共查询到20条相似文献，搜索用时 62 毫秒
1.
This study was designed to develop a physically based hydrological model to describe the hydrological processes within forested mountainous river basins. The model describes the relationships between hydrological fluxes and catchment characteristics that are influenced by topography and land cover. Hydrological processes representative of temperate basins in steep terrain that are incorporated in the model include intercepted rainfall, evaporation, transpiration, infiltration into macropores, partitioning between preferential flow and soil matrix flow, percolation, capillary rise, surface flow (saturation‐excess and return flow), subsurface flow (preferential subsurface flow and baseflow) and spatial water‐table dynamics. The soil–vegetation–atmosphere transfer scheme used was the single‐layer Penman–Monteith model, although a two‐layer model was also provided. The catchment characteristics include topography (elevation, topographic indices), slope and contributing area, where a digital elevation model provided flow direction on the steepest gradient flow path. The hydrological fluxes and catchment characteristics are modelled based on the variable source‐area concept, which defines the dynamics of the watershed response. Flow generated on land for each sub‐basin is routed to the river channel by a kinematic wave model. In the river channel, the combined flows from sub‐basins are routed by the Muskingum–Cunge model to the river outlet; these comprise inputs to the river downstream. The model was applied to the Hikimi river basin in Japan. Spatial decadal values of the normalized difference vegetation index and leaf area index were used for the yearly simulations. Results were satisfactory, as indicated by model efficiency criteria, and analysis showed that the rainfall input is not representative of the orographic lifting induced rainfall in the mountainous Hikimi river basin. Also, a simple representation of the effects of preferential flow within the soil matrix flow has a slight significance for soil moisture status, but is insignificant for river flow estimations. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
2.
Many methods developed for calibration and validation of physically based distributed hydrological models are time consuming and computationally intensive. Only a small set of input parameters can be optimized, and the optimization often results in unrealistic values. In this study we adopted a multi‐variable and multi‐site approach to calibration and validation of the Soil Water Assessment Tool (SWAT) model for the Motueka catchment, making use of extensive field measurements. Not only were a number of hydrological processes (model components) in a catchment evaluated, but also a number of subcatchments were used in the calibration. The internal variables used were PET, annual water yield, daily streamflow, baseflow, and soil moisture. The study was conducted using an 11‐year historical flow record (1990–2000); 1990–94 was used for calibration and 1995–2000 for validation. SWAT generally predicted well the PET, water yield and daily streamflow. The predicted daily streamflow matched the observed values, with a Nash–Sutcliffe coefficient of 0·78 during calibration and 0·72 during validation. However, values for subcatchments ranged from 0·31 to 0·67 during calibration, and 0·36 to 0·52 during validation. The predicted soil moisture remained wet compared with the measurement. About 50% of the extra soil water storage predicted by the model can be ascribed to overprediction of precipitation; the remaining 50% discrepancy was likely to be a result of poor representation of soil properties. Hydrological compensations in the modelling results are derived from water balances in the various pathways and storage (evaporation, streamflow, surface runoff, soil moisture and groundwater) and the contributions to streamflow from different geographic areas (hill slopes, variable source areas, sub‐basins, and subcatchments). The use of an integrated multi‐variable and multi‐site method improved the model calibration and validation and highlighted the areas and hydrological processes requiring greater calibration effort. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
3.
Soils affect the distribution of hydrological processes by partitioning precipitation into different components of the water balance. Therefore, understanding soil-water dynamics at a catchment scale remains imperative to future water resource management. In this study, the value of hydropedological insights was examined to calibrate a processes-based model. Soil morphology was used as soft data to assist in the calibration of the Soil Water Assessment Tool (SWAT+) model at five different catchment scales (48, 56, 174, 674, and 2421 km2) in the Sabie River catchment, South Africa. The aim of this study was to calibrate the SWAT+ model to accurately simulate long-term monthly streamflow predictions as well as to reflect internal soil hydrological processes using a procedure focusing on hydropedology as a calibration tool in a multigauge system. Results indicated that calibration improved streamflow predictions where R2 improved by 2%–8%. Nash-Sutcliffe Efficiency (NSE) improved from negative correlations to values exceeding 0.5 at four of the five catchment scales compared to the uncalibrated model. Results confirm that soil mapping units can be calibrated individually within SWAT+ to improve the representation of hydrological processes. Particularly, the spatial linkage between hydropedology and hydrological processes, which is captured within the soil map of the catchment, can be adequately reflected within the model simulations after calibration. This research will lead to an improved understanding of hydropedology as soft data to improve hydrological modelling accuracy. 相似文献
4.
