共查询到20条相似文献，搜索用时 15 毫秒
1.
基于DEM的青海贵德地区地形起伏度的研究 总被引：5，自引：0，他引：5
基于贵德地区1：5万地形图等高线数据内插生成的DEM数据,在ArcMap软件空间分析支持及Spss软件拟合曲线统计下,得到该地区地形起伏度提取的最佳窗口为400m×400m;基于400×400m2的分析窗口,提取贵德地区的地形起伏度,完成地形起伏度的专题图,统计分析高程与起伏度之间的相互关系,其结果与实际情况基本吻合。 相似文献
2.
规划总图设计软件GPCAD是基于AUTOCAD软件开发的,用于城市总体规划、控制性详细规划,主要功能有地形处理、地形分析、土石方量计算等。GPCAD软件采用方格网法进行土石方量计算,本文介绍了规划总图设计软件GPCAD计算土石方的基本原理,介绍了方格网划分、零点位置计算和工程量计算公式。矿山地质环境问题主要包括地形地貌破坏、土地资源占压和生态破坏等,矿山开采过程中形成的大量废弃土石方是造成上述问题的根源。因此,矿山地质环境治理工程项目设计、施工通常涉及到大面积的地形整治工程和大规模土石方量的计算,本文结合矿山地质环境治理工程设计实例,通过计算范围确定、方格网布设、自然标高采集、设计标高设定,介绍了各步骤的操作方法,运用GPCAD进行大规模土石方量计算,计算得出区块土石方挖、填方量和净方量。 相似文献
3.
Stratigraphic, topographic, and ground‐penetrating radar data obtained from a ca. 1800‐year‐old embankment and adjacent ditch at the Hopewell Mound Group (Chillicothe, Ohio) are used to validate the archaeological application of a simple finite‐differences diffusion model employed frequently to assess geomorphic change in natural landscapes. Although diffusion models have been used to describe the topographic degradation of landforms in a variety of geomorphic terrains, the approach has not been applied to ancient earthworks in an archaeological context. The results of this study indicate that a variety of initial earthwork forms can result in the sinusoidal profile apparent on the current landscape. Using the model results to interpret the field data, we suggest that the initial embankment form was steeper and the adjacent ditch was deeper. As a result of natural degradation processes, the earthwork widened and flattened over time. These results have broad implications for any study aimed at: (1) assessing the function of original earthwork forms, (2) determining the formation processes of complicated stratigraphies or artifact assemblages, (3) estimating the time and labor investment required for construction, or (4) identifying the socio‐political structures necessary to build earthworks. © 2005 Wiley Periodicals, Inc. 相似文献
4.
Satellite altimetry has been widely used to determine surface elevation changes in polar ice sheets. The original height measurements are irregularly distributed in space and time. Gridded surface elevation changes are commonly derived by repeat altimetry analysis (RAA) and subsequent spatial interpolation of height change estimates. This article assesses how methodological choices related to those two steps affect the accuracy of surface elevation changes, and how well this accuracy is represented by formal uncertainties. In a simulation environment resembling CryoSat-2 measurements acquired over a region in northeast Greenland between December 2010 and January 2014, different local topography modeling approaches and different cell sizes for RAA, and four interpolation approaches are tested. Among the simulated cases, the choice of either favorable or unfavorable RAA affects the accuracy of results by about a factor of 6, and the different accuracy levels are propagated into the results of interpolation. For RAA, correcting local topography by an external digital elevation model (DEM) is best, if a very precise DEM is available, which is not always the case. Yet the best DEM-independent local topography correction (nine-parameter model within a 3,000 m diameter cell) is comparable to the use of a perfect DEM, which exactly represents the ice sheet topography, on the same cell size. Interpolation by heterogeneous measurement-error-filtered kriging is significantly more accurate (on the order of 50% error reduction) than interpolation methods, which do not account for heterogeneous errors.
相似文献5.
