共查询到20条相似文献，搜索用时 296 毫秒
1.
Basement-involved structures associated with reverse, vertical and normal faults commonly involve non-parallel shear within a triangular deformation (trishear) zone located on the front limbs of the structures. Deformation within the trishear zone is characterized by shear gradients and an associated decrease in the dips of the beds in stratigraphically higher units. Geometric models suggest that the layer-parallel strain within the trishear zone depends on the type of fault (normal, reverse, or vertical), the dip and throw of the fault, the dip of the anticlinal or synclinal axial surfaces, and the distance of any unit above the initial tip of the trishear zone, located at the basement-sediment contact. At any given location, reverse faults typically show increasing layer parallel shortening, followed by decreasing layer parallel shortening and a transition to extension, with increasing throw. The transition from contraction to extension occurs at lower values of throw for stratigraphically lower units and also for faults with smaller dips. Vertical and normal faults exhibit increasing layer-parallel extension of all units with increasing throw, with larger extension for stratigraphically lower units. Experimental models suggest that the trishear zone can expand with increasing fault throw. The strain within the trishear zones is accommodated largely by secondary faults, which are rotated with progressive deformation. The strain variations in the experiments closely mimic those predicted by the geometric models for reverse, vertical, and normal faults. 相似文献
2.
A series of linked extensional detachments, transfer faults, and sediment- and volcanic-filled half-grabens that pre-date regional folding are described in the Late Archaean Margaret anticline, Eastern Goldfields Province, Yilgarn Craton, Western Australia. Coeval structures and rock units include layer-parallel extensional detachments, transfer faults (high-angle rotational faults rooted in the detachments and linking layer-parallel shear zones with varying amounts of extension); felsic intrusions, either as granitoids emplaced in or below the detachments, or as fine-grained intrusive bodies emplaced above the detachments and controlled by the high-angle faults; and half-grabens controlled by the high-angle faults and filled with clastic sedimentary and volcanic rocks. At least 1500 m of section is excised across the detachments. The detachments and high-angle faults are folded by the east-northeast regional compression that formed the Margaret anticline. Extensional deformation in the Margaret anticline is correlated with the regionally recognised felsic magmatism and associated volcanic and volcaniclastic basin fill dated at approximately 2685–2670 Ma across the Eastern Goldfields Province. This suggests the extensional event was province-wide and post-dated initial greenstone deposition (at around 2705 Ma) but pre-dated regional compressive deformation. We suggest the extension is the result of a thermal anomaly in the crust, generated by the insulating effect of a thick pile (of the order of 10 km or greater) of mafic and ultramafic volcanic rocks on precursor Archaean felsic crust. The thermal anomaly has generated renewed production of felsic and mafic volcanic rocks, coeval with uplift and extension in the upper crust. 相似文献
3.
Peloponnesus in the south-western part of the Aegean is formed by a heterogeneous pile of alpine thrust sheets that was reworked
by normal faulting from Upper Miocene to recent times. Upper Miocene–Lower Pliocene extension in Mt Parnon was accommodated
by several mappable brittle detachment faults that exhibit a top-to-the-NE-ENE sense of shear. The hanging wall of the detachments
comprises a number of highly tilted fault blocks containing abundant evidence of intense internal deformation by normal faulting
and layer-parallel shearing contemporaneous with faulting. These fault blocks are remnants of a cohesive extensional block
that slipped to the NE-ENE and broke up along high-angle normal faults that sole into or are cut by the detachments. The largest
part of this block is located at the eastern edge of the metamorphic core forming the hanging wall of East Parnon high-angle
normal fault that excised part of the aforementioned detachments. The lowermost metamorphic Unit of the nappe-pile does not
seem to be affected by the previous extensional episode. Upper plate reconstruction shows that various units of the nappe-pile
were affected by high-angle normal faults that linked to detachment faults in the weaker layers. Since the Middle-Upper Pliocene
further exhumation of the metamorphic rocks has resulted in the formation of high-angle normal faults overprinting Neogene
extensional structures and cut the entire nappe-pile. This new fault system tilted the earlier extensional structures and
produced a NE-SW coaxial deformation of Mt Parnon. 相似文献
4.
