共查询到20条相似文献，搜索用时 78 毫秒
1.
2.
对地下地质构造进行正确成像是地震勘探的最终目的,由于三维地震资料采集不可能都沿垂直构造走向的方向进行,为地震资料的三维处理带来了许多困难. 本文将三维叠后拉东投影偏移思想应用于三维叠前处理中,提出了三维叠前投影偏移算法. 利用拉东投影变换的原理,将整个三维叠前数据体投影到一系列各方向的径向线上,各方位角的构造都包含在其中某条或多条径向剖面上. 投影完成后,形成一系列的独立的二维叠前测线,可采用二维叠前深度偏移成像方法来实现各径向线的叠前偏移,当各径向剖面偏移完成后,在时间切片上进行反投影,从而最终形成三维叠前深度偏移结果. 实际应用表明,用本方法进行三维叠前深度偏移时,深度偏移剖面对横向分辨率有所提高,对陡地层和小断层的成像效果有所改善. 相似文献
3.
The addition of a third dimension to seismic data acquisition offers significant improvement of our reflection images of geologic structures, but potentially at a substantial increase in data processing cost. Here we study an approach to migration of three-dimensional (3-D) stacked data that can considerably reduce the burden of computation and data manipulation. Cascading two-dimensional (2-D) migrations in orthogonal lateral directions, we obtain an efficient 3-D scheme that is exact for homogeneous media. As applied to examples of synthetic data from inhomogeneous media, the scheme introduces errors well below those attributable, in practice, to uncertainties in migration velocity. Application of this two-step approach, using both Kirchhoff-summation and finite-difference algorithms, to a 3-D seismic land survey over an area of known hydrocarbon traps additionally proves the importance of 3-D migration in stratigraphic imaging. 相似文献
4.
高密度空间采样地震数据特点分析 总被引：3，自引：0，他引：3
中国陆相沉积盆地的地质结构复杂,储层岩性的多变,需要有高精度的勘探方法。高密度空间采样是提高地震勘探精度的一项新技术。本文简要说明了点激发和点接收技术,分析高密度空间采样的野外工作方法,介绍了Gijs j．o．Vermeer提出的对称采样原理,从波场连续性的角度探讨了高密度空间采样技术。重点分析高密度空间采样数据的特点, 即:高密集的初至波有利于近地表结构的调查,可提高静校正的精度;小偏移距、小点距接收增加了浅层的有效覆盖次数,提高浅层反射的成像精度; 对规则噪声可实现无假频采样,室内的噪声分析和噪声压制的精度随着提高;高密度采集使波场连续性增强,使得各种数学变换的精度提高,有利于不同波场的分离。最后指出高密度空间采样地震勘探技术的难点在于室内数据处理,针对海量数据的分析和处理方法还需要进行深入细致的研究工作。 相似文献
5.
Zi-Shun Li 《应用地球物理》2012,9(3):286-292
To avoid spatial aliasing problems in broad band high resolution seismic sections, I present a high density migration processing solution. I first analyze the spatial aliasing definition for stack and migration seismic sections and point out the differences between the two. We recognize that migration sections more often show spatial aliasing than stacked sections. Second, from wave propagation theory, I know that migration output is a new spatial sampling process and seismic prestack time migration can provide the high density sampling to prevent spatial aliasing on high resolution migration sections. Using a 2D seismic forward modeling analysis, I have found that seismic spatial aliasing noise can be eliminated by high density spatial sampling in prestack migration. In a 3D seismic data study for Daqing Oilfield in the Songliao Basin, I have also found that seismic sections obtained by high-density spatial sampling (10 × 10 m) in prestack migration have less spatial aliasing noise than those obtained by conventional low density spatial sampling (20 × 40 m) in prestack migration. 相似文献
6.
李远钦 《CT理论与应用研究》1994,3(1):30-32
本文把Ｒａｄｏｎ变换公式推广到任意ｎ维的情况。同时结合ｎ维Ｒａｄｏｎ变换和摄动理论提出了一种既能用于地面资料又能用于ＶＳＰ资料的偏移方法。 相似文献
7.
