首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 78 毫秒
1.
On hillslopes and agricultural fields, discrete areas of intense, localized soil erosion commonly take place in the form of migrating headcuts. These erosional features significantly increase soil loss and landscape degradation, yet the unsteady, transient, and migratory habits of headcuts complicate their phenomenological and erosional characterization. Here a unique experimental facility was constructed to examine actively migrating headcuts typical of upland concentrated flows. Essential components of the facility include a deep soil cavity with external drainage, rainfall simulator, capacity for overland flow, and a video recording technique for data collection. Results from these experiments show that： （1） after a short period of adjustment, headcut migration attained a steady-state condition, where the rate of migration, scour hole geometry, and sediment discharge remain constant with time; （2） boundary conditions of higher rates of overland flow, steeper bed slopes, and larger initial headcut heights produced systematically larger scour holes with higher rates of soil erosion; and （3） during migration, the turbulent flow structure within the scour hole remained unchanged, consisting of an overfall nappe at the brink transitioning into a reattached wall jet with two recirculation eddies within the plunge pool. The systematic behavior of headcut development and migration enabled the application of modified jet impingement theory to predict with good success the characteristics of the impinging jet, the depth of maximum scour, the rate of headcut migration, and the rate of sediment erosion. These laboratory data and the analytical formulation can be used in conjunction with soil erosion prediction technology to improve the management of agricultural areas impacted by headcut development and ephemeral gully erosion.  相似文献   

2.
Many concepts have been proposed to explain hydrologic connectivity of hillslopes with streams. Hydrologic connectivity is most often defined by qualitative assessment of spatial patterns in perched water tables or soil moisture on hillslopes without a direct linkage to water flow from hillslopes to streams. This form of hydrologic connectivity may not explain the hydrologic response of catchments that have network(s) of preferential flow paths, for example, soil pipes, which can provide intrinsic connectivity between hillslopes and streams. Duplex soils are known for developing perched water tables on hillslopes and fostering lateral flows, but the connectivity of localized perched water tables on hillslopes with soil pipes has not been fully established. The objectives of this study were to characterize pipeflow dynamics during storm events, the relationships between perched water tables on hillslopes and pipeflows, and their threshold behaviour. Two well‐characterized catchments in loess soil with a fragipan were selected for study because they contain multiple, laterally extensive (over 100 m) soil pipe networks. Hillslopes were instrumented with shallow wells adjacent to the soil pipes, and the wells and pipe collapse features were equipped with pressure transducers. Perched water tables developed on hillslopes during a wetting up period (October–December) and became well connected spatially across hillslope positions throughout the high flow period (January–March). The water table was not spatially connected on hillslopes during the drying out (April–June) and low flow (July–September) periods. Even when perched water tables were not well‐connected, water flowing through soil pipes provided hydrologic connectivity between upper hillslopes and catchment outlets. Correlations between soil pipeflow and perched water tables depended on the size and location of soil pipes. The threshold relationship between available soil‐moisture index plus storm precipitation and pipeflow was dependent on the season and strongest during dry periods and not high‐flow seasons. This study demonstrated that soil pipes serve as a catchment backbone of preferential flow paths that provide intrinsic connectivity between upper hillslopes and streams.  相似文献   

3.
Preferential flow pathways, such as soil pipes, are usually present in the soil of slopes. Subsurface flow through the soil pipes affects the subsurface drainage system and is responsible for sediment removal from slopes. However, a record of the inner structure of soil pipes has rarely been reported for slopes. A fibrescope examination of the morphology and flow phases in soil pipes in hillslopes underlain by a Quaternary sand–gravel formation provided the following information: the main pores of the soil pipes ran mostly parallel with the slope gradient; the cross‐sections of the soil pipes were approximately circular; and occurred on a few occasions; with some triple junctions being present. In addition, both full flow and partly full‐depth conditions occurred simultaneously in the soil pipe. The full flow condition has long been used in hydrological studies to model the pipe flow mechanism. Both the full flow condition and the partly full‐depth condition, however, must be examined closely in order to evaluate the subsurface hydrology in heterogeneous soil and the hydrogeomorphological processes of subsurface hydraulic erosion. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

