共查询到20条相似文献,搜索用时 796 毫秒
1.
2.
卫星摄影三线阵CCD影像的EEP法空中三角测量(三) 总被引:1,自引:1,他引:0
4 平差方案及模拟数据平差实验4.1 自由网+控制点空中三角测量由前方交会(2.1)式,后方交会(2.2)式以及外方位元素平滑制约条件(2.3)式,可以构成类似经典的光束法空中三角测量,但由于EFP像点坐标是推算出来的,所以控制点不宜直接参与平差过程.于是平差要分成自由网平差及利用控制点作三维线性变换两个步骤.另一方面,卫星摄影中起始角元素大约在±0.5°左右,对于经典空中三角测量,角元素起始近似值均可按零处理.但在EFP平差中,φ角起始值φ0对空中三角测量,像元素起始近似值均可按零处理.在EFP平差中,φ角起始值φ0对整条航线的几何状态影响很大,必须采用特殊的程序预先加以确定.我们采用不断步进φ角值,比较由前方交会及(1.2)式计算的Y视差的均方根值最小者,即作为φ的最佳起始值.平差框图见图4. 相似文献
3.
卫星摄影三线阵CCD影像的EFP法空中三角测量(一) 总被引:10,自引:2,他引:8
系统地介绍了EFP法空中三角测量的基本思想、EFP像点坐标计算、平差的数学模型和卫生摄影测量的数字模拟,并以模拟数据进行了自由网+控制点平差、外方位元素量测值参与平差、外方位元素量测值常差的分离以及区域平差等实验计算和实验结果分析。通过研究分析得出结论:(1)三条基线的航线可以保证三线阵CCD影像光束法平差的几何强度;(2)控制点可以布设在航线首末端,二线交会区的高程精度比三线交会区仅低约1.4因子;(3)外方位元素观测值是三线阵CCD影像光束法平差不可缺少的数据,经过平差可以不同程度地提高平差的高程精度。即使外方位元素观测值达到现代的精度,光束法平差的高程精度仍比直接前方交会高,所以三线阵CCD相机比单线阵、双线阵相机在全球性无控制卫星摄影测量或外星球摄影测量方面有更大的优势。 相似文献
4.
三行线阵扫描数据的平差方案及精度分析 总被引:2,自引:0,他引:2
张森林 《武汉大学学报(信息科学版)》1988,(4)
本文对平行排列的三行线性阵列扫描仪获取的数据,按不同的平差方案做了大量实验和理论分析,找到了平差系统不定解条件和使平差系统有最佳几何状态的参数选择方案。 相似文献
5.
针对框幅式影像传统的空中三角测量算法不适用于三线阵影像, 因此必须设计相应的数学模型。三线阵推扫式传感器在成像时, 不同扫描线对应的摄影中心位置和姿态都不一样, 空中三角测量解算时, 外方位元素个数大于观测值个数, 理论上无法解算每一条扫描线的方位元素, 因此需要采用合适的数学模型模拟卫星轨道。目前常用的有3种轨道模型:线性多项式模型, 分段多项式模型和定向片模型。本文利用“天绘一号”卫星的真实数据, 在WGS-84坐标系统下进行3种模型的平差对比试验, 同时采用不同的控制点布设方案, 分析各模型在不同控制点布设方案下所能达到的精度水平。 相似文献
6.
根据机载扫描仪的特点和遥感用户的要求,精心研制了在脱机状态下运行的CCT格式器。其主要功能:(1)将模拟磁带上的多光谱遥感信息数字化,制成便于计算机处理的通用格式化产品——计算机兼容磁带(CCT);(2)读出CCT上的数据,进行图像的快速显示或硬拷贝;(3)对指定的子区目标,进行快速查找与定位。 本文详细论述CCT格式器硬件和软件设计特点,给出磁带数据格式,介绍一些使用情况。该格式器不仅作为机载扫描仪的主要配套设备之一,而且也适合那些需要处理大量磁带数据的图像处理系统。 相似文献
7.
Processing of Laser Scanner Data and Extraction of Structure Lines Using Methods of the Image Processing 总被引:3,自引:0,他引:3
SUILi-chun 《测绘学报》2004,33(1):63-70
激光扫描数据提供了一种新的手段用于获取高精度的数字地形表面模型. 原始的航空激光扫描数据表达的是一些非规则分布的"点云", 这些非规则分布的点需要进行有效的事后处理. 这种事后处理有2个目的:一是将那些分布在地表面上的点(即地面点)与分布在非地表面上的点(譬如树木、房屋或汽车上的点, 即非地面点)进行有效的分离;二是从分离后的地面点中提取结构线, 用于建立高精度的数字地面模型. 作者发展了一系列的基于数字形态学理论和稳健参数估计理论的方法用于分离和探测地面点. 这里所介绍和开发的提取结构线的算法建立在数字图像处理和表面曲率理论的基础上. 这些算法同样可以扩展地用于其他领域. 所介绍的基于数字图像处理理论处理原始的航空激光扫瞄数据和提取结构线的方法取得了很好的结果. 这一结论可以在本文中通过一系列的插图得到有力的证明. 相似文献
8.
机载三线阵CCD摄影测量系统是GPS/INS与三线阵CCD相机联合工作的测量系统.通过GPS/INS给出的投影中心位置、视准轴姿态观测值及三线阵CCD像空间坐标,可以直接计算地面点在物空间的坐标.介绍了直接解算的几何模型,并依据共线方程建立地面点像空间坐标与控制点或同名点物空间坐标的关系,从而把问题归结为间接平差,给出了平差的误差方程.最后对直接解算模型进行了精度分析. 相似文献
9.
