首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract– Melt‐bearing impactites dominated by suevite, and with a minor content of clast‐rich impact melt rock, are found within the central part of the Gardnos structure. They are preserved as the eroded remnants in the relatively small complex impact structure with a present diameter of 5 km. These rocks have been mapped in the field and in the Branden drill core, and described according to mineralogy/petrology, including matrix, litho clast, and melt content, as well as geochemistry. Based on our extensive field mapping, a simple 3‐D model of the original crater was constructed to estimate tentative volumes for the melt‐bearing impactites. The variations in lithic and melt fragment content and chemistry of suevite matrix can mostly be explained by incorporation of mafic rocks into a dominant mixture of granitic, gneissic, and quartzitic target rocks, reflecting mixing of material from different parts of the crater. Melt fragments within suevite occur with a variety of shapes and textures, probably related to different original target rock composition, to the various temperatures the individual fragments were subjected to during the impact event and deposition processes. This study discusses the impact‐related deposits based on a sedimentological approach. Their overall composition and structures indicate dominating gravity flow processes in the final transportation and deposition of the suevite.  相似文献   

2.
Abstract— Metal‐troilite textures are examined in metamorphosed and impact‐affected ordinary chondrites to examine the response of these phases to rapid changes in temperature. Complexly intergrown metal‐troilite textures are shown to form in response to three different impact‐related processes. (1) During impacts, immiscible melt emulsions form in response to spatially focused heating. (2) Immediately after impact events, re‐equilibration of heterogeneously distributed heat promotes metamorphism adjacent to zones of maximum impact heating. Where temperatures exceed ～850 ° C, this post‐impact metamorphism results in melting of conjoined metal‐troilite grains in chondrites that were previously equilibrated through radiogenic metamorphism. When the resulting Fe‐Ni‐S melt domains crystallize, a finely intergrown mixture of troilite and metal forms, which can be zoned with kamacite‐rich margins and taenite‐rich cores. (3) At lower temperatures, post‐impact metamorphism can also cause liberation of sulfur from troilite, which migrates into adjacent Fe‐Ni metal, allowing formation of troilite and occasionally copper within the metal during cooling. Because impact events cause heating within a small volume, post‐impact metamorphism is a short duration event (days to years) compared with radiogenic metamorphism (>106 years). The fast kinetics of metal‐sulfide reactions allows widespread textural changes in conjoined metal‐troilite grains during post‐impact metamorphism, whereas the slow rate of silicate reactions causes these to be either unaffected or only partially annealed, except in the largest impact events. Utilizing this knowledge, information can be gleaned as to whether a given meteorite has suffered a post‐impact thermal overprint, and some constraints can be placed on the temperatures reached and duration of heating.  相似文献   

3.
Projectile–target interactions as a result of a large bolide impact are important issues, as abundant extraterrestrial material has been delivered to the Earth throughout its history. Here, we report results of shock‐recovery experiments with a magnetite‐quartz target rock positioned in an ARMCO iron container. Petrography, synchrotron‐assisted X‐ray powder diffraction, and micro‐chemical analysis confirm the appearance of wüstite, fayalite, and iron in targets subjected to 30 GPa. The newly formed mineral phases occur along shock veins and melt pockets within the magnetite‐quartz aggregates, as well as along intergranular fractures. We suggest that iron melt formed locally at the contact between ARMCO container and target, and intruded the sample causing melt corrosion at the rims of intensely fractured magnetite and quartz. The strongly reducing iron melt, in the form of μm‐sized droplets, caused mainly a diffusion rim of wüstite with minor melt corrosion around magnetite. In contact with quartz, iron reacted to form an iron‐enriched silicate melt, from which fayalite crystallized rapidly as dendritic grains. The temperatures required for these transformations are estimated between 1200 and 1600 °C, indicating extreme local temperature spikes during the 30 GPa shock pressure experiments.  相似文献   

