首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Excellent exposures and the presence of lithological markers make it possible to reconstruct the fan facies pattern for a narrow (6000–60 000 yr), late Tortonian (7–8 Ma) time slice of a submarine fan complex that developed in the Tabernas basin. Unlike most classical fan models, which seem to refer to a single feeder-lobe system, the reconstruction from the Tabernas basin reveals at least three distinctive juxtaposed feeder-lobe systems: (I) a straight feeder valley terminating in a sandstone body consisting of stacked sand-filled scours (sand-rich system); (II) a straight feeder channel diverging in a broad front of nested scours in mudstones. These scours terminate in fine grained sheet-like turbidite deposits (muddy system); (III) a sinuous channel complex extending far into the basin without ‘lobe’ deposits at its mouth (solitary system). Sedimentary features indicate that in the Tabernas basin, initial basin floor morphology and mass-flow transport behaviour controlled and eventually stopped formation of the sand-rich system (I), while depositional topography and slope instability controlled formation of the muddy system (II). The unusual narrowness (10–30 m) and length (8 km) of the solitary system (III) points to its confinement, possibly a result of an intrabasinal fault escarpment trending obliquely to the general direction of slope. Flow stripping (Piper & Normark, 1984) could then explain the absence of a lobe at the channel terminus.  相似文献   

2.

The Upper Cambrian Owen Conglomerate of the West Coast Range, western Tasmania, comprises two upward‐fining successions of coarse‐grained siliciclastic rocks that exhibit a characteristic wedge‐shaped fill controlled by the basin‐margin fault system. Stratigraphy is defined by the informally named basal lower conglomerate member, middle sandstone member, middle conglomerate member and upper sandstone member. The lower conglomerate member has a gradational basal contact with underlying volcaniclastics of the Tyndall Group,while the upper sandstone member is largely conformable with overlying Gordon Group marine clastics and carbonates. The lower conglomerate member predominantly comprises high flow regime, coarse‐grained, alluvial‐slope channel successions, with prolonged channel bedload transport exhibited by the association of channel‐scour structures with upward‐fining packages of pebble, cobble and boulder conglomerate and sandstone, with abundant large‐scale cross‐beds derived from accretion in low‐sinuosity, multiply active braided‐channel complexes. While the dipslope of the basin is predominantly drained by west‐directed palaeoflow, intrabasinal faulting in the southern region of the basin led to stream capture and the subsequent development of axial through drainage patterns in the lower conglomerate member. The middle sandstone member is characterised by continued sandy alluvial slope deposition in the southern half of the basin, with pronounced west‐directed and local axial through drainage palaeoflow networks operating at the time. The middle sandstone member basin deepens considerably towards the north, where coarse‐grained alluvial‐slope deposits are replaced by coarse‐grained turbidites of thick submarine‐fan complexes. The middle conglomerate member comprises thickly bedded, coarse‐grained pebble and cobble conglomerate, deposited by a high flow regime fluvial system that focused deposition into a northern basin depocentre. An influx of volcanic detritus entered the middle conglomerate member basin via spatially restricted footwall‐derived fans on the western basin margin. Fluvial systems continued to operate during deposition of the upper sandstone member in the north of the basin, facilitated by multiply active, high flow regime channels, comprising thick, vertically stacked and upward‐fining, coarse‐grained conglomerate and sandstone deposits. The upper sandstone member in the south of the basin is characterised by extensive braid‐delta and fine‐grained nearshore deposits, with abundant bioturbation and pronounced bimodal palaeocurrent trends associated with tidal and nearshore reworking. An increase in base‐level in the Middle Ordovician culminated in marine transgression and subsequent deposition of Gordon Group clastics and carbonates.  相似文献   

3.
Exceptional exposures of Permian basin floor fans (fans 3, 4) and a slope fan (fan 5) in the Tanqua Karoo foreland basin of South Africa have enabled an investigation of the relation between the pinch-out geometries and fan architecture. The pinch-out geometry of fan 3 is characterized by the down dip transition from thin to medium bedded sheet deposits to pinch-out fingers, which are overlain by younger prograding sheet deposits. This geometry reflects the progradational stacking pattern of the fan. In contrast, the fan 4 pinch-out fingers consist of stacked channel fills in the same conduit. This pinch-out configuration relates to the dominant aggradational style observed on the mid and distal parts of fan 4. Fan 5 represents a slope fan comprising an axial channel conduit, which branches down slope into three distributary channels. The distal fan is characterized by larger channel fills, which may represent bypass channels to other basin floor fans. The very thick-bedded nature of the youngest channel fill unit suggests early bypass followed by retrogradation as indicated by the presence of thinner bedded heterolithic channel fill deposits along the axial conduit. Although some of the massive pinch-out channels exhibit basal scour, their depositional morphology suggests that they mainly originated due to the infill of subtle topographic depressions by low concentration turbidity currents. Instead of describing these features as channel fills, the use of the term pinch-out fingers is preferred.  相似文献   

