共查询到19条相似文献，搜索用时 453 毫秒
1.
应变软化在甘肃红柳河辉长质糜棱岩形成中的作用 总被引：4，自引：0，他引：4
本文论述的辉长质糜棱岩发现于甘肃北山红柳河蛇绿岩套中。在简单说明了糜棱岩的地质背景及特征、描述了变形岩石的显微构造特征之后，重点对糜棱岩形成过程中的应变软化机制作了论述。探讨了软化岩的存在、组构调整、粒度缩小，长石的动态重结晶，水以及主导变形机制的不断调整与转化等应变软化机制，在应力作用下使岩石逐步软化过程中所起的作用，得出这种糜棱岩是在拆离剪切作用下，应力在蛇绿岩中的软化岩石辉长岩中集中，从而形 相似文献
2.
地壳不同构造层次岩石变形机制及其构造岩类型 总被引：1，自引：0，他引：1
构造岩记录地壳构造变形演化重要信息,其成因、分类与命名一直没有统一认识。本文对构造岩变形机制、控制因素和构造岩分类进行系统总结。认为构造岩形成受物质成分、变形机制、应变速率、流体、温度、压力等因素控制,是物质成分与物理化学条件、变形机制等众多变量的函数。变形机制包括破裂作用、碎裂流动、晶质塑性、物质扩散、重结晶作用和超塑性流动,不同变形机制出现在不同地壳构造层次中,形成不同的显微组构。依据成因机制、物质组成和组构等标志对构造岩分类与命名进行重新修订,将构造岩划分为碎裂岩系列和变质构造岩系列,前者发育在地壳浅构造层次上,以破裂作用和碎裂流动变形机制为主;后者发育在中深部构造层次上,以晶质塑性、重结晶作用、物质扩散作用和超塑性流动作用为主。碎裂岩系列划分碎裂岩、角砾岩、微角砾岩、超碎裂岩、断层泥和假玄武玻璃;变质构造岩系列划分为构造片岩、糜棱岩和构造片麻岩。依据岩石流变性质、变形机制和构造岩分布,地壳构造层次划分为:脆性域,变形机制以碎裂作用和碎裂流动为主,发育碎裂岩系列;脆-韧性转换域,以晶质塑性、物质扩散和重结晶作用为主,并伴随有碎裂作用,形成糜棱岩、千糜岩和构造片岩;低温韧性域,以晶质塑性、物质扩散和重结晶作为主,发育糜棱岩与构造片岩;高温韧性域,以超塑性蠕变和重结晶作用为主,形成构造片麻岩。 相似文献
3.
胶南造山带经历了长期韧性变形作用的改造,形成以糜棱岩和变晶糜棱岩为代表的构造岩。两类构造岩形成的温压条件不同,岩石化学成分的变异特点及变异机制也存在显著的差异。通过对比构造岩变形前后岩石化学成分的变异特征,糜棱岩类构造岩的成分变异主要由体积的亏损引起（亏损率达５０％～６０％）;变晶糜棱岩类构造岩的成分变异除由较大的体积亏损（亏损率达５７．１％～７０％）之外,尚存在大量的渗流流体作用。 相似文献
4.
通过构造岩鉴别岩石动态重结晶的机制 总被引：4，自引：0，他引：4
岩石如书,包含着丰富的地球演化信息。通过破解这本天书,地质学家得以了解发生在地球内部的地质过程。构造岩中的显微构造是“写在岩石中的变形过程”。通过显微构造观察,可以了解岩石矿物的变形机理。以天山造山带内发育的糜棱岩为具体实例,介绍了中、下地壳层次变形岩石动态重结晶的机理及形成的相关显微构造的特点。由于构造岩均是经历过重结晶作用的产物,显微观察只能揭示变形矿物重结晶的机制。在中、下地壳层次,矿物动态重结晶的主要机理分为3种（从低温到高温）：膨胀鼓出(BLG,又称膨凸)、亚晶粒旋转(SGR)和高温颗粒边界迁移(GBM)。这3种方式形成各具特色的显微构造：BLG形成近等粒交叉舌状构造;SGR产生定向排列的拉长新颗粒条带;而GBM造成典型的具不规则状颗粒边界、大小悬殊的新颗粒组合、颗粒内部波状消光不明显的显微构造。除了温度条件外,应变速率对动态重结晶机制也有明显的影响。在显微构造观察过程中,详细、全面应该是最重要的原则。 相似文献
5.