4.
Impact melt‐bearing clastic deposits (suevites) are one of the most important records of the impact cratering process. A deeper understanding of their composition and formation is therefore essential. This study focuses on impact melt particles in suevite at Ries, Germany. Textures and chemical evidence indicate that the suevite contains three melt types that originate from different shock levels in the target. The most abundant melt type (“melt type 1”) represents well‐mixed whole‐rock melting of crystalline basement and includes incompletely mixed mafic melt schlieren (“melt type 1 mafic”). Polymineralic melt type 2 comprises mixes between monomineralic melt types 3 and melt type 1. Melt types 2 and 3 are located within melt type 1 as small patches or schlieren but also isolated within the suevite matrix. The main melt type 1 is heterogeneous with respect to trace elements, varying geographically around the crater: in the western sector, it has lower values in trace elements, e.g., Ba, Zr, Th, and Ce, than in the eastern sector. The west–east zoning likely reflects the heterogeneous nature of crystalline basement target rocks with lower trace element contents, e.g., Ba, Zr, Th, and Ce, in the west compared to the east. The chemical zoning pattern of suevite melt type 1 indicates that mixing during ejection and emplacement occurred only on a local (hundreds of meters) scale. The incomplete larger scale mixing indicated by the preservation of these local chemical signatures, and schlieren corroborate the assumption that mixing, ejection, and quenching were very rapid, short‐lived processes.  相似文献   

5.
Abstract– The processes leading to formation of sometimes massive occurrences of pseudotachylitic breccia (PTB) in impact structures have been strongly debated for decades. Variably an origin of these pseudotachylite (friction melt)‐like breccias by (1) shearing (friction melting); (2) so‐called shock compression melting (with or without a shear component) immediately after shock propagation through the target; (3) decompression melting related to rapid uplift of crustal material due to central uplift formation; (4) combinations of these processes; or (5) intrusion of allochthonous impact melt from a coherent melt body has been advocated. Our investigations of these enigmatic breccias involve detailed multidisciplinary analysis of millimeter‐ to meter‐sized occurrences from the type location, the Vredefort Dome. This complex Archean to early Proterozoic terrane constitutes the central uplift of the originally >250 km diameter Vredefort impact structure in South Africa. Previously, results of microstructural and microchemical investigations have indicated that formation of very small veinlets involved local melting, likely during the early shock compression phase. However, for larger veins and networks it was so far not possible to isolate a specific melt‐forming mechanism. Macroscopic to microscopic evidence for friction melting is very limited, and so far chemical results have not directly supported PTB generation by intrusion of impact melt. On the other hand, evidence for filling of dilational sites with melt is abundant. Herein, we present a new approach to the mysterium of PTB formation based on volumetric melt breccia calculations. The foundation for this is the detailed analysis of a 1.5 × 3 × 0.04 m polished granite slab from a dimension‐stone quarry in the core of the Vredefort Dome. This slab contains a 37.5 dm3 breccia zone. The pure melt volume in 0.1 m3 PTB‐bearing granitic target rock outside of the several‐decimeter‐wide breccia zone in the granite slab was estimated at 5.2 dm3. This amount can be divided into 4.6 dm3 melt (88%), for which we have evidenced a limited material transport (at maximum, ≈20 cm) and 0.6 dm3 melt (12%) with, at most, grain‐scale material transport, which we consider in situ formed shock melt. The breccia zone itself contains about 10 dm3 of matrix (melt). Assuming melt exchange over 20 cm at the slab surface, between breccia zone and surrounding melt‐bearing host rock volume, the outer melt volume is calculated to contain the same amount of melt as contained by the massive breccia zone. Meso‐ and microscopic observations indicate melt transport is more prominent from larger into smaller melt occurrences. Thus, melt of the breccia zone could have provided the melt fill for all the small‐scale PTB veins in the surrounding target rock. Extrapolating this melt capacity calculation for 1 m3 PTB‐bearing host rock shows that a host rock volume of this dimension is able to take up some 52 dm3 melt. Scaling up 1000‐fold to the outcrop scale reveals that exchange between a host rock volume of 2 m radius around a 37 m3 breccia zone could involve some 10 m3 melt. These results demonstrate that large melt volumes (i.e., large breccia zones) can be derived, in principle, from local reservoirs. However, strong decompression would have to apply in order to exchange these considerable melt volumes, which would only be realistic during the decompression phase of impact cratering upon central uplift formation, or locally where compressive regimes acted during the subsequent down‐ and outward collapse of the central uplift.  相似文献   