4.
NUMERICAL SIMULATION OF HEAD-CUT WITH A TWO-LAYERED BED   总被引：1，自引：0，他引：1  
1INTRODUCTION The rate of gully erosion is dominated by the upstream migration of existing nick-points called headcut.Due to the shape of the headcut,the flow from the upstream channel impinges into the pool of the scour hole and forms a complex three-dimensional flow structure.The turbulent flow deepens the scour hole,transports the eroded material downstream,undercuts the headcut wall and creates gravitational slumping of the gully head material.In reality,the occurrence of a head cut i…  相似文献   

5.
Headcut, known as knickpoint migration too, is developed due to sudden change in channel bed followed by bed scour and erosion which progressing upstream. The results are the downstream morphological change and transporting massive sediment to the downstream reservoir. Most of the past studies focus on non-cohesive soils, although many problems occur because of cohesive soils. In this study, 10 different samples of cohesive soils in long term consolidation with different composition of silt and clay were tested under different circumstances of waterfall height and flow velocity to investigate the neck migration rate and the sediment yield. Tests were continued to reach a constant migration rate. One of the effective phenomena in all tests was tensional cracks on soil surface. The size and number of these cracks have inverse relation with percent of clay. Because of these cracks, massive erosion occurs at the beginning of all tests. By reducing percent of clay, headcut, waterfall height and sediment yield were increased and by reducing waterfall height and flow velocity these parameters were reduced. In lower percent of clay, headcut erosion will occur quickly with more slants. Caving phenomenon was not observed in any tests and massive erosion rate was more quickly.  相似文献   

6.
An analytic investigation of the effect of surface seal mechanical properties, overland flow, and subsurface hydrology was performed on headcut development. Headcut growth rates on upland areas have been observed to be quite small （less than 0.00015 meter per second） and that they occur in increments in which chips break off at points where cracks have developed in surface seals. The substrate soil under the seal collapses and is removed by the flow. This mode of headcut development is the result of a strong interaction between the surface and the subsurface processes. The surface process is energetically controlled by the mechanical features of the seal whereas the subsurface process is hydrologically controlled. The analysis yields estimates of the temporal scale of headcut velocities. In cases of infiltration from the vertical gully wall into the substrate, the flexural wave velocity （seismic sound velocity） was found to inversely affect headcut velocity.  相似文献   

7.
Sediment load plays a major role in the morphological evolution of rivers.Therefore,the analysis of the sediment load interaction with hydraulic structures is of main importance in order to enhance the preservation of fish habitats and river morphological characteristics.The present study analyzes the scour mechanisms downstream of a block ramp in live bed conditions,when the sediment supplied by the approaching flow is balanced by the sediment transported out of the scour hole.Experiments were performed in a model flume and the effect of the approaching sediment concentration on the scour geometry was analyzed.It was observed that the scour features depend deeply on the approaching sediment concentration and four main profile configurations were distinguished.The experimental data were analyzed and empirical relationships were developed in order to evaluate the depth and length of a scour hole,the dune height and the distance of the transversal section of maximum dune height from the ramp toe for different hydraulic and geometric conditions.It was also proved that the dynamic equilibrium shape of a scour hole does not depend on the sediment load time history.  相似文献   

