共查询到20条相似文献，搜索用时 78 毫秒
1.
We derive a governing second-order acoustic wave equation in the time domain with a perfectly matched layer absorbing boundary condition for general inhomogeneous media. Besides, a new scheme to solve the perfectly matched layer equation for absorbing reflections from the model boundaries based on the rapid expansion method is proposed. The suggested scheme can be easily applied to a wide class of wave equations and numerical methods for seismic modelling. The absorbing boundary condition method is formulated based on the split perfectly matched layer method and we employ the rapid expansion method to solve the derived new perfectly matched layer equation. The use of the rapid expansion method allows us to extrapolate wavefields with a time step larger than the ones commonly used by traditional finite-difference schemes in a stable way and free of dispersion noise. Furthermore, in order to demonstrate the efficiency and applicability of the proposed perfectly matched layer scheme, numerical modelling examples are also presented. The numerical results obtained with the put forward perfectly matched layer scheme are compared with results from traditional attenuation absorbing boundary conditions and enlarged models as well. The analysis of the numerical results indicates that the proposed perfectly matched layer scheme is significantly effective and more efficient in absorbing spurious reflections from the model boundaries. 相似文献
2.
DAN KOSLOFF ANIBAL QUEIROZ FILHO EKKEHART TESSMER ALFRED BEHLE 《Geophysical Prospecting》1989,37(4):383-394
We present a new rapid expansion method (REM) for the time integration of the acoustic wave equation and the equations of dynamic elasticity in two spatial dimensions. The method is applicable to spatial grid methods such as finite differences, finite elements or the Fourier method. It is based on a Chebyshev expansion of the formal solution to the appropriate wave equation written in operator form. The method yields machine accuracy yet it is faster than methods based on temporal differencing. Its disadvantages are that it does not apply to all types of material rheology, and it can also require much storage when many snapshots and time sections are desired. Comparisons between numerical and analytical solutions for simple acoustic and elastic problems demonstrate the high accuracy of the REM. 相似文献
3.
It is important to include the viscous effect in seismic numerical modelling and seismic migration due to the ubiquitous viscosity in an actual subsurface medium. Prestack reverse‐time migration (RTM) is currently one of the most accurate methods for seismic imaging. One of the key steps of RTM is wavefield forward and backward extrapolation and how to solve the wave equation fast and accurately is the essence of this process. In this paper, we apply the time‐space domain dispersion‐relation‐based finite‐difference (FD) method for visco‐acoustic wave numerical modelling. Dispersion analysis and numerical modelling results demonstrate that the time‐space domain FD method has great accuracy and can effectively suppress numerical dispersion. Also, we use the time‐space domain FD method to solve the visco‐acoustic wave equation in wavefield extrapolation of RTM and apply the source‐normalized cross‐correlation imaging condition in migration. Improved imaging has been obtained in both synthetic and real data tests. The migration result of the visco‐acoustic wave RTM is clearer and more accurate than that of acoustic wave RTM. In addition, in the process of wavefield forward and backward extrapolation, we adopt adaptive variable‐length spatial operators to compute spatial derivatives to significantly decrease computing costs without reducing the accuracy of the numerical solution. 相似文献
4.
David Jacqmin 《Pure and Applied Geophysics》1985,123(3):441-447
This note examines the accuracy of finite difference solutions of the midlatitude primitive equations and the quasi-geostrophic equation. First order accurate forward differencing of the equations' lower boundary condition is shown to poorly simulate the radiating wave response to midlatitude heating. Forward differencing always exaggerates the magnitude of the radiating response. For a realistic heating height scale and for a reasonable mesh size this exaggeration is on the order of 50%. Central differencing of the lower boundary condition gives an error of only about 3%.Center for Earth and Planetary Physics, Harvard University 相似文献
5.
三维声波方程相比二维声波方程能够更好的模拟三维空间的地震波传播,模拟标量近似下的弹性波在三维复杂介质的传播过程.基于非规则网格的正演模拟方法的格子法可以处理很好的刻画起伏地表、速度间断面等复杂构造,但是这类方法需要大量的几何描述来描述网格.本文提出了三维六面体双重网格的格子法来模拟声波方程,一方面该方法继承了格子法能够灵活处理自由表面和速度间断面的特性.另一方面,该方法通过双重网格的实现极大的减少了几何描述文件的大小,可以最大的实现GPU加速,实现粗粒度并行,在节省了几何描述空间的同时达到了很高的加速比. 相似文献
6.
