首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 703 毫秒
1.
Alps and Apennines are juxtaposed within an approximately 100 km-wide area covered by the Upper Eocene to Miocene successions of the Tertiary Piedmont Basin. The Upper Eocene–Oligocene evolution of this area was characterized to the north and west by the propagation of the SE-verging Southalpine thrust-fold belt that can be traced from the Po Plain subsurface until the Torino Hill-Saluzzese area, and to the south by a high-angle, broadly E–W oriented megashear zone that led to the juxtaposition of different crustal levels and controlled the development of a mosaic of partly independent sub-basins. Since the latest Oligocene the N-verging Apenninic tectonics prevailed in the collisional system and the Tertiary Piedmont Basin evolved as a wide thrust-top basin, bounded to the north by the N-verging Monferrato arc and characterized by a tectono-sedimentary evolution recording changes of subsidence and shift of depocentres in relation to crustal structures.  相似文献   

2.
The controversial relationship between the orogenic segments of the Western Alps and the Northern Apennines is here explored integrating recently published 3D tomographic models of subduction with new and re-interpreted geological observations from the eclogitic domain of the Voltri Massif (Ligurian Alps, Italy), where the two belts joint each other. The Voltri Massif is here described as an extensional domain accommodating the opposing outward migration of the Alpine and Apennine thrust fronts, since about 30–35 Ma. Using tomographic images of the upper mantle and paleotectonic reconstructions, we propose that this extensional setting represents the surface manifestation of an along strike change in polarity of the subducted oceanic slab whose polarity changed laterally in space and in time. Our tectonic model suggests that the westward shift of the Alpine thrust front from the Oligocene onward was the consequence of the toroidal asthenospheric flow induced by the retreat of the Apenninic slab.  相似文献   

3.
The tectonic evolution of the Mt Amiata volcano-geothermal area is under discussion. Some authors state that this region, as well as the hinterland of the Northern Apennines, were affected by compression from the Cretaceous to the Quaternary. In contrast, most authors believe that extension drove the tectonic evolution of the Northern Apennines from the Early Miocene to the Quaternary. Field data, seismic analyses and borehole logs have been integrated in order to better define the structural features of the continental crust in the Mt Amiata geothermal area. In this paper I propose the hypothesis that the structure of the crust in the Mt Amiata volcano-geothermal area derives from two main geological processes: (1) contractional tectonics related to the stacking of the Northern Apennines (Cretaceous–Early Miocene), (2) subsequent extensional collapse of the hinterland of the mountain chain, and related opening of the Northern Tyrrhenian Sea (Early Miocene–Quaternary). Compressional and extensional structures characterise the Mt Amiata region, although extensional structures dominate its geological framework. In particular the extension produced: (a) Middle-Late Miocene boudinage of the previously stacked tectonic units; (b) Pliocene–Quaternary normal faulting which favoured the emplacement of a magmatic body in the middle-upper crust; and (c) the eruption of the Mt Amiata volcano, which gave rise to an acid and intermediate volcanic complex (0.3–0.19 Ma). The extension produced the space necessary to accommodate the Middle-Late Miocene marine and continental sediments. Pliocene and Quaternary normal and transtensional faults dissected the previous structures and influenced the Early Middle Pliocene marine sedimentation within the structural depressions neighbouring the Mt Amiata volcano. The magmatic body was emplaced at depth (about 6–7 km) during the Pliocene extension, and produced the eruption of the Mt Amiata volcano during the Late Pleistocene. This gave rise to local uplift, presently reaching about 3,000 m, as well as a negative Bouguer anomaly (−16 mgal), both centred on the Mt Amiata area. The crustal dome shows a good correspondence with the convex shape of the regional seismic marker known as the K-horizon, which corresponds to the 450°C isotherm, and the areas with greatest heat flow. This is probably a consequence of the above-cited magmatic body presently in the process of solidification. A Late Pleistocene eruption occurred along a crustal fissure striking N50° (Mt Amiata Fault), which crosscuts the crustal dome. Hydrothermal circulation, proven by the occurrence of thermal springs and gas vents (mainly CO2 and H2S), mainly occurs along the Mt Amiata Fault both in the northeastern ans southwestern sides of the volcano.  相似文献   