This contribution addresses new structural data from Upper Cretaceous-Danian sedimentary rocks of the Fuegian Andes orogenic front in Argentina. The structures studied, called D′, were formed during the early foreland deformation of the orogen, in the Late Cretaceous-Danian, in times when South America and Antarctica were still connected. The strain analysis of these structures indicates that deformation occurred at upper-crustal depths, and was characterized by flexural folding accompanied by formation of pressure-solution tectonic foliations in zones of higher strain. Deformation intensities increase toward the hinterland and with depth. The history of deformation involved progression from layer-parallel shortening to folding above a detachment, and further formation of a forward-propagating thrust wedge. Layer-parallel shortening and incipient folding recorded in Maastrichtian-Danian rocks indicate the leading edge of D′ deformation. Non-coaxial finite strain orientations were involved during formation of D′ structures along the Fuegian Andes front. These finite strain orientations cannot be explained with the SW-NE regional contraction usually assumed to have driven Andean deformation in this region; alternatively, we consider that N-S contraction combined with buttressing against the cratonic foreland comprise a more suitable interpretation for D′ and younger deformation. 相似文献
5.
《Journal of Structural Geology》2003,25(10):1623-1644
Duplexes are a common feature in thrust belts at many scales. Their geometries vary significantly from antiformal stacks with significant forethrusting in the cover (e.g. southern Pyrennes, Spain) to triangle zones (e.g. foreland Canadian Rockies) to low-displacement individually spaced ramp-anticlines (e.g. Sub-Andean thrust belt, Bolivia). We present a series of physical experiments demonstrating that the strength of the décollements relative to that of the intervening and overlying rock layers plays a significant role in controlling the duplex style. The models comprise brittle layers made of dry quartz sand and décollements made of two types of viscous silicone polymers. The strength of the décollements in the models is a function of the shortening rate applied to the model. The relative strength of the décollements and surrounding rocks affects the development of active- or passive-roof duplexes (triangle zones). It also affects the amount of translation of individual thrust blocks and the spacing of thrust ramps, which in turn determine if a duplex evolves into an antiformal stack or into individually spaced ramp-anticlines. Model results indicate that specific associations of structural features form systematically under similar rheological and boundary conditions. The presence of relatively strong décollements promotes local underthrusting of the cover, individual ramp-anticlines, internal deformation of thrust sheets, low early layer-parallel shortening, and sequential towards-the-foreland propagation of structures. Weak décollements promote forethrusting of the cover, antiformal stacks, coeval growth of structures, and low internal strain, with the exception of significant early layer-parallel shortening. No underthrusting at a regional scale occurred in any model. 相似文献
6.
《Journal of Structural Geology》2001,23(2-3):379-392
Fault-slip data are used to reconstruct varying tectonic regimes associated with transverse fold development along the eastern and southern margins of the Jaca basin, southern Pyrenees, Spain. The Spanish Pyrenean foreland consists of thrust sheets and leading-edge décollement folds which developed within piggyback basins. Guara Formation limestones on the margins of the Jaca basin were deposited synchronously with deformation and are exposed in the External Sierra. Within the transverse folds, principal shortening axes determined from P and T dihedra plots of fault-slip data show a shift from steep shortening in stratigraphically older beds to NNE–SSW horizontal shortening in younger beds. Older strata are characterized by extensional faults interpreted to result from halotectonic (salt tectonics) deformation, whereas younger strata are characterized by contraction and strike-slip faults interpreted to result from thrust sheet emplacement. The interpretation of the timing for the shortening axes in the younger strata is supported by the observation that these axes are parallel to shortening axes determined from finite strain analysis, calcite twins, and regional thrusting directions determined from fault-related folds and slickenlines. This study shows that fault population analysis in syntectonic strata provides an opportunity to constrain kinematic evolution during orogeny. 相似文献
7.
M.P Coward 《Journal of Structural Geology》1982,4(3):247-256
The Caledonian thrust zones of Assynt show several examples of large fault-bounded structures, surge zones, up to 8 km2 in extent, which have moved further than adjacent rocks. Extensional faults can be traced into strike-slip faults and then to contractional imbricate faults. There are also zones of extensional and contractional flow as shown by strained bioturbation marks in the Cambrian Pipe Rock.Several other low-angle extensional fault zones have been recognized along the length of the Moine thrust zone, notably in the Kinlochewe district. Recognition of these extensional faults and local surge zones has solved several local problems such as the lack of continuity of the Glencoul thrust and the out-of-sequence character of some of the large low-angle faults. Though the thrust propagation direction was generally from east to west, in the transport direction, several of the eastern faults have been reactivated later and locally cut down as extensional faults. The ‘so-called’ Moine thrust shows extensional fault movement at several localities along its length.The extensional structures and the surge zones suggest that body forces have been important in driving the faults rather than just a push from the rear. The Moines and Moine thrust zone were presumably driven to the WNW by gravity spreading and thinning of the main Scottish Caledonides. 相似文献
8.
