首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
《Basin Research》2018,30(5):926-941
Constraining the thermal, burial and uplift/exhumation history of sedimentary basins is crucial in the understanding of upper crustal strain evolution and also has implications for understanding the nature and timing of hydrocarbon maturation and migration. In this study, we use Vitrinite Reflectance (VR) data to elucidate the paleo‐physiography and thermal history of an inverted basin in the foreland of the Atlasic orogeny in Northern Tunisia. In doing so, it is the primary aim of this study to demonstrate how VR techniques may be applied to unravel basin subsidence/uplift history of structural domains and provide valuable insights into the kinematic evolution of sedimentary basins. VR measurements of both the onshore Pelagian Platform and the Tunisian Furrow in Northern Tunisia are used to impose constraints on the deformation history of a long‐lived structural feature in the studied region, namely the Zaghouan Fault. Previous work has shown that this fault was active as an extensional structure in Lower Jurassic to Aptian times, before subsequently being inverted during the Late Cretaceous Eocene Atlas I tectonic event and Upper Miocene Atlas II tectonic event. Quantifying and constraining this latter inversion stage, and shedding light on the roles of structural inheritance and the basin thermal history, are secondary aims of this study. The results of this study show that the Atlas II WNW‐ESE compressive event deformed both the Pelagian Platform and the Tunisian Furrow during Tortonian‐Messinian times. Maximum burial depth for the Pelagian Platform was reached during the Middle to Upper Miocene, i.e. prior to the Atlas II folding event. VR measurements indicate that the Cretaceous to Ypresian section of the Pelagian Platform was buried to a maximum burial depth of ~3 km, using a geothermal gradient of 30°C/km. Cretaceous rock samples VR values show that the hanging wall of the Zaghouan Fault was buried to a maximum depth of <2 km. This suggests that a vertical km‐scale throw along the Zaghouan Fault pre‐dated the Atlas II shortening, and also proves that the fault controlled the subsidence of the Pelagian Platform during the Oligo‐Miocene. Mean exhumation rates of the Pelagian Platform throughout the Messinian to Quaternary were in the order of 0.3 mm/year. However, when the additional effect of Tortonian‐Messinian folding is accounted for, exhumation rates could have reached 0.6–0.7 mm/year.  相似文献   

2.
Careful assessment of basin thermal history is critical to modelling petroleum generation in sedimentary basins. In this paper, we propose a novel approach to constraining basin thermal history using palaeoclimate temperature reconstructions and study its impact on estimating source rock maturation and hydrocarbon generation in a terrestrial sedimentary basin. We compile mean annual temperature (MAT) estimates from macroflora assemblage data to capture past surface temperature variation for the Piceance Basin, a high‐elevation, intermontane, sedimentary basin in Colorado, USA. We use macroflora assemblage data to constrain the temporal evolution of the upper thermal boundary condition and to capture the temperature change with basin uplift. We compare these results with the case where the upper thermal boundary condition is based solely upon a simplified latitudinal temperature estimate with no elevation effect. For illustrative purposes, 2 one‐dimensional (1‐D) basin models are constructed using these two different upper thermal boundary condition scenarios and additional geological and geochemical input data in order to investigate the impact of the upper thermal boundary condition on petroleum source rock maturation and kerogen transformation processes. The basin model predictions indicate that the source rock maturation is very sensitive to the upper thermal boundary condition for terrestrial basins with variable elevation histories. The models show substantial differences in source rock maturation histories and kerogen transformation ratio over geologic time. Vitrinite reflectance decreases by 0.21%Ro, source rock transformation ratio decreases 10.5% and hydrocarbon mass generation decreases by 16% using the macroflora assemblage data. In addition, we find that by using the macroflora assemblage data, the modelled depth profiles of vitrinite reflectance better matches present‐day measurements. These differences demonstrate the importance of constraining thermal boundary conditions, which can be addressed by palaeotemperature reconstructions from palaeoclimate and palaeo‐elevation data for many terrestrial basins. Although the palaeotemperature reconstruction compiled for this study is region specific, the approach presented here is generally applicable for other terrestrial basin settings, particularly basins which have undergone substantial subaerial elevation change over time.  相似文献   

