共查询到20条相似文献，搜索用时 31 毫秒
1.
The International Maritime Organization has developed the second-generation intact stability criteria. Thus, damage stability criteria can be established in the future. In order to identity the capsizing probability of damaged ship under dead ship condition, this paper investigates two methods that can be used to research the capsizing probability in time domain, which mainly focus on the nonlinear righting lever GZ curve solution. One method subjects the influence of damaged tanks on the hull shape down to the wind and wave, and the other method is consistent with the real-time calculation of the GZ curve. On the basis of one degree of freedom rolling equation, the solution is Monte Carlo method, and a damaged fishery bureau vessel is taken as a sample ship. In addition, the results of the time-domain capsizing probability under different loading conditions are compared and analyzed. The relation of GM and heeling angle with the capsizing probability is investigated, and its possible reason is analyzed. On the basis of combining the time-domain flooding process with the capsizing probability calculation, this research aims to lay the foundation for the study of capsizing probability in time domain under dead ship condition, as well as provide technical support for capsizing mechanism of dead ship stability and damage stability criteria establishment in waves. 相似文献
2.
Most of the large scaled casualties are caused by loss of structural strength and stability due to the progressive flooding and the effect of waves and wind. To prevent foundering and structural failure, it is necessary to predict the motion of the damaged ship in waves.This paper describes the motion of damaged ship in waves resulting from a theoretical and experimental study. A time domain theoretical model, which can be applied to any type of ship or arrangement, for the prediction of damaged ship motion and accidental flooding has been developed considering the effects of flooding of compartments. To evaluate the accuracy of the model, model tests are carried out in ship motion basin for three different damaged conditions: engine room bottom damage, side shell damage and bow visor damage of Ro–Ro ship in regular and irregular waves with different wave heights and directions. 相似文献
3.
《Ocean Engineering》2004,31(3-4):483-512
Six degrees of freedom motion response tests of a Ro-Ro model have been carried out in regular waves for intact and damaged conditions. The stationary model was tested in different wave heights and wave frequencies for the head, beam and stern quartering seas in order to explore the effect of damage and varying wave heights on the motion responses of the model. Analysis of the results indicates that damage has an adverse effect on the motion responses of the model depending upon the directionality of the waves and frequency range applied. 相似文献
4.
The prediction of ship stability during the early stages of design is very important from the point of vessel’s safety. Out of the six motions of a ship, the critical motion leading to capsize of a vessel is the rolling motion. In the present study, particular attention is paid to the performance of a ship in beam sea. The linear ship response in waves is evaluated using strip theory. Critical condition in the rolling motion of a ship is when it is subjected to synchronous beam waves. In this paper, a nonlinear approach has been tried to predict the roll response of a vessel. Various representations of damping and restoring terms found in the literature are investigated. A parametric investigation is undertaken to identify the effect of a number of key parameters like wave amplitude, wave frequency, metacentric height, etc. 相似文献
5.
6.
The dynamics of a damaged ship in waves is a complex phenomenon regarding fluid and structure interactions. Flooded water motions in the damaged compartment could be influenced by decks, obstructions and obstacles in the compartment. This becomes particularly relevant in case of flooding in the engine room that is usually characterized by the presence of large objects such as engines and machineries. In such cases the possibility to better understand the behavior of a damaged ship, influenced by the fluid and structure interactions, could provide novel outcomes and thus enhance the damaged ship safety.In this paper an experimental campaign is conducted on a passenger ferry hull. The effects of obstacles in the engine room compartment, such as decks and engines, on ship roll responses, are studied. Roll decay in still water and steady roll responses in beam regular waves at zero speed are measured for the empty compartment and for the compartment with obstructions, as defined above.The main outcomes from the conducted experiments disclose a mitigation of the resonant behavior of the coupled system, ship with damaged compartment, by having engine shapes occupying the flooded engine room. Moreover it is possible to observe how the resonant frequency of the ship modifies having a more realistic arrangement of damaged compartment and how motion RAOs and roll decay characteristics modify accordingly. 相似文献
7.
The purpose of this paper is to analyze the nonlinear ship roll motion equation and the main parameters that induce ship capsizing in beam seas, estimate the survival probability of a ferry in random seas and to find out a risk assessment method for the ship’s intact stability. A single degree of freedom (1-DOF) dynamic system of ship rolling in beam seas is investigated and the nonlinear differential equation is solved in the time domain by the fourth order Runge-Kutta algorithm. The survival probability of a ferry in beam seas is investigated using the theory of “safe basin”. The survival probability is calculated by estimating erosion of “safe basin” during ship rolling motion by Monte Carlo simulations. From the results it can be concluded that the survival probability of a ship in beam sea condition can be predicted by combining Monte Carlo simulations and the theory of “safe basin”. 相似文献
8.