4.
Ollier  Cochonat  Lénat  & Labazuy 《Sedimentology》1998,45(2):293-330
A volcaniclastic sedimentary fan extending to water depths of 4000 m is characterized using gravity cores, camera surveys, high-resolution sonar images, seismic records and bathymetry from the submarine portion of La Fournaise volcano, Réunion Island, a basaltic shield volcano in the SW Indian Ocean. Three main areas are identified from the study: (1) the proximal fan extending from 500 m water depth down to 2000 m water depth; (2) the outer fan extending from 2000 m water depth down to 3600 m water depth; (3) the basin extending beyond 3600 m water depth. Within these three main areas, seven distinct submarine environments are defined: the proximal fan is characterized by volcanic basement outcrops, sedimentary slides, deep-water deltas, debris-avalanche deposits, and eroded floor in the valley outlets; the outer fan is characterized by a discontinuous fine-grained sedimentary cover overlying coarse-grained turbidites or undifferentiated volcanic basement; the basin is characterized by hemipelagic muds and fine-grained turbidites interbedded with sandy and gravelly turbidite lobes. The evolution of the deep-sea volcaniclastic fan is strongly influenced by sector collapses, such as the one which occurred 0·0042 Ma ago. This collapse produced a minimum of 6 km3 of debris-avalanche deposit in the proximal area. The feeding regime of the deep-sea fan is ‘alluvial dominated’ before the occurrence of any sector collapse and ‘lava-dominated’ after the occurrence of a sector collapse. The main deep-water lava-fed delta is prograding among the blocks of the debris-avalanche deposits as a result of turbidity flows occurring on the delta slope. These turbidity flows are triggered routinely by wave-action, earthquakes and accumulation of new volcanic debris on top of the deltas. Both turbidity currents triggered on the deep-water delta slope, and those triggered by debris avalanche reworked volcaniclastic material as far as 100 km from the shore line.  相似文献   

5.
《Sedimentology》2018,65(4):1067-1096
Submarine landslides, including the basal shear surfaces along which they fail, and their subsequent infill, are commonly observed in modern seabed and seismic reflection data sets; their resultant relief impacts sediment routing and storage patterns on continental margins. Here, three stacked submarine landslides are documented from the Permian Ecca Group, Laingsburg depocentre, Karoo Basin, South Africa, including two superimposed lateral margins. The stratigraphic framework includes measured sections and correlated surfaces along a 3 km long, 150 m high outcrop. Two stacked 2·0 to 4·5 km wide and 90 m and 60 m deep erosion surfaces are recognized, with lateral gradients of 8° and 4°, respectively. The aim of this study was to understand the evolution of a submarine landslide complex, including: evolution of basal shear surfaces/zones; variation of infill confinement; and location of the submarine landslides in the context of basin‐scale sedimentation and degradation rates. Three stages of formation are identified: (i) failure of submarine landslide 1, with deposition of unconfined remobilized deposits; (ii) failure of submarine landslide 2, forming basal shear surface/zone 1, with infill of remobilized deposits and weakly confined turbidites; and (iii) failure of submarine landslide 3, forming basal shear surface/zone 2, with infill of remobilized deposits and confined turbidites, transitioning stratigraphically to unconfined deposits. The expression of basal shear varies laterally, from metres thick zones in silt‐rich strata to sharp stepped surfaces in sand‐rich strata. Faulting and rotation of overlying bedding suggest that the shear surfaces/zones were dynamic. Stacking of landslides resulted from multi‐phase slope failure, increasing down‐dip topography and confinement of infilling deposits. The failure slope was probably a low supply tilted basin margin evidenced by megaclast entrainment from underlying basin‐floor successions and the lack of channel systems. This study develops a generic model of landslide infill, as a function of sedimentation and degradation rates, which can be applied globally.  相似文献   