3.
We utilized carbonate clumped isotope thermometry to explore the thermal history of the Delaware Basin, West Texas, USA. Carbonate wellbore cuttings from five oil/gas wells across the basin yielded clumped isotope temperatures (T(Δ47)) ranging from 27°C to 307°C, interpreted to reflect a combination of initial precipitation/recrystallization temperature and solid-state C-O bond reordering during burial. Dolomite samples generally record lower apparent T(Δ47)s than calcite, reflecting greater resistance to reordering in dolomite. In all five wells, clumped isotope temperatures exceed modern downhole temperature measurements, indicating higher heat flow in the past. Using modelled burial curves based on sedimentological history, we created unique time-temperature histories by linearly applying a geothermal gradient. Applying two different thermal history reordering models, we modelled the extent of solid-state C–O bond reordering to iteratively find the time-averaged best-fit geothermal gradients for each of the five wells. Results of this modelling suggest that the shallower, southwestern portion of the study area experienced higher geothermal gradients throughout the sediment history (~45°C/km) than did the deeper, southeastern portion (~32°C/km), with the northern portion experiencing intermediate geothermal gradients (~35–38°C/km). This trend is in agreement with the observed gas/oil ratios of the Delaware Basin, increasing from east to west. Furthermore, our clumped isotope temperatures agree well with previously published vitrinite reflectance data, confirming previous observations and demonstrating the utility of carbonate clumped isotope thermometry to reconstruct basin thermal histories.  相似文献   

4.
《Basin Research》2018,30(Z1):497-512
Shale of the Upper Cretaceous Slater River Formation extends across the Mackenzie Plain of the Canadian Northwest Territories and has potential as a regional source rock because of the high organic content and presence of both oil‐ and gas‐prone kerogen. An understanding of the thermal history experienced by the shale is required to predict any potential petroleum systems. Our study integrates multi‐kinetic apatite fission track (AFT) and apatite (U‐Th)/He (AHe) thermochronometers from a basal bentonite unit to understand the timing and magnitude of Late Cretaceous burial experienced by the Slater River Formation along the Imperial River. We use LA‐ICP‐MS and EPMA methods to assess the chemistry of apatite, and use these values to derive the AFT kinetic parameter rmr0. Our AFT dates and track lengths, respectively, range from 201.5 ± 36.9 Ma to 47.1 ± 12.3 Ma, and 16.8 to 10.2 μm, and single crystal AHe dates are between 57.9 ± 3.5 and 42.0 ± 2.5 Ma with effective uranium concentrations from 17 ppm to 36 ppm. The fission track data show no relationship with the kinetic parameter Dpar and fail the χ2‐test indicating that the data do not comprise a single statistically significant population. However, when plotted against their rmr0 value, the data are separated into two statistically significant kinetic populations with distinct track length distributions. Inverse thermal history modelling of both the multi‐kinetic AFT and AHe datasets, reveal that the Slater River Formation reached maximum burial temperatures of ~65–90 °C between the Turonian and Paleocene, indicating that the source rock matured to the early stages of hydrocarbon generation, at best. Ultimately, our data highlight the importance of kinetic parameter choice for AFT and AHe thermochronology, as slight variations in apatite chemistry may have significant implications on fission track and radiation damage annealing in apatite with protracted thermal histories through the uppermost crust.  相似文献   