米仓山、南大巴山前缘构造特征及其形成机制 总被引：6，自引：0，他引：6
在对四川盆地东北部盆山结合部地表地质和石油地球物理资料综合分析的基础上,阐述了米仓山前缘构造、南大巴山前缘构造的几何学、运动学特征;发现了二者的共性和不同,二者均以双重构造为主,通过古生代构造层的叠置,而迅速抬升出露地表,米仓山前缘以被动顶板双重构造为主,即典型的"三角带"构造,南大巴山前缘以主动顶板双重构造为其显著特征;初步分析了原因,区域滑脱层,特别是嘉陵江组-雷口坡组膏盐岩滑脱层及古生界泥页岩滑脱层,构成了顶板和底板逆冲断层,其间的台地相碳酸盐岩构成了断夹块,受米仓山早期基底隆升和侧向挤压,形成了被动顶板双重构造,南大巴山递进挤压变形,形成了主动顶板双重构造。 相似文献
9.
A series of regional deformation phases is described for the metamorphic basement and the Permian cover in an area in the central Orobic Alps, northern Italy. In the basement deformation under low-grade amphibolite metamorphic conditions is followed by a second phase during retrograde greenschist conditions. These two phases predate the deposition of the Permian cover and are of probable Variscan age. An extensional basin formed on the eroded basement during the Late Carboniferous, filled with fan conglomerates and sandstones, and rhyolitic volcanic rocks. Well-preserved brittle extensional faults bound these basins. Further extension deformed basement and cover before the onset of Alpine compressional tectonics. Cover and basement were deformed together during two phases of compressional deformation of post-Triassic age, the first giving rise to tectonic inversion of the older extensional faults, the second to new thrust faults, both associated with south-directed nappe emplacement and regional folding. Foliations develop in the cover only during the first phase of deformation as part of the activity on “shortening faults”. Main activity on the Orobic thrust actually postdates the first phase of thrusting and foliation development in the cover. 相似文献
10.
略论华北地块北缘显生宙三类不同的造山作用 总被引：3，自引：0，他引：3
华北地块北缘显生宙发育3种不同类型的造山作用。古生代,华北地块北缘处于古亚洲洋构造域,造山作用属陆缘俯冲-碰撞型,形成以EW向至NEE向为主的褶皱、逆冲推覆构造及韧性剪切带等构造类型。造山机制与古亚洲洋板块向南俯冲-碰撞导致近SN向构造动力的挤压作用密切相关。中生代,华北地块北缘处于西滨太平洋构造域,造山作用以陆内挤压型为主,形成以NE-NNE向与近EW向为主的多期不同方向的褶皱、逆冲断裂、推覆构造、韧性剪切带及局部地区的固态塑性流变构造等构造类型;造山动力以古太平洋(或Izanagi)板块西向俯冲导致NW-NWW向强烈挤压力为主。新生代,华北地块北缘虽仍属西滨太平洋构造域,但造山作用以陆内伸展型为主,裂谷作用与陆内伸展构造居主导地位,褶皱变形微弱,张性-张扭性断裂活动显著,形成现今盆-山构造地貌格局;造山动力以NW-NWW向主张应力为主。造山类型的两次重大转换分别发生于早、中三叠世与晚白垩世。 相似文献
11.
I summarise observations within a continuous-discontinuous shear zone to discuss the local stress and strain conditions experienced within a mixed rheology shear zone undergoing volume loss and deformation approximating simple shear. The Chrystalls Beach Complex, New Zealand, comprises phacoids formed from dismembered beds by layer-parallel extension, enclosed within a relatively incompetent matrix. Local extension is generally subparallel to the regional direction of shortening, and overall it appears that layer-parallel extension is a geometrical necessity in low angle shear zones where significant flattening occurs in response to simple shear accompanied by volume loss.Preferential stress loading of phacoids is predicted by fibre-loading theory, and the failure of phacoids by brittle fracture is thereby governed by fibre stresses transferred from the matrix. The principal stress orientations in a phacoid are likely rotated relative to the matrix, and either parallel or perpendicular to the phacoid-matrix interface. As preferential loading of phacoids decreases the stress level in the matrix, an increased volume fraction of phacoids increases the strength of the shear zone as a whole. However, only small matrix volume fractions are required for the composite to act nearly as weak as the matrix. 相似文献
12.