6.
Shatter cones are one of the most widely recognized pieces of evidence for meteorite impact events on Earth, but the process responsible for their formation is still debated. Evidence of melting on shatter cone surfaces has been rarely reported in the literature from terrestrial impact craters but has been recently observed in impact experiments. Although several models for shatter cones formation have been proposed, so far, no one can explain all the observed features. Shatter cones' from the Vista Alegre impact structure, Brazil, formed in fine‐grained basalt of the Jurassic‐Cretaceous Serra Geral Formation (Paraná large igneous province). A continuous quenched melt film, consisting of a crystalline phase, mica, and amorphous material, decorates the striated surface. Ultracataclasites, containing subrounded pyroxene clasts in an ultrafine‐grained matrix, occur subparallel to the striated surface. Several techniques were applied to characterize the crystalline phase in the melt, including Raman spectroscopy and transmission electron microscopy. Results are not consistent with any known mineral, but they do suggest a possible rare or new type of clinopyroxene. This peculiar evidence of melting and cataclasis in relation with shatter cone surfaces is interpreted as the result of tensile fracturing at the tip of a fast propagating shock‐induced rupture, which led to the formation of shatter cones at the tail of the shock front, likely during the early stage of the impact events.  相似文献   

7.
Abstract— Impact cratering is an important geological process on the terrestrial planets and rocky and icy moons of the outer solar system. Impact events generate pressures and temperatures that can melt a substantial volume of the target; however, there remains considerable discussion as to the effect of target lithology on the generation of impact melts. Early studies showed that for impacts into crystalline targets, coherent impact melt rocks or “sheets” are formed with these rocks often displaying classic igneous structures (e.g., columnar jointing) and textures. For impact structures containing some amount of sedimentary rocks in the target sequence, a wide range of impact‐generated lithologies have been described, although it has generally been suggested that impact melt is either lacking or is volumetrically minor. This is surprising given theoretical constraints, which show that as much melt should be produced during impacts into sedimentary targets. The question then arises: where has all the melt gone? The goal of this synthesis is to explore the effect of target lithology on the products of impact melting. A comparative study of the similarly sized Haughton, Mistastin, and Ries impact structures, suggests that the fundamental processes of impact melting are basically the same in sedimentary and crystalline targets, regardless of target properties. Furthermore, using advanced microbeam analytical techniques, it is apparent that, for the structures under consideration here, a large proportion of the melt is retained within the crater (as crater‐fill impactites) for impacts into sedimentary‐bearing target rocks. Thus, it is suggested that the basic products are genetically equivalent but they just appear different. That is, it is the textural, chemical and physical properties of the products that vary.  相似文献   

8.
Abstract Buck Mountain Wash (BMW) is a new genomict breccia (H3‐5) found in the Franconia (H5) strewn field in Arizona that shows complex brecciation and shock effects. It contains three distinct chondritic lithologies in sharp contact: a) a main lithology that consists primarily of petrographic type 5 material but which has finely intermixed type 3 and 4 material, b) a shock‐blackened (shock stage S5) type 3 lithology (lithology A), and c) a shock‐blackened type 3/4 lithology (lithology B). Buck Mountain Wash was lithified after impact‐mixing and impact‐melting of weakly and strongly metamorphosed materials, possibly at depth in the regolith of the parent body. Shock effects included brecciation on a fine scale, localized impact‐melting of silicates, partial melting, and mobilization of metal‐sulfide, and chemical fractionations that produced non‐H‐group composition kamacite by two disequilibrium mechanisms. Shock heating did not cause significant thermal metamorphism in the shock‐blackened lithologies of BMW, except possibly in areas adjacent to whole‐rock shock melt. During lithification, cooling must have been rapid at high temperatures to preserve glass and inhomogeneous silicate compositions, but not so fast at lower temperatures as to produce dendritic metal‐sulfide globules or martensite.  相似文献   

9.
The Paleoproterozoic Dhala structure with an estimated diameter of ~11 km is a confirmed complex impact structure located in the central Indian state of Madhya Pradesh in predominantly granitic basement (2.65 Ga), in the northwestern part of the Archean Bundelkhand craton. The target lithology is granitic in composition but includes a variety of meta‐supracrustal rock types. The impactites and target rocks are overlain by ~1.7 Ga sediments of the Dhala Group and the Vindhyan Supergroup. The area was cored in more than 70 locations and the subsurface lithology shows pseudotachylitic breccia, impact melt breccia, suevite, lithic breccias, and postimpact sediments. Despite extensive erosion, the Dhala structure is well preserved and displays nearly all the diagnostic microscopic shock metamorphic features. This study is aimed at identifying the presence of an impactor component in impact melt rock by analyzing the siderophile element concentrations and rhenium‐osmium isotopic compositions of four samples of impactites (three melt breccias and one lithic breccia) and two samples of target rock (a biotite granite and a mafic intrusive rock). The impact melt breccias are of granitic composition. In some samples, the siderophile elements and HREE enrichment observed are comparable to the target rock abundances. The Cr versus Ir concentrations indicate the probable admixture of approximately 0.3 wt.% of an extraterrestrial component to the impact melt breccia. The Re and Os abundances and the 187Os/188Os ratio of 0.133 of one melt breccia specimen confirm the presence of an extraterrestrial component, although the impactor type characterization still remains inconclusive.  相似文献   