5.
Apatite fission‐track (AFT) thermochronology and (U‐Th)/He (AHe) dating, combined with paleothermometers and independent geologic constraints, are used to model the thermal history of Devonian Catskill delta wedge strata. The timing and rates of cooling determines the likely post‐orogenic exhumation history of the northern Appalachian Foreland Basin (NAB) in New York and Pennsylvania. AFT ages generally young from west to east, decreasing from ~185 to 120 Ma. AHe single‐grain ages range from ~188 to 116 Ma. Models show that this part of the Appalachian foreland basin experienced a non‐uniform, multi‐stage cooling history. Cooling rates vary over time, ~1–2 °C/Myr in the Early Jurassic to Early Cretaceous, ~0.15–0.25 °C/Myr from the Early Cretaceous to Late Cenozoic, and ~1–2 °C/Myr beginning in the Miocene. Our results from the Mesozoic are broadly consistent with earlier studies, but with the integration of multiple thermochronometers and multi‐kinetic annealing algorithms in newer inverse thermal modeling programs, we constrain a Late Cenozoic increase in cooling which had been previously enigmatic in eastern U.S. low‐temperature thermochronology datasets. Multi‐stage cooling and exhumation of the NAB is driven by post‐orogenic basin inversion and catchment drainage reorganization, in response to changes in base level due to rifting, plus isostatic and dynamic topographic processes modified by flexure over the long (~200 Myr) post‐orogenic period. This study compliments other regional exhumation data‐sets, while constraining the timing of post‐orogenic cooling and exhumation in the NAB and contributing important insights on the post‐orogenic development and inversion of foreland basins along passive margins.  相似文献   

6.
Assessing the thermal evolution of sedimentary basins over time is a major aspect of modern integrated basin analysis. While the behavior of clay minerals and organic matter with increasing burial is well documented in different geological and thermal settings, these methods are often limited by the temperature ranges over which they can be precisely applied and by the available material. Here, we explore the emergent Δ47 clumped isotope geospeedometry (based on the diffusional redistribution of carbon and oxygen isotopes in the carbonate lattice at elevated temperatures) to refine time‐temperature paths of carbonate rocks during their burial evolution. This study provides a reconstruction of the thermal and exhumation history of the Upper Cretaceous thrust belt series in the western subalpine massifs (Bauges and Bornes, French Alps) by a new approach combining for the first time available data from three independent geothermometers. The investigated area presents two zones affected by contrasting thermal histories. The most external zone has undergone a relatively mild thermal history (T < 70°C) and does not record any significant clay mineral diagenetic transformation. By contrast, the internal zone has experienced tectonic burial (prealpine nappes) in response to thrusting, resulting in overheating (T > 160–180°C) that induced widespread clay mineral diagenetic transformations (progressive illitization from R0 to R1 and R3 illite‐smectite mixed‐layers), organic matter maturation (oil window) and Δ47 thermal resetting with apparent equilibrium temperatures above 160°C. The three employed geothermal indicators conjointly reveal that the investigated Upper Cretaceous rocks have suffered a wide range of burial temperatures since their deposition, with a thermal maximum locally up to 160–180°C. High temperatures are associated with the tectonic emplacement of up to 4 km of prealpine nappes in the northern part of the studied area. Finally, a forward thermal modeling using Δ47, vitrinite reflectance and clay mineral data, is attempted to precisely refine the burial and exhumation histories of this area.  相似文献   

7.
The syntectonic continental conglomerates of the South‐Central Pyrenees record the late stages of thin‐skinned transport of the South‐Pyrenean Central Units and the onset of exhumation of the Pyrenean Axial Zone (AZ) in the core of the orogen. New magnetostratigraphic data of these syntectonic continental conglomerates have established their age as Late Lutetian to Late Oligocene. The data reveal that these materials were deposited during intense periods of tectonic activity of the Pyrenean chain and not during the cessation of the deformation as considered previously. The magnetostratigraphic ages have been combined with new detrital apatite fission track (AFT) thermochronology from AZ‐derived granite cobbles within the syntectonic conglomerates. Distribution of the granitic cobbles with different AFT ages and track lengths combined with their depositional ages reveal information on the timing and rate of episodes of exhumation in the orogen. Some AFT ages are considerably older than the AFT ages of the outcropping AZ granitic massifs, indicating erosion from higher crustal levels within the massifs than presently exposed or from completely eroded plutons. Inverse thermal modelling reveals two well‐defined periods of rapid cooling in the hinterland at ca. 50–40 and ca. 30–25 Ma, with another poorly defined cooling episode at ca. 70–60 Ma. The lowest stratigraphic samples experienced postburial annealing caused by the deposition of younger syntectonic sediments during progressive burial of the south Pyrenean thrust and fold belt. Moreover, samples from the deeper stratigraphic levels also reveal postorogenic cooling during the Late Miocene as a response to the excavation of the Ebro River towards the Mediterranean Sea. Our data strongly support previous ideas about the burial of the South Pyrenean fold and thrust belt by Late Palaeogene syntectonic conglomerates and their subsequent re‐excavation and are consistent with other thermochronological data and thermal modelling from the interior part of the orogen.  相似文献   