8.
Gully erosion is a major cause of soil loss and severe land degradation in sub-humid Ethiopia. The objective of this study was to investigate the role and the effect of subsurface water level change on gully headcut retreat, gully formation and expansion in high rainfall tropical regions in the Ethiopian highlands. During the rainy seasons of 2017–2019, the expansion rate of 16 fixed gullies was measured and subsurface water levels were measured by piezometers installed near gully heads. During the study period, headcut retreats ranged from 0.70 to 2.35 m, with a mean value of 1.49 ± 0.56 m year−1, and average depth of the surface water level varied between 1.12 and 2.82 m, with a mean value of 2.62 m. Gully cross-section areas ranged from 2.90 to 20.90 m2, with an average of 9.31 ± 4.80 m2. Volumetric retreat of gully headcuts ranged from 4.49 to 40.55 m3 and averaged 13.34 ± 9.10 m3. Soil loss from individual gullies ranged from 5.79 to 52.31 t year−1 and averaged 17.21 ± 11.74 t year−1. The headcut retreat rate and sediment yield were closely related over the three study seasons. Elevated subsurface water levels facilitated the slumping of gully banks and heads, causing high sediment yield. When the soil was saturated, bank collapse and headcut retreat were favoured by the combination of elevated subsurface water and high rainfall. This study indicates that area exclosures are effective in controlling subsurface water level, thus reducing gully headcut retreat and associated soil loss.  相似文献   

9.
To quantify the changes in flow energy, sediment yield and surface landform impacted by headcut height during bank gully erosion, five experimental platforms were constructed with different headcut heights ranging from 25 to 125 cm within an in situ active bank gully head. A series of scouring experiments were conducted under concentrated flow and the changes in flow energy, sediment yield and surface landform were observed. The results showed that great energy consumption occurred at gully head compared to the upstream area and gully bed. The flow energy consumption at gully heads and their contribution rates increased significantly with headcut height. Gully headcuts also contributed more sediment yield than the upstream area. The mean sediment concentrations at the outlet of plots were 2.3 to 7.3 times greater than those at the end of upstream area. Soil loss volume at gully heads and their contribution rates also increased with headcut height significantly. Furthermore, as headcut height increased, the retreat distance of gully heads increased, which was 1.7 to 8.9 times and 1.1 to 3.2 times greater than the incision depth of upstream area and gully beds. Positive correlations were found between energy consumption and soil loss, indicating that energy consumption could be used to estimate soil loss of headcut erosion. Headcut height had a significant impact on flow energy consumption, and thus influenced the changes in sediment yield and landform during the process of gully headcut erosion. Headcut height was one of the important factors for gully erosion control in this region. Further studies are needed to identify the role of headcut height under a wide condition. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

10.
The installation of free falling jet grade control structures has become a popular choice for river bed stabilization. However, the formation and development of scour downstream of the structure may lead to failure of the structure itself. The current approaches to scour depth prediction are generally based on studies conducted with the absence of upward seepage. In the present study, the effects of upward seepage on the scour depth were investigated. A total of 78 tests without and with the application of upward seepage were carried out using three different sediment sizes, three different tailwater depths, four different flow discharges, and four different upward seepage flow discharge rates. In some tests, the three-dimensional components of the flow velocity within the scour hole were measured for both the cases with and without upward seepage. The scour depth measured for the no-seepage results compared well with the most accurate relationship found in the literature. It was found that generally the upward seepage reduced the downward velocity components near the bed, which led to a decrease in the maximum scour depth. A maximum scour depth reduction of 49% was found for a minimum tailwater depth, small sediment size, and high flow discharge. A decay of the downward velocity vector within the jet impingement was found due to the upward seepage flow velocity. The well known equation of D’Agostino and Ferro was modified to account for the effect of upward seepage, which satisfactorily predicted the experimental scour depth, with a reasonable average error of 10.7%.  相似文献   

11.
Subsurface flow can be an important process in gully erosion through its impact on decreasing soil cohesion and erosion resistance as soil water content or pressure increases and more directly by the effects of seepage forces on particle detachment and piping. The development of perched water tables fosters lateral flow that can result in seepage at the surface and/or formation of soil pipes by internal erosion of preferential flow paths. Continued internal erosion of soil pipes can lead to gullies, dam and levee failures. However, the processes involved in particle and aggregate detachment from soil pipe walls and transport processes within soil pipes have not been well studied or documented. This paper reviews the limited research on sediment detachment and transport in macropores and soil pipes and applies the knowledge learned from the much more extensive studies conducted on streams and industrial pipes to hydrogeologic conditions of soil pipes. Knowledge gaps are identified and recommendations are made for future research on sediment detachment and transport in soil pipes. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

