首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 952 毫秒
1.
东海重磁地震综合探测剖面研究   总被引:24,自引:8,他引:16       下载免费PDF全文
依据东海南部一条自东海陆架直至菲律宾海盆的重磁地震综合探测剖面,采用地壳结构重磁地震综合反演解释系统开展岩石圈结构的综合研究,制作了岩石圈结构地学断面图. 结果表明基隆凹陷为一中新生代沉积凹陷,沉积厚度达到14km;冲绳海槽盆地为弧后扩张地堑型盆地,地壳厚度仅为14.5km;菲律宾板块沿北西西方向向欧亚板块俯冲,莫霍面急剧下插,导致冲绳海槽的形成与发展;岩石圈厚度约为80km,但在370km处仅为53km,在450km至540km处岩石圈厚度大于100km.  相似文献   

2.
渤海残留盆地分布综合地球物理研究   总被引:13,自引:3,他引:10       下载免费PDF全文
以活动论构造历史观为指导进行渤海海域残留盆地宏观分布特征研究. 以岩石物性为基础建立地质界面与物性界面的联系,通过重、磁、震等方法组合圈画不同物性界面的分布特征. 浅层沉积盆地结构通过反射地震资料控制,深层地质结构信息利用重磁异常场分离、物性界面反演等方法得到. 在地层分布格架基础上分析前新生代残留盆地宏观分布范围. 并结合渤海海域实例研究介绍了残留盆地宏观分布研究的技术方法和流程,在计算上古生界-中生界及元古界-下古生界残余地层厚度的基础上给出了渤海海域残留盆地的宏观分布范围,并指出在歧口凹陷东南部、石臼坨隆起南部及东北部、渤南凸起南部、辽东湾等地区是较好的前新生代油气潜力区.  相似文献   

3.
基于重磁震资料的南海新生代盆地分布综合研究   总被引:3,自引:1,他引:2       下载免费PDF全文
作为西太平洋最大的边缘海,南海分布有30多个新生代沉积盆地,其蕴含着丰富的油气资源.但由于资料的限制,南海存在不同区域盆地研究程度不同,不同区域盆地面积差别较大,部分盆地只是坳陷而没有达到盆地的级别以及盆地外围可能存在凹陷等问题.南海新生代盆地分布问题制约了其油气分布规律、储量等基础地质问题的研究.本文以地震剖面数据为约束,以重力资料为主、辅以磁力资料,研究了南海新生代盆地分布及构造区划.通过提取新生代盆地及其构造单元引起的重力异常,结合地震剖面等资料反演了新生界底界面深度及新生界厚度.在充分调研已有盆地和构造单元划分方案的基础上,根据南海的地质及地球物理特征,确定了盆地及构造单元划分标准.以新生界厚度为基础并结合重、磁、震、地质等资料,进行地质-重磁震联合解释,将南海原有的36个盆地重新划分为24个盆地,盆地总面积扩大了约15万km2.研究表明,南海新生代盆地沉积层厚度在1.5~16 km之间,有6个北东东/北东向沉积坳陷带、2个近南北向沉积坳陷带以及1个三角沉积坳陷区;盆地展布方向主要为北东和北东东向,其次为北西和近南北向,呈现"南三北三"的分布特征.  相似文献   

4.
南北地震带南段地壳厚度重震联合最优化反演   总被引:2,自引:0,他引:2       下载免费PDF全文
陈石  郑秋月  徐伟民 《地球物理学报》2015,58(11):3941-3951
重力反演方法是研究地壳结构和物性界面起伏的有效地球物理手段之一.本文收集了南北地震带南段67个已有的固定台站接收函数反演的Moho面深度结果,并使用基于EGM2008重力异常模型计算的布格重力异常,验证了本文提出的重震联合密度界面反演方法的有效性.利用接收函数对台站下方Moho面深度估计作为先验约束,定义了一类评价函数,通过对重力反演算法中尺度因子,平移因子和稳定性因子的最优选择,最小化重力反演结果与接收函数模型之间的差异.结果表明,本文提出的方法,可以有效地同化不同地球物理方法获得的反演模型,且通过重震联合反演可以改进由于对空间分布不均匀的接收函数结果插值可能而引起的误差.本文还通过引入Crust1.0的Moho面深度为初值,同时考虑地壳密度的横向不均匀分布,通过模型之间的联合反演有效改善了地球物理反演模型间的不一致性问题.本文反演得到的最优化Moho面深度模型与已知67个台站位置接收函数模型之间的标准差约1.9km,小于Crust1.0与接收函数结果模型之间标准差为3.73km的统计结果.本文研究结果对于同化重震反演结果、精化地壳密度界面模型,都具有十分重要的参考意义.  相似文献   