地震勘探是寻找油气的重要手段之一.对于复杂构造地区,地震偏移成像成为地震资料处理流程中最重要的一环.由于叠前时间偏移尤其是Kirchhoff叠前时间偏移适应性强、计算效率高、成本低的自身特点,该方法在油气勘探中发挥着重要作用.对于该方法的成像精确性的研究有着重大的科研和工业价值.本文利用弯曲射线方法计算走时,加入保幅权函数,结合去假频技术、MPI并行技术,以SEG三维盐丘模型和某区域三维实际资料为研究对象,实现三维保幅弯曲射线Kirchhoff叠前时间偏移.将该方法偏移结果与传统的叠前时间偏移方法偏移结果进行对比分析,结果表明:本文采用的方法主要有以下两方面的优越性:第一,引入了弯曲射线计算走时,实现了弯曲射线叠前时间偏移,提高了成像的精确性;第二,引入了保幅权函数,实现了保幅叠前时间偏移,提高偏移结果的信噪比. 相似文献
8.
针对稀疏采样,特别是crossline方向稀疏采样的三维地震数据,提出了一个基于波动方程方法的陡角度构造深度偏移成像方法.文中针对一类混合域（空间和波数）的波动方程偏移方法展开研究.通过建立反假频的单程波算子和通过（形式上）填充空道重建理想采样的地震数据,有效地实现了陡倾角地层的准确成像.这一算法策略解决了波动方程偏移方法在实际应用中的一个关键问题,从而更好地发挥了波动方程偏移方法在复杂构造成像上的优势.二维理论数据（Marmousi模型）和三维实际地震资料成像结果表明本文方法是有效的.这一方法对现行的三维地震数据处理有重要的现实意义. 相似文献
9.
三维地震勘探在十年内取得了显著的地质效果和经济效益。三维地震数据处理技术也得到了迅速的发展。但是,与二维相比,三维地震数据处理技术有许多不完善之处。本文对其中几个主要问题进行分析并提出解决方法。这些问题是三维叠加速度分析、三维静校正和叠前三维偏移等处理方法。 相似文献
10.
Abstract The complex crustal geology of convergent zones requires carefully planned seismic experiments for accurate imaging. Situations that require 2-D or 3-D experiments, pre-stack or post-stack processing, and time or depth migration, are discussed. Some of the advanced techniques available for seismic processing are described. Some results of 3-D post-stack depth migration of a 3-D data set on the Barbados margin that were obtained by the University of Texas Institute of Geophysics and reprocessed at the Houston Advanced Research Center illustrate the advantage of three-dimensionality, and the value of advanced processing techniques. 相似文献
11.
Three‐dimensional seismic survey design should provide an acquisition geometry that enables imaging and amplitude‐versus‐offset applications of target reflectors with sufficient data quality under given economical and operational constraints. However, in land or shallow‐water environments, surface waves are often dominant in the seismic data. The effectiveness of surface‐wave separation or attenuation significantly affects the quality of the final result. Therefore, the need for surface‐wave attenuation imposes additional constraints on the acquisition geometry. Recently, we have proposed a method for surface‐wave attenuation that can better deal with aliased seismic data than classic methods such as slowness/velocity‐based filtering. Here, we investigate how surface‐wave attenuation affects the selection of survey parameters and the resulting data quality. To quantify the latter, we introduce a measure that represents the estimated signal‐to‐noise ratio between the desired subsurface signal and the surface waves that are deemed to be noise. In a case study, we applied surface‐wave attenuation and signal‐to‐noise ratio estimation to several data sets with different survey parameters. The spatial sampling intervals of the basic subset are the survey parameters that affect the performance of surface‐wave attenuation methods the most. Finer spatial sampling will reduce aliasing and make surface‐wave attenuation easier, resulting in better data quality until no further improvement is obtained. We observed this behaviour as a main trend that levels off at increasingly denser sampling. With our method, this trend curve lies at a considerably higher signal‐to‐noise ratio than with a classic filtering method. This means that we can obtain a much better data quality for given survey effort or the same data quality as with a conventional method at a lower cost. 相似文献
12.