12.
PROCESSES OF HEADCUT GROWTH AND MIGRATION IN RILLS AND GULLIES   总被引：1，自引：0，他引：1  
lINTRoDUCTIONHeadcuterosionwithinrills,ephemeralguIlies,classicgullies,andstreamscausesseriousenvironmentalproblems.Headcuterosionacceleratesthelossoftopsoilanddecreasestheproductivityofagriculturallands.Erodedsedimentsoftenendupinreceivingstreams,causingwaterqualityproblemsandnegativelyimpactingbioIogicalprocesses.Inadditiontolandscapedegradation,gulliesarethedominantformofdamagetoearthspillways.lfagullycanmovethroughanearthspillwayandbreachthecrestofadam,thentheimpoundedfloodwaterswiI1…  相似文献   

13.
1INTRODUCTION A headcut is a vertical or near-vertical drop or discontinuity on the channel bed of a stream,rill or gully,at which a free overfall flow often occurs,as shown in Fig.1.A headcut is usually eroded by the action of hydraulic stress,basal sapping,weathering,or the combination of these processes.Headcut erosion can accelerate soil loss,increase sediment yields in streams,damage earthen spillways,and disturb bank stability.Therefore,the prediction of headcut migration is a very …  相似文献   

14.
Soil loss rates due to piping erosion   总被引：1，自引：0，他引：1  
Compared with surface soil erosion by water, subsurface erosion (piping) is generally less studied and harder to quantify. However, wherever piping occurs, it is often a significant or even the main sediment source. In this study, the significance of soil loss due to piping is demonstrated through an estimation of soil volume lost from pipes and pipe collapses (n = 560) in 137 parcels under pasture on loess‐derived soils in a temperate humid climate (Belgium). Assuming a period of 5 to 10 years for pipe collapse to occur, mean soil loss rates of 2.3 and 4.6 t ha?1 yr?1 are obtained, which are at least one order of magnitude higher than surface erosion rates (0.01–0.29 t ha?1 yr?1) by sheet and rill erosion under a similar land use. The results obtained for the study area in the Flemish Ardennes correspond well to other measurements in temperate environments; they are, however, considerably smaller than soil loss rates due to subsurface erosion in semi‐arid environments. Although local slope gradient and drainage area largely control the location of collapsed pipes in the study area, these topographic parameters do not explain differences in eroded volumes by piping. Hence, incorporation of subsurface erosion in erosion models is not straightforward. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

15.
Glenn Wilson 《水文研究》2011,25(15):2354-2364
The role of soil pipeflow in ephemeral gully erosion is not well understood. Experiments were conducted on continuous soil pipes to better understand the role of internal erosion of soil pipes and its relation to ephemeral gully development. Soil beds of 140 cm length, 100 cm width and 20 cm depth had a single soil pipe of different initial sizes (2, 4, 6, 8, and 10 mm diameter) extend from a water reservoir to the outlet. Experiments were run on Providence silt loam and Smithdale loam soils under a constant head of 15 cm established for 30 min. Either the tunnel collapsed or the head could not be maintained. Soil pipes that were initially 2 and 4 mm clogged instantaneously at their mouth and did not exhibit flow, whereas, pipes initially ≥ 6 mm enlarged by 268, 397, and 699% on average for the 6, 8, and 10 mm diameters, respectively. Critical shear stress values were found to be essentially zero, and erodibility values gave erosion indexes that were extremely high. The rapid internal erosion resulted in erratic flow and sediment concentrations with periods of no flow as pipes were temporarily clogged followed by surges of high flow and high sediment concentrations. Tensiometers within 6 cm of the soil pipes did not exhibit pressure increases typically associated with pipe clogging. Flow through 10 mm diameter soil pipes exhibited tunnel collapse for both soils tested. Tunnel collapse typically occurred within minutes of flow establishment suggesting that ephemeral gullies could be misinterpreted as being caused by convergent surface flow if observations were made after the runoff event instead of when flow is first established through soil pipes. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

