共查询到19条相似文献,搜索用时 218 毫秒
1.
本文详细地分析了强震加速度记录的数字化噪声。分析表明:数字化噪声由数字化设备的系统误差和操作者的随机读数误差迭加而成,随机数字化误差是具有各态历经性质的,其振幅按高斯规律分布的平稳随机过程,在其频谱组成中,长周期分量占明显的优势,因此将对二次积分加速度记录的位移曲线产生严重的影响。 研究表明:随机数字化噪声位移主要分布在周期大于25秒的频段,对加速度记录来说,分布在周期小于25秒的频段内,其随机噪声是相当小的(假定记录纸速为1厘米/秒)。因此,利用数字滤波技术,可以除去数字化加速度记录中的大部份随机数字化噪声。 作为实例,对一个典型的强震加速度记录进行了滤波,给出了低噪声的加速度记录和由此算出的位移曲线,且和未经滤波的相应记录及其位移进行了比较。 相似文献
2.
模拟地震记录波形数字化方法及软件设计 总被引:3,自引:0,他引:3
开发了利用扫描仪扫描地震记录图纸,对图像进行数字化的软件。该软件除具有一般地震波形数字化软件的功能外,还具有如下特点:对因超出扫描仪幅面而分块扫描的地震图像可自动拼接;对图像整体无级缩放或局部任意放大而不会失真;数字化后的波形与原始记录波形直接重叠比较,可大大提高数字化波形的速度和可靠率;自动修复限幅波形和自动进行弧形矫正。 相似文献
3.
4.
数字化地震记录分析软件PITSA简介及使用说明 总被引:1,自引:1,他引:1
JIN Changtai WANG Songyue SHENG Mingtao Changchun Institute of Applied Chemistry Academia Sinica Changchun 《地震地磁观测与研究》1997,18(4):1-90
“九五”期间我们将建立一批数字化地震台站,紧接着就是数字化记录的常规处理和数字化资料的开发利用问题。这两方面的工作都离不开数字化记录的常规处理软件。由国际地震学和地球内部物理学协会(IASPEI)和联合国科教文组织(UNESCO)以及美国地震学会(SSA)联合推荐的由F.ScherbaumandJ.Johnson完成的一套优秀的数字化分析处理软件PITSA(ProgrammableInteractiveToolboxforSeismologicalAnalysis)是一套比较适合我国广大地震工作者使用的软件。PITSA的特点是:①在普通微机(PC机)上安装使用,要求的微机和外部环境都很低,容易安装,占据的硬盘空间小(约2M)字节;②功能很强,如部分放大,震相拾取、求震级、定震中、分量旋转等常规分析工作它都能很好完成,进一步的分析处理工作如数值微分、积分、基线校正、谱分析、滤波、相关、Hilbert变换,旋转分量、偏振滤波、交义谱、相关谱、画质点运动图、各种模拟地震图的仿真等,它都能方便地实现;③它是菜单操作式软件,易学易用;④我们已有现成的软件,并已被一些地震工作者开发利用。鉴于以上优点,故我们特出版此专辑 相似文献
5.
用形变前兆台网及台站数据处理系统软件对易县地震台2002年度自记水管仪和伸缩仪的模拟记录和数字化记录资料进行处理,求得噪声水平、潮汐因子和误差,再计算出内在精度,从而在噪声水平和内在精度两个方面对模拟和数字化记录资料进行对比分析,从中发现数字化记录资料在内在精度和噪声水平两个方面均优于模拟记录资料. 相似文献
6.
7.
8.
本文通过短周期地震仪拾震器的频率特性测定误差,时间服务精度,系统线性记录误差分析,找出了上述误差产生的原因,并提出了解决办法,供从事测震台工作的同行参考。 相似文献
9.
地震前兆数据一直是地震分析预报必不可少的重要数据资源。随着辽宁省地震前兆台站数字化技术改造的开展,地震前兆模拟记录将逐步被数字化记录所取代。我们结合数字化技术改造的实际情况,采用先进的网络关系数据库模型构造了辽宁省数字地震前兆数据库。该数据库直接面向整个地震系统,为地震预报提供详实的数据服务和先进的研究手段。本文对数据库系统、数据库总体设计及数据共享服务也进行了深入研究和讨论。 相似文献
10.