8.
Regional spherical coordinate observations of the Earth's crustal magnetic field components are becoming increasingly available from shipborne, airborne, and satellite surveys. In assessing the geological significance of these data, theoretical anomalous magnetic fields from geologic models in spherical coordinates need to be evaluated. This study explicitly develops the elegant Gauss–Legendre quadrature formulation for numerically modelling the complete magnetic effects (i.e. potential, vector and tensor gradient fields) of the spherical prism. We also use these results to demonstrate the magnetic effects for the crustal prism and to investigate the crustal magnetic effects at satellite altitudes for a large region of the Middle East centred on Iran.  相似文献   

9.
Three‐dimensional (3D) numerical modelling of fault displacement enables the building of geological models to represent the complex 3D geometry and geological properties of faulted sedimentary basins. Using these models, cross‐fault juxtaposition relationships are predicted in 3D space and through time, based on the geometries of strata that are cut by faults. Forward modelling of fault development allows a 3D prediction of fault‐zone argillaceous smear using a 3D application of the Shale Gouge Ratio. Numerical models of the Artemis Field, Southern North Sea, UK and the Moab Fault, Utah, USA are used to demonstrate the developed techniques and compare them to traditional one‐ and two‐dimensional solutions. These examples demonstrate that a 3D analysis leads to significant improvements in the prediction of fault seal, the analysis of the interaction of the sealing properties of multiple faults, and the interpretation of fault seal within the context of sedimentary basin geometry.  相似文献   

10.
The central and southern Perth Basin in southwestern Australia has a geological history involving multiple regional unconformity‐forming events from the Permian to Recent. This study uses sonic transit time analysis to quantify the magnitudes of net and gross exhumation for four stratigraphic periods from 43 wells. Most importantly, we quantify gross exhumation of the Permian–Triassic, Triassic–Jurassic, Valanginian break‐up and post‐Early Cretaceous events. Post‐Early Cretaceous gross exhumation averages 900‐m offshore and 600‐m onshore. Up to 200 m of this exhumation may be attributed to localized fault block rotation during extension in the Late Cretaceous and/or reverse fault re‐activation due to the compressive stresses in Australia in the last 50 Ma. The remainder is attributed to regional exhumation caused by epeirogenic processes either during the Cenozoic or at the Aptian–Albian boundary. Maximum burial depths prior to the Valanginian unconformity‐forming event were less than those reached subsequently, so that the magnitude of Valanginian break‐up exhumation cannot be accurately quantified. Gross exhumation prior to the break‐up of Gondwana was defined by large magnitude differences (up to 2500 m) between adjoining sub‐basins. At the end of Triassic, exhumation is primarily attributed to reverse re‐activation of faults that were driven by short‐wavelength inversion and exhumation at the end Permian is likely caused by uplift of rotated fault blocks during extension. The evidence from quantitative exhumation analysis indicates a switch in regime, from locally heterogeneous before break‐up to more regionally homogeneous after break‐up.  相似文献   

11.
The late‐stage evolution of the southern central Pyrenees has been well documented but controversies remain concerning potential Neogene acceleration of exhumation rates and the influence of tectonic and/or climatic processes. A popular model suggests that the Pyrenees and their southern foreland were buried below a thick succession of conglomerates during the Oligocene, when the basin was endorheic. However, both the amount of post‐orogenic fill and the timing of re‐excavation remain controversial. We address this question by revisiting extensive thermochronological datasets of the Axial Zone. We use an inverse approach that couples the thermo‐kinematic model Pecube and the Neighbourhood inversion algorithm to constrain the history of exhumation and topographic changes since 40 Ma. By comparison with independent geological data, we identified a most probable scenario involving rapid exhumation (>2.5 km Myr?1) between 37 and 30 Ma followed by a strong decrease to very slow rates (0.02 km Myr?1) that remain constant until the present. Therefore, the inversion does not require a previously inferred Pliocene acceleration in regional exhumation rates. A clear topographic signal emerges, however: the topography has to be infilled by conglomerates to an elevation of 2.6 km between 40 and 29 Ma and then to remain stable until ca. 9 Ma. We interpret the last stage of the topographic history as recording major incision of the southern Pyrenean wedge, due to the Ebro basin connection to the Mediterranean, well before previously suggested Messinian ages. These results thus demonstrate temporally varying controls of different processes on exhumation: rapid rock uplift in an active orogen during late Eocene, whereas base‐level changes in the foreland basin control the post‐orogenic evolution of topography and exhumation in the central Pyrenees. In contrast, climate changes appear to play a lesser role in the post‐orogenic topographic and erosional evolution of this mountain belt.  相似文献   