An efficient calibration with remotely sensed (RS) data is important for accurate predictions at ungauged catchments. This study investigates the advantages of streamflow-sensitive regionalization on calibration with RS evapotranspiration (ET). Regionalization experiments are performed at 28 catchments in Australia. The catchments are classified into three groups based on annual rainfall and runoff coefficients. Streamflow, RS ET, and a multi-objective RS ET-streamflow calibration are performed using the DiffeRential Evolution Adaptive Metropolis algorithm in each catchment. Simplified Australian Water Resource Assessment-Landscape model is calibrated for a selection of five parameters. Posterior probability distributions of parameters from three calibrations performed at donor catchments in each group are inspected to find the parameter for regionalization in the individual group. In group 1 of wetter catchments, regionalization of parameter FsoilEmax (soil evaporation scaling factor) helps to simplify the calibration without any deterioration in ET, soil moisture (SM) and streamflow predictions. Regionalization of parameter Beta (coefficient describing rate of hydraulic conductivity increase with water content) in group 2 assists to improve the streamflow predictions with no decrement in ET and SM predictions. However, regionalization is not able to provide satisfactory results in group 3. Group 3 includes low-yielding catchments, with average annual rainfall below 1000 mm/year and runoff coefficient less than 0.1, where traditional streamflow calibration also fails to produce accurate results. This study concludes that streamflow-sensitive regionalization is effective for improving the efficacy of RS ET calibration in wetter catchments. 相似文献
5.
6.
Rainfall runoff (RR) models are fundamental tools for reducing flood hazards. Although several studies have highlighted the potential of soil moisture (SM) observations to improve flood modelling, much research has still to be done for fully exploiting the evident connection between SM and runoff. As a way of example, improving the quality of forcing data, i.e. rainfall observations, may have a great benefit in flood simulation. Such data are the main hydrological forcing of classical RR models but may suffer from poor quality and record interruption issues. This study explores the potential of using SM observations to improve rainfall observations and set a reliable initial wetness condition of the catchment for improving the capability in flood modelling. In particular, a RR model, which incorporates SM for its initialization, and an algorithm for rainfall estimation from SM observations are coupled using a simple integration method. The study carried out at the Valescure experimental catchment (France) demonstrates the high information content retained by SM for RR transformation, thus giving new possibilities for improving hydrological applications. Results show that an appropriate configuration of the two models allows obtaining improvement in flood simulation up to 15% in mean and 34% in median Nash Sutcliffe performances as well as a reduction of the median error in volume and on peak discharge of about 30% and 15%, respectively. 相似文献
7.
Australian arid zone ephemeral rivers are typically unregulated and maintain a high level of biodiversity and ecological health. Understanding the ecosystem functions of these rivers requires an understanding of their hydrology. These rivers are typified by highly variable hydrological regimes and a paucity, often a complete absence, of hydrological data to describe these flow regimes. A daily time‐step, grid‐based, conceptual rainfall–runoff model was developed for the previously uninstrumented Neales River in the arid zone of northern South Australia. Hourly, logged stage data provided a record of stream‐flow events in the river system. In conjunction with opportunistic gaugings of stream‐flow events, these data were used in the calibration of the model. The poorly constrained spatial variability of rainfall distribution and catchment characteristics (e.g. storage depths) limited the accuracy of the model in replicating the absolute magnitudes and volumes of stream‐flow events. In particular, small but ecologically important flow events were poorly modelled. Model performance was improved by the application of catchment‐wide processes replicating quick runoff from high intensity rainfall and improving the area inundated versus discharge relationship in the channel sections of the model. Representing areas of high and low soil moisture storage depths in the hillslope areas of the catchment also improved the model performance. The need for some explicit representation of the spatial variability of catchment characteristics (e.g. channel/floodplain, low storage hillslope and high storage hillslope) to effectively model the range of stream‐flow events makes the development of relatively complex rainfall–runoff models necessary for multisite ecological studies in large, ungauged arid zone catchments. Grid‐based conceptual models provide a good balance between providing the capacity to easily define land types with differing rainfall–runoff responses, flexibility in defining data output points and a parsimonious water‐balance–routing model. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
8.
