共查询到20条相似文献，搜索用时 468 毫秒
1.
Oblique wave scattering by undulating porous bottom in a two-layer fluid: Fourier transform approach
Srikumar Panda 《地球物理与天体物理流体动力学》2014,108(6):587-614
The problem involving scattering of oblique waves by small undulation on the porous ocean bed in a two-layer fluid is investigated within the framework of linearised theory of water waves where the upper layer is free to the atmosphere. In such a two-layer fluid, there exist waves with two different wave numbers (modes): wave with lower wave number propagates along the free surface whilst that with higher wave number propagates along the interface. When an oblique incident wave of a particular mode encounters the undulating bottom, it gets reflected and transmitted into waves of both modes so that some of the wave energy transferred from one mode to another mode. Perturbation analysis in conjunction with Fourier transform technique is used to derive the first-order corrections of velocity potentials, reflection and transmission coefficients at both modes due to oblique incident waves of both modes. One special type of undulating bottom topography is considered as an example to evaluate the related coefficients in detail. These coefficients are shown in graphical forms to demonstrate the transformation of water wave energy between the two modes. Comparisons between the present results with those in the literature are made for particular cases and the agreements are found to be satisfactory. In addition, energy identity, an important relation in the study of water wave theory, is derived with the help of the Green’s integral theorem. 相似文献
2.
M. R. Sarangi 《地球物理与天体物理流体动力学》2013,107(3):303-325
ABSTRACTA hydro-elastic frame has been considered to investigate the proliferation of waves over small base deformation on an infinitely extended flexible seabed. The flexible base surface is assumed as a thin elastic plate of very small thickness and it depends on the Euler–Bernoulli beam equation. For any particular frequency, there are two different modes of time-harmonic propagating wave exists rather than one mode of propagating wave along the positive horizontal direction. The waves with smaller wavenumber spread along the free-surface of the sea (say, free-surface mode) and the waves with higher wavenumber spread along the flexible base surface (say, flexural mode). A simplified perturbation approach is utilised to bring down the entire equations which govern the original boundary value problem (bvp) to a less complex bvp for the first-order velocity potential function. The first-order potential function along with the first-order reflection and transmission coefficients for both modes are calculated by a procedure based upon Fourier transform approach. A shape of sinusoidal swells flexible base surface is taken as an example to approve the scientific results. It is observed that when the train of normal incident propagating wave spreads over base distortion because of either the free-surface unsettling influence or the flexural wave movement in the sea, the reflected and transmitted energy are always feasible to be exchanged from one particular wave mode to another wave mode. Furthermore, we notice that the realistic changes in the flexural rigidity behaviour on the flexible base surface of the sea have a significant effect on the problem of water wave proliferation over small base deformation. Moreover, the energy conservation equation is derived with the help of the Green's integral theorem. The results for the values of reflection and transmission coefficients obtained for both the free-surface unsettling influence as well as flexural wave movement in the fluid are found to satisfy the energy conservation equation almost accurately. 相似文献
3.
Using two-dimensional linear water wave theory, we consider the problem of normal water wave (internal wave) propagation over
small undulations in a channel flow consisting of a two-layer fluid in which the upper layer is bounded by a fixed wall, an
approximation to the free surface, and the lower one is bounded by a bottom surface that has small undulations. The effects
of surface tension at the surface of separation is neglected. Assuming irrotational motion, a perturbation analysis is employed
to calculate the first-order corrections to the velocity potentials in the two-layer fluid by using Green’s integral theorem
in a suitable manner and the reflection and transmission coefficients in terms of integrals involving the shape function c(x) representing the bottom undulation. Two special forms of the shape function are considered for which explicit expressions
for reflection and transmission coefficients are evaluated. For the specific case of a patch of sinusoidal ripples having
the same wave number throughout, the reflection coefficient up to the first order is an oscillatory function in the quotient
of twice the interface wave number and the ripple wave number. When this quotient approaches one, the theory predicts a resonant
interaction between the bed and the interface, and the reflection coefficient becomes a multiple of the number of ripples.
High reflection of the incident wave energy occurs if this number is large. Again, when a patch of sinusoidal ripples having
two different wave numbers for two consecutive stretches is considered, the interaction between the bed and the interface
near resonance attains in the neighborhood of two (singular) points along the x-axis (when the ripple wave number of the bottom undulation become approximately twice as large as the interface wave number).
The theoretical observations are presented in graphical form. 相似文献
4.