Assessment of flood hazard,vulnerability and risk of mid-eastern Dhaka using DEM and 1D hydrodynamic model 总被引：1，自引：0，他引：1
Floods are regular feature in rapidly urbanizing Dhaka, the capital city of Bangladesh. It is observed that about 60% of the
eastern Dhaka regularly goes under water every year in monsoon due to lack of flood protection. Experience gathered from past
devastating floods shows that, besides structural approach, non-structural approach such as flood hazard map and risk map
is effective tools for reducing flood damages. In this paper, assessment of flood hazard by developing a flood hazard map
for mid-eastern Dhaka (37.16 km2) was carried out by 1D hydrodynamic simulation on the basis of digital elevation model (DEM) data from Shuttle Radar Topography
Mission and the hydrologic field-observed data for 32 years (1972–2004). As the topography of the area has been considerably
changed due to rapid land-filling by land developers which was observed in recent satellite image (DigitalGlobe image; Date
of imagery: 7th March 2007), the acquired DEM data were modified to represent the current topography. The inundation simulation
was conducted using hydrodynamic program HEC-RAS for flood of 100-year return period. The simulation has revealed that the
maximum depth is 7.55 m at the southeastern part of that area and affected area is more than 50%. A flood hazard map was prepared
according to the simulation result using the software ArcGIS. Finally, to assess the flood risk of that area, a risk map was
prepared where risk was defined as the product of hazard (i.e., depth of inundation) and vulnerability (i.e., the exposure
of people or assets to flood). These two maps should be helpful in raising awareness of inhabitants and in assigning priority
for land development and for emergency preparedness including aid and relief operations in high-risk areas in the future. 相似文献
6.
Topographic maps are fundamental for geoarchaeological field studies and archaeological excavations. However, traditional methods of topographic mapping, as well as modern high‐tech methods such as airborne laser scanning and photogrammetry of high‐resolution satellite images, are often cost‐ineffective for field studies in terms of time, money, and labor. We here propose a method to measure topography for archaeological sites and surrounding areas quickly and accurately, using a laser range finder (LRF) and differential global positioning system DGPS. Three‐dimensional coordinates of points on land surfaces are measured through the LRF, targeted from multiple measuring locations whose positions are acquired with the DGPS. The point data are then interpolated to produce a digital elevation model (DEM) using a geographic information system (GIS). High‐resolution DEMs can be obtained with this method, with horizontal and vertical accuracies on the order of 10 cm. We here demonstrate the method for measuring detailed topography of the Hacituğrul Tepe in central Turkey. Digital topography data incorporated in GIS can also be part of an archaeological database, providing opportunities for quantitative analyses of topography and archaeological materials. © 2009 Wiley Periodicals, Inc. 相似文献
7.
High-resolution digital elevation models are crucial to the investigation of natural disasters, and a variety of methods based on visualization and relief map compilations have been proposed. In this study, the sky view factor (SVF) is applied to slope maps and a digital elevation model (DEM) of the Oso landslide, a deadly landslide that occurred in Washington State on March 22, 2014, to demonstrate the effectiveness of SVF-enhanced relief maps in mapping and evaluating large-scale or deep-seated landslide hazards. A procedure for combining the SVF-enhanced DEM with slope and elevation maps is also presented. Then the maps are used to extract the landslide-prone areas and perform a reactivation analysis of the post-Oso landslide using an analytic hierarchy process (AHP). By using the SVF-enhanced DEM to perform the AHP assessment on multi-period images, we accurately evaluate hazard of the landslide for both pre and post-2014 conditions. Finally, different visualization maps, limitation and recommend parameters for generating SVF relief map are presented in the paper. 相似文献
8.
数字地图的三维可视化研究及其若干应用 总被引：3，自引：0，他引：3
三维可视化理论与技术的引入使得传统静态的、平面的地图向动态的、三维的方向发展, 地图的三维可视化正成为GIS与数字制图领域的一个新的研究课题.数字地图及其建库技术的研究为其三维可视化研究提供了有力的技术支持和充足的数据来源.主要研究基于等高线与离散高程点的地形模型(DEM) 的建立、兼顾地形(即基于DEM) 的街区与街道、居民地模型的建立, 以及植被、道路、水系等各主要要素的三维模型的建立及其显示, 对三维点状地图符号库的建立、模型的动态显示及航空影像的叠加显示等进行了研究.最后对三维可视化技术在基于数字地图的地貌晕渲、模拟飞行、虚拟城市等方面的应用作了探讨. 相似文献
9.