Abstract Grid-based distributed models have become popular for describing spatial hydrological processes. However, the influence of non-homogeneity within a grid on streamflow simulation was not adequately addressed in the literature. In this study, we investigated how the statistical characteristics of soil moisture storage within a grid impacts on streamflow simulations. The spatial variation of the topographic index, TI, within a grid was used to determine parameter B of the statistical curve of soil moisture storage in the Xinanjiang model. For comparison of influences of the non-homogeneity within a grid on streamflow simulation, two parameterization schemes of soil moisture storage capacity were developed: a grid-parameterization scheme for a distributed model and a catchment-averaged scheme for a semi-distributed model. The practicability and usefulness of the grid-parameterization method were evaluated through model comparisons. The two models were applied in Jiangwan experimental catchment Zhejiang Province, China. Streamflow discharge data at the catchment outlet from 1971 to 1986 at different temporal resolutions, e.g. 15 min and daily time step, were used for model calibration and validation. Statistical results for different grid scales demonstrated that the mean and variation of TI and B decline significantly as the grid scale increases. The simulated streamflow discharges of the two models were similar and the semi-distributed model outperformed the distributed model slightly when the streamflow at the outlet of the catchment was used as the only basis for comparison. In addition, a relatively larger bias in the predicted discharges between these two models was observed along with an abrupt increase of soil moisture saturation ratio. A further analysis of the simulated soil moisture content distribution revealed that the distributed model can provide a reasonable representation of the variable source area concept, which was justified to some extent by the field experiment data. Editor D. Koutsoyiannis Citation Liu, J.T., Chen, X., Wu, J.C., Zhang, X.N., Feng, D.Z. and Xu, C.-Y., 2012. Grid parameterization of a conceptual, distributed hydrological model through integration of a sub-grid topographic index: necessity and practicability. Hydrological Sciences Journal, 57 (2), 282–297. 相似文献
9.
Maria Staudinger Michael Stoelzle Stefan Seeger Jan Seibert Markus Weiler Kerstin Stahl 《水文研究》2017,31(11):2000-2015
One of the most important functions of catchments is the storage of water. Catchment storage buffers meteorological extremes and interannual streamflow variability, controls the partitioning between evaporation and runoff, and influences transit times of water. Hydrogeological data to estimate storage are usually scarce and seldom available for a larger set of catchments. This study focused on storage in prealpine and alpine catchments, using a set of 21 Swiss catchments comprising different elevation ranges. Catchment storage comparisons depend on storage definitions. This study defines different types of storage including definitions of dynamic and mobile catchment storage. We then estimated dynamic storage using four methods, water balance analysis, streamflow recession analysis, calibration of a bucket‐type hydrological model Hydrologiska Byråns Vattenbalansavdelning model (HBV), and calibration of a transfer function hydrograph separation model using stable isotope observations. The HBV model allowed quantifying the contributions of snow, soil and groundwater storages compared to the dynamic catchment storage. With the transfer function hydrograph separation model both dynamic and mobile storage was estimated. Dynamic storage of one catchment estimated by the four methods differed up to one order of magnitude. Nevertheless, the storage estimates ranked similarly among the 21 catchments. The largest dynamic and mobile storage estimates were found in high‐elevation catchments. Besides snow, groundwater contributed considerably to this larger storage. Generally, we found that with increasing elevation the relative contribution to the dynamic catchment storage increased for snow, decreased for soil, but remained similar for groundwater storage. 相似文献
10.
