based on numerical simulation results. Finally, the fragmentation characteristics of the jointed rock masses are analysed, which demonstrate that the failure mode affects the dynamic UCS. This is further confirmed by the analysis of the orientations of microscopic cracks generated by the compression loading. 相似文献
16.
实际工程中,岩体的应力变化状态非常复杂,并不只是简单的加载或者卸荷,如水利工程中的大坝,当坝基开挖时其力学条件主要表现为开挖方向的卸荷(其他方向有可能卸荷,也有可能加载),而坝体修筑以后,力学条件又主要表现为加载。因此,对卸荷损伤后的岩体再次加载时的力学性质进行研究具有十分重要的工程意义。通过三轴卸荷及卸荷损伤后加载破坏试验,研究了不同围压下,含断续预制节理岩体经过不同程度卸荷损伤后再次加载时的力学特性。研究结果表明:围压对于含断续节理岩体变形模量影响不明显,岩体弹性模量与围压没有明显关系,相同围压下节理岩体弹性模量和变形模量均显著低于完整岩体:节理岩样峰值应变随着围压的增大线性增大,二者之间有较好的相关性,相比于完整岩样,节理岩体峰值应变随围压增大增长更快:围压越低,卸荷对岩体强度的影响越大,随着围压增加,卸荷量不同造成岩样的损伤差异逐渐减小。 相似文献
17.
This paper presents a coupled, elastoplastic, finite element and boundary element method for the two-dimensional, non-linear analysis of anisotropic jointed rock. The non-linear and anisotropic behaviour of a jointed rock mass is simulated by representing the mass as an equivalent anisotropic, elastoplastic continuum, so that the influence of the jointing system is ‘smeared’ across the continuum, i.e. the individual joints are not modelled as discrete entities. Numerical examples have been solved to verify the capability, accuracy and efficiency of the present technique. The proposed technique has also been applied to the analysis of tunnel excavation problems in plane strain. The effects of anisotropy and non-linearity of the jointed rock mass during excavation have been investigated in some detail. 相似文献
18.
In this paper a coupled finite and boundary element formulation is developed for the analysis of excavation in jointed rock. The presence of joints in the rock mass has been included implicitly by treating it as an appropriate anisotropic elastic continuum. The boundary element formulation for an anisotropic medium is briefly discussed. Good agreement has been found between numerical and analytical solutions for several example problems, demonstrating the accuracy of the present formulation. Numerical solutions are also presented for the problems of a deep circular tunnel and a basement excavated in a variety of jointed rock masses. 相似文献
19.
土颗粒的形状及其空间方位的择优取向是导致宏观土体各向异性的重要原因之一。以具有明显各向异性的晚更新世马兰黄土为研究对象,借助Quanta FEG型电子显微镜扫描照片所包含的相关信息,揭示其微结构在水平向和垂直向上的差异,并对该微观结构的各向异性成因进行了分析。发现:(1)水平向和垂直向切片中颗粒的圆形度R_0具有正态分布特征,无论垂直向还是水平向土壤颗粒均以次圆形、圆形和非常圆颗粒为主。(2)水平方向切片中颗粒的方位角具有一定的WN-ES的优势方向,而垂直向切片中土颗粒的长轴有与地面平行的优势取向,且埋深越深这种趋势越明显。(3)水平切片中土颗粒的各向同性性质更为显著,而垂直向切片中颗粒的各向异性性质更为突出,且随埋深的增加,各向异性增强。(4)水平向和垂直向切片中颗粒总的概率分布基本表现为随机分布,粉粒在数量上占绝对优势是导致这种无序分布的重要原因,相对于粉粒而言细砂则可在一定程度上体现其排列具有方向性。分析表明,颗粒的方位角和各向异性率对黄土微观各向异性具有较好的指示作用。同时,颗粒的方向性对黄土高原的古气候也具有重要研究意义。 相似文献
20.
节理岩体几何结构非常复杂,研究其渗流特性对于指导含水岩层稳定性分析具有重要价值。应用离散裂隙网络模型DFN方法,基于VC++6.0软件平台,建立了平面渗流分析方法,分析了节理岩体不同几何分布情况下的渗透率张量特征,通过定义渗流定向性系数对岩体渗流的定向性特征进行了定量分析。结果表明：单组节理岩体渗流具有明显的各向异性特征,渗流定向性随着节理角度变化显著;节理随着节理贯通性增加,节理渗透率呈现对数增加趋势;两组节理情况下,各向异性特征随着节理组间夹角变化;两组节理岩体渗流特征研究中,正交分布下,岩体仍存在各向异性,但渗流定向性系数较低;当节理倾角服从正态分布时,随着节理倾角标准差增大,渗透率增加;两组节理夹角不同时,节理渗透主方向倾角随着夹角增大而相应增大,基本沿两组节理夹角方向的角平分线方向。 相似文献