Howard R. Williams 《Tectonophysics》1987,140(2-4):327-331
Differential shear stresses acting along or adjacent to a non-planar fault surface or shear zone may cause uneven acceleration during slip. Alternatively, at the initiating and closing stages of motion of parts of a stick-slip fault, localised shear stresses may be variable. Stress variation of this nature causes zones of relative compression and tension, especially close to the “stick” zones on the fault. In fissile rocks adjacent to the fault, kink bands form in zones of local relative compression, while stratal extension features such as veins, fractures and extensional crenulations might be expected in the corresponding zones of relative tension. Repetitive motion on the fault should therefore cause the development of a suite of kink bands superimposed on each other and on any complementary extensional structures. Field evidence indicates that the extensional structures are not developed to the same extent as the kinks, perhaps due to ductile flow during layer-parallel extension of phyllosilicate rocks.
The advantages of this model are that it does not require bulk shortening of the shear zone relative to the enclosing less strained rocks, nor does it depend on complex stress orientation changes. 相似文献
13.
J. Cembrano G. Gonzlez G. Arancibia I. Ahumada V. Olivares V. Herrera 《Tectonophysics》2005,400(1-4):105-125
Upper crustal strike-slip duplexes provide an excellent opportunity to address the fundamental question of fault zone development and strain partitioning in an evolving system. Detailed field mapping of the Mesozoic Atacama fault system in the Coastal Cordillera of Northern Chile documents the progressive development of second- and third-order faults forming a duplex at a dilational jog between two overstepping master faults: the sinistral strike-slip, NNW-striking, Jorgillo and Bolfin faults. These are constituted by a meter-wide core of foliated S-C ultracataclasite and cataclasite, flanked by a damage zone of protocataclasite, splay faults and veins. Lateral separation of markers along master faults is on the order of a few kilometers. Second-order, NW-striking, oblique-slip subsidiary fault zones do not show foliated ultracataclasite; lateral sinistral separations are in the range of 10 to 200 m with a relatively minor normal dip-slip component. In turn, third-order, east–west striking normal faults exhibit centimetric displacement. Oblique-slip (sinistral–normal) fault zones located at the southern termination of the Bolfin fault form a well-developed imbricate fan structure. They exhibit a relatively simple architecture of extensional and extensional-shear fractures bound by low displacement shear fractures. Kinematic analysis of fault slip data from mesoscopic faults within the duplex area, document that the NW-striking and the EW-striking faults accommodate transtension and extension, respectively. Examination of master and subsidiary faults of the duplex indicates a strong correlation between total displacement and internal fault structure. Faults started from arrays of en echelon extensional/extensional-shear fractures that then coalesced into throughgoing strike-slip faults. Further displacement leads to the formation of discrete bands of cataclasite and ultracataclasite that take up a significant part of the total displacement. We interpret that the duplex formed by progressive linkage of horsetail-like structures at the southern tip of the Bolfin fault that joined splay faults coming from the Jorgillo and Coloso faults. The geometry and kinematics of faults is compared with that observed in analog models to gain an insight into the kinematic processes leading to complex strike-slip fault zones in the upper crust. 相似文献
14.
《Geodinamica Acta》2013,26(3):145-167
Folds constitute a significant part within the dominantly extension-related deformation pattern of the Gediz Graben and their origin either extensional or contractional has been the subject of debate. Field and subsurface data presented in this paper suggest that folds of contractional and extensional origin coexist in the graben-fill sediments. Contractional folds are predominantly observed within the Alasehir formation. A north vergent, plunging, asymmetrical to overturned geometry characterizes these folds and they are commonly observed in association with south dipping both thrust and reverse faults; the presence of thrust/reverse faults in the Gediz Graben is documented for the first time here. Fault data suggest an approximately N–S direction of compression that has governed the contractional deformation. Yet the limited distribution of these structures prevents to relate them with confidence to a regional deformation phase. Extensional folds occur in association with normal faults either as structures longitudinal or transverse with respect to the general graben trend. Transverse folds are a very common within the buried graben block, owing to the lateral displacement gradients (lateral difference in offset) on the individual fault segments along the southern margin of the graben. Synclines and anticlines have formed at displacement maxima and minima, respectively. Thickness of strata increases at synclines and decreases at anticlines, thus indicating the syn-depositional origin of the folding. 相似文献
15.
