首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The back-arc region of the Izu-Bonin arc has complex bathymetric and structural features, which, due to repeated back-arc rifting and resumption of arc volcanism, have prevented us from understanding the volcano-tectonic history of the arc after 15 Ma. The laser-heating 40Ar/39Ar dating technique combined with high density sampling of volcanic rocks from the back-arc region of this arc successfully revealed the detailed temporal variation of volcanism related to the back-arc rifting. Based on the new 40Ar/39Ar dating results: (1) Back-arc rifting initiated at around 2.8 Ma in the middle part of the Izu-Bonin arc (30°30′N–32°30′N). Volcanism at the earliest stage of rifting is characterized by the basaltic volcanism from north–south-trending fissures and/or lines of vents. (2) Following this earliest stage of volcanism, at ca. 2.5 Ma, compositionally bimodal volcanism occurred and formed small cones in the wide area. This volcanism and rifting continued until about 1 Ma in the region west of the currently active rift zone. (3) After 1 Ma, active volcanism ceased in the area west of the currently active rift zone, and volcanism and rifting were confined to the currently active rift zone. The volcano-tectonic history of the back-arc region of the Izu-Bonin arc is an example of the earliest stage of back-arc rifting in the oceanic island arc. Age data on volcanics clearly indicate that volcanism changed its mode of activity, composition and locus along with a progress of rifting.  相似文献   

2.
An exceptionally well-exposed, ancient, intra-arc basin in the Permian Takitimu Group of New Zealand contains 14 km of interbedded primary volcanic and marine volcaniclastic rocks of basaltic to rhyodacitic composition. These are the products of subaerial and submarine arc volcanism and closely associated turbidite sedimentation. The Takitimu oceanic arc/basin setting formed a dynamic closed sedimentary system in which large volumes of volcaniclastic material generated at the arc was rapidly redeposited in marine basins flanking the eruptive centres. Volcanism probably included (1) moderate- to deep-water extrusion of lava and deposition of hyaloclastite, (2) extrusive and explosive eruptions from shallow marine to marginally emergent volcanoes in or on the margin of the basin, and (3) Plinian and phreato-Plinian eruptions from more distant subaerial vents along the arc. Much of the newly erupted material was rapidly transported to the adjacent marine basin by debris flows, slumping and sliding. Hemipelagic sedimentation predominated on the outer margin of the basin, infrequently interrupted by deposition of ash from the most explosive arc volcanism and the arrival of extremely dilute turbidites. Turbidite sedimentation prevailed in the remainder of the basin, producing a thick prograding volcaniclastic apron adjacent to the arc. The volcaniclastic strata closely resemble classic turbidite deposits, and show similar lateral facies variations to submarine fan deposits. Study of such sequences provides insight into poorly understood processes in modern arc-related basins.  相似文献   

3.
The three-dimensional arrangement of volcanic deposits in strike-slip basins is not only the product of volcanic processes, but also of tectonic processes. We use a strike-slip basin within the Jurassic arc of southern Arizona (Santa Rita Glance Conglomerate) to construct a facies model for a strike-slip basin dominated by volcanism. This model is applicable to releasing-bend strike-slip basins, bounded on one side by a curved and dipping strike-slip fault, and on the other by curved normal faults. Numerous, very deep unconformities are formed during localized uplift in the basin as it passes through smaller restraining bends along the strike-slip fault. In our facies model, the basin fill thins and volcanism decreases markedly away from the master strike-slip fault (“deep” end), where subsidence is greatest, toward the basin-bounding normal faults (“shallow” end). Talus cone-alluvial fan deposits are largely restricted to the master fault-proximal (deep) end of the basin. Volcanic centers are sited along the master fault and along splays of it within the master fault-proximal (deep) end of the basin. To a lesser degree, volcanic centers also form along the curved faults that form structural highs between sub-basins and those that bound the distal ends of the basin. Abundant volcanism along the master fault and its splays kept the deep (master fault-proximal) end of the basin overfilled, so that it could not provide accommodation for reworked tuffs and extrabasinally-sourced ignimbrites that dominate the shallow (underfilled) end of the basin. This pattern of basin fill contrasts markedly with that of nonvolcanic strike-slip basins on transform margins, where clastic sedimentation commonly cannot keep pace with subsidence in the master fault-proximal end. Volcanic and subvolcanic rocks in the strike-slip basin largely record polygenetic (explosive and effusive) small-volume eruptions from many vents in the complexly faulted basin, referred to here as multi-vent complexes. Multi-vent complexes like these reflect proximity to a continuously active fault zone, where numerous strands of the fault frequently plumb small batches of magma to the surface. Releasing-bend extension promotes small, multivent styles of volcanism in preference to caldera collapse, which is more likely to form at releasing step-overs along a strike-slip fault. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

