共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
In this paper, an existing elastoplastic constitutive model, originally developed for granular soils, is adapted to describe the stress–strain behaviour of cemented granular soils. The existing model (CJS), due to its modular formulation, can be easily developed to take into account different supplementary behavioural aspects in soil mechanics. In the present study, the failure mechanism of the CJS model is modified by introducing the essential aspects in the behaviour of cemented granular soils in its formulation. All of the model parameters have clear physical meaning and can be identified using classical laboratory tests. A set of direct relations between model parameters and famous mechanical parameters of soils such as internal friction angle and cohesion at peak and residual states is presented. In order to validate the model, the results of triaxial and uniaxial tests in the compression and extension performed on cemented granular materials are used. The validation results indicate the good capability of the proposed model. 相似文献
3.
For research on granular materials, establishing a method to calculate continuum strain from particle displacements is necessary for understanding the material behaviour at macro-level and developing continuum constitutive models. Existing methods are generally based on constructing a mesh or background grid to calculate strain from particle motions. These methods offer rigorous ways to measure strain for granular materials; however, they suffer from several problems such as mesh distortion and lacking grid-to-particle strain mapping procedure, which hinders their capability of calculating strain accumulation during large deformation processes of granular media. To address this issue, this study proposes a new strain calculation method for discrete element simulations of granular materials. This method describes a particle assembly as an equivalent continuum system of material points, each of which corresponds to a particle centre and represents a continuous region with its initial volume/area presumably equal to the volume/area of Voronoi cells generated in accordance with the particle assembly configuration. Smooth Particle Hydrodynamics (SPH) interpolation functions are then employed to calculate strain for these material points. This SPH-based method does not require any mesh or background grid for computation, leading to advantages in calculating strain accumulation under large deformation. Simulations of granular materials in both uniform and heterogeneous gradations were carried out, and strain results obtained by the proposed method indicate good agreements with analytical and numerical solutions. This demonstrates its potential for strain calculations in discrete element simulations of granular materials involving large deformations and/or large displacements. 相似文献
4.
5.
Multi‐scale investigations aided by the discrete element method (DEM) play a vital role for current state‐of‐the‐art research on the elementary behaviour of granular materials. Similar to laboratory tests, there are three important aspects to be considered carefully, which are the proper stress/strain definition and measurement, the application of target loading paths and the designed experiment setup, to be addressed in the present paper. Considering the volume sensitive characteristics of granular materials, in the proposed technique, the deformation of the tested specimen is controlled and measured by deformation gradient tensor involving both the undeformed configuration and the current configuration. Definitions of Biot strain and Cauchy stress are adopted. The expressions of them in terms of contact forces and particle displacements, respectively, are derived. The boundary of the tested specimen consists of rigid massless planar units. It is suggested that the representative element uses a convex polyhedral (polygonal) shape to minimize possible boundary arching effects. General loading paths are described by directly specifying the changes in the stress/strain invariants or directions. Loading can be applied in the strain‐controlled mode by specifying the translations and rotations of the boundary units, or in the stress‐controlled mode by using a servo‐control mechanism, or in the combination of the two methods to realize mixed boundary conditions. Taking the simulation results as the natural consequences originated from a complex system, virtual experiments provide particle‐scale information database to conduct multi‐scale investigations for better understanding in granular material behaviours and possible development of the constitutive theories provided the qualitative similarity between the simulation results from virtual experiments and observations on real material behaviour. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
6.
分数阶微分理论在土体静力黏弹性本构模型中得到了广泛应用,然而,其在动力弹塑性模型中的应用尚不多见。为此,基于分数阶微积分理论分析了粗粒料在循环荷载下的变形特性,提出了粗粒料在循环荷载下的分数阶应变率;并以此为基础,进一步建立了粗粒料受静动力荷载作用下的边界面塑性力学本构模型。所提出模型包含10个参数,均可以运用常规三轴试验获得。为了验证所提出模型,选取了几种已有不同文献中的不同粗粒料试验数据进行了模拟,发现,所提出的模型可以较好地模拟粗粒料在静动力加载下的应力-应变行为,对于循环荷载下的长期变形也能较好地预测。 相似文献
7.
