首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 765 毫秒
1.
—The plate boundary along the north-central Caribbean margin is geologically complex. Our understanding of this complexity is hampered by the fact that plate motions are relatively slow (1 to 2 cm/yr), so that recent seismicity often does not provide a complete picture of tectonic deformation. Studies of the faulting processes of instrumentally recorded earthquakes occurring prior to 1962 thus provide important information regarding the nature and rate of seismic deformation within the region, and are essential for a comprehensive assessment of seismic hazard. We have conducted body waveform modeling studies of eight earthquakes which occurred along the north-central Caribbean plate margin, extending from southeastern Cuba to the Swan Island fracture zone (75 to 83°W). None of these earthquakes has been previously studied and several occurred in regions where no recent (post-1962) seismicity has been recorded. The plate margin in the western portion of our study area is characterized by a transform fault-spreading center system. In the central and eastern portions of our study area the plate margin is a complex, diffuse region of deformation that couples transform motion in the Cayman trough to subduction along the Lesser Antilles arc. Our results show that the western portion of the study area has only experienced large strike-slip earthquakes. Off southeastern Cuba two earthquakes appear to have occurred on high angle, northward dipping, reverse faults with south to southeastward directed slip vectors. An earthquake in northern Jamaica in 1957 shows pure strike-slip faulting, most likely along an east-west trending fault. Finally, an unusual sequence of events located in the Pedro Bank region ~70 km southwest of Jamaica has a mainshock with a reverse-oblique mechanism, suggesting continuity of the plate interface stress field well south of the northern Caribbean margin.  相似文献   

2.
欧亚地震带现代构造应力场及其分区特征   总被引：1，自引：0，他引：1  
利用美国哈佛大学矩心矩张量目录中的2818个地震的震源机制解资料,分析了欧亚地震带及其5个分区现代构造应力场的基本特征,给出了5个分区的震源机制主压应力方向分布图。结果表明:①欧亚地震带以逆断型和走滑型断层活动为主;②地中海地震区以走滑断层活动为主,主压应力方向为SSW向;③伊朗—阿富汗—巴基斯坦地震区以逆断型断层活动为主,主压应力优势方向为NNE—NS向;④喜马拉雅地震以逆断型为主,主压应力优势方向为NS和NE向;⑤川—滇—缅地震区以走滑断层活动为主,主应力场方向为NNE向;⑥印度尼西亚地震区以逆断型断层活动为主,主压应力优势方向为NE—SSW向。各分区的主压应力方向明显受其所在区域板块运动的影响,由此推测板块运动可能是产生欧亚地震带构造应力的主要力源。  相似文献   

3.
The 10 January 2018 MW7.5 Swan island, Honduras earthquake occurred on the Swan island fault, which is a transform plate boundary between the North American and Caribbean plates. Here we back-project the rupture process of the earthquake using dense seismic stations in Alaska, and find that the earthquake ruptured at least three faults (three stages) for a duration of ~40 s. The rupture speed for the longest fault (stage 3) is as fast as 5 km/s, which is much faster than the local shear wave velocity of ~4 km/s. Supershear rupture was incidentally observed on long and straight strike-slip faults. This study shows a supershear rupture that occured on a strike-slip fault with moderate length, implying that supershear rupture might commonly occur on large strike-slip earthquakes. The common occurrence of supershear rupture on strike-slip earthquakes will challenge present understanding of crack physics, as well as strong ground motion evaluation in earthquake engineering.  相似文献   

4.
Seismicity constraints on stress regimes along Sinai subplate boundaries   总被引：1，自引：0，他引：1  
The relative movement between African, Arabian and Eurasian plates has significantly controlled the tectonic process of Sinai subplate region, although its kinematics and precise boundaries are still doubtful. The respective subplate bounded on both sides by the Aqaba-Dead Sea transform fault to the east and the Gulf of Suez, the only defined part, to the west. Seismicity parameters, moment magnitude relation and fault plane solutions were combined to determine the active tectonics along the aforementioned boundaries. Seven shallow seismogenic zones were defined by the heterogeneity in stress field orientations. Along the eastern boundary, the average fault plane solution obtained from the moment tensor summation (MTS) reveals a sinistral strike-slip faulting mechanism. The corresponding seismic strain rate tensor showed that the present tectonic stress producing earthquakes along the boundary is dominated by both NW-SE compression and NE-SW dilatation. Towards the north, the average focal mechanism showed a normal faulting mechanism of N185°E compression and an N94°E extension in the Carmel Fairi seismic zone. On the other hand, the active crustal deformation along the western boundary (Gulf of Suez region) showed a prevailing tensional stress regime of NE to ENE orientations; producing an average fault plane solution of normal faulting mechanism. The seismic strain rate tensor reveals a dominant stress regime of N58°E extension and N145°E compression in consistence with the general tectonic nature in northeastern Africa. Finally, the extensional to strike-slip stress regimes obtained in the present study emphasize that the deformation accommodated along the Sinai subplate boundaries are in consistence with the kinematics models along the plate boundaries representing the northern extremity part of the Red Sea region.  相似文献   