The release of a digital elevation model (DEM) for Australia on a 9″ (～250 m) grid has enabled the computation of gravimetric terrain corrections thus allowing the computation of complete Bouguer anomalies across the continent. The terrain correction was calculated through a two‐dimensional fast Fourier transform algorithm applied to a linear, planar approximation of the terrain‐correction formula, and with a constant topographic density of 2670 kg.m‐3. The technique was applied to two datasets in order to test for instabilities in the terrain‐correction algorithm: the original 9″ DEM, and a 27″ DEM averaged from the 9″ data. The 27″ terrain corrections were compared with values supplied by the Australian Geological Survey Organisation in Tasmania: 86% of these data were found to agree within 3.91 μm.s‐2; 98% agreed to within 5.32 μm.s‐2 (1σ). 相似文献
10.
在甘肃和青海交界地区的1：257Y民和县幅、临夏市幅和定西市幅数字区域地质调查中,以“数字填图系统（RGMAP）”为平台,使用遥感ETM^＋数据和地形数据对岩石地层进行了信息挖掘。数据准备主要是遥感和数字地形多源信息的提取和预处理．从数字地形图的等高线数据中提取高程,进而提取汇水网络等水文信息和地形参数。遥感数据经过地形校正、线性增强、色彩拉伸,进行空间分辨率增强,经彩色合成并结合数字高程,实现了对调查区构造-地层区划和部分岩石地层单元的识别。实践证明该项工作是地质填图的重要辅助手段。 相似文献
11.
利用ASTER卫星立体像对提取喀斯特数字地形模型——以广西大化高峰丛深洼地喀斯特地貌为例 总被引：2，自引：2，他引：0
ASTER卫星立体像对已经被成功地用于提取全球数字地形模型（DEM）,其有效性已经在不同类型的非喀斯特地貌区域得到验证。和一般地貌相比,喀斯特地形,特别是中国南方喀斯特,具有自己独特的形态特征。能否从ASTER影像中精确地提取喀斯特地貌DEM目前尚未见到有任何报道。本文利用ASTER影像成功地提取了广西大化地区高峰丛深洼地的喀斯特地貌DEM,并且将提取结果与同一地区1∶5万地形图控制点的高程和4个剖面的高程变化进行了对比。研究区内绝大部分区域是喀斯特地貌,但在其西北部有一舌状砂岩地貌分布,从而提供了一个很好的喀斯特和非喀斯特地貌DEM精度对比的机会。本文的研究结果表明,从ASTER影像提取出来的砂岩地貌的DEM均方根误差要小于喀斯特地区,表明从ASTER影像中能更有效地提取非喀斯特地貌的DEM。相比之下,提取得到的喀斯特DEM精确度则稍差。究其原因主要是因为研究区内独特的高峰丛深洼地地形形态。由于峰丛地形的阴影在构成立体像对的两幅影像（nadir-looking和aft-loo-king）上的大小和形态差异很大,导致了DEM生产过程中两幅影像不能精确配准,从而产生比较大的误差。相比之下,砂岩地区地貌相对比较平坦,地形阴影大小和形态在两幅影像上差别不大,故而能得到精度比较高的数字地形模型。本文研究结果同时还表明适当增加地面控制点能在一定程度上改善提取出来的喀斯特地貌DEM的精度。尽管提取的数字地形模型精度稍低,其均方根误差仍然远远小于该地区峰丛和洼地个体体量。因此本研究认为从ASTER立体像对提取的数字地形模型可广泛用于喀斯特地貌形态特征研究。 相似文献
12.