印度-欧亚侧向碰撞带构造-岩浆演化的动力学背景与过程——以藏东三江地区构造演化为例 总被引：23，自引：22，他引：23
对于印度与欧亚板块的侧向碰撞带,即藏东三江地区的新生代构造分析揭示出三种不同性质的构造样式,它们形成于不同的地质时期,发育于不同的地壳层次：（1）区域规模至露头尺度上发育的具有薄皮属性的逆冲断层与推覆构造,它们广泛分布于三江地区,尤其是兰坪-思茅盆地内;（2）以红河-哀牢山断裂、澜沧江和怒江-高黎贡山断裂等为代表的区域高温型走滑韧性剪切带构造和局部发育的脆性走滑断裂构造,后者在中新生代盆地内部断裂更为发育;（3）遍布全区发育的变质核杂岩构造与地堑-半地堑盆地.区域岩浆活动性与区域构造事件的发生具有密切的时空联系.区域性递进收缩事件与走滑事件发生于碰撞过程的早期阶段,并随后伴随着早期具有岩石圈板块俯冲性质的碰撞弧高钾岩浆活动,而后期的递进伸展事件诱发了板内伸展环境中的晚期高钾岩浆活动.二者之间的碱性岩浆活动间歇期,对应着区域构造体制的转变与区域伸展作用的发生,变质核杂岩的发育与微弱的钙碱性岩浆活动是其最直接的表现.区域古地磁资料分析表明,印度-欧亚板块之间的板块相互作用、区域板块与地块的旋转以及由此所致的不同构造环境制约着各种地质事件的发生与发展.北向运动的印度板块的旋转致使三江地块在新生代演化中发生了两次规模与特点不一的地块旋转过程,即早期的大角度快速旋转和晚期的小角度慢速旋转事件.它们分别对应于早期的递进收缩变形、走滑事件和具有碰撞弧属性的碱性岩浆活动与中期的区域伸展、变质核杂岩的发育与微弱的钙碱性岩浆活动性,以及后期的递进伸展作用和晚期陆内碱性岩浆活动性. 相似文献
16.
燕山西段及北京西山晚中生代逆冲构造格局及其地质意义 总被引：18，自引：0，他引：18
燕山西段及北京西山晚中生代逆冲构造集中分布于三个NE向带状区域中,三个带状区域的间隔约为60km,延伸长度自东向西依次减小,呈现出明显的逆冲构造发育的三角形区域。三角形区域的北界为“内蒙地轴”南缘断裂西段,南西界与中元古代早期古盆地构造边界一致,东南部边界则与华北克拉通基底新太古代-古元古代中部碰撞造山带的东部边界大致吻合。逆冲构造具有基底卷入的厚皮构造与盖层内部的薄皮构造共存的构造属性,上盘运动方向总体指向NW,逆冲构造变形主要发生在140~130Ma。逆冲后伸展构造变形以发育在主要逆冲构造后侧为主,并利用先存构造薄弱带。先存构造薄弱带在有利区域构造应力和其他影响因素的作用下导致的构造活化,可能是燕山板内构造变形的重要机制之一。主要逆冲变形前后均有大规模岩浆活动的构造-岩浆时空组合表明,收缩构造造成地壳加厚及由此引发的深部地壳重熔,难以作为统一的机制对这些特征进行合理阐释,需要有其他方式的深部热物质与能量的参与。北京西山霞云岭—长操、教军场—大安山以及马兰—胡林等逆冲断层,是一个统一的大规模的逆冲构造的不同组成部分,具典型、连续的断坪-断坡结构,它形成于髫髻山组(148~146Ma)之后、南窖闪长岩(128Ma)侵入之前,而不是“印支期(或更早)”,它与南大寨—八宝山逆冲构造构成北京西山晚中生代逆冲构造格局。区域性的NW-SE向收缩构造作用及南大寨—八宝山逆冲构造上覆岩席的构造加载,可能是北京西山的蓝晶石带和硬绿泥石带为代表的高压动力变质作用的基本构造原因。 相似文献
17.