4.
Anisotropy of magnetic susceptibility (AMS) represents a valuable proxy able to detect subtle strain effects in very weakly deformed sediments. In compressive tectonic settings, the magnetic lineation is commonly parallel to fold axes, thrust faults, and local bedding strike, while in extensional regimes, it is perpendicular to normal faults and parallel to bedding dip directions. The Altotiberina Fault (ATF) in the northern Apennines (Italy) is a Plio-Quaternary NNW–SSE low-angle normal fault; the sedimentary basin (Tiber basin) at its hanging-wall is infilled with a syn-tectonic, sandy-clayey continental succession. We measured the AMS of apparently undeformed sandy clays sampled at 12 sites within the Tiber basin. The anisotropy parameters suggest that a primary sedimentary fabric has been overprinted by an incipient tectonic fabric. The magnetic lineation is well developed at all sites, and at the sites from the western sector of the basin it is oriented sub-perpendicular to the trend of the ATF, suggesting that it may be related to extensional strain. Conversely, the magnetic lineation of the sites from the eastern sector has a prevailing N–S direction. The occurrence of triaxial to prolate AMS ellipsoids and sub-horizontal magnetic lineations suggests that a maximum horizontal shortening along an E–W direction occurred at these sites. The presence of compressive AMS features at the hanging-wall of the ATF can be explained by the presence of gently N–S-trending local folds (hardly visible in the field) formed by either passive accommodation above an undulated fault plane, or rollover mechanism along antithetic faults. The long-lasting debate on the extensional versus compressive Plio-Quaternary tectonics of the Apennines orogenic belt should now be revised taking into account the importance of compressive structures related to local effects.  相似文献   

5.
塔里木盆地西北缘沙井子构造带断裂构造分析   总被引：5，自引：2，他引：3       下载免费PDF全文
沙井子构造带位于塔里木盆地西北缘,是分隔阿瓦提凹陷和温宿凸起的边界断裂。它是塔里木盆地研究最薄弱的大型断裂构造带之一。根据系统、精细的地震资料解释,沙井子构造带存在3套断裂体系:深部楔状冲断构造、狭义沙井子断裂和浅部的伸张构造。深部楔状冲断构造形成于志留纪—泥盆纪,由北西倾向的主冲断层和南东倾向的反冲断层形成构造楔; 构造楔主要由前寒武纪变质岩组成,冲断前锋楔入于寒武系中部,造成上覆地层向温宿凸起方向的急剧抬升。狭义的沙井子断裂,即通常所说的沙井子断裂,为一条高角度基底卷入型挤压走滑断裂,形成于二叠纪末—三叠纪初,错断了早期的深部冲断楔。浅部的伸展构造形成于第四纪早-中期,为一系列较小规模的正断层,沿狭义沙井子断裂呈右步雁列状排列,构成左行剪切张扭性断裂带。深部的楔状冲断构造和浅部的伸展构造是本次研究的新发现。  相似文献   

6.
In this paper, a scenario for the early evolution of the Jurassic oceanic Liguria-Piemonte basin is sketched. For this purpose, four selected examples of ophiolite sequences from the Northern Apennines and Corsica are described and analyzed. In the External Ligurian units (Northern Apennines), the ocean–continent transition of the Adria plate was characterized by a basement made up of subcontinental mantle and lower continental crust, covered by extensional allochthons of upper crust. Both, the basement rocks and the extensional allochthons are cut by basaltic dikes and covered by basalts and pelagic deposits. The conjugate ocean–continent transition of the Corsica margin, represented by the Balagne nappe (Corsica), was composed of mantle peridotites and gabbros covered by basaltic flows and minor breccias, that in addition include continent-derived clasts. By contrast, the innermost (i.e., closest to the ocean) preserved area observed in the Internal Ligurian (Northern Apennines) and Inzecca (Corsica) units consists of former morphological highs of mantle peridotites and gabbros, bordered by small basins where the basement is covered by a volcano-sedimentary complex, characterized by ophiolitic breccias and cherts interlayered with basaltic flows. The overall picture resulting from our reconstructions suggests an asymmetric architecture for the Liguria-Piemonte basin with a central area bounded by two different transition zones toward the continental margins. This architecture can be interpreted as the result of a rifting process whose development includes a final stage characterized by passive, asymmetric extension of the lithosphere along an east-dipping detachment fault system.  相似文献   