Ben De Mol Max Kozachenko Andy Wheeler Hugo Alvares Jean-Pierre Henriet Karine Olu-Le Roy 《International Journal of Earth Sciences》2007,96(1):103-120
High-resolution seismic profiles, swath bathymetry, side-scan sonar data and video imageries are analysed in this detailed
study of five carbonate mounds from the Belgica mound province with special emphasis on the well-surveyed Thérèse Mound. The
selected mounds are located in the deepest part of the Belgica mound province at water depths of 950 m. Seismic data illustrate
that the underlying geology is characterised by drift sedimentation in a general northerly flowing current regime. Sigmoidal
sediment bodies create local slope breaks on the most recent local erosional surface, which act as the mound base. No preferential
mound substratum is observed, neither is there any indication for deep geological controls on coral bank development. Seismic
evidence suggests that the start-up of the coral bank development was shortly after a major erosional event of Late Pliocene–Quaternary
age. The coral bank geometry has been clearly affected by the local topography of this erosional base and the prevailing current
regime. The summits of the coral banks are relatively flat and the flanks are steepest on their upper slopes. Deposition of
the encased drift sequence has been influenced by the coral bank topography. Sediment waves are formed besides the coral banks
and are the most pronounced bedforms. These seabed structures are probably induced by bottom current up to 1 m/s. Large sediment
waves are colonised by living corals and might represent the initial phase of coral bank development. The biological facies
distribution of the coral banks illustrate a living coral cap on the summit and upper slope and a decline of living coral
populations toward the lower flanks. The data suggest that the development of the coral banks in this area is clearly an interaction
between biological growth processes and drift deposition both influenced by the local topography and current regime. 相似文献
13.
Modelling of piping collapses and gully headcut landforms:Evaluating topographic variables from different types of DEM 总被引：1，自引：0，他引：1
Alireza Arabameri Fatemeh Rezaie Subodh Chandra Pal Artemi Cerda Asish Saha Rabin Chakrabortty Saro Lee 《地学前缘(英文版)》2021,12(6):129-146
The geomorphic studies are extremely dependent on the quality and spatial resolution of digital elevation model(DEM)data.The unique terrain characteristics of a particular landscape are derived from DEM,which are responsible for initiation and development of ephemeral gullies.As the topographic features of an area significantly influences on the erosive power of the water flow,it is an important task the extraction of terrain features from DEM to properly research gully erosion.Alongside,topography is highly correlated with other geo-environmental factors i.e.geology,climate,soil types,vegetation density and floristic composition,runoff generation,which ultimately influences on gully occurrences.Therefore,terrain morphometric attributes derived from DEM data are used in spatial prediction of gully erosion susceptibility(GES)mapping.In this study,remote sensing-Geographic information system(GIS)tech-niques coupled with machine learning(ML)methods has been used for GES mapping in the parts of Semnan province,Iran.Current research focuses on the comparison of predicted GES result by using three types of DEM i.e.Advanced Land Observation satellite(ALOS),ALOS World 3D-30 m(AW3D30)and Advanced Space borne Thermal Emission and Reflection Radiometer(ASTER)in different resolutions.For further progress of our research work,here we have used thirteen suitable geo-environmental gully erosion conditioning factors(GECFs)based on the multi-collinearity analysis.ML methods of conditional inference forests(Cforest),Cubist model and Elastic net model have been chosen for modelling GES accordingly.Variable's importance of GECFs was measured through sensitivity analysis and result show that elevation is the most important factor for occurrences of gullies in the three aforementioned ML methods(Cforest=21.4,Cubist=19.65 and Elastic net=17.08),followed by lithology and slope.Validation of the model's result was performed through area under curve(AUC)and other statistical indices.The validation result of AUC has shown that Cforest is the most appropriate model for predicting the GES assessment in three different DEMs(AUC value of Cforest in ALOS DEM is 0.994,AW3D30 DEM is 0.989 and ASTER DEM is 0.982)used in this study,followed by elastic net and cubist model.The output result of GES maps will be used by decision-makers for sustainable development of degraded land in this study area. 相似文献
14.
Veena Joshi Devidas Tambe Gorakh Dhawade 《Journal of the Geological Society of India》2009,73(3):355-370
One of the most serious limitations in studying the surface morphometry of a badland landscape is the nonavailability of a
very fine resolution data which is essential for such types of studies. Local relief of most of the badlands in India and
also from other parts of the world exhibit limited relief amplitude, often within a few meters. The paper reports a case study
carried out in a riverine badland formed along the Western Deccan Trap Region. An attempt has been made in the present paper
to extract the morphometric variables of the landscape from the DEMs derived from a high resolution field generated data,
because the accuracy of the DEM derived values are dependent on the pixel resolution of the DEM from which they are generated.