The extent to which the evolution of instabilities and failure across multiple length scales can be reproduced with the aid of a bifurcation analysis is examined. We adopt an elastoplastic micropolar constitutive model, recently developed for dense cohesionless granular materials within the framework of thermomicromechanics. The internal variables and their evolution laws are conceived from a direct consideration of the dissipative mechanism of force chain buckling. The resulting constitutive law is cast entirely in terms of the particle scale properties. It thus presents a unique opportunity to test the potential of micromechanical continuum formulations to reproduce key stages in the deformation history: the development of material instabilities and failure following an initially homogeneous deformation. Progression of failure, initiating from frictional sliding and rolling at contacts, followed by the buckling of force chains, through to macroscopic strain softening and shear banding, is reproduced. Bifurcation point, marking the onset of shear banding, occurred shortly after the peak stress ratio. A wide range of material parameters was examined to show the effect of particle scale properties on the progression of failure. Model predictions on the thickness and angle of inclination of the shear band and the structural evolution inside the band, namely the latitudinal distribution of particle rotations and the angular distributions of contacts and the normal contact forces, are consistent with observations from numerical simulations and experiments. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
8.
The theory of fractional calculus has been successfully applied to model the triaxial behaviour of soils under static loading conditions. However, limited work has been carried out in using the fractional calculus to describe the cyclic behaviour of granular soils. In this paper, a fractional order constitutive model for granular soils under drained cyclic loading is proposed by incorporating the concept of fractional rate for strain accumulation. The fractional rate for strain accumulation is obtained from the analysis of the experimental data by utilizing the fractional calculus. Comparison between the test results and model predictions is presented. The key feature of the proposed model is that it can reasonably characterise the cyclic deformation of granular soils under both low and high loading cycles. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
9.
In this research, the interfacial energy is taken into account in the deformation work for unsaturated soils. Based on porous media theory, the thermodynamic balance equations for each phase and the interface are used to derive the work input for unsaturated soils. The work input equation serves as the basis and starting point for the choice of stress state variables, based on which the conjugate stresses and strain increments are derived. The influences of the interfaces on the effective stress and the constitutive law for the liquid phase are then discussed based on the work input equation. The effective stress can be expressed as Bishop's type, and the effective stress parameter is shown to be a function of both the degree of saturation and the interfacial area. The constitutive law for the liquid phase under dynamic condition is also presented. The relationship among interfacial area, saturation, and capillary pressure is proposed to calculate the value of the effective stress. Experimental data obtained from literature are used to validate the proposed model equations. Results show that our findings are in accordance with the existing research. Unlike the phenomenal study, our research has a rigorous theoretical basis, which lays a foundation for further research of unsaturated soils considering the interfacial effects. 相似文献
10.
One of the purposes in this study is to develop a modified micromorphic continuum model for granular materials on the basis of a micromechanics approach. A symmetric curvature tensor is proposed in this model, and a symmetric couple stress tensor is derived conjugating the symmetric curvature tensor. In addition, a correct derivation is presented to obtain the symmetric stress tensor conjugated with the symmetric strain tensor. The modified model provides a complete deformation mode for granular materials by considering the decomposition for motions (displacement and rotation) of particles. Consequently, the macroscopic constitutive relationships and constitutive moduli are derived in expressions of the microstructural information. Furthermore, the balance equations and boundary conditions are obtained for the modified micromorphic model. By considering the extended Drucker-Prager yield criterion, the micromorphic elastoplastic model is developed. Another purpose of this study is to derive the finite element formulation for the developed micromorphic elastoplastic model. Based on the ABAQUS user element (UEL) interface, numerical simulations investigated the load-displacement relationship and the strain localization behavior of granular materials and investigated the influence of microscopic parameters in the micromorphic model on these macroscopic mechanical responses. Numerical results illustrate the presented model's capability of simulating the strain-softening and strain localization behaviors, and the capability of considering the influence of microstructural information on the macroscopic mechanical behaviors of granular materials. 相似文献
11.
Time-dependent response of deep tunnels is studied considering the progressive degradation of the mechanical properties of the rock mass. The constitutive model is based on a rock-aging law for the uniaxial strength of the rock and for the Young’s modulus. A semi-analytical solution is developed for the stresses and displacements around a deep circular tunnel taking into account the face advance. The evolution of the plastic and damage zones over time is determined. Numerical examples are presented for the case of Saint-Martin-La-Porte access adit in France of the Lyon–Turin Base Tunnel. The computed results which are compared with the field data in terms of the convergence of tunnel wall and of the displacements inside the rock mass monitored by multi-point extensometers show the efficiency of the approach to simulate the time-dependent deformation of a tunnel excavated in squeezing ground. Simple relationships are proposed to evaluate the parameters of the constitutive model directly from those of the empirical convergence law presented in previous work. 相似文献
12.
