共查询到20条相似文献,搜索用时 85 毫秒
1.
多波束探测技术的应用 总被引:2,自引:3,他引:2
介绍多波束探测技术在港口、航道测量和水下物体搜寻等方面的具体应用实例,进一步说明多波束探测技术的高精度、高效率、高密度和全覆盖的特点,展望多波束在三峡工程中的应用前景,为三峡工程水下探测提供新的技术手段。 相似文献
2.
3.
4.
Thermal fronts and cross-frontal heat flux in the southern Huanghai Sea and the East China Sea 总被引:1,自引:0,他引:1
Synoptic features in/around thermal fronts and cross-frontal heat fluxes in the southern Huanghai./Yellow Sea and East China Sea (HES) were examined using the data collected from four airborne expendable bathythermograph surveys with horizontal approxmately 35 km and vertical 1 m(from the surface to 400 m deep) spacings. Since the fronts are strongly affected by HES current system, the synoptic thermal features in/around them represent the interaction of currents with surrounding water masses. These features can not be obtained from climatological data. The identified thermal features are listed as follows : ( 1 ) multiple boundaries of cold water, asymmetric thermocline intrusion, locally-split front by homogeneous water of approxmately 18 ℃, and mergence of the front by the Taiwan Warm Current in/around summertime southern Cheju - Changjiang/Yangtze front and Tsushima front; (2) springtime frontal eddy-like feature around Tsushima front; (3) year-round cyclonic meandering and summertime temperature-inversion at the bottom of the surface mixed layer in Cheju - Tsushima front; and (4) multistructure of Kuroshio front. In the Kuroshio front the mean variance of vertical temperature gradient is an order of degree smaller than that in other HES fronts. The southern Cheju- Changjiang front and Cheju -Tsushima front are connected with each other in the summer with comparable cross-frontal temperature gradient. However, cross-frontal heat flux and lateral eddy diffusivity are stronger in the southern Cheju - Changjiang front. The cross-frontal heat exchange is the largest in the mixing zone between the modified Huanghai Sea bottom cold water and the Tsushima Warm Current, which is attributable to enhanced thermocline intrusions. 相似文献
5.
6.
7.
针对大型多波束地形调查中存在的多波束测量重叠区和接边区水深的不一致,研究了多波束测量重叠区和接边区的多波束数据的融合方法,分别采用反距离加权法、移动平均法和最小曲率法进行数据融合,比较3种方法的融合精度,认为最小曲率法是这3种方法中最适合用来进行重叠区多波束数据融合的方法. 相似文献
8.
9.
10.
11.
EM1002S与GeoSwath多波束声纳系统测深精度比较分析 总被引:1,自引:0,他引:1
多波束勘测之前,为了保证多波束成果质量,需要对多波束声纳系统进行一系列设备安装校准和精度评估工作.基于在渤海湾开展的多波束海底地形地貌勘测项目,在项目勘测之前,对EM1002S与GeoSwath多波束声纳系统进行了安装校准,并对2套多波束声纳系统的测深精度进行了比较分析,通过计算得到两套系统之间的最大测深误差为-0.38 m,测深误差主要为0~0.2 m,无超限数据,结果分析显示2套多波束声纳系统的测深精度满足勘测技术要求,为我们调查工作的顺利开展奠定了良好的基础. 相似文献
12.
13.
多波束测深边缘波束误差的综合校正 总被引:15,自引:2,他引:13
边缘波束误差是影响多波束测深数据精度的主要因素,数据精度影响其可信度和使用范围,也是进行相关研究的基础.多波束勘测系统声呐参数的精确校正、勘测区声场模型的建立以及实时勘测海洋噪声的合理剔除是影响边缘波束数据质量的关键因素,严重时甚至导致勘测数据出现沿测线方向的条带状假地形或地形位置偏移.上述因素对多波束勘测数据的影响是一个综合作用的过程,靠单一的校正或编辑方法很难提高采集数据的精度.以多波束勘测原理和声学理论为指导,以多波束实测数据为研究基础和分析对象,运用GIS面向对象方法,全面分析造成多波束勘测大误差边缘波束的原因,并探寻改善已勘测多波束大误差数据、提高数据精度的综合处理方法,最终以可视化的方式实现人机交互处理.该项研究成果已初步应用于海洋项目总图编绘工作,并取得了预期效果. 相似文献
14.
15.
16.
17.
18.
单波束测深仪是现代海洋和内河水下地形测量中使用最为频繁的测量仪器。硬件设备固有特性和水下复杂的特殊环境,易导致单波束测深仪在实际使用中产生各类型的粗差。单波束采集时按照每条测线进行处理,在数据处理上往往存在不同船只、不同测线难以一体化处理的问题。文中针对水深值粗差的特点,设计了单波束数据采集和处理一体化方法,在区域处理单波束数据的基础上,提出一种顾及地形的单波束水深测量数据多测线粗差检测方法,并针对上海周边实测区域对单波束测深数据采集和处理进行全方位的验证,结果表明应用本方法不但提升了数据精度和数据处理可靠性,而且大幅提高了作业效率。 相似文献
19.