7.
Rheology and seismotectonic regime in the northern central Mediterranean   总被引：4，自引：0，他引：4  
The connection between thermal field and mechanical properties is analysed in the northern central Mediterranean region, extending from the Ligurian-Provençal basin to the Adriatic foredeep. As the thermal regime is still far from equilibrium in most of the tectonic units, transient thermal models are used. The temperature-depth distribution is estimated in four areas affected by the volcanic activity, which from the Neogene to the Present shifted from Corsica to the Apenninic arc. In the Adriatic foredeep, the thermal effects of the recent thrust-faulting phase in the buried sectors of the northern Apennines are taken into account.

The general context consists of convergence involving westward subduction of the Adriatic plate. This process caused anti-clockwise rotation of Corsica and Sardinia, which led to formation of the Ligurian marginal basin, and also resulted in crustal doubling and overthrusting in the northern Apennines and rifting in the northern Tyrrhenian.

Seismic activity is focused in the internal and external zones of the Apenninic arc, where low surface heat flux is observed, and in the western margin of the Ligurian-Provençal basin. This is a consequence not only of lateral variations in the thermal field but also of the different tectonic settings. Regional extensional patterns in the shallow crust, with minimum principal stress axes trending N60°E and E-W, are observed in the northern and in the southern sectors of the Apenninic arc, respectively. A compressional regime at depths greater than 30 km is observed below the northern sector of the arc, while to the south a change in the structure of the lithosphere is marked by a decrease in deeper seismic activity. Thrust faults and strike-slip faults with a thrust component support a compressional regime along the western margin of the Ligurian basin with maximum principal stress axis oriented N120°E.

Two lithospheric cross-sections across the study region are constructed, based on structural, thermal, gravity, rheological and seismic data. There is clear evidence of the presence of the subducting slab of the Adriatic plate, corresponding to a thickening of the uppermost brittle layer. The crustal seismicity cut-off corresponds to temperatures of 320–390°C. A brittle layer of considerable thickness is present in the uppermost mantle beneath Variscan Corsica and the Adriatic foredeep, with estimated seismic cut-off temperature of about 550 ± 50°C.  相似文献   


8.
Middle–Late Pleistocene tectonic activity has been inferred through studies on travertine deposits exposed in a tract of the hinterland Northern Apennines. A detailed study on the relationships between tectonics and travertine deposition coupled with 230Th/234U age determination of travertines at Cava Oliviera quarry, located close to Serre di Rapolano village (southern Tuscany, Northern Apennines), allowed us to recognise Pleistocene faults, whose activity has been referred to 157–24 ka, at least. Travertine deposition was tectonically controlled by WSW-ENE striking, oblique and normal faults, associated to a main fault (named as the Violante Fault). This structure dissected a regional normal fault (known as the Rapolano Fault) Early–Middle Pliocene in age, which bounded the eastern side of the Pliocene Siena Basin, and gave rise to space accommodation for clayey and sandy marine sediments. Hydrothermal circulation (and related travertine deposition) was favoured by the damaging enhancement due to the fault–fault intersection. Tectonic activity has been also documented by deformation recorded by travertines, which suggest a main tectonic event between 64 ± 5 and 40 ± 5 ka. The tectonic activity described for the study area agrees with the Quaternary tectonic evolution documented in the surrounding areas (e.g. Mt. Amiata and Mt. Vulsini), as well as the Tyrrhenian margin of the Central Apennines, indicating that a widespread tectonic activity affected the inner part of the Apennines until the latest Quaternary.  相似文献   