4.
Fumitoshi  Murakami 《Island Arc》1996,5(1):25-42
Abstract Seven back-arc rifts are recognized in the Izu-Ogasawara Arc, namely, the Hachijo, the Aogashima, the Myojin, the Sumisu, the Torishima, the Sofu and the Nishinoshima Rifts from north to south. The acoustic stratigraphy is divided into three units (Units A, B and C) based on the seismic reflection profiles crossing the rifts. The structure of the rifts systematically changes from a half-graben type to a full graben type in the back-arc rifts from the Hachijo Rift to the Torishima Rift. The Hachijo and the Aogashima Rifts have a structure of half-graben, and the Myojin Rift has both structural characteristics of a half-graben and a full graben. The Sumisu and the Torishima Rifts are an asymmetric full graben. The Sofu and the Nishinoshima Rifts have different structural characteristics from the remaining rifts, from the Hachijo Rift to the Torishima Rift. The boundary faults in the back-arc rifts from the Hachijo to the Torishima Rifts cut to Unit B. Unit B correlates with volcaniclastic sediments during pre-rift volcanism between 4 and 2 Ma. The pre-rift volcanism was probably widespread on the northern Izu-Ogasawara Arc as is the present arc volcanism. These factors suggest that the beginning of rifting is dated at some time after 2 Ma. The developing process of the rift consists of three stages; (i) a sag stage in the crust at the location of the large offset boundary fault; (ii) a stage of half-graben formation; (iii) a stage of full graben formation. The offset of the boundary faults becomes larger from the Hachijo Rift to the Torishima Rift and the east-west width of the rifts also widens to the south. This is presumably because the Hachijo Rift is an earlier rifting stage than the Sumisu and the Torishima Rifts. The more primitive structure in the rifting stage from the Torishima Rift to the Hachijo Rift is probably caused by the propagation of rifting from south to north. The structural difference between the rifts in the northern part and the Sofu and the Nishinoshima Rifts seems to be due to structural differences in the crust between the northern and the southern parts from the tectonic gap.  相似文献   

5.
The relationship between structure and volcanism in the Tongariro Volcanic Centre, New Zealand, is largely masked by a mantle of young volcanic deposits. Here we report the results of an integrated geophysical investigation (using gravity, multi-level aeromagnetic and magnetotelluric methods) of subsurface deposits and structures in the upper 1–2 km across the axis of the Tongariro Volcanic Centre. Modelling of these data across the Tama Lakes saddle shows that the outcropping volcanic deposits are up to 800 m thick, underlain by Tertiary sediments (of a few 10's to a few 100 m in thickness) and in turn lying above a basement of probable Mesozoic greywacke. Basement faulting is shown to be concentrated in the centre of the rift, which is 18 km wide at this location, but no vertical offset is resolved at the rift axis. Vertical displacements on basement faults of 250–300 m are modelled giving a minimum total basement subsidence of 650 m. A 5 km-wide, deep low resistivity zone occurs at the axis of the rift which is interpreted as either resulting from extensive fracturing and/or hydrothermal alteration within the basement. Steep-sided volcanic bodies with a high proportion of lavas/dykes coincide with the Waihi fault and the rift axis. Coincidence with the Waihi Fault suggests that this fault system may have provided magma pathways to the surface and a focus for dyke emplacement, which could have contributed to rift extension. The lack of offset at the rift axis may reflect the juvenile nature of faulting at this location, which is consistent with the notion of a migration of faulting towards the centre of the graben, alternatively, rifting may have been entirely accommodated by dyke emplacement.  相似文献   

