共查询到16条相似文献，搜索用时 156 毫秒
1.
针对波浪能转换装置(WEC)研究重点主要集中在能量捕获效率方面,而忽略其附带的消波功能的问题。基于Open FOAM程序,建立垂荡浮子式波浪能发电装置与桩式约束的浮式防波堤的集成系统(OBC-FB)。主要研究WEC中的重要组件动力输出系统(PTO)对集成系统波能捕获效率及消波性能的影响。分析流体黏性影响下线性PTO系统的最优PTO阻尼特性。开发非线性电磁阻尼模型与线性PTO系统性能进行比较。结果显示,考虑黏性影响下线性的最优PTO阻尼系数略大于无黏的理论值;适当增大PTO阻尼系数可以获得更大的波能捕获宽度比(CWR),从而可以保证装置单位特征尺寸的波能转换效率更高,同时可以在更宽波况范围保证消波性能;相较于线性PTO阻尼系统,非线性电磁PTO阻尼系统可以更好地兼顾波能捕获效率和消波性能。因此,在OBC-FB集成系统的优化设计中,PTO阻尼系统是一个重要的优化参数。 相似文献
2.
3.
本文对同轴双浮子波能发电装置进行了深入研究。采用Fortran语言对AQWA进行二次开发,并施以线性及非线性PTO反力,实现了装置的运动模拟,获得了双浮子装置的水动力特性及捕能情况。研究表明,波浪周期及内外浮子质量对装置获能影响显著,建议选用质量比为0.8的双浮子装置,并将其放置于周期与外浮子固有周期接近的海域中以实现最优捕能。 相似文献
4.
《中国海洋大学学报(自然科学版)》2017,(6)
振荡浮子是当下波浪能发电装置中的一种典型形式,其能量俘获装置的设计及水动力学分析是波浪能开发利用技术中的一项关键技术。振荡浮子波能发电装置采用液压机构驱动发电机作为PTO系统,研究通过水工物理模型试验的方法,以浮子的水动力性能为主要内容,讨论了浮子在波浪场作用下的运动状态,以及考虑PTO后浮子的运动特性。通过两者对比,得出了振荡浮子在液压式非线性PTO作用下运动性能,为该类装置的实用化设计提供了参考依据。 相似文献
5.
点吸收式波能转换装置是具有较好应用前景的一种波浪能开发利用装置,其参数设计直接影响到波浪能开发利用的可行性与有效性。作者针对青岛斋堂岛目标海域海况,通过数值模拟首先应用单因素敏感性分析法分析了双浮子点吸收式波能转换装置的结构尺寸、锚固形式、波流夹角、PTO阻尼、PTO刚度等参数对装置俘能功率的独立影响规律。之后考虑多参数的综合影响,通过运用稳健设计方法,以上述参数为控制因子并确定合理的变动水准,将俘能功率作为评价标准,选取合理的正交实验L矩阵,得到了不同参数组合情况下的装置俘能功率并进行统计分析。结果表明,浮子尺寸、PTO阻尼、波流夹角对装置俘能功率影响较大,而PTO刚度、锚链与铅垂线夹角、锚链与波浪在水平面内的夹角对俘能功率影响不明显。提出的参数研究方法可为其他海域点吸收式波能转换装置参数设计提供参考。 相似文献
6.
垂荡式波浪能装置在海洋可再生能源开发中被广泛应用,通过浮子与摇杆在垂荡方向的相对运动吸收波浪能。在以往相关的运动预报数值分析中,通常基于微幅波假设,仅考虑浮子与摇杆在垂荡方向的运动,忽略摇杆其他自由度运动。建立并求解了垂荡式波浪能装置的非线性联合运动方程组,分析垂荡式波浪能装置的波浪载荷、浮子与平台连接处的受力情况。数值计算系统的运动响应,并将计算结果与已有的试验数据进行比较验证,结果表明数值模拟的垂荡式波能装置的运动响应与试验结果相符合。最后,应用本计算方法分析PTO(power take-off)参数对波能装置发电性能的影响。 相似文献
7.