6.
The northern Gioia Basin of the south‐east Tyrrhenian Sea is a slope basin, ～ 20 km wide and ～ 50 km long, with a bathymetry of ≤ 1300 m, bounded by the Calabro‐Sicilian landmass and the Aeolian Island Arc. Coarse sediment is supplied from the Calabrian margin, where the shelf is very narrow to non‐existent, whereas the wider shelf on the Sicilian margin prevents supply by storing river‐fed sediments. The basin is dominated by the Gioia–Mesima canyon/channel system paralleled by a tongue‐shaped depositional lobe. Multibeam bathymetric surveys, sea floor reflectivity data and airgun seismic profiles reveal the recent evolution of the submarine system. Slope canyons and basin‐floor levéed channels formed where major rivers built deltas at the shelfless Calabrian margin and strong hyperpycnal flows predominated. The channels are a few hundred metres wide and a few tens of metres deep, with a downslope change from a straight to meandering pattern where the slope gradient decreases from 3·2% to 1·7%. The Mesima Channel has its lower segment abandoned because of avulsion and crevasse‐splay formation at an upslope bend. The adjacent Gioia Channel has had its upper segment straightened and lower segment entrenched because of erosional deepening of the Stromboli Valley into which it debouches and which acts as the local base level. Overbank features include levées, coalescent splays and ‘yazoo’ channels; their nature and surface characteristics depend upon the magnitude and sediment grain‐size of spill‐over flows. On an adjoining narrow shelf sliver of the Calabrian margin, in contrast, the coalescing plumes of sediment suspension supplied by an array of smaller coastal streams were apparently spilling over the shelf edge, scouring a funnel‐shaped bypass depression with chutes and forming an elongate, non‐channellized depositional lobe at the slope base. The study demonstrates the impact of sediment source type, shelf width, basin‐floor gradient and base‐level change on the style of deep‐water sedimentation.  相似文献   

7.
ABSTRACT The Wagwater Trough is a fault-bounded basin which cuts across east-central Jamaica. The basin formed during the late Palaeocene or early Eocene and the earliest sediments deposited in the trough were the Wagwater and Richmond formations of the Wagwater Group. These formations are composed of up to 7000 m of conglomerates, sandstones, and shales. Six facies have been recognized in the Wagwater Group: Facies I-unfossiliferous massive conglomerates; Facies II—channelized, non-marine conglomerates, sandstones, and shales; Facies III-interbedded, fossiliferous conglomerates and sandstones; Facies IV—fossiliferous muddy conglomerates; Facies V—channelized, marine conglomerates, sandstones, and shales; and Facies VI—thin-bedded sheet sandstones and shales. The Wagwater and Richmond formations are interpreted as fan delta-submarine fan deposits. Facies associations suggest that humid-region fan deltas prograded into the basin from the adjacent highlands and discharged very coarse sediments on to a steep submarine slope. At the coast waves reworked the braided-fluvial deposits of the subaerial fan delta into coarse sand and gravel beaches. Sediments deposited on the delta-front slope were frequently remobilized and moved downslope as slumps, debris flows, and turbidity currents. At the slope-basin break submarine fans were deposited. The submarine fans are characterized by coarse inner and mid-fan deposits which grade laterally into thin bedded turbidites of the outer fan and basin floor.  相似文献   

8.
The Kingston Peak Formation of the Pahrump Group in the Death Valley region of the Basin and Range Province, USA, is the thick (over 3 km) mixed siliciclastic–carbonate fill of a long‐lived structurally‐complex Neoproterozoic rift basin and is recognized by some as a key ‘climatostratigraphic’ succession recording panglacial Snowball Earth events. A facies analysis of the Kingston Peak Formation shows it to be largely composed of ‘tectonofacies’ which are subaqueous mass flow deposits recording cannibalization of older Pahrump carbonate strata exposed by local faulting. Facies include siltstone, sandstone and conglomerate turbidites, carbonate megabreccias (olistoliths) and related breccias, and interbedded debrites. Secondary facies are thin carbonates and pillowed basalts. Four distinct associations of tectonofacies (‘base‐of‐scarp’; FA1, ‘mid‐slope’; FA2, ‘base‐of‐slope’; FA3, and a ‘carbonate margin’ association; FA4) reflect the initiation and progradation of deep water clastic wedges at the foot of fault scarps. ‘Tectonosequences’ record episodes of fault reactivation resulting in substantial increases in accommodation space and water depths, the collapse of fault scarps and consequent downslope mass flow events. Carbonates of FA4 record the cessation of tectonic activity and resulting sediment starvation ending the growth of clastic wedges. Tectonosequences are nested within regionally‐extensive tectono‐stratigraphic units of earlier workers that are hundreds to thousands of metres in thickness, recording the long‐term evolution of the rifted Laurentian continental margin during the protracted breakup of Rodinia. Debrite facies of the Kingston Peak Formation are classically described as ice‐contact glacial deposits recording globally‐correlative panglacials but they result from partial to complete subaqueous mixing of fault‐generated coarse‐grained debris and fine‐grained distal sediment on a slope conditioned by tectonic activity. The sedimentology (tectonofacies) and stratigraphy (tectonosequences) of the Kingston Peak Formation reflect a fundamental control on local sedimentation in the basin by faulting and likely earthquake activity, not by any global glacial climate.  相似文献   