M. Taylan 《Ocean Engineering》2000,27(9):1159
Many researchers have studied a wide range of nonlinear equations of motion describing a ship rolling in waves. In this study, a form of nonlinear equation governing the motion of a rolling ship subjected to synchronous beam waves is suggested and solved by the generalized Duffing's method in the frequency domain. Various representations of damping and restoring terms found in the literature are investigated and their solutions are analyzed by the above-mentioned method. Comparative results of nonlinear roll responses are obtained for four distinct vessel types at resonance conditions which constitute the worst situation. The results indicate the importance of roll damping and restoring, when constructing a nonlinear roll model. An inappropriate selection of damping and restoring terms may lead to serious discrepancies with reality, especially in peak roll amplitudes. 相似文献
9.
The present paper describes a mathematical model in which the fluid motion inside a U-tank is nonlinearly coupled to the heave, roll and pitch motions of the ship. The main purpose of the investigation is centred on the control of roll motion in the case of parametric resonance in longitudinal waves. A transom stern small vessel, known to be quite prone to parametric amplification, is employed in the study. Four tank designs are employed in order to study the influence of tank mass, tank natural frequency and tank internal damping on the control of parametric rolling at different head seas conditions. Additionally, the influence of the vertical position of the tank is also investigated. The main results are presented in the form of limits of stability, with encounter frequency and wave amplitudes as parameters. Distinct dynamical characteristics are discussed and conclusions are drawn on the relevant parameters for the efficient control of the roll amplifications in head seas. 相似文献
10.
The world container fleet shows the fastest growth of any ship type. The infrastructure for loading and unloading container ships are also growing in many ports around the world. Such a trend is due to the fact that the containerized transportation is becoming more and more attractive due to many factors. The increasing demand in container transportation is met by use of more number of container ships including Post-Panamax and Malacca-max containers. Loss of containers in seas and accidents of container vessels are reported from many parts of seas. New generation containers are severely hit by parametric rolling. Pure loss of stability, due to exponential increase of roll in either broaching—to or head sea conditions, is called parametric rolling, is subjected to rigorous investigation by many researchers. Algebraic expression based on well known Duffing's method is proposed for solutions in parametric rolling. The variation in GM and damping values from trough to crest conditions associated with bow flare immersion and emergence in head sea conditions with pitch resonance with the heading waves are said to be the prime reason for parametric rolling. A simple model to predict the beginning of parametric rolling is described in this paper. 相似文献
11.
12.
Ship motions after damage are difficult to evaluate since they are affected by complex phenomena regarding fluid and structures interactions. The possibility to better understand how ship behavior in damage is influenced by these phenomena is important for improving ship safety, especially for passenger vessel.In this paper an experimental campaign is carried out on a passenger ferry hull, to show the effects of the water dynamics across damage openings on ship motions. Novel aspects of this research include the study of the effects of the damage position on the ship roll response. The study is carried out for still water and for beam regular waves at zero speed.Results from the experiments carried out underline that the roll behavior of a damaged ship is affected by the position of damage opening and not only by its size. Assuming the same final equilibrium conditions after flooding but characterized by different damage openings it is possible to observe how motions RAOs and roll decay characteristics modify according to the opening locations. 相似文献
13.
Muhittin Sylemez 《Ocean Engineering》1998,25(4-5)
The purpose of the study was to develop a prediction technique to simulate the motion response of a damaged platform under wave, wind and current forces. The equations of motion were obtained using Newton's second law and the numerical solution technique of non-linear equations of motion is explained for intact and damaged cases. The analysis technique employs large displacement non-linear equations of motion. Solutions were obtained in the time-domain to predict the motion characteristics. In this study, analysis procedures were developed to calculate: (a) wave loading on asymmetrical structural configurations; (b) hydrodynamic reaction forces (inertia or moment of inertia, damping and restoring forces) on asymmetrical shapes. During the damage simulation, change in the mass of the structure as well as wave and hydrodynamic reaction forces, were taken into account. The computer program developed for the time-domain simulation is introduced. In order to avoid slowly decaying transient motions of the structure due to wave excitation forces, an exponential ramp function is used. The application of a ramp function enables a quick convergence in the time-domain solution of equations of motion. Results of a numerical motion simulation program and the experimental studies are also presented in order to make comparisons. Comparison of the test results with the numerical simulations shows good agreement for heave, roll and pitch motions. The formulations and the computational procedures given in this paper provide useful tools for the investigation of the non-linear dynamic stability characteristics of floating structures in waves for intact, damaged and post-flooding conditions in six-degrees of freedom. 相似文献
14.
概念性地设计了一种新型半潜式海上风力机基础,确定了结构的型式和尺寸,对风浪联合作用下不同工况的风力机基础稳性进行了校核.考虑黏性阻尼和二阶波浪力的作用,计算分析了风力机基础的水动力系数、幅频运动以及动力响应特性.结果表明,经过改进的新型风力机基础具有良好的稳性和水动力性能,特别是在垂荡性能上有大幅的提升.波浪入射角度对垂荡的影响不大,但对其他自由度RAOs影响较大.垂荡、横摇和纵摇RAOs均存在一个主峰值和次峰值,但峰值周期均远离波能集中区.此外还发现,不同工况下风浪入射角对风机系统的动力响应和系泊力均有较大影响,相对于工作工况,极端工况下所受风荷载较小,但是系泊力更大. 相似文献
15.