10.
  相似文献   

11.
Abstract— Portales Valley (PV) is an unusual metal‐veined meteorite that has been classified as an H6 chondrite. It has been regarded either as an annealed impact melt breccia, as a primitive achondrite, or as a meteorite with affinities to silicated iron meteorites. We studied the petrology of PV using a variety of geochemical‐mineralogical techniques. Our results suggest that PV is the first well‐documented metallic‐melt meteorite breccia. Mineral‐chemical and other data suggest that the protolith to PV was an H chondrite. The composition of FeNi metal in PV is somewhat fractionated compared to H chondrites and varies between coarse vein and silicate‐rich portions. It is best modeled as having formed by partial melting at temperatures of ?940–1150 °C, with incomplete separation of solid from liquid metal. Solid metal concentrated in the coarse vein areas and S‐bearing liquid metal concentrated in the silicate‐rich areas, possibly as a result of a surface energy effect. Both carbon and phosphorus must have been scavenged from large volumes and concentrated in metallic liquid. Graphite nodules formed by crystallization from this liquid, whereas phosphate formed by reaction between P‐bearing metal and clinopyroxene components, depleting clinopyroxene throughout much of the meteorite and growing coarse phosphate at metal‐silicate interfaces. Some phosphate probably crystallized from P‐bearing liquids, but most probably formed by solid‐state reaction at ?975‐725 °C. Phosphate‐forming and FeO‐reduction reactions were widespread in PV and entailed a change in the mineralogy of the stony portion on a large scale. Portales Valley experienced protracted annealing from supersolidus to subsolidus temperatures, probably by cooling at depth within its parent body, but the main differences between PV and H chondrites arose because maximum temperatures were higher in PV. A combination of a relatively weak shock event and elevated pre‐shock temperatures probably produced the vein‐and‐breccia texture, with endogenic heating being the main heat source for melting, and with stress waves from an impact event being an essential trigger for mobilizing metal. Portales Valley is best classified as an H7 metallic‐melt breccia of shock stage S1. The meteorite is transitional between more primitive (chondritic) and evolved (achondrite, iron) meteorite types and offers clues as to how differentiation could have occurred in some asteroidal bodies.  相似文献   

12.
Martian meteorite Elephant Moraine A79001 (EET 79001) has received considerable attention for the unusual composition of its shock melt glass, particularly its enrichment in sulfur relative to the host shergottite. It has been hypothesized that Martian regolith was incorporated into the melt or, conversely, that the S‐enrichment stems from preferential melting of sulfide minerals in the host rock during shock. We present results from an electron microprobe study of EET 79001 including robust measurements of major and trace elements in the shock melt glass (S, Cl, Ni, Co, V, and Sc) and minerals in the host rock (Ni, Co, and V). We find that both S and major element abundances can be reconciled with previous hypotheses of regolith incorporation and/or excess sulfide melt. However, trace element characteristics of the shock melt glass, particularly Ni and Cl abundances relative to S, cannot be explained either by the incorporation of regolith or sulfide minerals. We therefore propose an alternative hypothesis whereby, prior to shock melting, portions of EET 79001 experienced acid‐sulfate leaching of the mesostasis, possibly groundmass feldspar, and olivine, producing Al‐sulfates that were later incorporated into the shock melt, which then quenched to glass. Such activity in the Martian near‐surface is supported by observations from the Mars Exploration Rovers and laboratory experiments. Our preimpact alteration model, accompanied by the preferential survival of olivine and excess melting of feldspar during impact, explains the measured trace element abundances better than either the regolith incorporation or excess sulfide melting hypothesis does.  相似文献   