构造层次是指在一定温度、压力条件下,由一定方式的构造力作用在岩石或岩石组合中形成一套特定的构造形迹群,不同类型、样式及组成的构造形迹群代表了不同温度、压力条件下构造变形产物。与此相应又有深部,中部及浅部层次的划分,以及居于其间的多个过渡类型。不同层次构造变形的代表性物质组成是变晶糜棱岩带（构造片麻岩带）、糜棱岩带,构造片岩和破裂岩等。据此提出深层次构造变形与变晶糜棱岩型金矿有关、中、深层次构造变莆 相似文献
6.
概述了岩石超塑性变形机制、显微构造特征、影响因素及其动力学意义。岩石超塑性是一种重要的岩石变形现象，是岩石在高温条件下发生极大应变量（＞1000％）的拉伸变形而不出现断裂的现象。岩石超塑性广泛分布于从上地壳到下地幔的各类岩石之中。根据变形产生因素的不同，岩石超塑性可分为结构超塑性和相变超塑性。岩石超塑性不是一种简单的变形机制，它与扩散蠕变和位错蠕变密切相关，是受扩散调节的晶粒边界滑移和位错蠕变共同竞争的结果。岩石超塑性的研究对解释糜棱岩的形成机制、下地壳莫霍面深地震反射体的成因、上地幔流变弱化以及深源地震的产生和突然消失具有重要的动力学意义。 相似文献
7.
糜棱岩是一种在固态下发生流动和动态重结晶的强烈变形岩石，是韧性变形的产物，其分类应以糜棱岩化基质与碎斑的比例为主要标志。当前，国内外在对糜棱岩的显微构造及宏观特征、变形机制、变形环境、空间展布的研究方面，取得了较大进展，同时也提出了有待深入探讨的新课题。 相似文献
8.
作用于岩石中的变形机制包括了扩散物质迁移、晶质塑性和颗粒边界滑移作用,而且也包括了破裂和碎裂作用。每种变形机制都形成了一系列特征性的变形显微构造,它们对确定构造事件的条件、动力学和运动学有帮助。旋回性变形事件对显微构造保存和发展尤其重要。本文提出了未来需要集中研究的四个领域:第一是破裂机制的鉴别,第二是详细评价旋回性变形事件的特征和作用或者在变形机制轨迹上流动的不稳定性,第三需要使特征显微构造的稳定性定量化和第四需要把PTt轨迹分析与变形机制轨迹分析结合起来。 相似文献
9.
变质构造岩类型及其特征 总被引：8，自引：0，他引：8
变质构造岩是由变质变形作用形成的一种特殊类型岩石,形成于地壳不同构造层次上的韧性变形带中,具有明确的构造成因的含义。依据变形机制、组构、同构造新生矿物组合,以及形成环境,将韧性剪切带中变质构造岩分为构造片麻岩系列、构造片岩系列和糜棱岩系列。构造片麻岩系列形成于地壳深部构造层次上,以颗粒流动和扩散蠕变变形机制为主,宏观上表现为条纹和条带状构造,微观上为三边平衡结构。构造片岩系列形成于地壳中浅部构造层次上,以位错蠕变和新矿物化作用为主,由同构造新生片状矿物和基质组成。糜棱岩系列主要以位错蠕变变形机制为主,动力重结晶现象普遍,由残斑和基质两个部分组成,粒度变细,S-L组构发育,形成于地壳中-中浅部层次。 相似文献
10.