İ. Resatözkan 《Ocean Engineering》1981,8(6):551-598
In this paper the “total (practical) stability” concept is introduced to nonlinear forced rolling motion of a ship. This is achieved by employing “boundedness” and “Lyapunov's function” approach. In this respect two new theorems are proved and conditions and domain of Practical Stability are evaluated. The Paper also contains a critical review of the present status of international intact ship stability regulations. A qualitative discussion of oscillatory rolling motion and the capsizing phenomena is presented. 相似文献
16.
The dynamic stability of fishing vessels in longitudinal regular waves is investigated, both analytically and experimentally. In particular, the influence of stern shape on the parametric stability of fishing vessels is studied. Vessels TS and RS have very similar main characteristics, but their sterns are different. Although their linear responses are comparable, both analytical and experimental investigations indicate substantial differences in their dynamic stability in longitudinal regular waves. Strong resonances are found for the vessel with the deep transom. The analytical method takes into consideration the effects of the heave and pitch motions and wave passage and shows good agreement with experimental results. Stability limits are obtained for different conditions and are used as an aid in the discussion of the results obtained in the tests when relevant parameters are changed, such as wave amplitude and frequency, metacentric height and roll damping moment. 相似文献
17.
Capsizing of ships constitutes a primary group of casualties that leads to loss of life and money. Unfortunately, its mechanism has yet to be fully resolved due to underlying complex dynamics and parameters. Upon studying the causes in more detail, designing safer ships against capsizing may become a reality. In the present study, a relatively different approach called “reserve of stability” or “stability margins” which utilizes both statical and nonlinear dynamical aspects of stability is employed to analyze ship hydrodynamics. For this purpose a nonlinear roll model in beam waves has been implemented. In order to apply the theory, a capsized vessel is chosen to be analyzed in terms of stability. The necessary data about the vessel at the time of capsizing were collected from the published work found in the naval architecture literature. Suggestions are made based on the results of the analysis to improve ship stability qualities in a seaway. 相似文献
18.
The aim of this study is to examine both the stochastic rolling motion of ships in following seas by using analytical and numerical safe basin concept and to show how the concept of safe basin can be utilized for the assessment of the stability of ships. First, the boundary of the analytic safe basins of stochastic rolling motion is obtained by using the Lyapunov function used by Schurz (2009). Second, the safe basins of stochastic rolling motion are obtained numerically by using stochastic Euler (Euler–Maruyama) method. It is concluded that the analytically and numerically obtained safe basins are coherent. Lastly, the practical intact stability criterion for ships in following seaway is developed by proposing a formula given for the maximum width of analytic safe basin. 相似文献
19.
M. Söylemez 《Ocean Engineering》1996,23(5):423-445
This paper presents the derivation of a general method for calculating wave forces on the cylindrical members of offshore structures. By means of the proposed method one can calculate the wave loading on cylindrical members of fixed or floating offshore structures orientated randomly in waves. This method of calculating wave forces is based on the linear Airy wave theory. Calculation procedure of wave force components is presented in great detail on the basis of wave particle kinematic properties obtained from the linear Airy wave theory. In the procedure of calculating wave forces presented, definitions of the wave reference system for propagating wave, the structure reference system for the platform and the member reference system for the tubular members of the structure are first established, and then the calculation of wave forces is given in terms of its components, which are pressure, acceleration and velocity forces, including current forces. At the end of the paper, expressions of total heave, sway and surge forces and total roll, pitch and yaw moments acting on the platform are given as a sum of these forces acting on each member of the platform. The calculation procedure derived in this paper provides a very efficient means of calculating wave forces and moments during the time-domain simulations of a floating platform experiencing large amplitude motion in intact, progressive flooding and damaged conditions. Comparisons of the predictions with the measurements which will be presented elsewhere reveal that the calculation procedure developed can predict large amplitude oscillatory and steady motion characteristics of an intact and damaged platform in waves with an acceptable degree of accuracy. 相似文献
20.
Structural Types of Sea Embankment and Their Stability Analysis 总被引：1，自引：0，他引：1
MAO Changxi DUAN Xiangbao MAO Peiyu Prof. Senior Engineer Hydraulic Engineering Department Nanjing Hydraulic Research Institute 《中国海洋工程》1998,(3)
In this paper based on investigation on the structural types of sea embankments in thesoutheast coastal area of China,as well as the related tidal stages,waves and strength of marine soils,thefinite element method(FEM)calculations for seepage flow stability,including the overall stability againstsliding and local stability of sloping surface under the action of tidal stage and waves are carried out.Acomparison of the computational results of FEM for single circular slip,composite circular slip andgeogrid reinforcement against sliding shows that for calculation of stability against sliding of marine softsoil foundation it is even more reasonable to use the composite circular slip.The stability of sloping typesea embankment against sliding is slightly better than that of the vertical face type;for the combination ofthree defences(wave,scour and seepage defences)the sea embankment structural type of a compositecross section with a platform should be a good one,but it still should be suitable to local condit 相似文献