6.
Combined paleomagnetic and structural research was carried out in the Mura-Zala Basin including the western and southern surrounding hills in northeastern Slovenia. The Mura-Zala Basin was formed due to ENE–WSW trending crustal extension in the late Early Miocene (18.3–16.5 Ma). First, marine sedimentation took place in several more or less confined depressions, then in a unified basin. During thermal subsidence in the late Miocene deltaic to fluvial sediments were deposited. After sedimentation, the southernmost, deepest depression was inverted. Map-scale folds, reverse and strike-slip faults were originated by NNW–SSE compression. This deformation occurred in the latest Miocene–Pliocene and is reflected also in the magnetic fabric (low field susceptibility anisotropy). After this folding, the Karpatian sediments of the Haloze acquired magnetization, then suffered 30° counterclockwise rotation relative to the present north (40° counterclockwise with respect to stable Europe). This Pliocene (Quaternary?) rotation affected a wide area around the Mura-Zala Basin. The latest Miocene to Quaternary folding and subsequent rotation may be connected to the counterclockwise rotation of the Adriatic microplate.  相似文献   

7.
Abstract Multi- and single-channel seismic profiles are used to investigate the structural evolution of back-arc rifting in the intra-oceanic Izu-Bonin Arc. Hachijo and Aoga Shima Rifts, located west of the Izu-Bonin frontal arc, are bounded along-strike by structural and volcanic highs west of Kurose Hole, North Aoga Shima Caldera and Myojin Sho arc volcanoes. Zig-zag and curvilinear faults subdivide the rifts longitudinally into an arc margin (AM), inner rift, outer rift and proto-remnant arc margin (PRA). Hachijo Rift is 65 km long and 20–40 km wide. Aoga Shima Rift is 70 km long and up to 45 km wide. Large-offset border fault zones, with convex and concave dip slopes and uplifted rift flanks, occur along the east (AM) side of the Hachijo Rift and along the west (PRA) side of the Aoga Shima Rift. No cross-rift structures are observed at the transfer zone between these two regions; differential strain may be accommodated by interdigitating rift-parallel faults rather than by strike- or oblique-slip faults. In the Aoga Shima Rift, a 12 km long flank uplift, facing the flank uplift of the PRA, extends northeast from beneath the Myojin Knoll Caldera. Fore-arc sedimentary sequences onlap this uplift creating an unconformity that constrains rift onset to ～1-2Ma. Estimates of extension (～3km) and inferred age suggest that these rifts are in the early syn-rift stage of back-arc formation. A two-stage evolution of early back-arc structural evolution is proposed: initially, half-graben form with synthetically faulted, structural rollovers (ramping side of the half-graben) dipping towards zig-zagging large-offset border fault zones. The half-graben asymmetry alternates sides along-strike. The present ‘full-graben’ stage is dominated by rift-parallel hanging wall collapse and by antithetic faulting that concentrates subsidence in an inner rift. Structurally controlled back-arc magmatism occurs within the rift and PRA during both stages. Significant complications to this simple model occur in the Aoga Shima Rift where the east-dipping half-graben dips away from the flank uplift along the PRA. A linear zone of weakness caused by the greater temperatures and crustal thickness along the arc volcanic line controls the initial locus of rifting. Rifts are better developed between the arc edifices; intrusions may be accommodating extensional strain adjacent to the arc volcanoes. Pre-existing structures have little influence on rift evolution; the rifts cut across large structural and volcanic highs west of the North Aoga Shima Caldera and Aoga Shima. Large, rift-elongate volcanic ridges, usually extruded within the most extended inner rift between arc volcanoes, may be the precursors of sea floor spreading. As extension continues, the fissure ridges may become spreading cells and propagate toward the ends of the rifts (adjacent to the arc volcanoes), eventually coalescing with those in adjacent rift basins to form a continuous spreading centre. Analysis of the rift fault patterns suggests an extension direction of N80°E ± 10° that is orthogonal to the trend of the active volcanic arc (N10°W). The zig-zag pattern of border faults may indicate orthorhombic fault formation in response to this extension. Elongation of arc volcanic constructs may also be developed along one set of the possible orthorhombic orientations. Border fault formation may modify the regional stress field locally within the rift basin resulting in the formation of rift-parallel faults and emplacement of rift-parallel volcanic ridges. The border faults dip 45–55° near the surface and the majority of the basin subsidence is accommodated by only a few of these faults. Distinct border fault reflections decreases dips to only 30° at 2.5 km below the sea floor (possibly flattening to near horizontal at 2.8 km although the overlying rollover geometry shows a deeper detachment) suggesting that these rifting structures may be detached at extremely shallow crustal levels.  相似文献   