5.
Aftershocks of the 2011 Tohoku-Oki great earthquake have a wide range of focal depths and fault plane mechanisms. We constrain the focal depths and focal mechanisms of 69 aftershocks with M w > 5.4 by modeling the waveforms of teleseismic P and its trailing near-surface reflections pP and sP. We find that the “thrust events” are within 10 km from the plate interface. The dip angles of these thrust events increase with depth from ~5° to ~25°. The “non-thrust events” vary from 60 km above to 40 km below the plate interface. Normal and strike-slip events within the overriding plate point to redistribution of stress following the primary great earthquake; however, due to the spatially variable stress change in the Tohoku-Oki earthquake, an understanding of how the mainshock affected the stresses that led to the aftershocks requires accurate knowledge of the aftershock location.  相似文献   

6.
2012年11月20日在宁夏银川市永宁县与兴庆区交界处发生MS4.6地震,为了更好地了解此次地震的发震构造,首先采用Hypo2000绝对定位方法得到该地震的震中位置及余震分布;然后采用CAP方法反演了此次地震的震源机制解和震源深度. 反演结果表明,永宁MS4.6地震是一个带有少量逆冲分量的右旋走滑地震.该地震矩震级为MW4.3,最佳双力偶解为:节面Ⅰ走向11°,倾角74°,滑动角171°;节面Ⅱ走向103°,倾角81°,滑动角16°.最佳震源深度为8km左右.从该地震震中和震源机制解以及震源深度剖面分布来看,这次地震很可能发生在银川隐伏主断层西侧的次级断层上.   相似文献   

7.
龙门山断裂带沿倾向和走向具有明显的分带性和分段性特征,通常以4条主干断裂为界将龙门山断裂带自西向东分为5条构造带,但是对沿走向的分段性特征仍未达成共识.本文利用四川区域地震台网记录的汶川地震后近10年的波形数据,采用全波形反演获取了龙门山断裂带1495个M≥3的震源机制解.通过“滑动窗”扫描方法提取不同地震类型的数量沿龙门山断裂带走向的变化曲线,据此将龙门山断裂带的震源区划分为S1—S9段.根据反演的震源机制解,进一步采用阻尼线性反演技术求取龙门山断裂带高分辨率的构造应力场信息,从地震类型、断面结构和构造应力场等角度探讨龙门山断裂带的分段性特征.结果表明:(1)地震类型存在明显的分段性特征.其中S1的逆冲型地震比例最高,S8的走滑型地震比例最高,S9的正断型地震比例最高.汶川地震后龙门山断裂带可能存在差异性断层调整运动,且余震晚期沿断裂带走向普遍存在应力的补充和协调,芦山地震的发生可能还对S2造成了应力扰动.汶川主震附近及余震区远端经历了更长的震后调整过程,且余震区远端S9具有更复杂、强度更高的震后调整过程.(2)断面结构存在明显的分段性特征.断面结构揭示汶川主震附近和余震区远端的隐伏断裂,以及虎牙断裂南端参与了汶川余震活动.断面倾角与走滑分量具有较好的一致性,在具有明显逆冲分量的分段断面倾角主要分布在50°~70°,而在具有明显走滑分量的分段断面倾角基本在60°以上,且断面倾角增大与汶川余震带宽度收缩变窄相吻合.(3)龙门山断裂带的应力环境非常复杂.σ1方向的分段性差异导致了汶川—芦山地震空区的地壳撕裂和地幔物质上涌、汶川主震附近和余震区远端的隐伏断裂活动以及虎牙断裂南端大量的逆冲型地震.结合构造应力场与大地测量资料认为,龙门山的隆升主要是受构造应力场作用下的上地壳缩短增厚所致.  相似文献   