5.
基于物性参数耦合的多地球物理数据联合反演方法是21世纪初发展起来的新技术,速度-密度耦合约束下的重震联合反演是其重要分支之一.相比于传统的重震资料综合解释,基于速度-密度耦合的重震联合反演能够减少主观因素的干扰,发挥地震和重力数据的互补作用,产生精度和一致性更高的速度-密度模型.结合国内外现状,本文较为全面地介绍了现有的速度-密度耦合方式,并讨论了速度-密度耦合约束下重震联合反演策略和目标函数的构建及求解等相关问题.不同反演策略和耦合方式的适用性不同,没有绝对的优劣之分.根据研究区的实际情况,在合适的速度-密度耦合约束下开展重震联合反演研究和应用是下一步工作的重点.  相似文献   

6.
伊犁盆地中部区域地处多个构造单元的交汇区,构造复杂,缺乏高精度地质资料,制约了对盆地构造演化的进一步认识.本文联合使用多种先验信息作为约束条件,利用高精度重磁数据反演获得了研究区地下海拔-10 km以浅的三维密度和磁性结构,增强了反演结果的可靠性.结果揭示以白石墩次凸为中心发育了一个"北断南超"的南西-北东向不对称型凹陷,北部沉积厚度大于南部;区内主要断裂具有高角度特征,生烃中心受断裂控制,阿吾拉勒山前凹陷浅部可能发育逆掩断裂;火成岩以侵入的基性火成岩为主,伴有部分喷出火成岩和中酸性火成岩.  相似文献   

7.
综合地球物理解释与盆地模拟系统研究   总被引:4,自引:1,他引:4       下载免费PDF全文
以板块大地构造理论为指导,将沉积盆地看作一个地球动力学系统,建立综合地球物理解释与动态模拟工作站.应用重磁、电法及地震与测井资料对盆地进行整体性综合研究,探讨其形成演化历史,并根据不同勘探阶段提供的地质、地球物理和地球化学资料,对盆地的沉降史、热史、生烃史和运聚史进行动态模拟.用此系统研究了东海陆架盆地的地球物理场特征,对其沉降史、热史进行了模拟;探讨了东海盆地油气远景.  相似文献   

8.
东海陆架盆地及其周边海域地质、地球物理场特征   总被引:7,自引:5,他引:7  
分东海陆架盆地及其周边海域的重、磁场特征、对研究区域的地球物理场资料进行了小波变换与多尺度分布与计算,计算了研究了海域重,磁资料的1-4阶小波变换逼近、细节、根据分析与计算可知,在东海陆架盆地及其周边域,重、磁异常的主要特征没有内陆盆地那样明显,但盆地内的绝大部分地区均位于异常相对缓变区,在盆地内部有时有局部异常的圈闭及剧变区,但总的特征为缓变的,而周边区域多为相对剧变区,但也存在局部区域的缓变, 、磁场特征表明,盆地基底相对盆地周边区域主要由密度较大,磁性中的岩石组成,因此盆地中部以高正磁异常为主,布格重力异常 对周边地区高,东海陆架盆地及其周边海域的重力场的主要走向为NNE向,局部重力异常较为平缓,磁异常走向没有重力异常明显,但主要也为NNE向,重、磁场的分布特征表明,东海陆架盆地及其邻域的地质构造为大陆架构造的延伸。  相似文献   