12.
Fluid inclusion homogenization temperatures and three‐dimensional hydro‐thermo‐mechanical modelling were combined to constrain fluid flow, solute and heat transport in the Paris basin, France, focusing on the two main petroleum reservoirs i.e. the Dogger and the Triassic (Keuper) formations. The average homogenization temperatures of two‐phase aqueous inclusions in different samples range from 66 °C to 88 °C in the Dogger calcite cement, from 106 °C to 118 °C in the Keuper dolomite cement and from 89 °C to 126 °C in the Keuper quartz and K‐feldspar cements. The maximum homogenization temperatures for inclusions in the Keuper quartz and K‐feldspar cements were 17–47 °C higher than present‐day temperatures in the boreholes at similar depths. Processes that might explain higher temperatures in the past were examined through numerical simulations and sensitivity tests. A warmer climate in the Late Cretaceous–Early Tertiary resulted in a temperature rise of only 8 °C. Late Cretaceous chalk had a thermal blanketing effect that resulted in simulated temperatures as high as 15–20 °C above the present day ones. An additional 300 m deposition and subsequent erosion of chalk, not taken into account so far, has to be considered to simulate the high palaeo‐temperatures recorded by fluid inclusions in both reservoirs. In view of the simulated thermal history of the basin, in the Keuper, an age of about 85 Ma is consistent with quartz/K‐feldspar temperatures and an age of about 65 Ma is in agreement with the precipitation temperature of the dolomite cement. Our models suggest an age of about 50 Ma for the Dogger calcite cementation.  相似文献   

13.
The Cooper–Eromanga Basins of South Australia and Queensland are not at their maximum burial depth due to Late Cretaceous–Tertiary, and Late Triassic–Early Jurassic exhumation. Apparent exhumation (maximum burial depth–present burial depth) for the Cooper Basin has been quantified using the compaction methodology. The results show that exhumation of the Cooper Basin for the majority of the wells is greater than the exhumation of the Eromanga Basin. Using the compaction methodology, apparent exhumation of Early to Middle Triassic age Arrabury and Tinchoo Formatios has been quantified. Both units yield similar results and do not support that the Arrabury/Tinchoo boundary represents the Cooper–Eromanga boundary. Hence, the Cooper Basin is believed to have reached its maximum burial depth in Late Triassic times. Sonic log data are not available for the units overlying the Late Cretaceous Winton Formation; thus, it is not possible to date exhumation beyond the Late Cretaceous–Tertiary using the compaction methodology. Tertiary sequences as are preserved are relatively thin and separated by marked unconformities and weathered surfaces; hence, exhumation rather than sedimentation dominated the Tertiary, and in exhumed areas, maximum burial depth was attained in Late Cretaceous times. The burial/exhumation history of representative wells was synthesized using sediment decompaction and establishing porosity/depth relations for the Cooper–Eromanga units. Considering the relative significance of the major periods of exhumation in the Cooper/Eromanga Basins, three broad types of burial/exhumation histories can be distinguished. Maximum burial depth of the Cooper Basin sequence was attained before the deposition of the Eromanga Basin sequence, i.e. Late Triassic–Early Jurassic times; maximum burial depth of the Cooper and Eromanga Basin sequences attained in Late Cretaceous times; and Cooper and Eromanga Basin sequences are currently at maximum burial‐depth. Incorporation of exhumation into burial history has major implications for hydrocarbon exploration.  相似文献   