YOU Hongjian LIU Shaochuang LI Shukai 《地球空间信息科学学报》2001,4(3):62-67
1 IntroductionRemotesensinghasbeenappliedinmanyfieldsinthepastdecades ,butthemodetoacquireandpro cesstheremotesensingdatadoesnotchangeradi cally .Theremotesensingimagemustbegeo_refer encedthroughongroundcontrolpoints (GCPs) ,andstereomatchingmustbeappliedi… 相似文献
10.
11.
采用查找网点中心的方法,计算出任意加网图像的网点网格,按网格中网点的面积率来转换成灰度值,改变二值图属性,从而达到去网的目的。实验结果表明,去网效果与加网图像的分辨率、加网线数、加网角度等因素有关。使用此算法可以得到较满意的去网效果,可以合成出满足打样要求的彩色图像,用于RIP后图像的数字打样。 相似文献
12.
13.
基于激光扫描仪的点云模型的自动拼接 总被引:14,自引:0,他引:14
利用非接触式三维激光扫描仪对目标进行旋转扫描,获得目标的不同旋转位置的空间数据和数字影像,对相邻的两幅立体影像利用匹配方法寻找同名点,并映射到空间方,同时利用相对定向和空间相似变换分别剔除像方和空间方的粗差,以获得相邻两个坐标系准确的空间相似变换参数,根据空间相似变换参数将位于相邻的两个坐标系的空间点统一到同一个坐标系中去,完成三维数据的配准。 相似文献
14.
从激光扫描数据中进行建筑物特征提取研究 总被引:42,自引:4,他引:42
提出了一套基于建筑物几何特征的信息挖掘方案,并具体介绍了研究中采用的一些原理、方法与实用算法,从而可以直接从激光扫描数据中提取建筑物的平面外轮廓信息。利用本方案对车载激光扫描系统获取的城市建筑物试验数据进行了具体的处理,并给出了三维建模和可视化表达结果。 相似文献
15.
16.
A paper describing activities of the Laboratory of Remote Sensing Methods at Moscow University presents a chronology of the Laboratory's efforts to improve sensor capabilities for acquiring remote sensing data and to develop more effective image processing techniques. Among the accomplishments cited are early advances in sensor system design and photochemical processing in conjunction with “Salyut” orbital station activities, multispectral imaging experiments in conjunction with high-resolution space photography from the Soyuz-12 (1973) and Soyuz-22 (1976) missions, testing of the first high-resolution Soviet (“Fragment”) scanner imagery (1984), and ongoing work in digital and applied image processing. Translated from: Vestnik Moskovsskogo Universiteta, geografiya, 1987, No. 2, pp. 27-31. 相似文献
17.
18.
A methodology for the interpretation and mapping of lineaments and related geological features from medium-resolution, Meteor satellite scanner imagery is described. Special emphasis is placed on improving traditional methods of transferring information interpreted from remote sensing materials onto a cartographic base through compensation for the special character of geometric distortion on scanner imagery and selection of appropriate map projections for the cartographic base. This boils down to the development of computer models for correlating control points on a scanner image and map base, and algorithms for the plotting both of that base and the thematic image elements that are the focus of interest. Translated from: Vestnik Moskovskogo Universiteta, geografiya, 1986, No. 3, pp. 35–40. 相似文献
19.
Manuel A. Aguilar Fernando J. Aguilar Francisco Agüera 《The Photogrammetric Record》2005,20(112):335-350
Generating maps of small areas using conventional aerial photography is of great interest for small engineering firms. The main problem is the high cost of the sophisticated digital photogrammetric workstations usually employed. In this paper, a low-cost close range photogrammetric software package is used to measure the three-dimensional coordinates of points on the land surface from a photogrammetric flight at a scale of approximately 1:5000. Furthermore, the influence of the type of scanner used to digitise photographs (consumer-grade or photogrammetric scanner), the resolution of the digital images and the number of control points required are examined. The root mean square errors obtained at the check points, using a low-cost close range software package, scanning aerial images with a photogrammetric scanner and 24 ground control points, were around 116 mm for X and Y coordinates, and 191 mm for Z. These levels of accuracy allow the generation of planimetric maps at a scale of 1:1500 and topographic maps with a contour interval of around 1 m. When the images were scanned with a consumer-grade scanner, the root mean square errors were around 150 mm for X and Y, and 271 mm for Z. 相似文献
20.
Manfred Ehlers Monika Ghler Ronald Janowsky 《ISPRS Journal of Photogrammetry and Remote Sensing》2003,57(5-6):315
The advent of very high-resolution satellite programs and digital airborne cameras with ultra high resolution offers new possibilities for very accurate mapping of the environment. With these sensors of improved spatial resolution, however, the user community faces a new problem in the analysis of this type of image data. Standard classification techniques have to be augmented with appropriate analysis procedures because the required homogeneity of landuse/landcover classes can no longer be achieved by the integration effect of large pixel sizes (e.g., 20–80 m). New intelligent techniques will have to be developed that make use of multisensor approaches, geographic information system (GIS) integration and context-based interpretation schemes.The ideal goal should be that GIS ‘intelligence’ (e.g., object and analysis models) should be used to automate the classification process. In return, GIS objects can be extracted from a remote sensing image to update the GIS database. This paper presents the development of an automated procedure for biotope type mapping from ultra high-resolution airborne scanner data (HRSC-A). The hierarchical procedure incorporates a priori GIS information, a digital surface model (DSM) and multispectral image data. The results of this study will serve as a basis for a continuous environmental monitoring process in the tidally influenced region of the Elbe River, Germany. 相似文献