9.
裂陷盆地基底双界面模式二维重力反演   总被引:2,自引:1,他引:1       下载免费PDF全文
裂陷盆地基底的起伏表现为非光滑的几何形态,传统的重力反演结果并不能很好地反映这种特点.此外,大多数情况下,重力观测面并不位于盆地上界面,应为单独的起伏观测面,盆地应为上界面和基底组成的双界面模式.基于此,本文研究了起伏观测面上裂陷盆地基底双界面模式二维重力反演方法.研究中假设沉积盆地的沉积层与基底的密度差随深度按双曲线规律变化.将沉积盆地的沉积层剖分成相邻的垂直柱体,其水平尺寸是已知的,顶面与沉积层上界面重合,底面深度代表基底的深度,即为要反演的参数.反演中引入全变差函数作为盆地模型的约束,使得反演结果呈现非光滑形态,符合裂陷盆地基底特征.为减小反演多解性,引入已知深度点作为约束.建立由重力数据拟合、已知深度约束及全变差函数组成的目标函数,采用非线性共轭梯度算法使目标函数最小化.模型试算结果表明该方法可反演裂陷盆地基底起伏,并通过调整正则化参数的值可反演坳陷盆地基底起伏.将该反演方法用于珠江口盆地惠州凹陷和运城-临汾裂陷盆地实际资料处理,其结果较好地反映了裂陷盆地基底起伏特征,为研究盆地构造、油气勘探等提供重要参考.  相似文献   

10.
直接迭代法是利用重力异常反演密度界面的一种重要方法,对迭代公式分析的结果表明,可在反演公式中添加加速收敛因子以减少反演的迭代次数从而提高效率.对于平缓的密度界面采用较小的加速收敛因子、而对起伏较大的界面采用较大的加速收敛因子可有效减少反演迭代次数.为此,本文利用重力异常总水平导数判断待反演界面起伏平缓和起伏较大的区域,并以此为基础,将总水平导数计算结果归一化至1.4~2.2之间而形成全区变化的加速收敛因子.假设待反演密度界面上下的密度差沿横向变化,将加速收敛因子加入迭代公式中形成最终的反演迭代公式.模型试算结果证实了本文方法可有效减少直接迭代法的迭代次数,并且也适用于含噪重力数据反演.最后将该方法用于渭河盆地西安凹陷的实际资料处理之中,反演结果证实了该方法的实用性.  相似文献   

11.
12.
A procedure for short-term rainfall forecasting in real-time is developed and a study of the role of sampling on forecast ability is conducted. Ground level rainfall fields are forecasted using a stochastic space-time rainfall model in state-space form. Updating of the rainfall field in real-time is accomplished using a distributed parameter Kalman filter to optimally combine measurement information and forecast model estimates. The influence of sampling density on forecast accuracy is evaluated using a series of a simulated rainfall events generated with the same stochastic rainfall model. Sampling was conducted at five different network spatial densities. The results quantify the influence of sampling network density on real-time rainfall field forecasting. Statistical analyses of the rainfall field residuals illustrate improvement in one hour lead time forecasts at higher measurement densities.  相似文献   

13.
14.
正This journal is established by the Institute of Engineering Mechanics(IEM),China Earthquake Administration,to promote scientific exchange between Chinese and foreign scientists and engineers so as to improve the theory and practice of earthquake hazards mitigation,preparedness,and recovery.To accomplish this purpose,the journal aims to attract a balanced number of papers between Chinese and  相似文献   

15.
Water quality analyses for the Niger River for the 1980/81 hydrological year are presented. The samples were collected from the main river at Lokoja, and from two main tributaries, the Kaduna and the Benue Rivers. Different water types were distinguished by the concentrations of major ions. The type Ca > Na > Mg > K - HCO3 > SO4 > Cl was represented at all stations during at least part of the year. Chloride was found to dominate the sulphate ion in the Kaduna and Niger, while the Benue maintained a higher concentration of sulphate relative to chloride all year round. Distinct patterns of seasonal variation in the ion concentrations were observed, particularly for the samples collected at Lokoja. Low ion concentrations were prominent during periods of high discharge, while low flow periods coincided with high dissolved ion concentrations. The contribution of rainwater to the total dissolved solids in the river waters was assessed indirectly using rainwater chemistry data from the Gulf of Guinea. The estimated rainwater contribution to the Lower Niger amounts to 5.15 mg 1?1. Geochemical weathering calculations involving reactions of the four major minerals of granitic rocks - anorthite, biotite, albite, and K-feldspar - with carbon dioxide and water, can account for the average water composition of the Lower Niger. The proportion of the ionic components was also related to the occurrence of the respective element in the minerals.  相似文献   