8.
Taupor volcanic zone (TVZ) is the currently active volcanic arc and back-arc basin of the Taupo-Hikurangi arc-trench system, North Island, New Zealand. The volcanic arc is best developed at the southern (Tongariro volcanic centre) end of the TVZ, while on the eastern side of the TVZ it is represented mainly by dacite volcanoes, and in the Bay of Plenty andesite/dacite volcanoes occur on either side of the Whakatane graben. The back-arc basin is best developed in the central part of the TVZ and comprises bimodal rhyolite and high-alumina basalt volcanism. Widespread ignimbrite eruptions have occurred from this area in the past 0.6 Ma. Normal faults occur in both arc and back-arc basin. They are generally steeply dipping (>40°) and strike between 040° and 080°. In the back-arc basin, fault zones are en echelon and have the same trend as alignments of rhyolite domes and basalt vents. Open fissures have formed during historic earthquakes along some of the faults, and geodetic measurements on the north side of Lake Taupo suggest extension of 14±4 mm/year. In the Bay of Plenty and ML=6.3 earthquake occurred on 2 March 1987. Modelling of known structure in the area together with data derived from this earthquake suggests block faulting with faults dipping 45°±10° NW and a similar dip is suggested by seismic profiling of faults offshore of the Bay of Plenty where extension is estimated to be 5±2 mm/year. To the east of the TVZ, the North Island shear belt (NISB) is a zone of reverse-dextral, strike-slip faults, the surface expression of which terminates at the eastern end of the TVZ. On the opposite side of the TVZ in the offshore western Bay of Plenty and on line with the NISB is the Mayor Island fault belt. If the two fault belts were once continuous, as seems likely, strike-slip faults probably extend through the basement of the TVZ. When extension associated with the arc and back-arc basin is combined with these strike-slip faults, the resulting transtension provides a suitable tectonic environment for caldera formation and voluminous ignimbrite eruptions in the back-arc basin. The types of volcano in the TVZ are considered to be related to the source of magma and overlying crustal structure. Lavas of the arc are probably formed by a multistage process involving (1) subsolidus slab dehydration, (2) anatexis of the mantle wedge, (3) fractionation and minor crustal assimilation and (4) magma mixing. High-alumina basalts of the back-arc basin may be derived by partial melting of peridotite at the top of the mantle wedge, while rhyolitic magmas are thought to come from partial melting of lavas and subvolcanic reservoirs associated with the southern end of the Coromandel volcanic zone. Extreme thinning associated with transtension in the back-arc basin will favour the eruption of large-volume, gas-rich ignimbrites accompanied by caldera formation.  相似文献   