9.
The Upper Cretaceous Cerro Toro Formation in the Silla Syncline, Parque Nacional Torres del Paine, Magallanes Basin, Chile, includes over 1100 m of mainly thin‐bedded mud‐rich turbidites containing three thick divisions of coarse conglomerate and sandstone. Facies distributions, stacking patterns and lateral relationships indicate that the coarse‐grained sandstone and conglomerate units represent the fill of a series of large south to south‐east trending deep‐water channels or channel complexes. The middle coarse division, informally named the Paine member, represents the fill of at least three discrete channels or channel complexes, termed Paine A, B and C. The uppermost of these, Paine C, represents a channel belt about 3·5 km wide and its fill displays explicit details of channel geometry, channel margins, and the processes of channel development and evolution. Along its northern margin, Paine C consists of stacked, laterally offset channels, each eroded into fine‐grained mudstone and thin‐bedded sandy turbidites. Along its southern margin, the Paine C complex was bounded by a single, deeply incised but stepped erosional surface. The evolution of the Paine C channel occurred through multiple cycles of activity, each involving: (i) an initial period of channel erosion into underlying fine‐grained sediments; (ii) deposition of coarse‐grained pebble to cobble conglomerate and sandstone within the channel; and (iii) waning of coarse sediment deposition and accumulation of a widespread sheet of fine‐grained, thin‐bedded turbidites inside and outside the channel. The thin‐bedded turbidites deposited within, and adjacent to, the channel along the northern margin of the Paine C complex do not appear to represent levée deposits but, rather, a separate fine‐grained turbidite system that impinged on the Paine C channel from the north. The Cerro Toro channel complex in the Silla Syncline may mark either an early axial zone of the Magallanes Basin or a local slope mini‐basin developed behind a zone of slope faulting and folding now present immediately east of the syncline. If the latter, flows moving downslope toward the basin axis further east were diverted to the south by this developing structural high, deposited part of their coarse sediment loads, and exited the mini‐basin at a point located near the south‐eastern edge of the present Silla Syncline.  相似文献   

10.
Thick turbidites accumulated along the northern margin of the Iapetus Ocean in Britain from mid-Ordovician to late Silurian times. Recent plate tectonic reconstructions hold that, during subduction, packets of these sediments, together with the underlying pelagic facies and thin portions of the uppermost ocean crust, were stripped from the descending plate and accreted to the inner trench wall on the Laurentian (North American) continental margin. The resulting accretionary prism is represented today by the Ordovician and Silurian rocks of the Southern Uplands of Scotland and the Longford-Down massif of Ireland. In these areas major reverse faults separate tracts of steeply dipping greywackes and mudstones with minor amounts of cherts and basalts. These tracts are up to several kilometres wide; their constituent beds face predominantly to the northwest, away from the site of the ancient ocean, while becoming progressively younger in each major fault slice towards the Iapetus suture in the southeast. From the stratigraphic sequences in these fault slices the sedimentary history of a portion of the Iapetus Ocean, and the British sector of its northern margin, can be reconstructed. In the Southern Uplands the earliest turbidites (mid- and late-Ordovician) are preserved in the northernmost fault slices. Regional facies trends, and vertical facies analysis, suggest that they accumulated in a trench dominated by a series of relatively small lower trench slope-derived fans. Pelagic sediments of the same age are found in the fault slices to the south, suggesting that the Ordovician turbidites were confined to the trench. During the lower and middle Llandovery, volcaniclastic trench turbidites were separated from quartz-rich ocean-floor turbidites (represented in the southern fault slices) by an elongate rise, on which pelagic deposits accumulated. This is interpreted as the outer trench high. In late Llandovery times the rise was overwhelmed, and thick laterally derived quartzose turbidites blanketed both the trench and the ocean floor. Sedimentation was strongly influenced by the evolution of the accretionary prism. By Llandovery times a trench slope break had emerged, supplying sediment both south to the trench and north to an upper slope basin in the Midland Valley of Scotland. In this basin early Silurian turbidites were followed by shallow-water and terrestrial sediments. Most of the sediment was derived from the emergent trench slope break: the volcanic arc and the Grampian orogenic belt to the north provided little or no detritus. Throughout the Ordovician and Silurian, sediment in the trench and on the ocean floor was derived from the volcanic arc, from the lower trench slope/trench slope break, from a degrading plutonic/metamorphic terrain (the Grampian Orogen), and locally by a minor amount of submarine sliding from carbonate-capped volcanic seamounts. Progressive elevation of the trench slope break in Silurian (and perhaps late Ordovician) times indicates that sediment from the arc-orogen hinterland must have bypassed the upper slope in the unexposed section of the margin to the northeast of the Southern Uplands, and travelled into the area axially along the trench floor.  相似文献   