提出了一种基于波动理论的三维合成震源记录叠前深度偏移方法,该方法不含任何物理假设,利用波动方程算子的3个性质,合成炮震源及炮震源记录,将面炮记录合成与相位编码合成两种方法在理论上和计算上合二为一,成为一个统一的合成理论. 通过双重叠加把三维叠前五维数据转换为三维数据,既保证了成像质量同炮记录偏移成像一样精确,又显著地提高了计算效率,且适于复杂地质构造成像. 针对不同情况,给出了几种不同的合成算子,使方法在实际应用中有较大的灵活性和选择性. 基于MPI并行算法的实现,进一步提高了计算效率. SEG＼EAGE盐丘C3_NA数据模型上的试算结果和新疆三维起伏地表实际地震资料的处理结果进一步说明了该方法的有效性和实用性. 相似文献
13.
14.
Cadzow filtering is currently considered as one of the most effective approaches for seismic data reconstruction. The basic version of Cadzow filtering first reorders each frequency slice of the seismic data (to be reconstructed) to a block Hankel/Toeplitz matrix, and then implements a rank-reduction operator, that is truncated singular value decomposition, to the Hankel/Toeplitz matrix. However, basic Cadzow filtering cannot deal with the problem of recovering regularly missing data (up-sampling) in the case of strongly aliased energy, because the regularly missing data will mix with signals in the singular spectrum. To solve this problem, it has been proposed to precondition the reconstruction of high-frequency components using information from the low-frequency components which are less aliased. In this paper, we further extend the de-aliased Cadzow filtering approach to reconstruct regularly sampled seismic traces from the noisy observed data by modifying the reinserting operation, in which the high-frequency components are projected onto the sub-space spanned by several singular vectors of the low-frequency components. At each iteration, the filtered data are weighted to the original data as a feedback. The weighting factor is related to the background noise level and changes with iteration. The feasibility of the proposed technique is validated via two-dimensional, three-dimensional and five-dimensional synthetic data examples, as well as two-dimensional post-stack and three-dimensional pre-stack field data examples. The results demonstrate that the proposed technique can effectively interpolate regularly sampled data and is robust in noisy environments. 相似文献
15.
Amplitude versus offset information is a key feature to seismic reservoir characterization. Therefore amplitude preserving migration was developed to obtain this information from seismic reflection data. For complex 3-D media, however, this process is computationally expensive. In this paper we present an efficient traveltime based strategy for amplitude preserving migration of the Kirchhoff type. Its foundations are the generation of traveltime tables using a wavefront-oriented ray-tracing technique, and a generalized moveout relation for 3-D heterogeneous media. All required quantities for the amplitude preserving migration are computed from coarsely gridded traveltime tables. The migration includes the interpolation from the coarsely gridded input traveltimes onto the fine migration grid, the computation of amplitude preserving weight functions, and, optionally, the evaluation of an optimized migration aperture. Since ray tracing is employed for the traveltime computation the input velocity model needs to be smooth, i.e. velocity variations of spatial dimensions below the wavelength of the considered reflection signals are removed. Numerical examples on simple generic models validate the technique and an application to the Marmousi model demonstrates its potential to complex media. The major advantage of the traveltime based strategy consists of its computational efficiency by maintaining sufficient accuracy. Considerable savings in storage space (105 and more for 3-D data with respect to no interpolation at all) can be achieved. The computational time for the stack can be substantially reduced (up to 90% in 3-D) with the optimized migration aperture since only those traces are stacked which really contribute to the image point under consideration. 相似文献
16.