9.
Abstract Bahía Concepción is located in the eastern coast of the Baja California peninsula and it is shaped by northwestern–southeastern normal faults. These are associated with a 12–6 Ma rifting episode, although some have been reactivated since the Pliocene. The most abundant rocks correspond to the arc related Comondú Group, Oligocene to Miocene, which forms a mainly calc‐alkaline volcanic and volcaniclastic sequence. There are less extensive outcrops of sedimentary rocks, lava flows, domes and pyroclastic rocks of Pliocene to Quaternary ages. The Neogene volcanism in the area indicates a shift from a subduction regime to an intraplate volcanism related to continental extension and the opening of an oceanic basin. The Bahía Concepción area contains numerous Mn ore deposits, being the biggest at El Gavilán and Guadalupe. The Mn deposits occur as veins, breccias and stockworks, and are composed by Mn oxides (pyrolusite, coronadite, romanechite), dolomite, quartz and barite. The deposits are hosted in volcanic rocks of the Comondú Group and, locally, in Pliocene sedimentary rocks. Thus, the Mn deposits formed between the Middle Miocene and the Pliocene. The mineralized structures are associated with Miocene northwestern–southeastern fault systems, which are analogous to those associated with the Cu‐Co‐Zn‐Mn deposits of El Boleo. The Bahía Concepción area also bears subaerial and submarine hot springs, which are associated with the same fault systems and host rocks. The submarine and subaerial geothermal manifestations south of the bay are possibly related with recent volcanism. The geothermal manifestations within the bay are intertidal hot springs and shallow submarine diffuse venting areas. Around the submarine vents (5–15 m deep, 87°C), Fe‐oxyhydroxide crusts with pyrite and cinnabar precipitate. In the intertidal vents (62°C), aggregates of opal, calcite, barite and Ba‐rich Mn oxides occur covered by silica‐carbonate stromatolitic sinters. Some 10–30 cm thick crustiform veins formed by chalcedony, calcite and barite are also found close to the vents. The hydrothermal fluids exhibit mixed isotopic compositions between δ18O‐enriched meteoric and local marine water. The precipitation of Ba‐rich Mn oxides around the vent sites could be an active analog for the processes that produced Miocene to Pliocene hydrothermal Mn‐deposits.  相似文献   

10.
A bimodal volcanic suite with KAr ages of 0.05–1.40 Ma was collected from the Sumisu Rift using alvin. These rocks are contemporaneous with island arc tholeiite lavas of the Izu-Ogasawara arc 20 km to the east, and provide a present day example of volcanism associated with arc rifting and back-arc basin initiation. Major element geochemistry of the basalts is most similar to that of basalts found in other, more mature back-arc basins, which indicates that back-arc basins need not begin their magmatic evolution with lavas bearing strong arc signatures.Volatile concentrations distinguish Sumisu Rift basalts from island arc basalts and MORB. H2O contents, which are at least four times greater than in MORB, suppress plagioclase crystallization. This suppression results in a more mafic fractionating assemblage, which prevents Al2O3 depletion and delays the initiation of Fe2O3(tot) and TiO2 enrichment. However, unlike arc basalts,Fe3+/ΣFe ratios are only slightly higher than in MORB and are insufficient to cause magnetite saturation early enough to suppress Fe2O3(tot) and TiO2 enrichment. Thus, major element trends are more similar to those of MORB than arcs.H2O, CO2 and S are undersaturated relative to pure phase solubility curves, indicating exsolution of an H2O-rich mixed gas phase. HighH2O/S, highδD, and low (MORB-like)δ34S ratios are considered primary and distinctive of the back-arc basin setting.  相似文献   

11.
Among the Sinian to Triassic strata in South China, the stratiform, quasi-stratiform and lenticular metallic deposits in association with hydrothermal sedimentation mainly occur in the four periods: (1) the Sinian Datangpo interglacial period, (2) the early period of Early Cambrian, (3) the late period of Middle Devonian to early period of Late Devonian,and (4) the late period of Early Permian. The four mineralization periods all happened around the maximum flooding period in the third-order seal-level cycle during the ascending stage in the first-order sea-level cycle. The deep seawater layer, starved and non-compensatory basin, low sedimentary rate, and low energy and anoxic environment during the maximum flooding period are very suitable for the formation and preservation of large to superlarge hydrothermal sedimentary deposits. The maximum flooding period also coincided with the intensified regional tectonism, extensive deep magmatism and hydrothermal sedimentation, which provide, for the formation of large to superlarge hydrothermal sedimentary deposits through the rapid accumulation of hydrothermal sediments, the needed dynamics, ore-forming materials and favorable passway for hydrothermal fluids to enter the basin.  相似文献   