13.
Drill core UNAM‐7, obtained 126 km from the center of the Chicxulub impact structure, outside the crater rim, contains a sequence of 126.2 m suevitic, silicate melt‐rich breccia on top of a silicate melt‐poor breccia with anhydrite megablocks. Total reflection X‐ray fluorescence analysis of altered silicate melt particles of the suevitic breccia shows high concentrations of Br, Sr, Cl, and Cu, which may indicate hydrothermal reaction with sea water. Scanning electron microscopy and energy‐dispersive spectrometry reveal recrystallization of silicate components during annealing by superheated impact melt. At anhydrite clasts, recrystallization is represented by a sequence of comparatively large columnar, euhedral to subhedral anhydrite grains and smaller, polygonal to interlobate grains that progressively annealed deformation features. The presence of voids in anhydrite grains indicates SOx gas release during anhydrite decomposition. The silicate melt‐poor breccia contains carbonate and sulfate particles cemented in a microcrystalline matrix. The matrix is dominated by anhydrite, dolomite, and calcite, with minor celestine and feldspars. Calcite‐dominated inclusions in silicate melt with flow textures between recrystallized anhydrite and silicate melt suggest a former liquid state of these components. Vesicular and spherulitic calcite particles may indicate quenching of carbonate melts in the atmosphere at high cooling rates, and partial decomposition during decompression at postshock conditions. Dolomite particles with a recrystallization sequence of interlobate, polygonal, subhedral to euhedral microstructures may have been formed at a low cooling rate. We conclude that UNAM‐7 provides evidence for solid‐state recrystallization or melting and dissociation of sulfates during the Chicxulub impact event. The lack of anhydrite in the K‐Pg ejecta deposits and rare presence of anhydrite in crater suevites may indicate that sulfates were completely dissociated at high temperature (T > 1465 °C)—whereas ejecta deposited near the outer crater rim experienced postshock conditions that were less effective at dissociation.  相似文献   

14.
Abstract— Here we present the results of a geochemical study of the projectile component in impactmelt rocks from the Lappajärvi impact structure, Finland. Main‐ and trace‐element analyses, including platinum group elements (PGEs), were carried out on twenty impact‐melt rock samples from different locations and on two shocked granite fragments. The results clearly illustrate that all the impact melt rocks are contaminated with an extraterrestrial component. An identification of the projectile type was performed by determining the projectile elemental ratios and comparing the corresponding element ratios in chondrites. The projectile elemental ratios suggest an H chondrite as the most likely projectile type for the Lappajärvi impact structure. The PGE composition of the highly diluted projectile component (?0.05 and 0.7 wt% in the impact‐melt rocks) is similar to the recent meteorite population of H chondrites reaching Earth. The relative abundance of ordinary chondrites, including H, L, and LL chondrites, as projectiles at terrestrial impact structures is most likely related to the position of their parent bodies relative to the main resonance positions. This relative abundance of ordinary chondrites suggests a strong bias of the impactor population toward inner Main Belt objects.  相似文献   

15.
Petrographic and geochemical data obtained on the Araguainha impact crater (Goiás/Mato Grosso States, Brazil) indicate the existence of several molten products that originated during impact‐induced congruent melting of an alkali‐granite exposed in the inner part of the central uplift of the structure. Although previous studies have described these melts to some extent, there is no detailed discussion on the petrographic and geochemical variability in the granite and its impactogenic derivatives, and therefore, little is known about the geochemical behavior and mobility of trace elements during its fusion in the central part of the Araguainha crater. This paper demonstrates that the preserved granitoid exposed in the core of the structure is a magnesium‐rich granite, similar to postcollisional, A‐type granites, also found in terrains outside the Araguainha crater, in the Brasília orogenic belt. The molten products are texturally distinct and different from the original rock, but have very similar geochemical composition, making it difficult to separate these lithotypes based on concentrations of major and minor elements. This also applies for trace and rare earth elements (REE), thus indicating a high degree of homogenization during impact‐induced congruent melting under high pressure and postshock temperature conditions. Petrographic observations, along with geochemical data, indicate that melting occurs selectively, where some of the elements are transported with the melt. Simultaneously, there is an effective dissolution of the rock (granite), which leads to entrainment of the most resistant solid phases (intact or partially molten minerals) into the melt. Minerals more resistant to melting, such as quartz and oxides, contribute substantially to a chemical balance between the preserved granite and the fusion products generated during the meteoritic impact.  相似文献   