波能装置-浮式防波堤是将浮式防波堤与波能转换装置集成,兼具防波消浪和捕获波浪能的集成装置,能够有效降低单一功能波能转换装置的成本。研究者们提出了许多波能装置-浮式防波堤的结构型式,其中非对称式浮体结构相比于对称式浮体结构,在单向入射波的水动力性能方面拥有一定的优势。本文针对导桩锚泊的非对称式方箱-三角形挡浪板和方箱-垂直挡浪板两种浮体结构型式,通过数值模拟的方式,对比分析其水动力特性和波能俘获特性。数值模型基于黏性流体理论,以Navier-Stokes方程为控制方程,并采用VOF方法和浸没边界法求解自由面边界和流固耦合作用,探究不同入射波周期、水深和浮体排水条件下集成装置水动力性能（消波特性、能量耗散特性和波能俘获特性）变化趋势。结果表明,在近岸波浪条件下（5～8 s）,垂直挡板型式集成装置适用于较小周期波浪（5～6 s）,而三角挡板型式集成装置适用于较大周期波浪（6～7.5 s）。随着水深增大,波能俘获比总体上呈现缓慢增长的趋势。在主浮体吃水相同的情况下（排水量不同）,两种结构的透射系数基本一致;而在排水量相同（主浮体吃水不同）的情况下,垂直挡板结构型式的防波效果更好,三角挡板结构型... 相似文献
8.
浮式防波堤与振荡浮子式波浪能转换装置集成是一种较为合理的波浪能开发利用方式,基于方箱式浮式防波堤—波浪能转换集成系统和幕帘式防波堤的研究成果,提出了一种新型方箱—垂直挡浪板式浮式防波堤—波浪能转换集成系统,建立数学模型对该集成系统的水动力特性和能量输出特性进行研究。模型基于N-S方程,采用紧致插值曲线(CIP)方法结合浸没边界法(IBM)求解。运用数值模型探究在一定波浪条件下,动力输出系统(PTO)阻尼力的大小以及挡浪板对集成系统的水动力特性和能量转换特性的影响,得到如下结论:集成系统的俘获宽度比随PTO阻尼力的增大呈现先增大后减小的趋势,在阻尼力F_(PTO)=150 N时达到最大;相对于方箱型集成系统,增设0.1 m挡浪板后可使其最大俘获宽度比η_e提高33%左右;此外,集成系统的俘获宽度比随挡浪板长度增加而增大,增长趋势逐渐变缓,在挡浪板长度S_p=0.5 m时达到最大,此时俘获宽度比η_e=0.563 1。 相似文献
9.
底铰摇板式波浪能装置水动力性能解析研究 总被引：1，自引：1，他引：0
对底铰摇板式波浪能装置的水动力性能进行了解析研究,基于受约束浮体线性化运动方程,获得小幅线性波作用下装置动力响应和转换性能的解析解;采用解析解计算分析了水深、厚度、密度和PTO阻尼值四个参数选取对装置转换性能的影响.研究结果表明,底铰摇板式波浪能装置具有较宽的频率响应范围;在低频区,水深较大时装置俘获效率较高,而在高频区,水深较小时装置俘获效率较高;系统性能受摇板厚度的影响非常小;密度较小的摇板在高频区性能较好,而密度较大的摇板在低频区性能较好;设置恒定PTO阻尼的情况下,装置性能受FTO阻尼值影响显著,当FTO阻尼取低频辐射阻尼时,装置的俘获效率与满足阻尼匹配条件的情况基本相同;当采用的PTO阻尼与低频辐射阻尼值差别较大时,系统的俘获效率显著降低. 相似文献
10.