16.
The interactions between overland flow hydraulics and sediment yield were studied in flume experiments on erodible soil surfaces covered by rock fragments. The high erodibility of a non-cohesive fine sediment (D50 + 0·09mm) permitted the effects of local turbulence and scour on sediment yield to be examined. Overland flow hydraulics and sediment yield were compared for experiments with pebble (D50 + 1·5cm) and cobble (D50 + 8·6cm) rock fragment covers. Cover percentages range from 0 to 99 per cent. Rock fragment size strongly affects the relations between flow hydraulics and rock fragment cover. For pebbles spatially-averaged hydraulic parameters (flow velocity, flow depth, effective flow width, unit discharge, total shear stress, Darcy-Weisbach friction factor, percentage grain friction and grain shear stress) vary most rapidly within cover percentages at low covers (power functions). In contrast, for cobbles these parameters vary most rapidly within cover percentages at high covers (exponential functions). As the type of the function that describes the relation between flow hydraulics and cover percentage can be deduced from the ratio of rock fragment height to flow depth, the continuity equation can be employed to determine the actual coefficients of the functions, provided the regression of one hydraulic parameter (e.g. flow velocity) with cover percentage is known and a good estimate exists for two values of another hydraulic variable for a low and a high cover percentage. The variation of sediment yield with cover percentage is also strongly dependent on rock fragment size, but neither the convex-upward relation for pebbles, nor the positive relation for cobbles can be solely attributed to the spatially averaged hydraulics of sheet-flow. Rock fragments induce local turbulence that leads to scour hole development on the stoss side of the rock fragments while deposition commonly occurs in the wake. This local scour and deposition substantially affects sediment yield. However, scour dimensions cannot be predicted by spatially averaged flow hydraulics. An adjustment of existing scour formulas that predict scour around bridge piers is suggested. Sediment yield from non-cohesive soils might then be estimated by a combination of sediment transport and scour formulas.  相似文献   

17.
Different hydraulic gradients, especially due to seepage or drainage, at different locations on a hillslope profile may have a profound effect on the dominant erosion processes. A laboratory study was designed to simulate hillslope processes and quantify effects of surface hydraulic gradients on erosion for a Glynwood clay loam soil (fine, illitic, mesic Aquic Hapludalf). A 5 m long, 1·2 m wide soil pan was used at 5 and 10 per cent slopes with an external watering tube to vary the soil bed's hydrological conditions. Different combinations of slope steepness with seepage or drainage gradients were used to simulate the hydrologic conditions on a 5 m segment of a hillslope profile. Runoff samples were taken during rainfall-only and rainfall with added inflow. Results showed that, under drainage conditions, interrill processes dominated and rilling was limited. The surface contained scattered crescent-shaped pits after the run. Under seepage conditions, rilling processes dominated and the inflow introduced at the top of the soil pan further accelerated the headward erosion of the rills. Erosion rates increased by as much as 60 times under seepage conditions representative of the lower backslope when compared to drainage conditions that generally occur at the upper backslope. This indicated that rills and gullies on backslopes and footslopes may be catalysed or enhanced by seepage conditions rather than form from flow hydraulic shear stress alone. An understanding of spatial and temporal changes that affect both hillslope hydrology and erosional processes is needed to develop accurate process-based erosion prediction models. This knowledge may lead to different management practices on landscape positions where seepage occurs. © 1998 John Wiley & Sons, Ltd.  相似文献   

18.
Sediment transport capacity, Tc, defined as the maximum amount of sediment that a flow can carry, is the basic concept in determining detachment and deposition processes in current process-based erosion models. Although defined conceptually and used extensively in modelling erosion, Tc was rarely measured. Recently, a series of laboratory studies designed to quantify effects of surface hydrologic conditions on erosion processes produced data sets feasible to evaluate the concept of Tc. A dual-box system, consisting of 1·8 m long sediment feeder box and a 5 m long test box, was used. Depending on the relative magnitudes of sediment delivery from feeder and test boxes, five scenarios are proposed ranging from deposition-dominated to transport-dominated sediment regimes. Results showed that at 5 per cent slope under seepage or 10 per cent slope under drainage conditions, the runoff from the feeder box caused in the additional sediment transport in the test box, indicating a transport-dominated sediment regime. At 5 per cent slope under drainage conditions, deposition occurred at low rainfall intensities. Increases in slope steepness, rainfall intensity and soil erodibility shifted the dominant erosion process from deposition to transport. Erosion process concepts from the Meyer–Wishmeier, Foster–Meyer and Rose models were compared with the experimental data, and the Rose model was found to best describe processes occurring during rain. A process-based erosion model needs to have components that can represent surface conditions and physical processes and their dynamic interactions. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