14.
《Basin Research》2018,30(3):564-585
Studies in both modern and ancient Cordilleran‐type orogenic systems suggest that processes associated with flat‐slab subduction control the geological and thermal history of the upper plate; however, these effects prove difficult to deconvolve from processes associated with normal subduction in an active orogenic system. We present new geochronological and thermochronological data from four depositional areas in the western Sierras Pampeanas above the Central Andean flat‐slab subduction zone between 27° S and 30° S evaluating the spatial and temporal thermal conditions of the Miocene–Pliocene foreland basin. Our results show that a relatively high late Miocene–early Pliocene geothermal gradient of 25–35 °C km−1 was typical of this region. The absence of along‐strike geothermal heterogeneities, as would be expected in the case of migrating flat‐slab subduction, suggests that either the response of the upper plate to refrigeration may be delayed by several millions of years or that subduction occurred normally throughout this region through the late Miocene. Exhumation of the foreland basin occurred nearly synchronously along strike from 27 to 30° S between ca. 7 Ma and 4 Ma. We propose that coincident flat‐slab subduction facilitated this wide‐spread exhumation event. Flexural modelling coupled with geohistory analysis show that dynamic subsidence and/or uplift associated with flat‐slab subduction is not required to explain the unique deep and narrow geometry of the foreland basin in the region implying that dynamic processes were a minor component in the creation of accommodation space during Miocene–Pliocene deposition.  相似文献   

15.
A Bayesian approach to inverse modelling of stratigraphy, part 1: method   总被引：2，自引：0，他引：2  
The inference of ancient environmental conditions from their preserved response in the sedimentary record still remains an outstanding issue in stratigraphy. Since the 1970s, conceptual stratigraphic models (e.g. sequence stratigraphy) based on the underlying assumption that accommodation space is the critical control on stratigraphic architecture have been widely used. Although these methods considered more recently other possible parameters such as sediment supply and transport efficiency, they still lack in taking into account the full range of possible parameters, processes, and their complex interactions that control stratigraphic architecture. In this contribution, we present a new quantitative method for the inference of key environmental parameters (specifically sediment supply and relative sea level) that control stratigraphy. The approach combines a fully non‐linear inversion scheme with a ‘process–response’ forward model of stratigraphy. We formulate the inverse problem using a Bayesian framework in order to sample the full range of possible solutions and explicitly build in prior geological knowledge. Our methodology combines Reversible Jump Markov chain Monte Carlo and Simulated Tempering algorithms which are able to deal with variable‐dimensional inverse problems and multi‐modal posterior probability distributions, respectively. The inverse scheme has been linked to a forward stratigraphic model, BARSIM (developed by Joep Storms, University of Delft), which simulates shallow‐marine wave/storm‐dominated systems over geological timescales. This link requires the construction of a likelihood function to quantify the agreement between simulated and observed data of different types (e.g. sediment age and thickness, grain size distributions). The technique has been tested and validated with synthetic data, in which all the parameters are specified to produce a ‘perfect’ simulation, although we add noise to these synthetic data for subsequent testing of the inverse modelling approach. These tests addressed convergence and computational‐overhead issues, and highlight the robustness of the inverse scheme, which is able to assess the full range of uncertainties on the inferred environmental parameters and facies distributions.  相似文献   

16.
The Cameros Basin (North Spain) is a Late Jurassic‐Early Cretaceous extensional basin, which was inverted during the Cenozoic. It underwent a remarkable thermal evolution, as indicated by the record of anomalous high temperatures in its deposits. In this study, the subsidence and thermal history of the basin is reconstructed, using subsidence analysis and 2D thermal modelling. Tectonic subsidence curves provide evidence of the occurrence of two rapid subsidence phases during the syn‐extensional stage. In the first phase (Tithonian‐Early Berriasian), the largest accommodation space was formed in the central sector of the basin, whereas in the second (Early Barremian‐Early Albian), it was formed in the northern sector. These rapid subsidence phases could correspond to relevant tectonic events affecting the Iberian Plate at that time. By distinguishing between the initial and thermal subsidence and defining their relative magnitudes, Royden's (1986) method was used to estimate the heat flow at the end of the extensional stage. A maximum heat flow of 60–65 mW/m2 is estimated, implying only a minor thermal disturbance associated with extension. In contrast with these data, very high vitrinite reflectance, anomalously distributed in some case with respect to the typical depth‐vitrinite reflectance relation, was measured in the central‐northern sector of the basin. Burial and thermal data are used to construct a 2D thermal basin model, to elucidate the role of the processes involved in sediment heating. Calibration of the thermal model with the vitrinite reflectance (%Ro) and fluid inclusion (FI) data indicates that in the central and northern sectors of the basin, an extra heat source, other than a typical rift, is required to explain the observed thermal anomalies. The distribution of the %Ro and FI values in these sectors suggests that the high temperatures and their distribution are related to the circulation of hot fluids. Hot fluids were attributed to the hydrothermal metamorphic events affecting the area during the early post‐extensional and inversion stages of the basin.  相似文献   