When treating the forward full waveform case, a fast and accurate algorithm for modelling seismic wave propagation in anisotropic inhomogeneous media is of considerable value in current exploration seismology. Synthetic seismograms were computed for P-SV wave propagation in transversely isotropic media. Among the various techniques available for seismic modelling, the finite-difference method possesses both the power and flexibility to model wave propagation accurately in anisotropic inhomogeneous media bounded by irregular interfaces. We have developed a fast high-order vectorized finite-difference algorithm adapted for the vector supercomputer. The algorithm is based on the fourth-order accurate MacCormack-type splitting scheme. Solving the equivalent first-order hyperbolic system of equations, instead of the second-order wave equation, avoids computation of the spatial derivatives of the medium's anisotropic elastic parameters. Examples indicate that anisotropy plays an important role in modelling the kinematic and the dynamic properties of the wave propagation and should be taken into account when necessary. 相似文献
7.
A new wave equation is derived for modelling viscoacoustic wave propagation in transversely isotropic media under acoustic transverse isotropy approximation. The formulas expressed by fractional Laplacian operators can well model the constant-Q (i.e. frequency-independent quality factor) attenuation, anisotropic attenuation, decoupled amplitude loss and velocity dispersion behaviours. The proposed viscoacoustic anisotropic equation can keep consistent velocity and attenuation anisotropy effects with that of qP-wave in the constant-Q viscoelastic anisotropic theory. For numerical simulations, the staggered-grid pseudo-spectral method is implemented to solve the velocity–stress formulation of wave equation in the time domain. The constant fractional-order Laplacian approximation method is used to cope with spatial variable-order fractional Laplacians for efficient modelling in heterogeneous velocity and Q media. Simulation results for a homogeneous model show the decoupling of velocity dispersion and amplitude loss effects of the constant-Q equation, and illustrate the influence of anisotropic attenuation on seismic wavefields. The modelling example of a layered model illustrates the accuracy of the constant fractional-order Laplacian approximation method. Finally, the Hess vertical transversely isotropic model is used to validate the applicability of the formulation and algorithm for heterogeneous media. 相似文献
8.
Travel time computations using a compact eikonal equation for vertical transverse isotropic media 
下载免费PDF全文
下载免费PDF全文 Eikonal solvers often have stability problems if the velocity model is mildly heterogeneous. We derive a stable and compact form of the eikonal equation for P‐wave propagation in vertical transverse isotropic media. The obtained formulation is more compact than other formulations and therefore computationally attractive. We implemented ray shooting for this new equation through a Hamiltonian formalism. Ray tracing based on this new equation is tested on both simple as well as more realistic mildly heterogeneous velocity models. We show through examples that the new equation gives travel times that coincide with the travel time picks from wave equation modelling for anisotropic wave propagation. 相似文献
9.
Reverse-time migration (RTM) directly solves the two-way wave equation for wavefield propagation; therefore, how to solve the wave equation accurately and quickly is very important for RTM. The conventional staggered-grid finite-difference (SFD) operators are usually based on the Taylor-series expansion theory. If they are used to solve wave equation on a larger frequency content, a strong dispersion will occur, which directly affects the seismic image quality. In this paper, we propose an optimal SFD operator based on least squares to solve acoustic wave equation for prestack RTM, and obtain a new antidispersion RTM algorithm that can use short spatial difference operators. The synthetic and real data tests demonstrate that the least squares SFD (LSSFD) operator can mitigate the numerical dispersion, and the acoustic RTM using the LSSFD operator can effectively improve image quality comparing with that using the Taylor-series expansion SFD (TESFD) operator. Moreover, the LSSFD method can adopt a shorter spatial difference operator to reduce the computing cost. 相似文献
10.
基于双二次插值的探地雷达有限元数值模拟 总被引：3，自引：0，他引：3
从探地雷达(GPR)满足的波动方程出发,详细介绍了二维GPR模型单元剖分、二次插值、数值积分和有限元刚度矩阵总体合成的GPR有限元求解过程.为解决数值模拟时截断边界处的超强反射,采用Clay Bout透射边界条件对雷达波进行衰减,进而压制了来自截断边界处的反射波.在满足时间步长与空间网格差分稳定性前提下,采用中心差分法对GPR有限元方程进行离散,并用不完全LU分解预处理的BICGSTAB算法求解系数方程组,然后编制了基于双二次插值的GPR有限元正演模拟matlab程序.运用该程序分别对矩形和"V"字形两个典型地电模型进行正演计算,得到了正演剖面图,将该正演剖面图与基于线性插值的FEM算法的正演剖面图做了对比分析.结果表明基于双二次插值FEM算法相比基于双线性插值FEM算法异常响应更明显,具有更高的模拟精度,更有利于指导雷达剖面的数据解译. 相似文献
11.