12.
Among the Sinian to Triassic strata in South China, the stratiform, quasi-stratiform and lenticular metallic deposits in association with hydrothermal sedimentation mainly occur in the four periods: (1) the Sinian Datangpo interglacial period, (2) the early period of Early Cambrian, (3) the late period of Middle Devonian to early period of Late Devonian, and (4) the late period of Early Permian. The four mineralization periods all happened around the maximum flooding period in the third-order seal-level cycle during the ascending stage in the first-order sea-level cycle. The deep seawater layer, starved and non-compensatory basin, low sedimentary rate, and low energy and anoxic environment during the maximum flooding period are very suitable for the formation and preservation of large to superlarge hydrothermal sedimentary deposits. The maximum flooding period also coincided with the intensified regional tectonism, extensive deep magmatism and hydrothermal sedimentation, which provide, for the formation of large to superlarge hydrothermal sedimentary deposits through the rapid accumulation of hydrothermal sediments, the needed dynamics, ore-forming materials and favorable passway for hydrothermal fluids to enter the basin.  相似文献   

13.
Sumisu volcano was the site of an eruption during 30–60 ka that introduced ∼48–50 km3 of rhyolite tephra into the open-ocean environment at the front of the Izu-Bonin arc. The resulting caldera is 8 × 10 km in diameter, has steep inner walls 550–780 m high, and a floor averaging 900 m below sea level. In the course of five research cruises to the Sumisu area, a manned submersible, two ROVs, a Deep-Tow camera sled, and dredge samples were used to study the caldera and surrounding areas. These studies were augmented by newly acquired single-channel seismic profiles and multi-beam seafloor swath-mapping. Caldera-wall traverses show that pre-caldera eruptions built a complex of overlapping dacitic and basaltic edifices, that eventually grew above sea level to form an island about 200 m high. The caldera-forming eruption began on the island and probably produced a large eruption column. We interpret that prodigious rates of tephra fallback overwhelmed the Sumisu area, forming huge rafts of floating pumice, choking the nearby water column with hyperconcentrations of slowly settling tephra, and generating pyroclastic gravity currents of water-saturated pumice that traveled downslope along the sea floor. Thick, compositionally similar pumice deposits encountered in ODP Leg 126 cores 70 km to the south could have been deposited by these gravity currents. The caldera-rim, presently at ocean depths of 100–400 m, is mantled by an extensive layer of coarse dense lithic clasts, but syn-caldera pumice deposits are only thin and locally preserved. The paucity of syn-caldera pumice could be due to the combined effects of proximal non-deposition and later erosion by strong ocean currents. Post-caldera edifice instability resulted in the collapse of a 15° sector of the eastern caldera rim and the formation of bathymetrically conspicuous wavy slump structures that disturb much of the volcano’s surface.  相似文献   

14.
Abstract Extensional basin formation and subsequent basin inversion in the southern area of the eastern margin of the Japan Sea were studied on the basis of the interpretation of seismic profiles (total length approximately 15 000 km) and the fossil analyses of 77 sea-bottom samples. Rift (Early to Early Middle Miocene), post-rift (Middle to Late Miocene), pre-inversion (Late Miocene to Pliocene) and inversion stages (Pliocene to Quaternary) were differentiated by the extension and contraction of the crust. Many small-scale rifts were formed in the Sado Ridge and the Mogami Trough during the rift stage, simultaneous with back-are spreading of the Japan Sea. Most of the rifts were east- or southeast-facing, rotational half-grabens bounded by west-dipping normal faults at their eastern boundaries. The syn-rift sequence can be divided into lower and upper units by an erosional surface. The sequences are presumed to be composed mainly of fining-upward sediments. The trend of most rifts is north-northeast with the remainder being of east-northeast-bias. The north-northeast trending rifts are distributed widely in the Sado Ridge and Mogami Trough and do not show an en échelon arrangement, suggesting that they were formed mainly by pure extension nearly perpendicular to the arc. The east-northeast trending rifts are presumed to have been developed by a north-northwest extension in the late rift stage, which may have accompanied a right-lateral movement in the eastern margin of the Japan Sea. During the post-rift stage, the rifts and adjacent horsts subsided and became covered by the post-rift sequence, characterized by parallel and continuous reflections. This suggested no significant tectonic movements in this period. In the pre-inversion stage many of the rifts subsided again, presumably because of down-warping due to weak compressional stress. The normal faults reactivated as reverse faults during the inversion stage due to an increase in compressional stress. Many of the rifts have been uplifted and transformed into east-vergent asymmetric anticlines. The basin inversion is greatest in the Sado Ridges and in the Dewa Bank Chain, while it is least developed in the Mogami Trough and in the western slope of the Sado Ridge, in which some normal faults have not been reactivated. The increase and decrease of the inversion corresponds to the peak and trough of undulation at an interval of about 50 km trending parallel to the arc.  相似文献   