This paper explores the possibility of using well-accepted concepts—Mohr-Coulomb-like strength criterion, critical state, existence of a small strain elastic region, hyperbolic relationship for representing global plastic stress–strain behaviour, dependence of strength on state parameter and flow rules derived from the Cam-Clay Model—to represent the general multiaxial stress–strain behaviour of granular materials over the full range of void ratios and stress level (neglecting grain crushing). The result is a simple model based on bounding surface and kinematic hardening plasticity, which is based on a single set of constitutive parameters, namely two for the elastic behaviour plus eight for the plastic behaviour, which all have a clear and easily understandable physical meaning. In order to assist the convenience of the numerical implementation, the model is defined in a ‘normalized’ stress space in which the stress–strain behaviour does not undergo any strain softening and so certain potential numerical difficulties are avoided. In the first part the multiaxial formulation of the model is described in detail, using appropriate mixed invariants, which rationally combine stress history and stress. The model simulations are compared with some experimental results for tests on granular soils along stress paths lying outside the triaxial plane over a wide range of densities and mean stresses, using constitutive parameters calibrated using triaxial tests. Furthermore, the study is extended to the analysis of the effects induced by the different shapes of the yield and bounding surfaces, revealing the different role played by the size and the curvature of the bounding surface on the simulated behaviour of completely stress- and partly strain-driven tests. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
13.
A constitutive model for crushed salt is presented in this paper. A creep constitutive model is developed first and compared with test results. The constitutive model presented here concentrates on creep deformation because saline media behave basically in a ductile and time‐dependent way. An idealized geometry is used as a common framework to obtain stress–strain macroscopic laws based on two deformation mechanisms: fluid‐assisted diffusional transfer creep and dislocation creep. The model is able to predict strain rates that compare well with results from laboratory tests under isotropic and oedometric conditions. Macroscopic laws are written using a non‐linear viscous approach, which incorporates also a viscoplastic component, based on critical state theory. The viscoplastic term is intended for non‐creep deformation mechanisms such as grain reorganization and crushing. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
14.
Modelling cyclic behaviour of granular soils under both drained and undrained conditions with a good performance is still a challenge. This study presents a new way of modelling the cyclic behaviour of granular materials using deep learning. To capture the continuous cyclic behaviour in time dimension, the long short-term memory (LSTM) neural network is adopted, which is characterised by the prediction of sequential data, meaning that it provides a novel means of predicting the continuous behaviour of soils under various loading paths. Synthetic datasets of cyclic loading under drained and undrained conditions generated by an advanced soil constitutive model are first employed to explore an appropriate framework for the LSTM-based model. Then the LSTM-based model is used to estimate the cyclic behaviour of real sands, ie, the Toyoura sand under the undrained condition and the Fontainebleau sand under both undrained and drained conditions. The estimates are compared with actual experimental results, which indicates that the LSTM-based model can simultaneously simulate the cyclic behaviour of sand under both drained and undrained conditions, ie, (a) the cyclic mobility mechanism, the degradation of effective stress and large deformation under the undrained condition, and (b) shear strain accumulation and densification under the drained condition. 相似文献
15.
Recognition of non‐linear constitutive rock/soil model from experimental results is often multi‐modal in the large parameter space. A genetic evolution algorithm is thus proposed for its recognition, including that of structure of the model and coefficients in the model. The structure of the model can be firstly determined according to mechanical mechanism if the mechanism is clearly understood or searched by using evolutionary algorithm. The coefficients to be determined are then searched in global optional space. With the new evolutionary algorithm, the non‐linear stress–strain–time constitutive law to describe strain softening behaviours of diatomaceous soil under consolidated and undrained state was recognized by learning stress–strain–time behaviour of an intact sample under consolidated pressure of σc=0.1 MPa and strain velocity ofa=0.175%/min. This model gave reasonable prediction for diatomaceous soils under varying consolidated pressures (0.1–3.5 MPa) and strain velocities (0.0044–1.75%/min). It indicates that the methodology proposed in this paper is robust enough and strongly attractive for recognition of non‐linear constitutive model of soil and rock materials. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
16.
A new approach for calculating strain for particulate media 总被引：1，自引：0，他引：1
Discrete element modelling is a viable alternative to conventional continuum‐based analysis for analysing problems involving localized deformations of particulate media. However, to aid in the interpretation of the results, it is useful to express the results of discrete element analyses in terms of the continuum parameters of stress and strain. A number of homogenization methods have been proposed to calculate strain in discrete systems; however, two significant limitations of these methods remain. First, none of these methods incorporate particle rotation effects satisfactorily, although significant particle rotation occurs in shear bands in both physical tests and numerical simulations of granular materials. Additionally, observations of the particle displacement fields in shear bands in granular materials indicate that the displacements within the localizations are erratic. Consequently, existing linear, local interpolation approaches produce substantial variations in the strain values calculated in adjacent elements in the region of localization, hindering clear visualization of the strain localization as it evolves. A new method of domain discretization for calculating strain is proposed. This method is capable of capturing particle rotation and employs a non‐local meshfree interpolation procedure capable of smoothing the erratic displacements in strain localizations, which better defines their evolution. The proposed method is validated for problems involving both two and three dimensions. A number of methods are compared with the proposed method and pertinent insights are made. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
17.