利用地震波正向传播方程对属于波形线性反演问题近似求解方法的地震数据偏移成像进行重新推导,得到了适合散射地震数据的散射偏移成像方法和适合反射地震数据的反射偏移成像方法.以地震波传播的散射理论为出发点,首先根据描述一次散射波正向传播的线性方程研究建立散射地震数据的偏移成像方法理论;利用高频近似对产生散射波场的地下速度扰动函数的空间变化进行近似,推导出地下反射率函数,再由散射波传播方程推导出基于反射率函数的反射波传播方程,然后根据描述一次反射波正向传播的线性方程研究建立反射地震数据的偏移成像方法理论.本文指出和修正了Claerbout偏移成像方法中的不足,提出的地震数据偏移成像方法是对当前偏移成像方法理论的完善,使反射地震数据偏移成像具有了更坚实的数学物理理论基础,得到的偏移成像结果相位正确、位置准确、分辨率提高. 相似文献
12.
利用传统有限差分方法对基于Biot理论的双相介质波动方程进行数值求解时,由于慢纵波的存在,数值频散效应较为明显,影响模拟精度.相对于声学近似方程及普通弹性波方程,Biot双相介质波动方程在同等数值求解算法和精度要求条件下,其地震波场正演模拟需要更多的计算时间.本文针对Biot一阶速度-应力方程组发展了一种变阶数优化有限差分数值模拟方法,旨在同时提高其正演模拟的精度和效率.首先结合交错网格差分格式推导Biot方程的数值频散关系式.然后基于Remez迭代算法求取一阶空间偏导数的优化差分系数,并用于Biot方程的交错网格有限差分数值模拟.在此基础上把三类波的平均频散误差参数限制在给定的频散误差阈值和频率范围内,此时优化有限差分算子的长度就能自适应非均匀双相介质模型中的不同速度区间.数值频散曲线分析表明:基于Remez迭代算法的优化有限差分方法相较传统泰勒级数展开方法在大波数范围对频散误差的压制效果更明显;可变阶数的优化有限差分方法能取得与固定阶数优化有限差分方法相近的模拟精度.在均匀介质和河道模型的数值模拟实验中将本文变阶数优化有限差分算法与传统泰勒展开算法、最小二乘优化算法进行比较,进一步证明其在复杂地下介质中的有效性和适用性. 相似文献
13.
14.
The Fourier spectral method and high-order differencing have both been shown to be very accurate in computing spatial derivatives of the acoustic wave equation, requiring only two and three gridpoints per shortest wavelength respectively. In some cases, however, there is a lack of flexibility as both methods use a uniform grid. If these methods are applied to structures with high vertical velocity contrasts, very often most of the model is oversampled. If a complicated interface has to be covered by a fine grid for exact representation, both methods become less attractive as the homogeneous regions are sampled more finely than necessary. In order avoid this limitation we present a differencing scheme in which the grid spacings can be extended or reduced by any integer factor at a given depth. This scheme adds more flexibility and efficiency to the acoustic modelling as the grid spacings can be changed according to the material properties and the model geometry. The time integration is carried out by the rapid expansion method. The spatial derivatives are computed using either the Fourier method or a high-order finite-difference operator in the x-direction and a modified high-order finite-difference operator in the z-direction. This combination leads to a very accurate and efficient modelling scheme. The only additional computation required is the interpolation of the pressure in a strip of the computational mesh where the grid spacing changes. 相似文献
15.
A convection-diffusion equation arises from the conservation equations in miscible and immiscible flooding, thermal recovery, and water movement through desiccated soil. When the convection term dominates the diffusion term, the equations are very difficult to solve numerically. Owing to the hyperbolic character assumed for dominating convection, inaccurate, oscillating solutions result. A new solution technique minimizes the oscillations. The differential equation is transformed into a moving coordinate system which eliminates the convection term but makes the boundary location change in time. We illustrate the new method on two one-dimensional problems: the linear convection-diffusion equation and a non-linear diffusion type equation governing water movement through desiccated soil. Transforming the linear convection diffusion equation into a moving coordinate system gives a diffusion equation with time dependent boundary conditions. We apply orthogonal collocation on finite elements with a Crank-Nicholson time discretization. Comparisons are made to schemes using fixed coordinate systems. The equation describing movement of water in dry soil is a highly non-linear diffusion-type equation with coefficients varying over six orders of magnitude. We solve the equation in a coordinate system moving with a time-dependent velocity, which is determined by the location of the largest gradient of the solution. The finite difference technique with a variable grid size is applied, and a modified Crank-Nicholson technique is used for the temporal discretization. Comparisons are made to an exact solution obtained by similarity transformation, and with an ordinary finite difference scheme on a fixed coordinate system. 相似文献
16.