Using Biot’s poroelasticity theory, we derive expressions for the reflection and transmission coefficients for a plane shear wave incident on an interface separating two different poroelastic solids. The coefficients are formulated as a function of the wave incidence angle, frequency and rock properties. Specific cases calculated include the boundary between water-saturated sand and water-saturated sandstone and the gas–water interface in sand. The results show a very different interface response to that of an incident P wave. Plane SV wave incidence does not significantly excite the Biot slow P wave if the frequency of the wave is below the transition frequency. Above this frequency, an incident plane SV wave can generate a mode-converted slow Biot P wave which is actually a normal propagating wave and not highly attenuating as in the usual (diffusive) case. For an incident SV wave onto a gas–water interface, even at very high frequency, there is no significant Biot second P wave produced. For small incident angles, the gas–water interface is essentially transparent. With increasing angles, there can arise an unusual "definitive angle" in the reflection/transmission coefficient curves which is related to the change of fluid viscosity on both sides of the interface and provides a possible new means for underground fluid assessment. 相似文献
5.
Reflection and refraction at an imperfectly bonded interface between poroelastic solid and cracked elastic solid 总被引：1，自引：1，他引：0
Porous solid is in contact with a cracked elastic solid at a plane interface between them. For the presence of vertically aligned microcracks, the elastic solid behaves transversely isotropic to wave propagation. The coefficients of elastic anisotropy depend on the crack density and crack porosity in the medium. A loose bonding is considered between the two solids so that a limiting case could be the welded contact. At the plane interface, the imperfection in welded bonding is represented by tangential slipping and, hence, results in the dissipation of a part of strain energy. Three types of waves propagate in an isotropic fluid-saturated porous medium, which are considered for incidence at the interface. Incidence of a wave results in three reflected waves and two refracted waves. Partition of incident energy among the reflected and refracted waves is studied for each incidence, varying from normal to grazing directions. Numerical example calculates the energy shares of reflected and refracted waves at the plane interface between water-saturated sandstone and basalt. These energy shares are computed and analyzed for different values of crack parameters as well as loose bonding parameter. 相似文献
6.
弹性孔隙介质分界面上的反透射系数特征,在岩性划分、流体识别、储层边界判识等方面有重要的应用.本文研究上层为含两项不混合黏性流体孔隙介质、下层为含单项黏性流体孔隙介质分界面上的反透射理论.首先根据两种孔隙介质分界面上的能量守恒得到边界条件,再将波函数、位移、应力与应变关系代入边界条件,推导出完全连通孔隙情况下,第一类纵波入射到孔隙介质分界面上的反透射系数方程.通过建立砂岩孔隙介质模型,分别分析不同孔隙流体类型、不同含油饱和度及不同入射角情况下,各类波的反透射系数特征.研究表明,第二、三类纵波反透射系数数值比第一类纵波小多个数量级,且两者对入射角的变化不敏感,但对孔隙流体性质、含油饱和度的变化较敏感,而横波反透射系数特征恰好与此相反;第一类纵波反透射系数特征比较复杂,入射角、孔隙流体的性质及含油饱和度的变化都对其产生影响.不同孔隙流体弹性物性的差异、孔隙介质中含油饱和度的变化及不同入射角引起垂向和切向应力分量的变化都会影响各类波的反透射系数特征,分析这些特征可以为研究储层含油气性提供理论基础. 相似文献
7.
The scattering of first mode linear baroclinic Rossby waves by a top-hat ridge in a continuously stratified ocean, with Brunt-Väisälä frequency that decays exponentially with depth below a surface mixed layer, is the subject of this study. A numerical mode matching technique is used to calculate the transmission coefficients for the propagating modes over the ridge. It is found that the scattered field depends crucially upon the stratification. For example, when the majority of the density variation is confined to a thin thermocline, corresponding to a small e-folding scale, gamma ?1, for the Brunt-Väisälä frequency, a large amount of the incident wave energy is reflected by a small amplitude ridge. Appreciable energy conversion between the propagating barotropic and baroclinic modes takes place in this case. An asymptotic analysis for a small amplitude ridge is presented that confirms these numerical results. In the limit gamma ?1→ 0, it is demonstrated that the scattered field in the continuously stratified ocean model differs markedly from the two-layer solution. The latter does not exhibit appreciable reflection of the incident wave energy for a small amplitude ridge. In conclusion, the application of a two-layer ocean model to describe Rossby wave scattering by ridges in place of a continuously stratified model cannot be recommended. 相似文献
8.