9.
The Apennines comprise a Neogen—Quaternary accretionary prism that shows several anomalies with respect to classic alpine-type mountain belts, namely (i) low elevation, (ii) a shallow new Moho below the core of the belt, (iii) high heat flow in the internal parts, (iv) mainly sedimentary cover involved in the prism, (v) a deep foredeep and (vi) a fully developed back-arc basin. The suction exerted by a relatively eastward migrating mantle can determine the eastward retreat of the subduction zone and an asthenospheric wedging at the retreating subduction hinge. Heat flow, geochemical and seismological data support the presence of a hot mantle wedge underlying the western side of the Apenninic accretionary prism. A thermal model of the belt with foreland dipping isotherms fits with deepening of the seismicity toward the east. Mantle volatiles signatures are also widespread in springs along the Apennines.  相似文献   

10.
F. Piana  R. Polino 《地学学报》1995,7(2):138-143
The relationship between the Alpine and Apenninic orogenic systems is concealed at the surface by Tertiary sediments of two main tectono-stratigraphic units: the 'Alpine-related' Torino Hill domain and the 'Apennines-related' Monferrato domain. Mapping and structural analyses carried out in the area behind the Mio-Pliocene Apenninic-Padane thrust front allow comparison of the kinematic history of the Torino Hill and Monferrato domains. These are separate by the transpressive Tlio Freddo Deformation Zone' (RFDZ), interpreted here as the superficial expression of a crustal discontinuity along which the Alpine metamorphic basement overrode the Apenninic Ligurian nappes during the Palaeogene.
The Western Monferrato structural setting is the result of: (i) Late Oligocene-Burdigalian transpressive tectonics due to lateral displacement between the Alps-related and the Apennines-related domains; and (ii) compressive post-Messinian tectonics related to northward transport along the main Padane thrust front. Post-Messinian tectonic events affected also the NW-vergent asymmetrical Torino Hill anticline.  相似文献   

11.
In this work, we report the results of combined geological, structural, and anisotropy of magnetic susceptibility (AMS) studies carried out on Quaternary deposits in the Picentini Mountains, southern Apennines (Italy). The study concerns four small continental basins, Acerno, Tizzano, Iumaiano, and Piano del Gaudo, related to fluvial–lacustrine depositional environments, ranging in altitude from 600 to 1,200 m a.s.l. and strongly incised during recent time. Stratigraphic and structural analyses, integrated by low- and high-field anisotropy of magnetic susceptibility (AMS), show that the formation of these basins has been controlled by extensional and transtensional tectonics. Most of the AMS sites exhibit a well-defined magnetic foliation parallel to the bedding planes. A well-defined magnetic lineation has also been measured within the foliation planes. In the Iumaiano, Tizzano, and Piano del Gaudo basins, magnetic lineations cluster around NNE–SSW trend and are parallel to the stretching directions inferred by structural analysis of faults and fractures. On the basis of structural, sedimentological, and high-field AMS data, we suggest a tectonic origin for the magnetic lineation, analogously to what has been observed in other weakly deformed sediments from Neogene and Quaternary extensional basins of the Mediterranean region. Our results demonstrate that onset and the evolution of the investigated basins have been mainly controlled since lower Pleistocene by NW–SE normal and transtensional faults. This deformation pattern is consistent with a prevalent NE–SW extensional tectonic regime, still active in southern Apennines, as revealed by seismological and geodetic data.  相似文献   