8.
The focal mechanism solution of the Shiqu MS 4.4 earthquake occurred on May 16th, 2017 in Sichuan Province is studied by the gCAP method using the waveform data from the regional seismic networks in Sichuan, Qinghai, Tibet and Gansu provinces. The strike/dip/dipping angle of the first nodal plane are 214°/80°/167° and those of the second nodal plane are 306°/77°/10°, the optimal centroid depth is 7.3 ​± ​0.6 ​km and the moment magnitude is MW 4.5. Furthermore, the study investigates the robustness of the results against the error of crustal velocity structure, location, data quality and difference of seismic parameters, subsequently obtaining a stable resolved focal mechanism. According to the geological structure in the seismogenic area, spatial distribution of aftershock sequenceof the regional tectonic stress field, and the focal mechanism of the main shock, we suggest that the Shiqu earthquake is induced by a left-lateral strike-slip mechanism and the second nodal plane is inferred to be the seismogenic fault, consistent with the geometry of the Changshagongma fault which is the secondary fault of the northwest part of the Xianshuihe fault zone.  相似文献   

9.
2014年3月27日和30日湖北秭归县发生了三峡水库蓄水以来该地区最大的2次地震,文中通过多种方法分析了2次地震的震源与发震构造特征。采用Kiwi方法反演2次地震的矩张量解,该方法中使用了湖北和重庆测震台网14个宽频带波形记录和6层地壳速度结构模型,反演结果显示,2次地震观测谱和波形与理论谱和波形拟合得比较好,非拟合误差数0.57,表明反演结果是可靠的。2次地震均为走滑兼少量逆冲错动,但前一地震为左旋走滑,后一地震为右旋走滑,矩张量解中DC成分偏少而ISO成分多可能是库水对地下介质物性影响的反映。同时也使用三峡台网15个子台记录的波形资料,采用双差定位法重新精定位了从3月27日至4月27日时段内超过500次地震序列事件,结果显示余震序列分布方向为NNW向和NE向,但主要集中在NE向,并分别沿NNW和NE向作了深度剖面,剖面显示震源深度为4.5~10.0km,余震在深部呈现2个较明显的断面,与震源机制解NE向节面产状一致。野外现场宏观烈度调查指出,Ⅴ度极震区等震线为一椭圆,长轴NWW向,短轴NE向,结合野外现场考察结果和震源区地质构造背景,综合推断仙女山断裂北端的NE向破裂面为2次地震的发震断面,余震序列的NE和NNW向分布、剖面上发震层的形态和深度特征表明,这次地震活动受到了仙女山断裂和九畹溪断裂活动的控制与影响。  相似文献   

10.
杨帆  盛书中  胡晓辉  崔华伟 《地震》2021,41(4):93-105
基于国家测震台网数据中心提供的波形资料, 采用gCAP方法反演2020年5月18日云南巧家M5.0地震及研究区域51次地震震源机制解, 并收集研究区域震源机制解50个。 采用网格搜索法反演区域构造应力场, 并对研究区域采用不同划分进行应力场反演。 获得以下结论: ① 主震震源机制解节面Ⅰ的走向、 倾角和滑动角分别为175°、 67°和-19°, 节面Ⅱ的走向、 倾角和滑动角分别为273°、 73°和-156°, 矩震级为4.97, 矩心深度为8.8 km。 表明主震属于兼具逆冲分量的走滑型地震; ② 震后区域应力场主压应力轴方位为NWW, 倾角接近水平, 主张应力轴方位为NNE, 倾角接近水平, 属于走滑型应力状态, 与周边地质构造运动状态相吻合; ③ 对研究区域采用不同划分所得应力场结果相差不大, 表明该区域应力场比较稳定, 受深大断裂带和震源机制解类型影响较小。  相似文献   