17.
Removed overburden, burial, maturation, and petroleum generation analysis indicates that maturity in the Arkoma Basin and the Ouachita Foldbelt is explained effectively using simple burial models that account for the significant surface erosion that has occurred and assuming geothermal gradients similar to present-day gradients have been approximately constant through geologic time. Regional models, based on analysis at 115 well locations, indicate that from 5,000 to 15,000 ft (1.5–4.5 km) of section, differing with location from north to south and west to east, has been removed from the Arkoma Basin region, and as much as 25,000–40,000 ft (7.5–12 km) have been removed from areas of the Ouachita Foldbelt. Based on burial and thermal history reconstruction, increasing maturation from west to east across the basin is primarily the result of increasing overburden and subsequent surface erosion from west to east. The models predict most publicly available vitrinite reflectance data within a factor of 1.5 at two standard deviations. Comparison of model and measured reflectance-depth trends in six wells indicates that hydrothermal fluid movement should not have modified reflectance by more than approximately 20% in the center of the basin. Analysis indicates that most of the basin is overmature for oil production from intervals below the Spiro Sandstone, except to the north and northwest. Although thermal maturities are high, methane is stable throughout the basin. Except for the basal Arbuckle Group, all formations were thermally immature for oil generation prior to burial by the Mississippian and Morrowan in the Ouachita Foldbelt of Oklahoma and by the Atokan and Desmoinesian over most of the basin and study area. In the deeper part of the present basin, all strata entered and passed through the oil window during or within 10 My after Atokan time. Because no additional major quantities of hydrocarbons were generated after Atokan time, the hydrocarbons must have been emplaced and trapped during this brief time interval.  相似文献   

18.
Four Mesozoic–Cenozoic palaeothermal episodes related to deeper burial and subsequent exhumation and one reflecting climate change during the Eocene have been identified in a study of new apatite fission‐track analysis (AFTA®) and vitrinite reflectance data in eight Danish wells. The study combined thermal‐history reconstruction with exhumation studies based on palaeoburial data (sonic velocities) and stratigraphic and seismic data. Mid‐Jurassic exhumation (ca. 175 Ma) was caused by regional doming of the North Sea area, broadly contemporaneous with deep exhumation in Scandinavia. A palaeogeothermal gradient of 45 °C km?1 at that time may be related to a mantle plume rising before rifting in the North Sea. Mid‐Cretaceous exhumation affecting the Sorgenfrei–Tornquist Zone is probably related to late Albian tectonic movements (ca. 100 Ma). The Sole Pit axis in the southern North Sea experienced similar inversion and this suggests a plate‐scale response along crustal weakness zones across NW Europe. Mid‐Cenozoic exhumation affected the eastern North Sea Basin and the onset of this event correlates with a latest Oligocene unconformity (ca. 24 Ma), which indicates a major Scandinavian uplift phase. The deeper burial that caused the late Oligocene thermal event recognized in the AFTA data reflect progradation of lower Oligocene wedges derived from the uplifting Scandinavian landmass. The onset of Scandinavian uplift is represented by an earliest Oligocene unconformity (ca. 33 Ma). Late Neogene exhumation affected the eastern (and western) North Sea Basin including Scandinavia. The sedimentation pattern in the central North Sea Basin shows that this phase began in the early Pliocene (ca. 4 Ma), in good agreement with the AFTA data. These three phases of Cenozoic uplift of Scandinavia also affected the NE Atlantic margin, whereas an intra‐Miocene unconformity (ca. 15 Ma) on the NE Atlantic margin reflects tectonic movements of only minor amplitude in that area. The study demonstrates that only by considering episodic exhumation as an inherent aspect of the sedimentary record can the tectonic evolution be accurately reconstructed.  相似文献   