12.
This work examines the connection between Quaternary tectonics and erosion/incision processes in the primary Tuscan‐Romagna watershed of the Northern Apennines, which essentially coincides with the topographic culmination of the Nero Unit structural ridge. Tectonic and geomorphic information were collected in the area where this ridge is crossed by the upper Tiber River course forming a deep gorge. Structural analysis and field mapping have revealed that the region experienced polyphase tectonics with superposed thrust folding events identifiable both at the map and mesoscopic scales. Hinterland‐SSW‐verging thrusts and thrust‐related folds deformed the whole thrust pile during the latest deformation phase. Backthrusts/backfolds controlled the development of intermountain basins nearby the main watershed during the Early Pleistocene and seemingly deformed, in the Tiber gorge, a low‐relief landscape developed in the Early Pleistocene (ca. 1.1 Ma). Successively, the upper Tiber River course area and Apennines axial zone underwent a generalized uplift, which is manifested by the deep incision of palaeo‐morphologies. This proposed sequence of events correlates well with the major geodynamic change of the Apennines revealed by an acceleration of uplift rates in the Middle–Late Pleistocene. This latter event may also correlate with increased rates of river incision recorded in Europe as a consequence of uplift and/or climate change. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

13.
In this paper we show the seismicity and velocity structure of a segment of the Alpine retro-belt front along the continental collision margin of the Venetian Alps (NE Italy). Our goal is to gain insight on the buried structures and deep fault geometry in a “silent” area, i.e., an area with poor instrumental seismicity but high potential for future earthquakes, as indicated by historical earthquakes (1695 Me = 6.7 Asolo and 1936 Ms = 5.8 Bosco del Cansiglio). Local earthquakes recorded by a dense temporary seismic network are used to compute 3-D Vp and Vp/Vs tomographic images, yielding well resolved images of the upper crust underneath the south-Alpine front. We show the presence of two main distinct high Vp S-verging thrust units, the innermost coincides with the piedmont hill and the outermost is buried under a thick pile of sediments in the Po plain.Background seismicity and Vp/Vs anomalies, interpreted as cracked fluid-filled volumes, suggest that the NE portion of the outermost blind thrust and its oblique/lateral ramps may be a zone of high fluid pressure prone to future earthquakes.Three-dimensional focal mechanisms show compressive and transpressive solutions, in agreement with the tectonic setting, stress field maps and geodetic observations. The bulk of the microseismicity is clustered in two different areas, both in correspondence of inherited lateral ramps of the thrust system. Tomographic images highlight the influence of the paleogeographic setting in the tectonic style and seismic activity of the region.  相似文献   

14.
Geological mapping coupled with structural investigations carried out in the Voltri Massif (eastern Ligurian Alps, Italy) provide new data for the interpretation of the tectonic context controlling main fabric development during exhumation of its high-pressure core. The Voltri Massif is here interpreted as a c. 30 km-long eclogite-bearing, asymmetric dome formed by the progressive verticalisation of the regional, second-phase mylonitic foliation developed during retrogressive greenschist metamorphic conditions. In this light, the exhumation history is driven by a ductile-to-brittle extensional process, operating through low-angle, top-to-the-W multiple detachment systems. A Late Eocene–Early Oligocene age for this extensional episode is proposed on the basis of structural correlations, stratigraphic and radiometric constraints. In this scenario, the Voltri Massif is interpreted as an extensional domain developed to accommodate the Late Eocene–Early Oligocene arching of the Western Alps–Northern Apennines orogenic system.  相似文献   