16.
Historical earthquakes noted in the written records of the South China region, including Hong Kong, are not well delineated along identified prominent fault sources. Despite the lack of any definitive, localised trend in the spatial distribution of seismic activity in the region, there does appear to be some major disparity in the seismic activity rates (especially for large magnitude earthquakes) between the near-field and the far-field regions of Hong Kong. Despite this observation, previous studies of the regional seismic activity and seismic ground motion hazard (the latter using a probabilistic seismic hazard assessment, PSHA) have considered very broad source zone regions, in which uniform levels of seismic activity have been assumed. The present paper further scrutinises this broad source zone (BSZ) approach by adopting a novel expanding circular disc (ECD) method to determine the rates of earthquake recurrence. Such a method is intended to counter-check previously developed models by determining earthquake scenario events in terms of magnitude–distance (M–R) pairs or combinations, having defined values of average return period. Unlike the BSZ approach, the ECD method specifically accounts for the supposed variations in the seismic activity rates between events in the near-field and the far-field of Hong Kong.The form of the developed method is particularly suited to the determination of design-level earthquake ground motions for bedrock sites, since it assumes a directionally-independent attenuation model as described in the companion paper. It is found that, whilst the BSZ approach may indicate the overall average levels of hazard that are representative of the South China region as a whole, it does not capture the large disparity in seismic activity rates between near-field and far-field events. This important feature is expected to have a significant impact upon engineering assessments of the seismic safety of structures in Hong Kong and elsewhere in the South China region. For example, it is found that for events with M≥6, the seismic activity rate (normalised by time and area) in the very far-field is around 3.5 times larger than in the near-field and medium-field of Hong Kong. The resulting design M-R combinations, covering a range of return periods from 70 to 2500 years, are limited, for very long return periods and for distant events, by the maximum credible earthquake (MCE) magnitude. Intensive research to determine this seismic hazard parameter is recommended, in order to refine further the results of the ECD analysis, which presently conservatively assumes the MCE to range between M=6 in the near-field of Hong Kong to M=8 in the very far-field, at distances greater than 280 km from Hong Kong.  相似文献   

17.
Lower Cretaceous lacustrine oil shales are widely distributed in southeastern Mongolia. Due to the high organic carbon content of oil shale, many geochemical studies and petroleum exploration have been conducted. Although most of the oil shales are considered to be Early Cretaceous in age, a recent study reveals that some were deposited in the Middle Jurassic. The present study aims at establishing depositional ages and characteristics of the Jurassic and Cretaceous lacustrine deposits in Mongolia. The Lower Cretaceous Shinekhudag Formation is about 250 m thick and composed of alternating beds of shale and dolomite. The Middle Jurassic Eedemt Formation is about 150 m thick and composed of alternating beds of shale, dolomitic marl, and siltstone. The alternations of shale and dolomite in both formations were formed by lake level changes, reflecting precipitation changes. Shales were deposited in the center of a deep lake during highstand, while dolomites were formed by primary precipitation during lowstand. Based on the radiometric age dating, the Shinekhudag Formation was deposited between 123.8 ±2.0 Ma and 118.5 ±0.9 Ma of the early Aptian. The Eedemt Formation was deposited at around 165–158 Ma of Callovian–Oxfordian. The calculated sedimentation rate of the Shinekhudag Formation is between 4.7 ±2.6 cm/ky and 10.0 ±7.6 cm/ky. Shales in the Shinekhudag Formation show micrometer‐scale lamination, consisting of algal organic matter and detrital clay mineral couplets. Given the average thickness of micro‐laminae and calculated sedimentation rate, the micro‐lamination is most likely of varve origin. Both Middle–Upper Jurassic and Lower Cretaceous lacustrine oil shales were deposited in intracontinental basins in the paleo‐Asian continent. Tectonic processes and basin evolution basically controlled the deposition of these oil shales. In addition, enhanced precipitation under humid climate during the early Aptian and the Callovian–Oxfordian was another key factor inducing the widespread oil shale deposition in Mongolia.  相似文献   