15.
Off the southern coast of Hokkaido the Hidaka-oki (offshore Hidaka) basin has developed on the western flank of a collision suture under the influence of long-standing compressional plate motion and provoked tectonic stresses around the northwestern Pacific rim throughout the late Cenozoic. The basin forming history of the Japan arc and Kuril arc collision zone is described on the basis of seismic reflection data interpretation. We identify two stages of basin formation: the older (late Oligocene-Miocene) faulted en echelon graben (pull-apart basin) and younger (Plio-Pleistocene) regional downwarping. Paleoenvironmental changes recorded within the fore-arc sediments indicate that the older basin filled up by the late Miocene. We inferred the volumes of the distinctive basins from the depth-conversion of seismic data, which suggest episodic uplifts and massive erosion of the Hidaka Mountains in the middle-late Miocene and the Plio-Pleistocene. Estimated sediment supply rates into the basins have a similar level for the both stages. Cause of an episodic uplift in the older stage is attributed to the delayed opening of the Japan Sea. The eastern Eurasian margin underwent N-S right-lateral faulting at 25 Ma as a result of rifting of the Kuril back-arc basin. Formation of the Japan Sea back-arc basin since the early Miocene (ca. 20 Ma) caused eastward motion of the western Hokkaido block and transpressive regime along the pre-existing N-S shear deformation zone.  相似文献   

16.
The composition of basalts erupted at the earliest stages in the evolution of a back-arc basin permit unique insights into the composition and structure of the sub-arc mantle. We report major and trace element chemical data and O-, Sr-, Nd-, and Pb- isotopic analyses for basalts recovered from four dredge hauls and one ALVIN dive in the northern Mariana Trough near 22°N. The petrography and major element chemistry of these basalts (MTB-22) are similar to tholeiites from the widest part of the Trough, near 18°N (MTB-18), except that MTB-22 have slightly more K2O and slightly less TiO2. The trace element data exhibit a very strong arc signature in MTB-22, including elevated K, Rb, Sr, Ba, and LREE contents; relatively lowK/Ba and highBa/La andSr/Nd. The Sr- and Nd- isotopic data plot in a field displaced from that of MTB-18 towards Mariana arc lavas, and the Pb-isotopic composition of MTB-22 is indistinguishable from Mariana arc lavas and much more homogeneous than MTB-18. Mixing of 50–90% Mariana arc component with a MORB component is hypothesized. We cannot determine whether this resulted from physical mixing of arc mantle and MORB mantle, or whether the arc component is introduced by metasomatism of MORB-like mantle by fluids released from the subducted lithosphere. The strong arc signature in back-arc melts from the Mariana Trough at 22°N, where the back-arc basin is narrow, supports general models for back-arc basin evolution whereby early back-arc basin basalts have a strong arc component which diminishes in importance relative to MORB as the back-arc basin widens.  相似文献   