将海工构筑物作为海洋能获能装置的安装载体可大幅降低海洋能发电的成本,同时,海工构筑物等海上设施客观上存在利用海洋能实现能量供应的需求,因此海洋能发电装置与海工构筑物相互结合具有良好的综合效益,将是未来海洋能利用的一个发展方向。针对波浪能和潮流能两种海洋能发电方式,分别对柔性叶片潮流能水轮机与进海路集成利用技术;垂直轴和水平轴潮流能水轮机以及振荡浮子式波能装置与导管架石油平台集成利用技术;OWC波能装置与沉箱防波堤集成利用技术进行了探讨,并提出海工构筑物海洋能集成利用技术中需要解决的几点问题。 相似文献
11.
The fluid viscosity is known to have a significant effect on the hydrodynamic characteristics which are linked to the power conversion ability of the wave energy converter (WEC). To overcome the disadvantages of case-by-case study through the experiments and numerical computations employed by the former researches, the viscous effect is studied comprehensively for multiple geometries in the present paper. The viscous effect is expressed as the viscous added mass and damping solved by the free-decay method. The computational fluid dynamics (CFD) method is employed for the calculation of the motion and flow field around the floater. The diameter to draft ratio and bottom shape are considered for the geometrical evaluation on the viscous effect. The results show that a slenderer floater presents a stronger viscous effect. Through the comparisons of the floaters with four different bottom shapes, the conical bottom is recommended in terms of low viscous effect and simple geometry for manufacture. A viscous correction formula for a series of cylindrical floaters is put forward, for the first time, to help the engineering design of outer-floaters of point-absorber WECs. 相似文献
12.
Compared with solar and wind energy, wave energy is a kind of renewable resource which is enormous and still under development. In order to utilize the wave energy, various types of wave energy converters (WECs) have been proposed and studied. And oscillating-body WEC is widely used for offshore deployment. For this type of WEC, the oscillating motion of the floater is converted into electricity by the power take off (PTO) system, which is usually mathematically simplified as a linear spring and a damper. The linear PTO system is characteristic of frequency-dependent response and the energy absorption is less powerful for off resonance conditions. Thus a nonlinear snap through PTO system consisting of two symmetrically oblique springs and a linear damper is applied. A nonlinear parameter γ is defined as the ratio of half of the horizontal distance between the two oblique springs to the original length of both springs. JONSWAP spectrum is utilized to generate the time series of irregular waves. Time domain method is used to establish the motion equation of the oscillating-body WEC in irregular waves. And state space model is applied to replace the convolution term in the time domain motion equation. Based on the established motion equation, the motion response of both the linear and nonlinear WEC is numerically calculated using 4th Runge–Kutta method, after which the captured power can be obtained. Then the influences of wave parameters such as peak frequency, significant wave height, damping coefficient of the PTO system and the nonlinear parameter γ on the power capture performance of the nonlinear WEC is discussed in detail. Results show that compared with linear PTO system, the nonlinear snap through PTO system can increase the power captured by the oscillating body WEC in irregular waves. 相似文献
13.
透空式防波堤周围的非线性波浪传播的数值模拟 总被引：1，自引：0，他引：1
对非线形波浪在透空式防波堤周围的波浪变形进行了数值模拟,在Boussinesq波浪方程中加入与透空建筑物有关的新的耗散项,从而界定了透空建筑物引起的部分反射和透射,波浪折射衍射的传播过程通过控制方程求解。波浪控制方程通过有限差分方法求解。模型应用于模拟波浪经过具有部分反射的群桩式透空结构,结果表明透空式防波堤可以有效地衰减波浪,是重力式结构的一种替代形式。 相似文献
14.