19.
The USARP Mountains comprise two N–S‐aligned mountain ranges (Daniels Range, Pomerantz Tableland) located along the western margin of the Rennick Glacier in Northern Victoria Land (NVL). Four zircon and titanite fission track (FT) ages from granitic samples from the Pomerantz Tableland fall in a common range of 369–392 Ma. The apatite FT ages from 20 Granite Harbour Intrusive rocks sampled throughout the USARP Mountains are distinctively younger (86–270 Ma); their mean track lengths (MTL) vary between 11.0 and 13.9 μm. Six samples from Renirie Rocks and the Kavrayskiy Hills east of the USARP Mountains have even younger, concordant apatite FT ages of 43–71 Ma, and MTL of 12.2–14.0 μm. Thermal history modelling of the thermochronological data indicate that both the Daniels Range and Pomerantz Tableland experienced a common Phanerozoic geologic history consisting of a mid‐Devonian pulse of rapid denudation, followed by a protracted denudation stage between the Carboniferous and Jurassic. This latter period of denudation was contemporaneous with the formation of the Transantarctic Basin to the east. We consequently suggest that the USARP Mountains were one of the major source areas for the Beacon Supergroup that formed the fill of the Transantarctic Basin. Subsequent to the deposition of the Beacon sequence, the now‐outcropping rocks of the USARP Mountains were buried to a maximum depth of 4.2 km. A palaeogeothermal gradient of 25±8°C km?1 was inferred at the time of maximum burial. Inversion of the Transantarctic Basin due to the breakup of Gondwana, and in response to Cenozoic rifting and uplift of the Transantarctic Mountains, has triggered the final denudation stages recorded in NVL since the Cretaceous. Thereby, the amounts of denudation increase eastward. Whereas 2.4–4.2 km of crustal unloading are recognized for the USARP Mountains since the Cretaceous, more than 4 km of denudation has occurred towards the Rennick Graben alone since the Eocene. This denudation was associated with major fault activities involving early ENE–WSW to E–W‐directed extension. Related structures were reactivated by dominant NW–SE to NNW–SSE‐oriented right‐lateral shear genetically linked to the formation and inversion of the structural depression of the Rennick Graben in Cenozoic times.  相似文献   

20.
The Patagonian Magallanes retroarc foreland basin affords an excellent case study of sediment burial recycling within a thrust belt setting. We report combined detrital zircon U–Pb geochronology and (U–Th)/He thermochronology data and thermal modelling results that confirm delivery of both rapidly cooled, first‐cycle volcanogenic sediments from the Patagonian magmatic arc and recycled sediment from deeply buried and exhumed Cretaceous foredeep strata to the Cenozoic depocentre of the Patagonian Magallanes basin. We have quantified the magnitude of Eocene heating with thermal models that simultaneously forward model detrital zircon (U–Th)/He dates for best‐fit thermal histories. Our results indicate that 54–45 Ma burial of the Maastrichtian Dorotea Formation produced 164–180 °C conditions and heating to within the zircon He partial retention zone. Such deep burial is unusual for Andean foreland basins and may have resulted from combined effects of high basal heat flow and high sediment accumulation within a rapidly subsiding foredeep that was floored by basement weakened by previous Late Jurassic rifting. In this interpretation, Cenozoic thrust‐related deformation deeply eroded the Dorotea Formation from ca. 5 km burial depths and may be responsible for the development of a basin‐wide Palaeogene unconformity. Results from the Cenozoic Río Turbio and Santa Cruz formations confirm that they contain both Cenozoic first‐cycle zircon from the Patagonian magmatic arc and highly outgassed zircon recycled from older basin strata that experienced burial histories similar to those of the Dorotea Formation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号