依托前沿的软件开发技术和模块化的软件开发方法,采取Java Platform Enterprise Edition(Java EE)架构,按照MVC(模型-视图-控制器)设计模式的特点,设计了基于B/S(浏览器/服务器)模式的三层(表示层、业务逻辑层、持久层)地震记录处理软件框架,并运用Cewolf图形引擎、Struts框架、Java Bean技术、Hibernate框架实现了这一框架,以地震记录图形绘制和地震记录FFT变换及图形绘制两个实例,讲述了在此框架下地震记录处理方法的实现,展示了B/S模式地震记录处理软件的处理效果。 相似文献
11.
CBMD是一款针对CB-3模拟磁照图进行数字化处理的软件,利用专业图像处理技术,对模拟磁照图进行数字化,由于模拟仪器调试及存放因素造成了图纸状况不尽相同,使用者在数字化处理过程中,根据不同的图,纸采用相应的方法进行处理,才能保证数字化结果精确度.本文就主要的几种影响处理精度的情况展开讨论,并提出具体的解决方法. 相似文献
12.
介绍了图像处理技术在模拟磁照图数字化中的应用,使用该方法研制的CBMD软件通过二值化、细线化等关键图像处理技术对磁照图进行处理,最终实现模拟图纸的数字化。 相似文献
13.
电磁法数据处理的奇异值分解法 总被引:1,自引:0,他引:1
本文提出用奇异值分解方法处理电磁响应数据.根据电磁响应数据的奇异值分布特征,可以指出有用信号和随机误差所对应的奇异值范围.截断随机误差所对应的奇异值,利用与有用信号对应的特征象重构数据,可以消除随机误差.对加入随机噪声的理论数据处理的结果表明,这种方法的效果明显,随机噪声的标准差可降低60%多.另外,利用不同区段的特征象重构数据,可区分不同级次的电磁响应特征.最后,给出对实测数据处理的结果. 相似文献
14.
A large number of strong ground motions inGreece have been recorded by analogaccelerographs. The processing of analogstrong motion recordings and conversion toa digital form introduces noise in thesignal, due to the digitization andprocessing whichsignificantly affects the record. In thepresent paper a unified processing anddetermination of digitization andprocessing noise for the Greek strongmotion records is presented. Moreover,appropriate relations are proposed for thelower cut-off frequency with respect tothe epicentral distance and earthquakemagnitude for record filtering. 相似文献
15.
16.
J. Douglas 《Bulletin of Earthquake Engineering》2003,1(1):141-156
Some accelerograms are affected by non-standard recording and digitization problems that mean they are often not used in strong-motion
studies. These non-standard problems cannot be corrected by the standard processing techniques that remove low and high-frequency
noise from the time-history. Records from analogue instruments are more prone to these problems but even records from digital
instruments, which are becoming increasingly common, can be affected by such errors. Since all strong-motion data is valuable
it is important to know whether any useful information can be obtained from accelerograms that are affected by such problems.
This article examines whether strong-motion records from analogue instruments that are missing their initial part due to late
triggering of the instrument and also strong-motion records from digital instruments with low A/D converter resolution can
be used for response spectral studies. It is found, by simulating such errors on high-quality strong-motion records, that
good response spectral ordinates can be obtained from such `poor-quality' records within the period range of most engineering
interest.
This revised version was published online in July 2006 with corrections to the Cover Date. 相似文献
17.
Seismic data processing is a challenging task, especially when dealing with vector-valued datasets. These data are characterized by correlated components, where different levels of uncorrelated random noise corrupt each one of the components. Mitigating such noise while preserving the signal of interest is a primary goal in the seismic-processing workflow. The frequency-space deconvolution is a well-known linear prediction technique, which is commonly used for random noise suppression. This paper represents vector-field seismic data through quaternion arrays and shows how to mitigate random noise by proposing the extension of the frequency-space deconvolution to its hypercomplex version, the quaternion frequency-space deconvolution. It also shows how a widely linear prediction model exploits the correlation between data components of improper signals. The widely linear scheme, named widely-linear quaternion frequency-space deconvolution, produces longer prediction filters, which have enhanced signal preservation capabilities shown through synthetic and field vector-valued data examples. 相似文献
18.
19.
JANOS FISCHER 《水文科学杂志》2013,58(2):157-159
Abstract Digital mapping techniques are used increasingly in hydrology. One of the constraints on the application of those techniques is the digitizing process, which can be costly and time consuming. This paper describes the background and development of a low cost, easy-to-use system for digitizing maps, based on the use of a video camera as a scanner, and goes on to discuss the application of this system to the task of digitizing the hydrological soil maps of Europe. 相似文献