N. H. W. Donker 《水文研究》2001,15(1):135-149
A hydrological model (YWB, yearly water balance) has been developed to model the daily rainfall–runoff relationship of the 202 km2 Teba river catchment, located in semi‐arid south‐eastern Spain. The period of available data (1976–1993) includes some very rainy years with intensive storms (responsible for flooding parts of the town of Malaga) and also some very dry years. The YWB model is in essence a simple tank model in which the catchment is subdivided into a limited number of meaningful hydrological units. Instead of generating per unit surface runoff resulting from infiltration excess, runoff has been made the result of storage excess. Actual evapotranspiration is obtained by means of curves, included in the software, representing the relationship between the ratio of actual to potential evapotranspiration as a function of soil moisture content for three soil texture classes. The total runoff generated is split between base flow and surface runoff according to a given baseflow index. The two components are routed separately and subsequently joined. A large number of sequential years can be processed, and the results of each year are summarized by a water balance table and a daily based rainfall runoff time series. An attempt has been made to restrict the amount of input data to the minimum. Interactive manual calibration is advocated in order to allow better incorporation of field evidence and the experience of the model user. Field observations allowed for an approximate calibration at the hydrological unit level. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
11.
ABSTRACTIn order to improve the soil moisture (SM) modelling capacity, a regional SM assimilation scheme based on an empirical approach considering spatial variability was constructed to assimilate in situ observed SM data into a hydrological model. The daily variable infiltration capacity (VIC) model was built to simulate SM in the Upper Huai River Basin, China, with a resolution of 5 km × 5 km. Through synthetic assimilation experiments and validations, the assimilated SM was evaluated, and the assimilation feedback on evapotranspiration (ET) and streamflow are analysed and discussed. The results show that the assimilation scheme improved the SM modelling capacity, both spatially and temporally. Moreover, the simulated ET was continually affected by changes in SM simulation, and the streamflow predictions were improved after applying the SM assimilation scheme. This study demonstrates the potential value of in situ observations in SM assimilation, and provides valuable ways for improving hydrological simulations. 相似文献
12.
Data collected in 4 years of field observations were used in conjunction with continuous simulation models to study, at the small‐basin scale, the water balance of a closed catchment‐lake system in a semi‐arid Mediterranean environment. The open water evaporation was computed with the Penman equation, using the data set collected in the middle of the lake. The surface runoff was partly measured at the main tributary and partly simulated using a distributed, catchment, hydrological model, calibrated with the observed discharge. The simplified structure of the developed modelling mainly concerns soil moisture dynamics and bedrock hydraulics, whereas the flow components are physically based. The calibration produced high efficiency coefficients and showed that surface runoff is greatly affected by soil water percolation into fractured bedrock. The bedrock reduces the storm‐flow peaks and the interflow and has important multi‐year effects on the annual runoff coefficients. The net subsurface outflow from the lake was calculated as the residual of the lake water balance. It was almost constant in the dry seasons and increased in the wet seasons, because of the moistening of the unsaturated soil. During the years of observation, rainfall 30% higher than average caused abundant runoff and a continuous rise in the lake water levels. The analysis allows to predict that, in years with lower than the average rainfall, runoff will be drastically reduced and will not be able to compensate for negative balance between precipitation and lake evaporation. Such highly unsteady situations, with great fluctuations in lake levels, are typical of closed catchment‐lake systems in the semi‐arid Mediterranean environment. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
13.
Hilary K. McMillan Martyn P. Clark William B. Bowden Maurice Duncan Ross A. Woods 《水文研究》2011,25(4):511-522
Hydrological scientists develop perceptual models of the catchments they study, using field measurements and observations to build an understanding of the dominant processes controlling the hydrological response. However, conceptual and numerical models used to simulate catchment behaviour often fail to take advantage of this knowledge. It is common instead to use a pre‐defined model structure which can only be fitted to the catchment via parameter calibration. In this article, we suggest an alternative approach where different sources of field data are used to build a synthesis of dominant hydrological processes and hence provide recommendations for representing those processes in a time‐stepping simulation model. Using analysis of precipitation, flow and soil moisture data, recommendations are made for a comprehensive set of modelling decisions, including Evapotranspiration (ET) parameterization, vertical drainage threshold and behaviour, depth and water holding capacity of the active soil zone, unsaturated and saturated zone model architecture and deep groundwater flow behaviour. The second article in this two‐part series implements those recommendations and tests the capability of different model sub‐components to represent the observed hydrological processes. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
14.