内蒙古色尔腾山地区花岗绿岩带糜棱岩变形变质过程探讨 总被引：2，自引：0，他引：2
采用不同研究方法分析和解读岩石和矿物的显微构造特征，能再造结晶基底岩石复杂的变形和变质演化过程和条件。通过对色尔腾山地区花岗绿岩带中韧性剪切带的糜棱岩显微构造、石英组构、矿物化学等综合分析，发现该区糜棱岩在经历了低角闪岩相区域变质及绿帘角闪岩相退变质变形之后，发生了不均匀进变质重结晶作用及中低绿片岩相退变质变形等几个演化阶段。由不同阶段温压条件所限定的p-T演化轨迹为一个在早期顺时针的基础上叠加了一个晚期逆时针环的复杂图像。 相似文献
11.
深部地壳镁铁质岩石(斜长角闪岩)叶理的组成及形成机制分析--以辽东海城地区变质镁铁质岩石为例 总被引：4，自引：0，他引：4
高级变质镁铁质岩石叶理形成于地壳深部环境，对其组成及形成机制的深入研究有助于讨论在深部地壳(下地壳)环境中岩石的表现与流动过程。以辽宁海城马风地区广泛出露的斜长角闪岩为例，对变质镁铁质岩石中几种不同类型叶理的组成及形成机制进行初步探讨。显微构造分析结果表明，变质斜长角闪岩中主要发育三种具有不同特点的叶理构造型式：条带状、糜棱状和片麻状。作为岩石叶理的主要组成矿物。角闪石对叶理的形成贡献最大。斜长石在不同类型岩石中对叶理的形成作用不同。组成叶理的斜长石和角闪石矿物对的温压测算结果表明，它们形成于426～532MPa和58l℃～639℃之间。变质基性岩中叶理的形成是这种温度和压力条件下多种机制(包括晶体的定向重结晶作用、应力作用下的变质分异、晶质塑性变形、亚颗粒旋转动态重结晶)共同作用的结果。 相似文献
12.
The Darreh Sary metapelitic rocks are located in the northeast of Zagros orogenic belt and Sanandaj-Sirjan structural zone. The lithological composition of these rocks includes slate, phyllite, muscovitebiotite schist, garnet schist, staurolite-garnet schist and staurolite schist. The shale is the protolith of these metamorphic rocks, which was originated from the continental island arc tectonic setting and has been subjected to processes of Zagros orogeny. The deformation mechanisms in these rocks include bulging recrystallization (BLG), subgrain rotation recrystallization (SGR) and grain boundary migration recrystallization (GBM), which are considered as the key to estimate the deformation temperature of the rocks. The estimated ranges of deformation temperature and depth in these rocks show the temperatures of 275–375, 375–500, and >500°C and the depths of 10 to 17 km. The observed structures in these rocks such as faults, fractures and folds, often with the NW-SE direction coordinate with the structural trends of Zagros orogenic belt structures. The S-C mylonite fabrics is observed in these rocks with other microstructures such as mica fish, σ fabric and garnet deformation indicate the dextral shear deformation movements of study area. Based on the obtained results of this research, the stages of tectonic evolution of Darreh Sary area were developed. 相似文献
13.
14.
The Kalininsky ultramafic massif is a fragment of lower structural zone of the Kurtushiba ophiolitic belt in the extreme northeastern part of the Western Sayan. The massif is composed largely of rocks making up the dunite-garzburgite banded complex. The northeastern part of the massif is composed mainly of dunite with linear NW-trending chromite-bearing zones, the localization of which is controlled by banding of the dunite-harzburgite complex. Harzburgite and dunite are characterized by inhomogeneous structures and textures caused by nonuniform ductile deformation, which is expressed as heterogeneous extinction, kink bands, and syntectonic and annealing recrystallization. The petrostructural patterns of olivine in harzburgite and dunite provide evidence for three stages of ductile deformation. At the first stage under deep mantle-crustal conditions, the ductile flow of ultramafic rocks developed mainly in a regime of axial compression, high temperature (>1000°C), and low strain rate (? < 10?6 s?1), which resulted in translational gliding along the (010)[100] and (100)[001] systems in olivine and enstatite, respectively, in combination with a subordinate role of syntectonic recrystallization. Consequently, the rocks acquired a medium-grained (mesogranular) microstructure. At the second stage, related to the thermal effect on ultramafics, the ductile flow developed under the settings of low strain rate (? < 10?6 s?1) and rising temperature (>1000°C). The translational gliding in olivine proceeded largely along (010)[100] and was accompanied by diffusion creep. As the temperature rose, ductile deformation gave way to secondary recrystallization of annealing, which facilitated the growth of olivine grains free of dislocations owing to absorption of individual grains oriented adversely relative to the compression axis and deformed grains saturated with dislocations. As a result, dunite and harzburgite with a coarse-grained porphyroblastic microstructure have been formed. The third stage of ductile flow was apparently related to their transport along deep-seated thrust faults under settings of intense shear deformations at a high temperature (～1000°C) and strain rate (? >10?4 s?1). The ductile flow in olivine resulted in heterogeneous translational gliding along (010)[100] and accompanied by intense syntectonic recrystallization with the formation of a porphyroblastic microstructure. Chromite mineralization in dunite is controlled by internal banding. Intense ductile flow facilitated the metamorphic separation of linearbanded Cr-spinel segregations. Thus, the results of a petrostructural study show that ultramafic rocks of the Kalninsky massif, ascending to the upper lithosphere, underwent both axial and shear ductile deformations in the mantle and lower crust, and these deformations controlled chromite mineralization. 相似文献
15.