S. C. Martha 《地球物理与天体物理流体动力学》2013,107(2):65-80
The problem of oblique water wave diffraction by small undulation of the bottom of a laterally unbounded ocean is considered using linear water wave theory. A perturbation analysis is employed to obtain the velocity potential, the reflection and the transmission coefficients up to the first order in terms of integrals involving the shape functions c(x) representing the bottom undulation. Finite cosine transform is used to find the first order potential, and this potential is utilised in obtaining the first order reflection and transmission coefficients. Some particular forms of the shape function representing an exponentially damped undulation, a single hump and a patch of sinusoidal ripples are considered and the integrals for the reflection and transmission coefficients are evaluated. For the exponentially damped undulation, it is observed that the reflection ceases much before transmission while for the single hump, reflection and transmission go hand in hand up to a certain value of the wavenumber, after which they vanish. For the patch of sinusoidal ripples having the same wavenumber, the reflection coefficient up to the first order is found to be an oscillatory function in the quotient of twice the component of the wavenumber along x-axis and the ripple wavenumber. When this quotient becomes one, the theory predicts a resonant interaction between the bed and free surface, and the reflection coefficient becomes a multiple of the number of ripples. High reflection of the incident wave energy occurs if this number is large. Also, when a patch of ripples having different wavenumbers is considered the same result follows. Known results for the normal incidence are recovered as special cases for the patch of sinusoidal ripples. The theoretical observations are shown computationally. 相似文献
9.
10.
Due to the presence of joints, waves are greatly attenuated when propagating across rock masses. Zhu et al. (2011) (Normally incident wave propagation across a joint set with virtual wave source method. J. Appl. Geophys.73, 283–288.) studied normally incident wave propagation across a joint set with the virtual wave source method (VWSM). The introduced VWSM has merits in some aspects, especially the capability of separating differently arriving transmitted waves. However, normal wave incidence is only the special case for wave incidence with arbitrary incident angles. Obliquely incident wave propagation across a joint set is more complicated than normally incident wave propagation due to wave transformation at the joints. As a continuation of the previous paper, this work is extended to analytically study obliquely incident wave propagation across joints with VWSM. Complete theoretical reflection and transmission coefficients across single joint described by displacement discontinuity model are derived through plane wave analysis. The superposition of P wave and S wave is for the first time mathematically expressed and studied. The VWSM is verified through comparison with the propagation matrix method. Through extensive parametric studies on wave transmission across single and multiple parallel joints, it is shown that transmitted wave energy is mainly constrained in the transmitted wave of the same type as the incident wave. And with increasing joint stiffness, the transmission coefficients across single joint increases except those whose wave type is different from the incident wave. The amplitude of superposed transmitted wave for P wave incidence increases with incident angle, which is coincident with field observations. Both joint spacing and number of joints have significant effects on transmission coefficients. We find that when joint spacing is sufficiently large, the transmission coefficient is no longer a constant as the normally incident wave propagation case (Zhu et al., 2011). And when joints are very closely spaced, wave attenuation depends little on the number of joints, which is different from the conclusions from equivalent medium method. 相似文献
11.
Most amplitude versus offset (AVO) analysis and inversion techniques are based on the Zoeppritz equations for plane‐wave reflection coefficients or their approximations. Real seismic surveys use localized sources that produce spherical waves, rather than plane waves. In the far‐field, the AVO response for a spherical wave reflected from a plane interface can be well approximated by a plane‐wave response. However this approximation breaks down in the vicinity of the critical angle. Conventional AVO analysis ignores this problem and always utilizes the plane‐wave response. This approach is sufficiently accurate as long as the angles of incidence are much smaller than the critical angle. Such moderate angles are more than sufficient for the standard estimation of the AVO intercept and gradient. However, when independent estimation of the formation density is required, it may be important to use large incidence angles close to the critical angle, where spherical wave effects become important. For the amplitude of a spherical wave reflected from a plane fluid‐fluid interface, an analytical approximation is known, which provides a correction to the plane‐wave reflection coefficients for all angles. For the amplitude of a spherical wave reflected from a solid/solid interface, we propose a formula that combines this analytical approximation with the linearized plane‐wave AVO equation. The proposed approximation shows reasonable agreement with numerical simulations for a range of frequencies. Using this solution, we constructed a two‐layer three‐parameter least‐squares inversion algorithm. Application of this algorithm to synthetic data for a single plane interface shows an improvement compared to the use of plane‐wave reflection coefficients. 相似文献
12.
13.