非规则采样快速傅里叶变换（NFFT）主要用于快速计算非规则采样数据的频谱及重建.该方法为非规则采样数据频谱重建技术的核心算法.在实现NFFT算法时,高速度和高精度计算是其应用的前提和关键.本文针对二维NFFT计算效率,应用表驱动思路进行改进,将Gauss褶积算子由矩形改进为椭圆以减少计算量,将e指数计算改进为乘法以加快计算速度,并建表解决NFFT算法在地震资料处理中的应用问题.本文同时给出了非规则采样地震数据NFFT谱重建方法.最后本文给出算例验证提出方法的计算速度和精度,和非规则采样地震资料重建结果. 相似文献
17.
反射地震勘探中的偏移成像技术是获取地下介质构造形态最有效的手段之一.在叠前深度域偏移方法中,目前工业界采用的方法包括基于射线理论的波动方程积分解法和基于波动理论的微分波动方程单程波解法,这两类方法难以处理地震波横向速度变化剧烈的高陡倾角构造成像问题.近年来勘探地震学研究领域发展起来的叠前逆时偏移采用了双程波求解微分波动方程的算法,这种方法具有相位准确、不受介质横向速度变化和高陡倾角构造的影响、成像精度高、可以利用回转波正确成像等优点,从理论上弥补了当前工业界常规地震偏移所面临的成像缺陷.然而,叠前逆时偏移成像方法从理论走向实用尚需解决如下问题:计算速度和数据存储空间的节省、初始速度模型的建立、震源子波的选择、数值模型边界条件的定义和假像的消除等等.对于计算速度和存储量大的问题,随着计算机硬件的快速发展,将会不断得到改善,同时可以采取一些计算技术和存储策略来加以缓解.本文主要针对初始速度模型的建立、震源子波的选择、数值模型边界条件的定义和假像的消除这些因素,利用简单模型进行了分析.对于反射波造成的传播路径上的假像,给出了一种振幅补偿滤波方法.对勘探地球物理学界给出的SEG/EAGE二维盐丘模型、Marmousi模型和本研究设计的崎岖海底模型进行了叠前逆时偏移成像,均取得了较好的成像效果. 相似文献
18.
19.
常规三维观测系统设计的主要目的是得到规则采样的叠加数据体,能够用叠后偏移进行成像.叠前偏移成像对地震观测系统提出了更高的要求.基于叠前成像的要求设计观测系统,对于充分发挥叠前偏移技术优势、提高地震成像精度具有重要意义.本文提出了基于叠前成像的观测系统设计方法,首先基于叠前偏移空间采样准则设计观测系统的基本空间采样,然后根据采样均匀和面元属性一致性原则设计观测系统布局,并利用聚焦束、散射点叠前偏移响应、正演模型和波场照明等技术对观测系统逐步优化,得到符合叠前偏移成像要求并能解决地质问题的观测系统.该方法在中原油田近年来的高精度地震勘探中得到了实际应用,取得了良好效果. 相似文献
20.
Virgil Bardan 《Geophysical Prospecting》1997,45(5):819-830
3D seismic data are usually recorded and processed on rectangular grids, for which sampling requirements are generally derived from the usual 1D viewpoint. For a 3D data set, the band region (the region of the Fourier space in which the amplitude spectrum is not zero) can be approximated by a domain bounded by two cones. Considering the particular shape of this band region we can use the 3D sampling viewpoint, which leads to weaker sampling requirements than does the 1D viewpoint; i.e. fewer sample points are needed to represent data with the same degree of accuracy. The 3D sampling viewpoint considers regular nonrectangular sampling grids. The recording and processing of 3D seismic data on a hexagonal sampling grid is explored. The acquisition of 3D seismic data on a hexagonal sampling grid is an advantageous economic alternative because it requires 13.4% fewer sample points than a rectangular sampling grid. The hexagonal sampling offers savings in data storage and processing of 3D seismic data. A fast algorithm for 3D discrete spectrum evaluation and trace interpolation in the case of a 3D seismic data set sampled on a hexagonal grid is presented and illustrated by synthetic examples. It is shown that by using this algorithm the hexagonal sampling offers, approximately, the same advantage of saving 13.4% in data storage and computational time for 3D phase-shift migration. 相似文献