The size of the pixel resolution should be fixed differently for different landscapes depending on the landscape process in
the area. The local relief of the area is around 10 m and for such types of landscapes the topographical maps and also the
web-available DEMs are of very coarse resolutions which are not suitable for the analysis. Therefore two well defined tributary
catchments were chosen from the area under investigation and theodolite surveys were carried out, contours were generated
with 10 cm interval, DEMs were derived by using Arc GIS software. SRTM (Shuttle Radar Topography Mission) 90 m resolution
data were utilized to generate DEM for the whole basin. Hypsometric and the drainage basin parameters were extracted from
these data by using the same software. Fractal dimension of the whole basin and the sample basins were also obtained for the
same data. The morphometric data generated were used to understand the geomorphic processes operating in the area. 相似文献
15.
地形特征(如高程和坡度)和水文特征(如河流长度和河流坡度)是分布式流域水文水质模型的基础输入参数,用于量化描述模型模拟流域的自然特征。这些特征参数的准确性直接影响水文水质过程模拟的准确性。应用数字高程模型(Digital Elevation Model,DEM)在4个不同地形的子流域研究了10种不同分辨率DEM对平均高程、流域面积、坡度、河流坡度、最长河长等参数的影响。结果表明,随着DEM分辨率降低,流域地形变缓,流域平均坡度逐渐减小;随着DEM网格分辨率的变化,子流域划分范围和河道位置也都可能发生变化,且该变化在地形起伏较小的丘陵平原地区较明显,子流域集水面积和河长进一步随之改变;河流坡度随DEM分辨率降低则呈无规则变化。从地形和水文参数两方面揭示了DEM 分辨率在分布式流域模型中的不确定性影响。 相似文献
16.
冰川流速是冰川动力状况的重要标志,利用合成孔径雷达技术能快速获得大范围冰川的表面流速.利用日本高级陆地观测卫星(ALOS)相控阵型合成孔径雷达L波段(PALSAR)及欧洲太空局的ENVISAT/ASAR数据的特征匹配方法获得帕米尔高原公格尔山区冰川表面流速,并结合合成孔径雷达干涉相干与不同时期数字高程模型对公格尔山区典型冰川动力进行分析,获得研究区不同时间基线冰川表面相干性、表面流速以及基于不同时相DEM的典型冰川表面高程变化信息.结果表明:30 a来克拉牙依拉克冰川表面高程下降了(15±12.1)m,表碛区域近期运动速度变化不大;其木干冰川平均表面高程几乎无变化,但2007-2011年夏季表面流速明显减缓,靠近末端附近部分区域可能已经演化为非活动区;姜满加尔冰川位于西风带的迎风坡,积累区面积大,冰川流速较快,无表碛覆盖,但表面高程仍下降了(8.8±12.7)m.编号为5Y663D0009的冰川冰舌表碛覆盖区可能已经演化为非活动区,30 a来表面高程下降(8.6±12.0)m.综合分析表明,冰川规模特别是积累区面积的大小及所处位置、地形对冰川演化具有重要影响. 相似文献
17.