16.
Abstract— We report new petrographic and chemical data for the equilibrated EL chondrite Grein 002, including the occurrence of osbornite, metallic copper, abundant taenite, and abundant diopside. As inferred from low Si concentrations in kamacite, the presence of ferroan alabandite, textural deformation, chemical equilibration of mafic silicates, and a subsolar noble gas component, we concur with Grein 002's previous classification as an EL4‐5 chondrite. Furthermore, the existence of pockets consisting of relatively coarse, euhedral enstatite crystals protruding large patches of Fe‐Ni alloys suggests to us that this EL4‐5 chondrite has been locally melted. We suspect impact induced shock to have triggered the formation of the melt pockets. Mineralogical evidence indicates that the localized melting of metal and adjacent enstatite must have happened relatively late in the meteorite's history. The deformation of chondrules, equilibration of mafic silicates, and generation of normal zoning in Fe, Zn‐sulfides took place during thermal alteration before the melting event. Following parent body metamorphism, daubreelite was exsolved from troilite in response to a period of slow cooling at subsolidus temperatures. Exsolution of schreibersite from the coarse metal patches probably occurred during a similar period of slow cooling subsequent to the event that induced the formation of the melt pockets. Overall shock features other than localized melting correspond to stage S2 and were likely established by the final impact that excavated the Grein 002 meteoroid.  相似文献   

17.
Abstract— The Haughton impact structure has been the focus of systematic, multi‐disciplinary field and laboratory research activities over the past several years. Regional geological mapping has refined the sedimentary target stratigraphy and constrained the thickness of the sedimentary sequence at the time of impact to ?1880 m. New 40Ar–39Ar dates place the impact event at ?39 Ma, in the late Eocene. Haughton has an apparent crater diameter of ?23 km, with an estimated rim (final crater) diameter of ?16 km. The structure lacks a central topographic peak or peak ring, which is unusual for craters of this size. Geological mapping and sampling reveals that a series of different impactites are present at Haughton. The volumetrically dominant crater‐fill impact melt breccias contain a calcite‐anhydrite‐silicate glass groundmass, all of which have been shown to represent impact‐generated melt phases. These impactites are, therefore, stratigraphically and genetically equivalent to coherent impact melt rocks present in craters developed in crystalline targets. The crater‐fill impactites provided a heat source that drove a post‐impact hydrothermal system. During this time, Haughton would have represented a transient, warm, wet microbial oasis. A subsequent episode of erosion, during which time substantial amounts of impactites were removed, was followed by the deposition of intra‐crater lacustrine sediments of the Haughton Formation during the Miocene. Present‐day intra‐crater lakes and ponds preserve a detailed paleoenvironmental record dating back to the last glaciation in the High Arctic. Modern modification of the landscape is dominated by seasonal regional glacial and niveal melting, and local periglacial processes. The impact processing of target materials improved the opportunities for colonization and has provided several present‐day habitats suitable for microbial life that otherwise do not exist in the surrounding terrain.  相似文献   

18.
Abstract– Two new fragments of the Almahata Sitta meteorite and a sample of sand from the related strewn field in the Nubian Desert, Sudan, were analyzed for two to six carbon aliphatic primary amino acids by ultrahigh performance liquid chromatography with UV‐fluorescence detection and time‐of‐flight mass spectrometry (LC‐FT/ToF‐MS). The distribution of amino acids in fragment #25, an H5 ordinary chondrite, and fragment #27, a polymict ureilite, were compared with results from the previously analyzed fragment #4, also a polymict ureilite. All three meteorite fragments contain 180–270 parts‐per‐billion (ppb) of amino acids, roughly 1000‐fold lower than the total amino acid abundance of the Murchison carbonaceous chondrite. All of the Almahata Sitta fragments analyzed have amino acid distributions that differ from the Nubian Desert sand, which primarily contains l ‐α‐amino acids. In addition, the meteorites contain several amino acids that were not detected in the sand, indicating that many of the amino acids are extraterrestrial in origin. Despite their petrological differences, meteorite fragments #25 and #27 contain similar amino acid compositions; however, the distribution of amino acids in fragment #27 was distinct from those in fragment #4, even though both are polymict ureilites from the same parent body. Unlike in CM2 and CR2/3 meteorites, there are low relative abundances of α‐amino acids in the Almahata Sitta meteorite fragments, which suggest that Strecker‐type chemistry was not a significant amino acid formation mechanism. Given the high temperatures that asteroid 2008 TC3 appears to have experienced and lack of evidence for aqueous alteration on the asteroid, it is possible that the extraterrestrial amino acids detected in Almahata Sitta were formed by Fischer‐Tropsch/Haber‐Bosch type gas‐grain reactions at elevated temperatures.  相似文献   