11.
2014年3月10日13时18分(北京时间)美国加利福尼亚州西北岸发生Mw6.9级地震,震中位于戈尔达板块内部.本文利用国际地震学研究联合会(IRIS)地震数据中心提供的远场体波数据,通过波形反演的方法来研究此次地震的震源破裂过程,并分析未造成重大人员伤亡及诱发海啸的原因,为该地区地球动力学的研究提供依据.选取19个方位角覆盖均匀的远场P波垂向波形记录和13个近场P波初动符号进行约束,基于剪切位错点源模型确定此次地震的震源机制解.结合地质构造背景资料,确定断层破裂面的走向.在考虑海水层多次反射效应的影响下,采用18个远场P波垂向波形数据和21个远场SH波切向波形数据,利用有限断层模型,将断层面剖分为17×9块子断层单元来模拟破裂面上滑动的时空分布,通过波形反演的方法获得此次地震的震源破裂过程.利用海水层地壳模型,剪切位错点源模型的反演结果为:走向323°,倾角86.1°,滑动角-180°,震源深度为10.6km.有限断层模型的反演结果表明,此次地震的破裂过程相对简单,主要滑动量集中于震源上方35km×9km的区域内,破裂时间持续19s左右,平均破裂传播速度约为2.7km·s-1,较大滑动量均沿着走向分布,最大滑动量为249cm.此次地震为发生在戈尔达板块内部的一次Mw6.9级的陡倾角走滑型地震.此次地震为单纯的走滑型地震,断层面接近竖直方向,且发生在洋壳底部,因此破坏力不大,不会对沿岸城市造成重大损失.陡倾角断层在走滑错动的过程中不会使海底地形发生大幅度变化,不会引起大面积水体的突然升降,因此不会诱发大规模海啸.  相似文献   

12.
Using the digital broadband seismic data recorded by Xinjiang network stations, we obtained focal mechanism of the July 3 Pishan, Xinjiang, MS6.5 earthquake with generalized Cut and Paste(gCAP)inversion method. The strike, dip and rake of first nodal plane are 97°, 27°, 51°, and the second nodal plane are 318°, 70°, 107°. The centroid depth and moment magnitude are calculated to be 12km and 6.4. Combining with the distribution of aftershocks, we conclude that the first nodal plane is the seismogenic fault, and the main shock presents a thrust earthquake at low angle. We relocated 1014 earthquakes using the double-difference algorithm, and finally obtained 937 relocated events. Our results show that the earthquake sequences clearly demonstrate a unilateral extension about 50km nearly in NWW direction, and are mainly located above 25km depth, especially the small earthquakes are predominately located at the shallow parts. Furthermore, the focal depth profile shows a southwestward dipping fault plane at the main shock position, suggesting listric thrust faulting, which is consistent with the dip of the mainshock rupture plane. The spatial distribution of aftershocks represents that the Tarim block was thrust under the West Kunlun orogenic belt. In addition, the dip angle of the fault plane gradually increases along the NWW direction, possibly suggesting a gradual increase of strike-slip component during the NWW rupturing process. From above, we conclude that the Pishan MS6.5 earthquake is the result of Tibet plateau pushing onto the Tarim block from south to north, which further confirms that the continuous collision of India plate and Eurasia plate has strong influence on the seismic activity in and around the Tibet plateau.  相似文献   

13.
本文提出并试验了一种基于接收函数建立区域模型进行震源机制反演的方法.选取四川地震台网记录的M≥3且信噪比高的近震波形资料,反演得到了芦山地震序列中74个地震的震源机制.通过对震源深度和震源机制的综合分析,探讨了芦山地震的发震构造和区域应力场状态.采用接收函数方法反演获取了26个台站下方的S波速度结构,对不同区域的台站反演结果进行叠加平均,以此区域平均S波速度作为本文震源机制反演使用的区域模型的S波速度;区域模型的P波速度由经验公式给出.反演稳定性测试表明,使用不同模型或对原始波形记录加入随机噪声的反演结果与原始反演相比,震源深度最大误差为1km,断层面各参数误差水平也很低,且显示的发震类型是一致的,其中随机噪声带来的误差小于模型带来的误差.主震反演得到的震源机制解为:震源深度17km,矩震级6.47;节面Ⅰ走向213°,倾角51°,滑动角98°;节面Ⅱ走向20°,倾角40°,滑动角80°;显示芦山主震可视为纯逆冲型地震,发震构造可能是某个具有较大倾角的逆冲断层,而不是低缓的推覆构造的基底滑脱面.同时本文反演获取的73个M≥3余震的震源机制绝大多数也显示了类似的发震类型,逆冲型地震为67个,占92%,具有绝对优势;走滑型地震为5个,正断型地震为1个.其中5个走滑型地震中的4个均分布在震源区的东北端.整个芦山地震序列深度集中在12~20km,且沿震源区短轴的余震深度剖面有自西向东呈逐步变浅的趋势,呈现清晰的铲形断面结构,结合本地地质构造,可以推断芦山地震序列主要发生在龙门山前山断裂以东的逆冲推覆体内的一个隐伏断裂上.P轴方位角优势方位与区域应力场及汶川震源区南段的相一致,表明芦山序列地震活动主要受区域应力场控制,且汶川震后该区应该不存在应力场变化.P轴仰角随深度分布则显示了孕震层在浅部为脆性上地壳,而深部已经进入了中地壳低速层.断层面的几何形态简单,倾角均值在不同深度保持稳定在55°左右,与主震倾角接近,这与汶川震源区南段的研究结果明显不同,揭示了龙门山断裂带南段与此次芦山发震断裂在断层面几何形态上的明显差异.  相似文献   