In mountainous areas, topographic shading effects exert significant influence on the spatial distribution of solar irradiance on the land surface, which should be considered in estimating and modeling physical, biological, and hydrological processes. Various algorithms have been proposed for quantitative assessment of the impact of topography on the arriving solar radiation on slopes in mountainous area based on digital elevation model (DEM). However, different algorithms tend to produce different results even based on the same DEM. In this study, two algorithms for determining the maximum horizontal viewing angle of terrain obstruction were compared in a catchment in the Qilian Mountains, Northwest China, which were identical except for the way in interpreting DEM. Two algorithms for calculating sky view factor were also compared. Then, different algorithm combinations were compared and their sensitivities to the horizontal resolution of DEM were investigated. Results showed that the differences in outputs of different algorithms and combinations were significant and cannot be ignored in estimating the spatial distribution of solar irradiance in mountainous areas. A simple ground validation concluded that the algorithm assuming a linear variation in elevation was a little better than that assuming a stepped variation in elevation in and among neighboring DEM cells. For calculating diffuse solar radiation, the algorithm based on a sloped coordinate system was theoretically better than that based on a horizontal coordinate system. It is worth noting that even though the estimated annual mean of solar irradiance over the study area was almost the same among some algorithm combinations, the difference in spatial distribution was significant, which may lead to consequent difference in assessing or modeling some other environmental variables relevant to surface energy exchange, e.g., evaporation, snowmelt, and ground temperature. However, the analysis in this study was mainly theoretical, and further ground-based validations should be made in future. 相似文献
18.
Vertical accretion of impounded marsh and adjacent natural marsh at four sites in southwestern Louisiana was estimated in 1994 by determining the depth of a stratum containing137Cs deposited in 1963. With relative marsh elevation, soil bulk density, organic matter content, and organic and mineral matter accumulation rates were used to describe soil formation. Three sites were impounded in 1956 and one site in 1951. Impounded marshes had lower marsh surface elevation than natural marshes because of hydrologic isolation from tidal sediment subsidies and substrate oxidation during forced drying. The elevation of natural marshes ranged from 12 cm to 42 cm higher than the elevation of the impounded marshes in 1963 and from 20 cm to 32 cm higher in 1994. Vertical accretion between 1963 and 1994 ranged from 9 cm to 28 cm in impounded marsh and from 15 cm to 21.5 cm in natural marsh. Only in impounded marsh that remained permanently flooded was accretion greater than in natural marsh. 相似文献
19.
Mukesh Gupta Kamini Kanta Mohanty Devendra Kumar Ramanuj Banerjee 《Environmental Earth Sciences》2014,71(6):2875-2883
This paper investigates surface elevation changes that occurred during 1996–2004 in the Jharia coalfield through the digital elevation model (DEM) generated using synthetic aperture radar interferometry (InSAR) using ERS-1/2 (European Remote Sensing Satellite) tandem and RADARSAT-1 data. The comparison of elevation values derived from the InSAR DEM and topographic height data shows a bias of 23.08 m with root-mean-square error of ±2.31 m (5.8 %). The accuracy of the DEM was investigated by comparing the elevation profiles with the digitized elevation contour data at four different locations. The profile comparison shows a mean bias of 22.68 m. Local topography shows changes in elevation up to ±40.00 m due to mining activities on the 8-year time period. The results of InSAR-derived heights and topographic heights were comparable and well-matched except at a few locations where topographic data were unavailable. DEM generated using InSAR due to its high spatial details is ideal for the detection and estimation of surface elevation changes in mining areas. 相似文献
20.
The present paper deals with morphometric analysis of Koshalya-Jhajhara (K-J) watershed, tributaries of Ghaggar in northwestern India. The area forms a rugged topography having elevation range from 399 m to 1810 m MSL. Aster DEM and SOI toposheets have been used to calculate various parameters using Geographic Information System (GIS). Linear, areal and relief aspects for morphometric analysis were calculated using GIS. Total number of streams in the watershed are 991 out of which 543 are of 1st order, 259 are of 2nd order, 124 are of 3rd order, 58 are of 4th order and only 7 are of 5th order. The order of stream determines the chances of flood in the stream. Higher the stream order more the probabilities of flood. The present paper indicates that K-J watershed is of 5th order and less elongated in shape having lower peak flows of longer duration with dendritic pattern and having fine drainage texture. Bifurcation ratio varies from 3 to 5 which indicate that geological structures don’t have dominant influence on drainage pattern. High slope is witnessed in NE part and low slope in SW part with very low gradient ratio. Variables like stream frequency and drainage density determines the volume of the water discharge and its speed of flow in the river channels. Higher the stream frequency and drainage density more will be the probability of floods. These variables also effects temporal variations in the speed at which the water flows in the stream when flood reaches its peak. 相似文献