15.
In the Northern Apennines of Italy, mud-rich olistostromes (sedimentary mélanges) occur at different stratigraphic levels within the late Oligocene–early Miocene sedimentary record of episutural/wedge-top basins. They are widely distributed along the exhumed outer part of the Ligurian accretionary complex, atop the outer Apenninic prowedge, over an area about 300 km long and 10–15 km wide. Olistostromes represent excellent examples of ancient submarine mass-transport complexes (MTCs), consisting of stacked cohesive debris flows that can be directly compared to some of those observed in modern accretionary wedges. We describe the internal arrangement of olistostrome occurrences in the sector between Voghera and the Monferrato area, analysing their relationships with mesoscale liquefaction features, which are commonly difficult to observe in modern MTCs. Slope failures occurred in isolated sectors along the wedge front, where out-of-sequence thrusting, seismicity, and different pulses of overpressured tectonically induced fluid flows acted concomitantly. Referring to the Northern Apennines regional geology, we also point out a gradual lateral rejuvenation (from late Oligocene to early Miocene) toward the SE and an increasing size and thickness of the olistostromes along the strike of the frontal Apenninic prowedge. This suggests that morphological reshaping of the outer prowedge via mass-transport processes balanced, with different pulses over a short time span, the southeastward migration and segmentation of accretionary processes. The latter were probably favoured by the occurrence in the northwestern part of the Northern Apennines of major, inherited palaeogeographic features controlling the northward propagation of the prowedge. Detailed knowledge of olistostromes, as ancient examples of MTCs related to syn-sedimentary tectonics and shale diapirism, and of their lateral variations in term of age and size, provides useful information in regard to better understanding of both the tectono-stratigraphic evolution of the Apenninic prowedge and the submarine slope failures in modern accretionary wedges.  相似文献   

16.
We performed geodetic strain rate analyses in southern Italy, using new GPS velocities. Two-dimensional strain and rotation rate fields were estimated and results show that most of the shortening is distributed in the northern Sicily offshore. Extension becomes more evident and comparable with shortening on the eastern side of the same margin, and greater in the eastern Sicily offshore. Principal shortening and extension rate axes are consistent with long-term geological features: seismic reflection profiles show both active compressive and extensional faults affecting Pleistocene strata. We show evidence for contemporaneous extension and transtension in the Cefalù Basin. Combining geodetic data and geological features point to the coexistence of independent geodynamic processes, i.e., the active E–W backarc spreading in the hangingwall of the Apennines subduction zone and shortening along the southern margin of the Tyrrhenian backarc basin operated by the NNW-motion of Africa relative to Eurasia.  相似文献   

17.
The rocks of the Northern Apennines predominantly consist of non-metamorphic terrigeneous deposits (flysches and molasses) some of which are preorogenic, some synorogenic and others postorogenic with respect to the nappe tectonics (Miocene). As plant fragments frequently occur in these sediments, a study of coal rank based on reflectance measurements on vitrinites (% Rm = mean value of the random reflectance in non polarized light) contributes to the clarification of the relation between the orogenic and the palaeogeothermal development. The determination of the Rm values of more than 180 samples from outcrops and three deep drillings revealed some important features. Within the pile of Liguride and Tuscanide nappes, the coal rank increases from the uppermost nappe to the lower nappes until lowgrade metamorphism is reached in the Lower Tuscanides. In the single nappes the rank decreases from the Tyrrhenian coast (internal zone) towards the Po Plain (external zone). This regional trend is disturbed only locally by young post-coalification tectonics. In the uppermost Liguride nappe (M. Antola Unit) a pre-Oligocene (i. e. pre-Apenninic) thermal event was detected. Postorogenic heating is connected with the magmatic activity of Late Miocene to Pleistocene age in Tuscany. Except for these preorogenic and postorogenic thermal events, the main coalification is generally younger than the emplacement of the nappes in the nappe pile during the Apenninic orogeny in the Miocene, but it is older than the last thrust movements and the final tensional tectonics in the internal zones of the chain. For these reasons, the main regional thermal event has to be considered as synorogenic or, more precisely, as late-synorogenic.  相似文献   