INTRODUCTIONThe mechanical responses of soils are more com-plicated compared with metals.By comparing thephysical and mechanical properties of the metals withsoils,Lade(1988)found that there are17differentpoints between the metals and soils,which differfrom metals inthree basic mechanical characteristics:pressure sensitivity,dilatancy,and dependence ofstress path.Wang(2004)proposed a principle of theinteraction between plastic volume and shear strains,that is,there are two relatively inde… 相似文献
18.
A three-dimensional (3D) soil–structure interface model is proposed within the two-mechanism constitutive theory and bounding surface theory originally established for soils. The proposed model has two main characteristics: first, the model is formulated based on two different and superposed deformation mechanisms. The first mechanism is due to the stress ratio increment, and the second is due to the normal stress increment. Each mechanism induces a shear strain component and a normal strain component. The proposed model can be reduced to the conventional single-mechanism interface model. Second, the plastic modulus and stress dilatancy are defined using the bounding surface theory. The plastic flow rule under cyclic loading is modified and assumed to be dependent on both the stress state of the mapping point and the stress reversal loading direction. The proposed model was validated against the available 3D interface tests and was found to satisfactorily reflect the salient features of the interfaces under monotonic and cyclic loading paths with different normal boundaries. The problem in which the elastic normal stiffness in conventional single-mechanism interface models is often underestimated to enhance the simulation performance under varying normal stress conditions is solved by incorporating the second mechanism. And the effect of the second mechanism on the modeling behavior is discussed. The modified plastic flow direction accurately simulates the 3D cyclic shear response, and the difference between the model simulation and test result increases with the number of cycles by use of the plastic flow direction defined in conventional bounding surface theory. 相似文献
19.
劈裂注浆可以有效改善土体的变形参数,大大降低土体在受力状态改变时的变形量,对劈裂注浆后复合土体的等效变形参数进行研究十分重要。在综合分析劈裂注浆扩散机制和工程应用实际的基础上,基于均质化理论提出了劈裂注浆后复合土体的三维单元体几何模型,按等效原则给出了浆-土体积及受力分配关系模型图;接着基于横向各向同性本构关系推导了模型的等效弹性模量和等效泊松比的解析解。然后采用有限元方法取得了模型特定条件下的等效弹性模量和等效泊松比,并与解析结果进行对比分析。最后把模型和相应的解析结果引入Flac3D岩土工程专业分析软件,结合一个热力隧道工程实例对隧道劈裂注浆后关键位置的沉降进行预测分析,并与实测值进行了对比。研究表明：对所提出的计算模型,解析计算与有限元方法计算结果吻合度较高,说明了解析结果的正确性;基于该模型及其解析结果得到的隧道开挖后的沉降预测值与实测值具有良好的一致性,说明所提出的模型和相应的解析计算方法具有一定的可靠性和实用性。 相似文献
20.
A finite element model is developed for modelling coupled fluid expulsion/deformation behaviour of dewatering sediments subjected to external loadings under isothermal conditions. The non-linear deformation behaviour of the sediment (soil) skeleton is based on the force equilibrium equation in which the constitutive relationship of stress and strain is implemented by the modified Cam-Clay model in soil plasticity. The fluid flow behaviour in the model is described by the generalized porous media flow equation. The model allows temporal and spatial variations of porosity and permeability. The fluid viscosity and density are assumed to be temperature-dependent. The model also allows the development of single and multiple faults, depending upon the material (sediment and fluid) properties, loading and boundary conditions. Procedures are implemented for (1) updating the material properties such as porosity, permeability, fluid density and viscosity and (2) the development of faults which allow the formation of high-permeability conduits for fluid flow. The solution algorithm for displacements of the sediments and the excess pore (fluid) pressure is based on a residual load technique to handle the non-linear (elastic-plastic) deformation behaviour of the sediment skeleton. The model can be applied to one- and two-dimensional problems. Examples of a plane strain saturated sediment layer subjected to stepwise horizontal tractions versus time are given. 相似文献