N. S. Angus 《Lithos》1971,4(4):381-387
The contention that ocellar quartz-gabbros and other similar rocks are the result of isochemical recrystallization of hydrothermally altered volcanic rocks, rather than the hybridization of basic rocks in contact with acid magma, is critically discussed. 相似文献
16.
17.
构造动力变质作用初论 总被引：3，自引：1，他引：2
本文提出了构造动力变质作用的基本概念。即在构造动力及其引发的动力热流共同作用下,岩石、矿物在构造运动中发生的形变、相变而呈现的变质作用。按构造动力变质作用的物理化学条件,动力变质岩的结构构造、动态重结晶和混合岩化作用、应力矿物共生组合关系及其空间分布等特征,将构造动力变质作用由弱到强划分为4个发展阶段和相应的4种基本变质类型——脆性、脆-塑性、塑性和动力热流变形变质,并论述了它们各自的基本特征。 相似文献
18.
S-C Mylonites 总被引：2，自引：0，他引：2
Two types of foliations are commonly developed in mylonites and mylonitic rocks: (a) S-surfaces related to the accumulation of finite strain and (b) C-surfaces related to displacement discontinuities or zones of relatively high shear strain. There are two types of S-C mylonites. Type I S-C mylonites, described by Berthé et al., typically occur in deformed granitoids. They involve narrow zones of intense shear strain which cut across (mylonitic) foliation.Type II S-C mylonites (described here) have widespread occurrence in quartz-mica rocks involved in zones of intense non-coaxial laminar flow. The C-surfaces are defined by trails of mica ‘fish’ formed as the result of microscopic displacement discontinuities or zones of very high shear strain. The S-surfaces are defined by oblique foliations in the adjacent quartz aggregates, formed as the result of dynamic recrystallization which periodically resets the ‘finite-strain clock’. These oblique foliations are characterized by grain elongations, alignments of segments of the grain boundary enveloping surfaces, and by trails of grains with similar c-axis orientations.Examples of this aspect of foliation development in mylonitic rocks are so widespread that we suggest the creation of a broad class of S-C tectonites, and a deviation from the general tradition of purely geometric analysis of foliation and time relationships. Kinematic indicators such as those discussed here allow the recognition of kilometre-scale zones of intense non-coaxial laminar flow in crustal rocks, and unambiguous determination of the sense of shear. 相似文献
19.
华南地洼阶段古岩溶沉积建造 总被引：1，自引：0，他引：1
华南碳酸盐岩地区,广泛分布大小不等、形态务异,以钙屑砾岩和角砾岩等组成的地质体。这中生代岩溶凹陷和洞穴中的洞穴堆积物--占岩溶沉积岩。有两个岩溶作用期:地洼初动期期,洞穴堆积物的时代,分别相当于白垩纪-早第三纪,晚三叠世-中侏罗世。地洼初动期岩溶沉积体,有广泛的矿化,如Cu、Zn、Sb、Mo、Ag、Au、Pb、U等、在我国尚属新类型矿床。 相似文献