14.
The Bob-Tangol earthquake of magnitude 5.8 (MS), occurred in southeastern Iran on 19 December 1977, not far from the region where the 1896 and 1933 earthquakes caused considerable damage and destruction. The shock was associated with a 19.5-km fault break at the surface with a maximum 20 cm right-lateral strike-slip movement along an Early Quaternary geological fault. Results of the field investigation together with the fault plane solution and epicentre location of the main shock are presented here in order to give a seismotectonic view of the event.Surface rupture and fault plane solution of this medium-magnitude earthquake demonstrate a considerable amount of right-lateral movement along a major Early Quaternary high-angle reverse fault. This change in fault behaviour and slip vector may indicate that evidence of Early Quaternary movement cannot always provide a good clue to present-day crustal deformation.  相似文献   

15.
On January 21 2016, an earthquake of MS6.4 hit the Lenglongling fault zone(LLLFZ)in the NE Tibetan plateau, which has a contrary focal mechanism solution to the Ms 6.4 earthquake occurring in 1986. Fault behaviors of both earthquakes in 1986 and 2016 are also quite different from the left-lateral strike-slip pattern of the Lenglongling fault zone. In order to find out the seismogenic structure of both earthquakes and figure out relationships among the two earthquakes and the LLLFZ, InSAR co-seismic deformation map is constructed by Sentinel -1A data. Moreover, the geological map, remote sensing images, relocation of aftershocks and GPS data are also combined in the research. The InSAR results indicate that the co-seismic deformation fields are distributed on both sides of the branch fault(F2)on the northwest of the Lenglongling main fault(F1), where the Earth's surface uplifts like a tent during the 2016 earthquake. The 2016 and 1986 earthquakes occurred on the eastern and western bending segments of the F2 respectively, where the two parts of the F2 bend gradually and finally join with the F1. The intersections between the F1 and F2 compose the right-order and left-order alignments in the planar geometry, which lead to the restraining bend and releasing bend because of the left-lateral strike-slip movement, respectively. Therefore, the thrust and normal faults are formed in the two bending positions. In consequence, the focal mechanism solutions of the 2016 and 1986 earthquakes mainly present the compression and tensional behaviors, respectively, both of which also behave as slight strike-slip motion. All results indicate that seismic activity and tectonic deformation of the LLLFZ play important parts in the Qilian-Haiyuan tectonic zone, as well as in the NE Tibetan plateau. The complicated tectonic deformation of NE Tibetan plateau results from the collisions from three different directions between the north Eurasian plate, the east Pacific plate and the southwest Indian plate. The intensive tectonic movement leads to a series of left-lateral strike-slip faults in this region and the tectonic deformation direction rotates clockwise gradually to the east along the Qilian-Haiyuan tectonic zone. The Menyuan earthquake makes it very important to reevaluate the earthquake risk of this region.  相似文献   

16.
2008年6月10日14时5分,内蒙古鄂伦春自治旗发生M5.2地震,该地震处于大兴安岭梯度带北段,是内蒙古东北部地区近年来发生的最大地震。基于内蒙古地震台网观测资料,使用TDMT方法、CAP方法、PTD方法和sPn-Pn等方法测定此次地震的震源机制解和震源深度。结合已有数据资料,分析震源区域地震的时空分布特征和构造应力特征,并探讨该地震的发震构造。此次地震震源深度较浅,位于上地壳,结合震源机制解结果、地震分布特征和构造背景分析认为,此次地震为右旋走滑类型,走向NNE,主压应力方向为SWW。  相似文献   