Raft-type wave energy converter (WEC) is a multi-mode wave energy conversion device, using the relative pitch motion to drive its hydraulic power take-off (PTO) units for capturing energy from the ocean waves. The hydraulic PTO unit as its energy conversion module plays a significant role in storing large qualities of energy and making the output power smooth. However, most of the previous investigations on the raft-type WECs treat the hydraulic PTO unit as a linear PTO unit and do not consider the dynamics of the hydraulic circuit and components in their investigations. This paper is related to a two-raft-type WEC consisting of two hinged rafts and a hydraulic PTO unit. The aim of this paper is to make an understanding of the dynamics of the hydraulic PTO unit and how these affect the performance of the two-raft-type WEC. Therefore, a combined hydrodynamic and hydraulic PTO unit model is proposed to investigate and optimize the performance of the two-raft-type WEC; and based on the simulation of the combined model, the relationships between the optimal power capture ability, the optimal magnitude of the hydraulic PTO force and the wave states are numerically revealed. Results show that an approximately square wave type hydraulic PTO force is produced by the hydraulic PTO unit, which causes the performance of the two-raft-type WEC not to be sinusoidal and the energy capturing manner different from that of the device using a linear PTO unit; moreover, there is an optimal magnitude of the hydraulic PTO force for obtaining an optimal power capture ability, which can be achieved by adjusting the parameters of the hydraulic PTO unit; in regular waves, the optimal power capture ability as well as the optimal magnitude of the hydraulic PTO force normalized by the wave height presents little relationship with the wave height, mainly depends on the wave period; in irregular waves, the trends of the optimal power capture ability and the normalized optimal magnitude of the hydraulic PTO force against the peak wave periods at different significant wave heights are generally identical and show a good correlation. All means that the hydraulic PTO unit of the two-raft-type WEC can be tuned to the wave states, and these would provide a valuable guidance for the optimal design of its hydraulic PTO unit. 相似文献
15.
An Oscillating Water Column (OWC) device can output energy through reciprocating or unidirectional airflow. The unidirectional airflow is helpful to utilize a simple and high-efficiency unidirectional air turbine. The pentagonal BBDB proposed by us based on OWC principle can be regarded as a floating Oscillating Body and its Power Take-Off (PTO) consists of a chamber, a water column, a turbine and a generator. The Capture Width Ratio (CWR) of the pentagonal BBDB model with the reciprocating and unidirectional airflow was studied in this paper. The wave flume test results indicate the mean CWR of the pentagonal BBDB model with reciprocating airflow can reach up to 121.91% and the mean CWR of the model with unidirectional airflow could reach 100.94% during the whole wave cycle in regular waves. For irregular waves, the mean CWR of the model with the unidirectional airflow is as high as 62.83% during the whole wave cycle. Hopefully, the combination of the pentagonal BBDB with the check valve to output power during the air exhalation and conventional high-efficiency unidirectional turbine will improve the total efficiency of the BBDB. 相似文献
16.
Floating oscillating bodies constitute a large class of wave energy converters, especially for offshore deployment. Usually the Power-Take-Off (PTO) system is a directly linear electric generator or a hydraulic motor that drives an electric generator. The PTO system is simplified as a linear spring and a linear damper. However the conversion is less powerful with wave periods off resonance. Thus, a nonlinear snap-through mechanism with two symmetrically oblique springs and a linear damper is applied in the PTO system. The nonlinear snap-through mechanism is characteristics of negative stiffness and double-well potential. An important nonlinear parameter is defined as the ratio of half of the horizontal distance between the two springs to the original length of both springs. Time domain method is applied to the dynamics of wave energy converter in regular waves. And the state space model is used to replace the convolution terms in the time domain equation. The results show that the energy harvested by the nonlinear PTO system is larger than that by linear system for low frequency input. While the power captured by nonlinear converters is slightly smaller than that by linear converters for high frequency input. The wave amplitude, damping coefficient of PTO systems and the nonlinear parameter affect power capture performance of nonlinear converters. The oscillation of nonlinear wave energy converters may be local or periodically inter well for certain values of the incident wave frequency and the nonlinear parameter , which is different from linear converters characteristics of sinusoidal response in regular waves. 相似文献