18.
ABSTRACT

The one-dimensional transient downward entry of water in unsaturated soils is investigated theoretically. The mathematical equation describing the infiltration process is derived by combining Darcy's dynamic equation of motion with the continuity and thermodynamic state equations adjusted for the unsaturated flow conditions. The resulting equation together with the corresponding initial and boundary conditions constitues a mathematical initial boundary value problem requiring the solution of a nonlinear partial differential equation of the parabolic type. The volumetric water content is taken as the dependent variable and the time and the position along the vertical direction are taken as the independent variables. The governing equation is of such nature that a solution exists for t > 0 and is uniquely determined if two relationships are defined, together with the specified state of the system, at the initial time t = 0 and at the two boundaries. The two required relations are those of pressure versus permeability and pressure versus volumetric water content.

Since the partial differential equation has strong non-linear terms, a discrete solution is obtained by approximating the derivatives with finite-differences at discrete mesh points in the solution domain and integrated for the corresponding initial and boundary conditions. The use of an implicit difference scheme is employed in order to generate a system of simultaneous non-linear equations that has to be solved for each time increment. For n mesh points the two boundary conditions provide two equations and the repetition of the recurrence formula provides n—2 equations, the total being n equations for each time increment. The solution of the system is obtained by matrix inversion and particularly with a back-substitution technique. The FORTRAN statements used for obtaining the solution with an electronic digital computer (IBM 704) are presented together with the input data.

Analysis of the errors involved in the numerical solution is made and the stability and convergence of the solution of the approximate difference equation to that of the differential equation is investigated. The method applied is that of making a Fourier series expansion of a whole line of errors and then following the progress of the general term of the series expansion and also the behavior of each constituent harmonic. The errors (forming a continuous function of points in an abstract Banach space) are represented by vectors with the Fourier coefficients constituting a second Banach space. The amplification factor of the difference equation is shown to be always less than unity which guarantees the stability of the employed implicit recurrence scheme.

Experiments conducted on a vertical column packed uniformly with very fine sand, show a satisfactory agreement between the theoretically and experimentally obtained values. Many experimental results are shown in an attempt to explain the infiltration phenomenon with emphasis on the shape and movement of the wet front, and the effects of the degree of compaction, initial water content and deaired water on the infiltration rate.  相似文献   

19.
20.
GHODRAT TORABI 《Island Arc》2012,21(3):215-229
Late Permian trondhjemites in the Anarak area occur as stocks and dykes, which cross cut the Anarak ophiolite and its overlying metasedimentary rocks, and are exposed along the northern Anarak east–west main faults. These leucocratic intrusive bodies have enclaves of all ophiolitic units and metamorphic rocks. They are composed of amphibole, plagioclase (oligoclase), quartz, zircon and muscovite. Secondary minerals are chlorite (pycnochlorite), epidote, albite, magnetite and calcite. Whole‐rock major‐ and trace‐element analyses reveal that they are characterized by high SiO 2 (67.8–71.0 wt%), Al 2 O 3 (14.9–17.1 wt%) and Na 2 O (5.3–8.6 wt%), low K 2 O (0.1–1.5 wt%; average: 0.8 wt%), low Rb/Sr ratio (0.01–0.40; average: 0.09), low Y (3–6 ppm), negative Ti, Nb and Ta anomalies, slightly negative or positive Eu anomaly, LREE enrichment and fractionated HREE. These rocks present 2 to 40 times enrichment in inclined chondrite‐normalized REE patterns. Geochemical characteristics of the Anarak trondhjemites all reflect melting of a mafic protolith at more than 10 kbar. The field evidence and whole‐rock chemistry reveal that these rocks have been crystallized from magmas derived from melting of subducted Anarak oceanic crust. This study reveals that melting of garnet amphibolite was an important element of continent formation in the study area.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号