17.
本文以河南泌阳凹陷为例,从散射波波动方程正演着手,分析大断面地震波散射场的物理机制和特点,结合叠前偏移处理需要进行观测系统论证。采集上主要运用模型约束正演技术优选采集参数,并采取了主要解决山前激发能量问题的技术措施;资料处理上主要应用了基于精细速度建模的叠前深度偏移成像处理方法;解释上通过可视化构造成图分析陡坡砂砾岩体的分布规律和发育期次,并运用沟扇对应理论,结合地震相分析、层拉平水平切片分析、属性分析等方法,预测砂砾岩体分布区带和层位。部署探井并取得了成功,相继在凹陷南部陡坡带发现了两个富集含油区块。 相似文献
18.
波动方程数值模拟方法是研究地震波场传播的一种重要手段,本文采用交错网格高阶有限差分方法分别对双程声波方程和双程弹性波方程进行了波场数值模拟,并且根据定位原理采用傅立叶有限差分算子进行了单程波方程数值模拟,在分析定位原理的基础上,对其计算过程稍作修改,将延拓到地面的波场直接由每个检波点接收,无需横向叠加过程,得到了单程声波方程共炮记录.基于不同波动方程的数值模拟结果表明,双程波方程结果包含直达波、多次波等干扰波,信噪比低;单程波数值模拟结果只包含了介质分界面的一次反射波,信噪比高,但对于大角度入射波误差较大,并且对于同一个地质模型而言,双程弹性波方程计算速度最慢,双程声波方程次之,单程声波方程计算速度最快.因此对于复杂地质模型,三种模拟方法可以取长补短,综合应用. 相似文献
19.
The Fourier pseudospectral method has been widely accepted for seismic forward modelling because of its high accuracy compared to other numerical techniques. Conventionally, the modelling is performed on Cartesian grids. This means that curved interfaces are represented in a ‘staircase fashion‘causing spurious diffractions. It is the aim of this work to eliminate these non-physical diffractions by using curved grids that generally follow the interfaces. A further advantage of using curved grids is that the local grid density can be adjusted according to the velocity of the individual layers, i.e. the overall grid density is not restricted by the lowest velocity in the subsurface. This means that considerable savings in computer storage can be obtained and thus larger computational models can be handled. One of the major problems in using the curved grid approach has been the generation of a suitable grid that fits all the interfaces. However, as a new approach, we adopt techniques originally developed for computational fluid dynamics (CFD) applications. This allows us to put the curved grid technique into a general framework, enabling the grid to follow all interfaces. In principle, a separate grid is generated for each geological layer, patching the grid lines across the interfaces to obtain a globally continuous grid (the so-called multiblock strategy). The curved grid is taken to constitute a generalised curvilinear coordinate system, where each grid line corresponds to a constant value of one of the curvilinear coordinates. That means that the forward modelling equations have to be written in curvilinear coordinates, resulting in additional terms in the equations. However, the subsurface geometry is much simpler in the curvilinear space. The advantages of the curved grid technique are demonstrated for the 2D acoustic wave equation. This includes a verification of the method against an analytic reference solution for wedge diffraction and a comparison with the pseudospectral method on Cartesian grids. The results demonstrate that high accuracies are obtained with few grid points and without extra computational costs as compared with Cartesian methods. 相似文献
20.
本文介绍一种基于τ-P变换的新的叠后深度偏移方法。这一方法是在均匀介质条件下根据波动方程推导出的。其基本思想是:在τ-p域中,当波场分解为它的平面波成分时,改变其τ、p值,再通过τ-p反变换回到深度域中,从而完成了地下界面的偏移归位。 方法所需的计算时间基本是与完成τ-p正、反变换所需时间相同,是一种快速的偏移方法。它可用于任意形状的地下界面,甚至在强干扰背景的条件下,也能提高资料的信噪比和改善信号的连续性。这一方法是在深度域中进行τ-p变换,故它能适应速度存在纵、横变化的地区。为了论证本方法的效果,本文给出了不同的正演理论模型和偏移结果的例子。 相似文献