17.
Opening of the Japan Sea back arc basin was accompanied by extensional tectonics in the drifting southwest Japan arc. Various trends of Early Miocene grabens in the arc suggest multi-directional rifting, which necessarily involved strike-slip components of some of basin-margin faults. However, such components are not well understood. In this work we conducted a field survey in the Early Miocene Ichishi basin on the northern side of the Median Tectonic Line, central southwest Japan. We found that the basin was a compound of grabens that were formed along normal and sinistral strike-slip faults, the latter of which had northeast–southwest trends. The block faulting in this phase produced basement highs between sub-basins, which were filled with the lower part of the Ichishi Group. We found a low-angle angular unconformity at a middle horizon in the group, with which we define the upper and lower part of the group. The upper part onlapped both the basement highs and the lower part. It means that the transtensional basin formation ceased sometime between 18 and 17.5 Ma in the Ichishi area. The Ichishi basin turned subsequently into a sag basin subsided due to normal faulting probably along the Nunobiki-sanchi-toen fault zone. The transtension and the basin sag were driven by ENE–WSW extensional stress. This arc-parallel extension produced grabens various areas including Ichishi in the Early Miocene. The extensional deformation was eventually localized to the deep rift along the Fossa Magna to make the lithosphere under southwest Japan decoupled from that under northeast Japan. The decoupling allowed the rapid rotation of southwest Japan from ~17.5 Ma. The cluster of those grabens around the Ise bay probably determined the southeastern margin of the Kinki triangle.  相似文献   

18.
A broad zone of dominantly subaerial silicic volcanism associated with regional extensional faulting developed in southern South America during the Middle Jurassic, contemporaneously with the initiation of plutonism along the present Pacific continental margin. Stratigraphic variations observed in cross sections through the silicic Jurassic volcanics along the Pacific margin of southernmost South America indicate that this region of the rift zone developed as volcanism continued during faulting, subsidence and marine innundation. A deep, fault-bounded submarine trough formed near the Pacific margin of the southern part of the volcano-tectonic rift zone during the Late Jurassic. Tholeiitic magma intruded within the trough formed the mafic portion of the floor of this down-faulted basin. During the Early Cretaceous this basin separated an active calc-alkaline volcanic arc, founded on a sliver of continental crust, from the then volcanically quiescent South American continent. Geochemical data suggest that the Jurassic silicic volcanics along the Pacific margin of the volcano-tectonic rift zone were derived by crustal anatexis. Mafic lavas and sills which occur within the silicic volcanics have geochemical affinities with both the tholeiitic basalts forming the ophiolitic lenses which are the remnants of the mafic part of the back-arc basin floor, and also the calc-alkaline rocks of the adjacent Patagonian batholith and their flanking lavas which represent the eroded late Mesozoic calc-alkaline volcanic arc. The source of these tholeiitic and calc-alkaline igneous rocks was partially melted upper mantle material. The igneous and tectonic processes responsible for the development of the volcano-tectonic rift zone and the subsequent back-arc basin are attributed to diapirism in the upper mantle beneath southern South America. The tectonic setting and sequence of igneous and tectonic events suggest that diapirism may have been initiated in response to subduction.  相似文献   

19.
Active thermal areas are concentrated in three areas on Mauna Loa and three areas on Kilauea. High-temperature fumaroles (115–362° C) on Mauna Loa are restricted to the summit caldera, whereas high-temperature fumaroles on Kilauea are found in the upper East Rift Zone (Mauna Ulu summit fumaroles, 562° C), middle East Rift Zone (1977 eruptive fissure fumaroles), and in the summit caldera. Solfataric activity that has continued for several decades occurs along border faults of Kilauea caldera and at Sulphur Cone on the southwest rift zone of Mauna Loa. Solfataras that are only a few years old occur along recently active eruptive fissures in the summit caldera and along the rift zones of Kilauea. Steam vents and hot-air cracks also occur at the edges of cooling lava ponds, on the summits of lava shields, along faults and graben fractures, and in diffuse patches that may reflect shallow magmatic intrusions.  相似文献   

20.
The stratigraphy, tectonic history, petrography and major oxide petrochemistry of the volcanic sequences in the western part of the rift valley in southern Kenya is summarised. Volcanism and rift faulting began 15 and 7 m.y. ago respectively. A recurrent feature of Miocene and Pliocene volcanism was the tendency for salic magmas to be preferentially erupted in the northern part of the area: the accumulation of a northward-thickening Pliocene trachyte pile is particularly notable. Transitional-mildly alkalic basalts and trachytes were erupted only after the onset of rift faulting, from sites within the rift structure, and so can be considered «rift dependent». Nephelinites, melanephelinites, limburgites and phonolites were erupted before and after onset of rift faulting, from sites within and outside the rift structure, and so can be considered «rift independent».  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号