18.
Seismic data from the Alps-Apennines join have usually been interpreted in the form of 2D cross-sections, passing either through the Western Alps or the Ligurian Alps-Monferrato Apennines. However, the oblique SE-NW convergence of Adria and Europa and superimposed rotations imply a distinct 3D kinematic development around the Adriatic Indenter (AI), the westernmost spur of Adria. In order to develop kinematic models, data on motion at the different margins of AI must be coordinated. Along the northern margin, the dextrally transpressive Insubric line (IL) was active between 25 and 16 Ma (Insubric-Helvetic phase of Alpine orogeny). Contemporaneously, along the southern margin (Paleo-Apenninic phase), a complementary sinistral motion took place along the Villalvernia-Varzi line (VVL). It emplaced the Monferrato Apennines westward to the north of the Ligurian Alps by carrying them westward on top of AI. Between 14 and 6 Ma (Jura-Lombardic phase of Alpine orogeny) the Lombardic thrust belt developed on the northern margin of AI, now largely hidden under the Po plain. Its continuation to the southwest is impeded by older thrust masses along the Western Alps that consist largely of basement, their sediments having been eroded, as noted on the deep reflection line CROP ALPI-1 by earlier investigators. This line, moreover, contains a deep reflection band originating in the autochthonous Mesozoic of the Apenninic foredeep. In order to better visualize this origin and the relation of further elements identified on reflection lines around the northwestern end of the Monferrato Apennines, a 3D fence diagram was constructed. It helps in establishing a 3D structural-kinematic model of the Alps-Apennines join based on the kinematics of AI. This model features an underthrust of AI under the western Alps in the Paleo-Apenninic phase. In the course of this underthrust, the Paleo-Apenninic elements of the Monferrato moved under the marginal thrusts of the western Alps. Subsequent Neo-Apenninic thrusting brought both elements together to the surface where they now form the Monferrato and Turin hills. A derivation of the Alpine Collina di Torino from the south instead of from the west, as recently proposed, meets with serious kinematic difficulties.  相似文献   

19.
In foreland thrust belts, abrupt lateral changes in tectonic style, structural–stratigraphic features, and topography usually occur across cross-strike faults. The Central Apennines of Italy offer an exceptional scenario of lateral variations in tectonic setting. Here, the Sangro Volturno oblique thrust ramp (SVOTR) represents the outer thrust front of the Pliocene–Quaternary foreland thrust system, confining southward the axial culmination of the orogen that occurs in the Central Apennines. We present an interpretation of the Pliocene–Quaternary evolution of this cross-strike fault through an integrated dataset including structural-geological mapping and subsurface onshore seismic reflection profiles. The interpretation of the structural framework is augmented by the analysis of low-temperature thermochronometers from 32 new sites extending across the subsurface transverse structure. As evidenced by seismic line interpretation, the localization and development of the SVOTR have been influenced by inherited extensional faults within a positive inversion tectonics context. The regional distribution of the maximum paleotemperature values across the SVOTR constrains the original extent of the allochthonous thrust sheet over all its hanging-wall and footwall blocks. The Pliocene–Quaternary thrusting and inversion of SVOTR caused the strong hanging-wall uplift, which brought to the complete erosion of the allochthonous units and the exhumation of the Adria units. The integrated analysis of low-temperature thermochronometers and structural evidence as applied in the study case can define the role of major cross-strike discontinuities in foreland thrust belts, by constraining and verifying their tectonics inversion significance and the amount of related exhumation.  相似文献   

20.
A low-angle extensional fault system affecting the non metamorphic rocks of the carbonate dominated Tuscan succession is exposed in the Lima valley (Northern Apennines, Italy). This fault system affects the right-side-up limb of a kilometric-scale recumbent isoclinal anticline and is, in turn, affected by superimposed folding and late-tectonic high-angle extensional faulting.The architecture of the low-angle fault system has been investigated through detailed structural mapping and damage zone characterization. Pressure-depth conditions and paleofluid evolution of the fault system have been studied through microstructural, mineralogical, petrographic, fluid inclusion and stable isotope analyses. Our results show that the low-angle fault system was active during exhumation of the Tuscan succession at about 180°C and 5 km depth, with the involvement of low-salinity fluids. Within this temperature - depth framework, the fault zone architecture shows important differences related to the different lithologies involved in the fault system and to the role played by the fluids during deformation. In places, footwall overpressuring influenced active deformation mechanisms and favored shear strain localization.Our observations indicate that extensional structures affected the central sector of the Northern Apennines thrust wedge during the orogenic contractional history, modifying the fluid circulation through the upper crust and influencing its mechanical behavior.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号