19.
Zak?odzie is an enstatite meteorite of unknown petrogenesis. Chemically, it resembles enstatite chondrites, but displays an achondrite‐like texture. Here we report on fabric and texture analyses of Zak?odzie utilizing X‐ray computed tomography and scanning electron microscopy and combine it with a nanostructural study of striated pyroxene by transmission electron microscopy. With this approach we identify mechanisms that led to formation of the texture and address the petrogenesis of the rock. Zak?odzie experienced a shock event in its early evolution while located at some depth inside a warm parent body. Shock‐related strain inverted pyroxene to the observed mixture of intercalated orthorhombic and monoclinic polymorphs. The heat that dissipated after the peak shock was added to primary, radiogenic‐derived heat and led to a prolonged thermal event. This caused local, equilibrium‐based partial melting of plagioclase and metal‐sulfide. Partial melting was followed by two‐stage cooling. The first phase of annealing (above 500 °C) allowed for crystallization of plagioclase and for textural equilibration of metal and sulfides with silicates. Below 500 °C, cooling was faster and more heterogeneous at cm scale, allowing retention of keilite and quenching of K‐rich feldspathic glass in some parts. Our study indicates that Zak?odzie is neither an impact melt rock nor a primitive achondrite, as suggested in former studies. An impact melt origin is excluded because enstatite in Zak?odzie was never completely melted and partial melting occurred during equilibrium‐based postshock conditions. Texturally, the rock represents a transition of chondrite and achondrite and was formed when early impact heat was added to internal radiogenic heat.  相似文献   

20.
Abstract— Crystal‐bearing lunar spherules (CLSs) in lunar breccia (14313, 14315, 14318), soil (68001, 24105), and impact‐melt rock (62295) samples can be classified into two types: feldspathic and olivine‐rich. Feldspathic CLSs contain equant, tabular, or acicular plagioclase grains set in glass or a pyroxene‐olivine mesostasis; the less common olivine‐rich CLSs contain euhedral or skeletal olivine set in glass, or possess a barred‐olivine texture. Bulk‐chemical and mineral‐chemical data strongly suggest that feldspathic CLSs formed by impact melting of mixtures of ferroan anorthosite and Mg‐suite rocks that compose the feldspathic crust of the Moon. It is probable that olivine‐rich CLSs also formed by impact melting, but some appear to have been derived from distinctively magnesian lunar materials, atypical of the Moon's crust. Some CLSs contain reversely‐zoned “relic” plagioclase grains that were not entirely melted during CLS formation, thin (≤5 μm thick) rims of troilite or phosphate, and chemical gradients in glassy mesostases attributed to metasomatism in a volatile‐rich (Na‐K‐P‐rich) environment. Crystal‐bearing lunar spherules were rimmed and metasomatized prior to brecciation. Compound CLS objects are also present; these formed by low‐velocity collisions in an environment, probably an ejecta plume, that contained numerous melt droplets. Factors other than composition were responsible for producing the crystallinity of the CLSs. We agree with previous workers that relatively slow cooling rates and long ballistic travel times were critical features that enabled these impact‐melt droplets to partially or completely crystallize in free‐flight. Moreover, incomplete melting of precursor materials formed nucleation sites that aided subsequent crystallization. Clearly, CLSs do not resemble meteoritic chondrules in all ways. The two types of objects had different precursors and did not experience identical rimming processes, and vapor fractionation appears to have played a less important role in establishing the compositions of CLSs than of chondrules. However, the many detailed similarities between CLSs and chondrules indicate that it is more difficult to rule out an origin for some chondrules by impact melting than some have previously argued. Differences between CLSs, chondrules, and their host rocks possibly can be reconciled with an impact‐melt origin for some chondrules when different precursors, the higher gravity of the Moon compared to chondrite parent bodies, and the likely presence of nebular gas during chondrule formation are taken into account.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号