用面积平衡原理预测伸展断陷盆地中岩层内部应变及亚分辨正断层的方法 总被引：7，自引：1，他引：6
大多数地堑和半地堑是由深度近水平的拆离正断层控制的。根据面积平衡原理,这些伸展断陷盆地岩层的区域基准面至拆离断层面高度（h）与其损失面积（S）呈线性比例。拆离断层之上的盆地基底岩层的水平伸展量相同,因此,用“S－h图解法”可以确定拆离断层深度,并能在此基础上计算出岩层的总水平伸展量。伸展盆地中的总水平伸展量主要是由不同尺度的正断层的水平离距体现出来的。可观测解释的断层的水平位移可以通过测量盆地宽度、岩层长度等直接得到。用剖面面积平衡方法可计算出盆地各岩层的平行岩层面的应变,其中相当部分是由在观测尺度上不能直接解释出来的“亚分辨正断层”的小尺度位移造成的。因此,在分析伸展断陷盆地的构造样式、岩层力学性质基础上,有可能对计算得到的平行岩层的伸展应变进行合理评估,进而可以定量地预测“亚分辨正断层”的密度和可能的分布部位。 相似文献
18.
Deformational, metamorphic, monazite age and fabric data from Rengali Province, eastern India converge towards a multi-scale transpressional deformational episode at ca. 498–521 Ma which is linked with the latest phase of tectonic processes operative at proto-India-Antarctica join. Detailed sector wise study on mutual overprinting relationships of macro-to microstructural elements suggest that deformation was regionally partitioned into fold-thrust dominated shortening zones alternating with zones of dominant transcurrent deformation bounded between the thrust sense Barkot Shear Zone in the north and the dextral Kerajang Fault Zone in the south. The strain partitioned zones are further restricted between two regional transverse shear zones, the sinistral Riamol Shear Zone in the west and the dextral Akul Fault Zone in the east which are interpreted as synthetic R and antithetic R' Riedel shear plane, respectively. The overall structural disposition has been interpreted as a positive flower structure bounded between the longitudinal and transverse faults with vertical extrusion and symmetric juxtaposition of mid-crustal amphibolite grade basement gneisses over low-grade upper crustal rocks emanating from the central axis of the transpressional belt. 相似文献
19.
《Journal of Structural Geology》1999,21(8-9):939-948
Strains in rocks can be observed but ancient stresses can only be inferred. We should re-examine the potential of strain geometry as the key to understanding and interpreting common shear structures ranging from faults to plastic shear zones. The concept of failure along zero extension directions can be applied to natural structures in rocks and is predicated on strain compatibility between differently strained volumes. Zero extension directions are considered for two strain configurations, plane strain (k=1) and uniaxial shortening (k=0). The crucial difference between shear fractures, or faults, and plastic yield zones is that the former are preceded by dilatation while the latter are isovolumetric. Volume changes during deformation affect the orientations of zero extension directions and hence of the resulting structures. With isovolumetric strain, yield occurs on planes at 45° to the principal shortening direction in plane strain and at 54.7° to this axis in uniaxial shortening. Uniaxial shortening experiments on rock samples allow estimation of the relative volumetric strains when yield zones initiate. When this volumetric strain is used to estimate the orientation of shear fractures in plane strain, ca 70° dips are predicted for normal faults at high crustal levels, decreasing downwards to 45°. 相似文献
20.
Analysis Method for Predicting Strain in Interior Beds and Sub-Resolution Faults from Area Balance Theory in Extensional Basins 总被引：1，自引：0，他引：1
Groshong Jr R H 《中国地质大学学报(英文版)》2002,13(4)
Extensional basins include mainly grabens and half grabens displaced along a lower detachment. Based on area balance theory, there is a linear relationship between a height of regional and the lower detachment h on the outside of the basin and “lost area S“ from the regional in the basin. The pre-growth beds above lower detachment are of the same extensional displacement so that an “S-h diagram“ can be used to determine the depth to lower detachment and to calculate the total extensional displacement of the beds above the lower detachment. The extensional displacement is dominated by the heave of various scale normal faults. The displacement of obvious faults can be immediately figured out from the measured bed-length. The requisite extension calculated by area balance is the layer-parallel strain, which could be accommodated by displacement on sub-resolution faults. Accordingly, the layer-parallel strain can help us predict the magnitude and distribution of sub-resolution faults on the basis of analysis of the structural style and rheological behavior. 相似文献