11.
华南海相深水重力沉积相模式   总被引：10，自引：0，他引：10  
通过对华南地区诸多海相盆地深水沉积物的详细解剖,识别出一个由重力搬运沉积形成的完整岩类系列,包括孤立岩块、滑动滑塌和重力流沉积三个基本端元大类。这些重力流沉积以不同的型式组合构成了三大类七亚类各具特征的深水沉积体系。Ⅰ陆源碎屑体系包括(1)海底扇和(2)轴向搬运沉积亚体系。Ⅱ碳酸盐体系包括(1)碳酸盐缓坡,(2)沟槽型碳酸盐斜坡和(3)碳酸盐陡坡。Ⅲ混合物源体系包括(1)碳酸盐斜坡体系与陆屑海底扇组合;(2)碳酸盐斜坡体系与火山碎屑重力流轴向搬运沉积体系。  相似文献   

12.
Analysis of earthquake focal mechanisms allows division of the India‐Asia collision into kinematic domains that strongly correlate with topography. These kinematic domains indicate strain partitioning dominated by oblique slip deformation. The Kunlun and south Tibetan fault systems mark discontinuities in the strain field and bound the high, flat topography of the plateau which deforms by transtension. The northern and southern margins of Tibet deform by transpression or contraction and are topographically steep. Correlations between seismicity and topography are due to Mohr–Coulomb wedge mechanics at the northern and southern plateau margins which produce naturally steep surface slopes, whereas the flat interior and eastern margin of the Tibetan Plateau is underlain by viscous crust which supports subdued topography further muted by Cenozoic basin fill. These data indicate that the long wavelength topography of the India‐Asia collision is controlled by seismically caused surface displacements which are linked to deep crustal deformation mechanics.  相似文献   

13.
The study of new seismic data permits the identification of sediment gravity flows in terms of internal architecture and the distribution on shelf and abyssal setting in the Qiongdongnan Basin (QDNB). Six gravity flow types are recognized: (1) turbidite channels with a truncational basal and concordant overburden relationship along the shelf edge and slope, comprising laterally-shifting and vertically-aggrading channel complexes; (2) slides with a spoon-shaped morphology slip steps on the shelf-break and generated from the deformation of poorly-consolidated and high water content sediments; (3) slumps are limited on the shelf slope, triggered either by an anomalous slope gradient or by fault activity; (4) turbidite sheet complexes (TSC) were ascribed to the basin-floor fan and slope fan origin, occasionally feeding the deep marine deposits by turbidity currents; (5) sediment waves occurring in the lower slope-basin floor, and covering an area of approximately 400?km2, were generated beneath currents flowing across the sea bed; and (6) the central canyon in the deep water area represents an exceptive type of gravity flow composed of an association of debris flow, turbidite channels, and TSC. It presents planar multisegment and vertical multiphase characteristics. Turbidite associated with good petrophysical property in the canyon could be treated as a potential exploration target in the QDNB.  相似文献   