The effect of topography and subsurface inhomogeneity on surface motion is investigated in the case of Rayleigh waves. In the previous paper, the same effect was investigated in the case of SV waves. Several types of topography, such as cliffs both with and without a soft layer at the foot of the slope, are considered. Computations are made using a new hybrid method combining a particle model with a finite element method. In cases of harmonic Rayleigh waves, surface motions with amplitudes as large as 1.5 to 5 times the horizontal surface displacement of the incident Rayleigh waves are produced near the slope and the sloping interface. When a Rayleigh wave propagating through a hard single-layered ground encounters a sloping interface where hard ground and soft ground make contact with each other, Rayleigh waves having two different, phase velocities are produced and they correspond to the fundamental mode, and the first mode determined by Haskell's method. In addition, the transient response when Rayleigh waves propagate through the cliff is also simulated. Assuming the vertical component of the Tokachi-oki Earthquake (1968) measured on the surface to be a Rayleigh wave, the incident Rayleigh wave can be obtained by a Fourier synthesis of eigenfunctions of Rayleigh waves. 相似文献
14.
The phenomenon of reflection and transmission of plane harmonic waves at the plane interface between two dissimilar poroelastic solids saturated with two immiscible viscous fluids is investigated. Both porous media are considered dissipative due to the presence of viscosity in pore‐fluids. Four attenuated (three dilatational and one shear) waves propagate in such a dissipative porous medium. A finite non‐dimensional parameter is used to define the effective connections between the surface‐pores of two media at their common interface. Another finite parameter represents the gas‐share in the saturation of pores. An attenuated wave in a dissipative medium is described through the specification of directions of propagation and maximum attenuation. A general representation of an attenuated wave is defined through its inhomogeneous propagation, i.e., different directions for propagation and attenuation. Incidence of an inhomogeneous wave is considered at the interface between two dissipative porous solids. This results in four reflected and four transmitted inhomogeneous waves. Expressions are derived for the partition of incident energy among the reflected and transmitted waves. Numerical examples are studied to determine the effects of saturating pore fluid, frequency, surface‐pore connections and wave inhomogeneity on the strengths of reflected and transmitted waves. Interaction energy due to the interference of different (inhomogeneous) waves is calculated in both the dissipative porous media to verify the conservation of incident energy. 相似文献
15.
A problem of reflection and transmission of elastic waves at a plane interface between a uniform elastic solid half-space and a porous elastic half-space containing two immiscible fluids is investigated. The theory developed by Lo, Sposito and Majer for porous media containing two immiscible fluids is employed to find out the reflection and transmission coefficients. The incident wave is assumed to propagate through the uniform elastic half-space and two cases are considered. In the first case, a beam of plane longitudinal wave is assumed to be incident and in the second case, a beam of transverse wave is assumed to be incident at the interface. By taking granite as impervious elastic medium and columbia fine sandy loam containing air-water mixture as porous medium, reflection and transmission coefficients are obtained. By neglecting the inertial coupling coefficients, these coefficients are reduced to those obtained by Tomar and Arora using the theory of Tuncay and Corapcioglu. It is found that the inertial coupling parameters significantly affect the phase speeds and the amplitude ratios of the transmitted waves. 相似文献
16.
Propagation in the plane of mirror symmetry of a monoclinic medium, with displacement normal to the plane, is the most general circumstance in anisotropic media for which pure shear-wave propagation can occur at all angles. Because the pure shear mode is uncoupled from the other two modes, its slowness surface in the plane is an ellipse. When the mirror symmetry plane is vertical the pure shear waves in this plane are SH waves and the elliptical SH sheet of the slowness surface is, in general, tilted with respect to the vertical axis. Consider a half-space of such a monoclinic medium, called medium M, overlain by a half-space of isotropic medium I with plane SH waves incident on medium M propagating in the vertical symmetry plane of M. Contrary to the appearance of a lack of symmetry about the vertical axis due to the tilt of the SH-wave slowness ellipse, the reflection and transmission coefficients are symmetrical functions of the angle of incidence, and further, there exists an isotropic medium E with uniquely determined density and shear speed which gives exactly the same reflection and transmission coefficients underlying medium J as does monoclinic medium M. This means that the underlying monoclinic medium M can be replaced by isotropic medium E without changing the reflection and transmission coefficients for all values of the angle of incidence. Thus no set of SH seismic experiments performed in the isotropic medium in the symmetry plane of the underlying half-space can reveal anything about the monoclinic anisotropy of that underlying half-space. Moreover, even when the underlying monoclinic half-space is stratified, there exists a stratified isotropic half-space that gives the identical reflection coefficient as the stratified monoclinic half-space for all angles of incidence and all frequencies. 相似文献
17.