19.
Rill development studies have focused almost exclusively on surface erosion processes and critical threshold hydraulic conditions. Characteristic rill features, such as arcuate headcuts and knickpoints, are morphologically similar to the ‘theatre-headed’ valleys which have been associated with ‘sapping’ processes at various scales. This paper reports on laboratory experiments designed to identify linkages between surface flow hydraulics, subsurface moisture conditions and rill development. Experiments were carried out in a 16·57 m2 flume under simulated rainfall with soil samples up to 0·15 m depth in which moisture conditions were monitored by miniature time-domain reflectometer probes. Tests showed complex responses in which some rill incision reflected surface flow conditions, but major rill system development with markedly enhanced sediment yield was closely associated with high soil moisture contents. It was not possible to measure seepage forces directly, but calculation and observation indicate that these were less important than reduction in soil strength with saturation, which resulted in increased effective runoff erosivity. This caused concentrated undercutting along the water table at rill walls, while slightly stronger surface layers above the water table formed microscarps. These retreated along the water table into interrill surfaces, producing residual pediment transport slopes. The microscarps eventually disappeared when the water table reached the surface, eliminating differential soil strength. The experiments showed complex relationships between surface and subsurface erosional processes in evolving rill systems, strongly influenced by soil moisture dynamics. The very small topographic and hydraulic head amplitudes indicate that seepage forces and ‘sapping’ were minimal. The dominant effect of soil moisture was reduction of soil strength with saturation, and increased runoff entrainment. Experimental conditions were not unusual, either for agricultural fields or natural hillslopes, and the intricate interrelationship of surface and subsurface erosion processes observed is probably not uncommon. Attempts to link specific morphologic features at rill scale to dominance of surface or subsurface processes alone are therefore unlikely to be successful or reliable. © 1998 John Wiley & Sons, Ltd.  相似文献   

20.
The collapse of soil pipes due to internal erosion can result in fully mature gullies. Few studies have measured the rates of sediment detachment and transport through soil pipes in situ. The objectives of this work were to determine suspended sediment concentration (SSC) in soil pipes as a function of pipeflow rate to develop sediment rating curves (SRC) and measure the bedload transport as a function of cumulative flow per storm event. H-flumes were installed in seven discontinuous gullies formed by pipe collapse and instrumented for pipe discharge measurements and suspended sediment sampling. The typical response to pipeflow was an initial flush of high concentration of suspended sediment followed by a decrease as pipeflow increased (rising limb of hydrograph). Pipeflows were often so dynamic that it was difficult to consistently capture the initial flush of sediment, resulting in weak to non-existent SRCs. The falling limb of the hydrograph tended to have a relatively low SSC. Thus, soil pipe SRCs tended to be better represented by hysteretic SRCs, although relationships between SSC and flow rate were poorly represented by SRCs. A power law equation given by SSC = aQb was adopted to represent the SRC relationships. Fitting this equation to data showed a correlation between the offset, a, and the slope, b, with the slope decreasing as the offset increases. Both SRC parameters (a and b) were correlated to the contributing area of the individual pipe. Bedload appeared to be an important contributor to sediment transport, with bedload – expressed as an average event sediment concentration (mg l−1) – decreasing as the volume of the event discharge (m3) increased. A significant portion (11–31%) of the bedload material was gravel and aggregates (>2 mm diameter material). While this work was the first to determine SRCs for soil pipes, refined sampling and measurement techniques are needed. © 2020 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号