Understanding hydrological processes at catchment scale through the use of hydrological model parameters is essential for enhancing water resource management. Given the difficulty of using lump parameters to calibrate distributed catchment hydrological models in spatially heterogeneous catchments, a multiple calibration technique was adopted to enhance model calibration in this study. Different calibration techniques were used to calibrate the Soil and Water Assessment Tool (SWAT) model at different locations along the Logone river channel. These were: single-site calibration (SSC); sequential calibration (SC); and simultaneous multi-site calibration (SMSC). Results indicate that it is possible to reveal differences in hydrological behavior between the upstream and downstream parts of the catchment using different parameter values. Using all calibration techniques, model performance indicators were mostly above the minimum threshold of 0.60 and 0.65 for Nash Sutcliff Efficiency (NSE) and coefficient of determination (R 2) respectively, at both daily and monthly time-steps. Model uncertainty analysis showed that more than 60% of observed streamflow values were bracketed within the 95% prediction uncertainty (95PPU) band after calibration and validation. Furthermore, results indicated that the SC technique out-performed the other two methods (SSC and SMSC). It was also observed that although the SMSC technique uses streamflow data from all gauging stations during calibration and validation, thereby taking into account the catchment spatial variability, the choice of each calibration method will depend on the application and spatial scale of implementation of the modelling results in the catchment. 相似文献
15.
Digital elevation models (DEMs) at different resolutions (180, 360, and 720 m) are used to examine the impact of different levels of landscape representation on the hydrological response of a 690‐km2 catchment in southern Quebec. Frequency distributions of local slope, plan curvature, and drainage area are calculated for each grid size resolution. This landscape analysis reveals that DEM grid size significantly affects computed topographic attributes, which in turn explains some of the differences in the hydrological simulations. The simulations that are then carried out, using a coupled, process‐based model of surface and subsurface flow, examine the effects of grid size on both the integrated response of the catchment (discharge at the main outlet and at two internal points) and the distributed response (water table depth, surface saturation, and soil water storage). The results indicate that discharge volumes increase as the DEM is coarsened, and that coarser DEMs are also wetter overall in terms of water table depth and soil water storage. The reasons for these trends include an increase in the total drainage area of the catchment for larger DEM cell sizes, due to aggregation effects at the boundary cells of the catchment, and to a decrease in local slope and plan curvature variations, which in turn limits the capacity of the watershed to transmit water downslope and laterally. The results obtained also show that grid resolution effects are less pronounced during dry periods when soil moisture dynamics are mostly controlled by vertical fluxes of evaporation and percolation. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
16.
AbstractThe impact of climate and land-use changes on hydrological processes and sediment yield is investigated in the Be River catchment, Vietnam, using the Soil and Water Assessment Tool (SWAT) hydrological model. The sensitivity analysis, model calibration and validation indicated that the SWAT model could reasonably simulate the hydrology and sediment yield in the catchment. From this, the responses of the hydrology and sediment to climate change and land-use changes were considered. The results indicate that deforestation had increased the annual flow (by 1.2%) and sediment load (by 11.3%), and that climate change had also significantly increased the annual streamflow (by 26.3%) and sediment load (by 31.7%). Under the impact of coupled climate and land-use changes, the annual streamflow and sediment load increased by 28.0% and 46.4%, respectively. In general, during the 1978–2000 period, climate change influenced the hydrological processes in the Be River catchment more strongly than the land-use change.
Editor Z.W. Kundzewicz; Associate editor Q. ZhangCitation Khoi, D.N. and Suetsugi, T., 2014. Impact of climate and land-use changes on hydrological processes and sediment yield—a case study of the Be River catchment, Vietnam. Hydrological Sciences Journal, 59 (5), 1095–1108. 相似文献
17.
18.