F. AMINZADEH 《Geophysical Prospecting》1989,37(8):893-906
Data from offshore Norway is used to study applications of elastic VSP modelling in detecting shear waves and observing the effects of successive mode conversion in field-recorded VSP data. The shear-wave velocities and densities from log data are used in conjunction with compressional wave velocities determined from surface seismic and log data in the VSP modelling. The time domain non-normal incidence elastic VSP modelling technique of Aminzadeh and Mendel is used as the modelling algorithm. Two surface seismograms are computed first. One is the vertical component and the other is the horizontal component for plane waves that have specified incident angles. A downward continuation method is then applied to generate seismograms at different depth points. The collection of these seismograms constitutes non-normal incidence VSPs. Both vertical and horizontal components of VSP data can be obtained by this procedure. In this paper non-normal incidence VSPs are generated for a 12.5° incident plane wave. The modelling results of layered earth systems of thin layers and thick layers are both compared with field data, and the effect of mode conversions in thin layers is observed. Several events in the field data can be explained by this elastic VSP modelling. Comparison of the model data and field data enabled a probable tube wave or out-of-plane event to be identified, the removal of which significantly improved the final VSP section. This study also shows how the VSP data helped the interpretation of the surface 3D data. 相似文献
18.
G.S. Murty 《Physics of the Earth and Planetary Interiors》1975,11(1):65-79
Assuming that the interface of two loosely bonded half spaces permits a finite amount of slip, and that a simple linear relation exists between the prevailing shearing stress and the slip, a generalised secular equation for the Stoneley mode is derived and solved numerically. The two limiting cases of smooth interface and bonded interface are shown to be special cases of this general problem.For some range of values of the elastic constants of the half spaces, unattenuated and undispersed interfacial waves can propagate along the interface only when the interface is smooth or bonded. For the same combination of elastic properties of the half spaces, the loosely bonded interface will cause the interfacial wave to be attenuated and dispersed.The usefulness of this model in relation to the problem of attenuation and dispersion of elastic body waves is briefly discussed. 相似文献
19.
Reflection and transmission of inhomogeneous waves in a composite porous solid saturated by two immiscible fluids 
下载免费PDF全文
下载免费PDF全文 This paper is concerned with reflection and transmission of a plane, elastic, and inhomogeneous wave striking obliquely at some discontinuity inside a porous medium composed of two distinct solids and saturated by two immiscible fluids. It is found that four P‐ and two SV‐waves are reflected, whereas four P‐ and two SV‐waves are transmitted at the interface. All reflected and transmitted waves are inhomogeneous in nature and specified with different directions of propagation and attenuation vectors. An expression for the Umov–Poynting energy flux vector is derived for the system. Continuity of energy flux along normal to the interface gives 12 required boundary conditions. Expressions of amplitude and energy ratios of various reflected and transmitted waves are derived. Variations in amplitude and energy coefficients of reflected and transmitted waves with angle of incidence are numerically studied for a porous matrix composed of shaley sandstone and clay, saturated with water and oil. The effects of change in oil saturation and volume fraction of clay are also observed on amplitude ratios. Numerical simulation reveals that the change in sign in the difference of capillary pressure across the interface causes jump in the values of amplitude ratios of all waves. 相似文献
20.
Finite‐difference P‐SV simulations of seismic scattering characteristics of faulted coal‐seam models have been undertaken for near‐surface P‐ and S‐wave sources in an attempt to understand the efficiency of body‐wave to channel‐wave mode conversion and how it depends on the elastic parameters of the structure. The synthetic seismograms clearly show the groups of channel waves generated at the fault: one by the downgoing P‐wave and the other by the downgoing S‐wave. These modes travel horizontally in the seam at velocities less than the S‐wavespeed of the rock. A strong Airy phase is generated for the fundamental mode. The velocity contrast between the coal and the host rock is a more important parameter than the density contrast in controlling the amplitude of the channel waves. The optimal coupling from body‐wave energy to channel‐wave energy occurs at a velocity contrast of 1.5. Strong guided waves are produced by the incident S‐sources for source angles of 75° to 90° (close to the near‐side face of the fault). As the fault throw increases, the amplitude of the channel wave also increases. The presence of a lower‐velocity clay layer within the coal‐seam sequence affects the waveguiding characteristics. The displacement amplitude distribution is shifted more towards the lower‐wavespeed layer. The presence of a ‘washout’ zone or a brecciated zone surrounding the fault also results in greater forward scattering and channel‐wave capture by the coal seam. 相似文献