17.
At GMT time 13:19, August 8, 2017, an Ms7.0 earthquake struck the Jiuzhaigou region in Sichuan Province, China, causing severe damages and casualties. To investigate the source properties, seismogenic structures, and seismic hazards, we systematically analyzed the tectonic environment, crustal velocity structure in the source region, source parameters and rupture process, Coulomb failure stress changes, and 3-D features of the rupture plane of the Jiuzhaigou earthquake. Our results indicate the following: (1) The Jiuzhaigou earthquake occurred on an unmarked fault belonging to the transition zone of the east Kunlun fault system and is located northwest of the Huya fault. (2) Both the mainshock and aftershock rupture zones are located in a region where crustal seismic velocity changes dramatically. Southeast to the source region, shear wave velocity at the middle to lower crust is significantly low, but it rapidly increases northeastward and lies close to the background velocity across the rupture fault. (3) The aftershock zone is narrow and distributes along the northwest-southeast trend, and most aftershocks occur within a depth range of 5–20 km. (4) The focal mechanism of the Jiuzhaigou earthquake indicates a left-lateral strike-slip fault, with strike, dip, and rake angles of 152°, 74° and 8°, respectively. The hypocenter depth measures 20 km, whereas the centroid depth is about 6 km. The co-seismic rupture mainly concentrates at depths of 3–13 km, with a moment magnitude (Mw) of 6.5. (5) The co-seismic rupture also strengthens the Coulomb failure stress at the two ends of the rupture fault and the east segment of the Tazang fault. Aftershocks relocation results together with geological surveys indicate that the causative fault is a near vertical fault with notable spatial variations: dip angle varies within 66°–89° from northwest to southeast and the average dip angle measures ~84°. The results of this work are of fundamental importance for further studies on the source characteristics, tectonic environment, and seismic hazard evaluation of the Jiuzhaigou earthquake.  相似文献   

18.
本文利用福建省地震台网、广东省地震台网和台湾"中央"气象局17个台的宽频带记录,使用CAP方法反演了2018年11月26日台湾海峡M_S6.2地震震源机制解,得到节面1走向/倾角/滑动角为89°/82°/-173°,节面2走向/倾角/滑动角为358°/84°/-7°,最佳拟合深度14km,矩震级5.8.使用双差定位获取了94个M_L2.0以上地震的精定位结果,结果显示,主震位于北纬23.36°,东经118.62°,震源深度10.43km.根据小震分布和构造应力场反演得到余震断层面走向和倾角分别为88°和60°.研究认为,台湾海峡6.2级地震发震构造为近EW向的台湾浅滩断裂,受南海板块张裂拉伸发育而成,孕震过程中有东山隆起东缘断裂的参与,推测在菲律宾板块对欧亚板块NW-SE向挤压碰撞背景下,近EW向的台湾浅滩断裂与近NS向的东山隆起东缘断裂交接部位属于强度薄弱区,最终产生高倾角右旋走滑错动而引发地震,余震主要沿台湾浅滩断裂分布.  相似文献   

19.
华北强烈地震深部构造环境的探测与研究   总被引：6，自引：1，他引：5  
20世纪六七十年代以来, 华北地区发生了一系列强烈地震． 强烈地震的孕育、 发生和发展与深部构造密切相关． 近50年来, 我国地震科学领域在强烈地震的地震构造和深部环境方面开展了大量的研究． 深部地球物理探测和地震层析成像结果揭示了华北地区地壳结构的基本特征, 并在强烈地震发生的深部构造环境等问题上取得了重要进展． 本文在回顾华北地区地壳上地幔结构探测的基础上, 对1966年邢台MS7.2, 1976年唐山MS7.8, 1975年海城MS7.3和1679年三河—平谷M8.0地震的地震构造和深部构造环境进行评述． 深部地球物理数据的综合分析表明, 震源下方的低速异常带, 高角度超壳深断裂, 地壳深浅构造的不一致, 偏低的上地幔顶部速度和局部隆起的莫霍界面, 是华北伸展构造区深部孕震环境的共同特征．   相似文献   

20.
IntroductionIt has been brought forward in the plate tectonic theory that the global lithosphere consists of a number of active blocks floating above the asthenosphere since 1960s. And from then on, the kinematics and dynamics of lithosphere have been the frontal subjects in the contemporary geoscientific study. The Pacific Plate is the biggest one covering one fourth of the earth surface. Situated in the Eurasia Plate, our country is affected directly by the compression from the Pacific Pl…  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号