Tesfay G. Gebremicael Yasir A. Mohamed Pieter van der Zaag Khalid Hassaballah Eyasu Y. Hagos 《水文研究》2020,34(9):2101-2116
Understanding the natural low flow of a catchment is critical for effective water management policy in semi-arid and arid lands. The Geba catchment in Ethiopia, forming the headwaters of Tekeze-Atbara basin was known for its severe land degradation before the recent large scale Soil and Water conservation (SWC) programs. Such interventions can modify the hydrological processes by changing the partitioning of the incoming rainfall on the land surface. However, the literature lacks studies to quantify the hydrological impacts of these interventions in the semi-arid catchments of the Nile basin. Statistical test and Indicators of Hydrological Alteration (IHA) were used to identify the trends of streamflow in two comparatives adjacent (one treated with intensive SWC intervention and control with fewer interventions) catchments. A distributed hydrological model was developed to understand the differences in hydrological processes of the two catchments. The statistical and IHA tools showed that the low flow in the treated catchment has significantly increased while considerably decreased in the control catchment. Comparative analysis confirmed that the low flow in the catchment with intensive SWC works was greater than that of the control by >30% while the direct runoff was lower by >120%. This implies a large proportion of the rainfall in the treated catchment is infiltrated and recharge aquifers which subsequently contribute to streamflow during the dry season. The proportion of soil storage was more than double compared to the control catchment. Moreover, hydrological response comparison from pre- and post-intervention showed that a drastic reduction in direct runoff (>84%) has improved the low flow by >55%. This strongly suggests that the ongoing intensive SWC works have significantly improved the low flows while it contributed to the reduction of total streamflow in the catchment. 相似文献
19.
Regional frequency analysis is an important tool in estimating design flood for ungauged catchments. Index flood is an important component in regionalized flood formulas. In the past, many formulas have been developed based on various numbers of calibration catchments (e.g. from less than 20 to several hundred). However, there is a lack of systematic research on the model uncertainties caused by the number of calibration catchments (i.e. what is the minimum number of calibration catchment? and how should we choose the calibration catchments?). This study uses the statistical resampling technique to explore the impact of calibration catchment numbers on the index flood estimation. The study is based on 182 catchments in England and an index flood formula has been developed using the input variable selection technique in the data mining field. The formula has been used to explore the model uncertainty due to a range of calibration catchment numbers (from 15 to 130). It is found that (1) as expected, the more catchments are used in the calibration, the more reliable of the models developed are (i.e. with a narrower band of uncertainty); (2) however, poor models are still possible with a large number of calibration catchments (e.g. 130). In contrast, good models with a small number of calibration catchments are also achievable (with as low as 15 calibration catchments). This indicates that the number of calibration catchments is only one of the factors influencing the model performance. The hydrological community should explore why a smaller calibration data set could produce a better model than a large calibration data set. It is clear from this study that the information content in the calibration data set is equally if not more important than the number of calibration data. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
20.
Testing a spatially distributed tracer‐aided runoff model in a snow‐influenced catchment: Effects of multicriteria calibration on streamwater ages 
下载免费PDF全文
下载免费PDF全文 Thea I. Piovano Doerthe Tetzlaff Pertti Ala‐aho Jim Buttle Carl P. J. Mitchell Chris Soulsby 《水文研究》2018,32(20):3089-3107
Integrating stable isotope tracers into rainfall‐runoff models allows investigation of water partitioning and direct estimation of travel times and water ages. Tracer data have valuable information content that can be used to constrain models and, in integration with hydrometric observations, test the conceptualization of catchment processes in model structure and parameterization. There is great potential in using tracer‐aided modelling in snow‐influenced catchments to improve understanding of these catchments' dynamics and sensitivity to environmental change. We used the spatially distributed tracer‐aided rainfall‐runoff (STARR) model to simulate the interactions between water storage, flux, and isotope dynamics in a snow‐influenced, long‐term monitored catchment in Ontario, Canada. Multiple realizations of the model were achieved using a combination of single and multiple objectives as calibration targets. Although good simulations of hydrometric targets such as discharge and snow water equivalent could be achieved by local calibration alone, adequate capture of the stream isotope dynamics was predicated on the inclusion of isotope data in the calibration. Parameter sensitivity was highest, and most local, for single calibration targets. With multiple calibration targets, key sensitive parameters were still identifiable in snow and runoff generation routines. Water ages derived from flux tracking subroutines in the model indicated a catchment where runoff is dominated by younger waters, particularly during spring snowmelt. However, resulting water ages were most sensitive to the partitioning of runoff sources from soil and groundwater sources, which was most realistically achieved when isotopes were included in the calibration. Given the paucity of studies where hydrological models explicitly incorporate tracers in snow‐influenced regions, this study using STARR is an important contribution to satisfactorily simulating snowpack dynamics and runoff generation processes, while simultaneously capturing stable isotope variability in snow‐influenced catchments. 相似文献