14.
《Sedimentology》2018,65(3):809-841
Degradation of basin‐margin clinothems around the shelf‐edge rollover zone may lead to the generation of conduits through which gravity flows transport sediment downslope. Many studies from seismic‐reflection data sets show these features, but they lack small‐scale (centimetre to metre) sedimentary and stratigraphic observations on process interactions. Exhumed basin‐margin clinothems in the Tanqua depocentre (Karoo Basin) provide seismic‐reflection‐scale geometries and internal details of architecture with depositional dip and strike control. At the Geelhoek locality, clinothem parasequences comprise siltstone‐rich offshore deposits overlain by heterolithic prodelta facies and sandstone‐dominated deformed mouth bars. Three of these parasequences are truncated by a steep (6 to 22°), 100 m deep and 1·5 km wide asymmetrical composite erosion surface that delineates a shelf‐incised canyon. The fill, from base to top comprises: (i) thick‐bedded sandstone with intrabasinal clasts and multiple erosion surfaces; (ii) scour‐based interbedded sandstone and siltstone with tractional structures; and (iii) inverse‐graded to normal‐graded siltstone beds. An overlying 55 m thick coarsening‐upward parasequence fills the upper section of the canyon and extends across its interfluves. Younger parasequences display progressively shallower gradients during progradation and healing of the local accommodation. The incision surface resulted from initial oversteepening and high sediment supply triggering deformation and collapse at the shelf edge, enhanced by a relative sea‐level fall that did not result in subaerial exposure of the shelf edge. Previous work identified an underlying highly incised, sandstone‐rich shelf‐edge rollover zone across‐margin strike, suggesting that there was migration in the zone of shelf edge to upper‐slope incision over time. This study provides an unusual example of clinothem degradation and readjustment with three‐dimensional control in an exhumed basin‐margin succession. The work demonstrates that large‐scale erosion surfaces can develop and migrate due to a combination of factors at the shelf‐edge rollover zone and proposes additional criteria to predict clinothem incision and differential sediment bypass in consistently progradational systems.  相似文献   

15.
Unlike for subaerial settings, the impact of subaqueous relay ramps on sediment dispersal is still poorly understood. A combination of analogue laboratory experiments in a sandbox with numerical flow calculations is used to simulate relay ramp topographies on rifting continental margins and to analyse the resulting turbidity current pathways and their deposits. Various scenarios are investigated, including inflow perpendicular and oblique to the relay ramp axis as well as flow constrained by an incised channel on the ramp and by a landward‐directed tilt of the ramp. Without channelling, most sedimentation takes place on the basin floor because the bulk of the flow follows the steepest gradient down the fault and into the rift basin. With a channel along the relay ramp, significant flow occurs initially down the ramp axis, but channel spillover and basinward ramp tilting combine to redirect much of the sediment down the fault slope into the basin. When the relay ramp has a landward‐oriented tilt, most of the current flows down the ramp and deposits its sediment load there and at the foot of the ramp. However, also here a considerable amount of the flow is shed over the hanging wall fault and into the basin, forming a secondary depocentre, while ponding redistributes thin deposits over a wider area of the basin. The quantitative dependence of these results on the specific ramp geometries remains to be investigated further but may bear great importance for refined sedimentary models in subaqueous rifted settings as well as for hydrocarbon exploration therein.  相似文献   

16.
The Lower Cretaceous Fortress Mountain Formation occupies a spatial and temporal niche between syntectonic deposits at the Brooks Range orogenic front and post‐tectonic strata in the Colville foreland basin. The formation includes basin‐floor fan, marine‐slope and fan‐delta facies that define a clinoform depositional profile. Texture and composition of clasts in the formation suggest progressive burial of a tectonic wedge‐front that included older turbidites and mélange. These new interpretations, based entirely on outcrop study, suggest that the Fortress Mountain Formation spans the boundary between orogenic wedge and foredeep, with proximal strata onlapping the tectonic wedge‐front and distal strata downlapping the floor of the foreland basin. Our reconstruction suggests that clinoform amplitude reflects the structural relief generated by tectonic wedge development and load‐induced flexural subsidence of the foreland basin.  相似文献   

17.
Abstract The Kyokpori Formation (Cretaceous), south‐west Korea, represents a small‐scale lacustrine strike‐slip basin and consists of an ≈ 290 m thick siliciclastic succession with abundant volcaniclasts. The succession can be organized into eight facies associations representing distinctive depositional environments: (I) subaqueous talus; (II) delta plain; (III) steep‐gradient large‐scale delta slope; (IV) base of delta slope to prodelta; (V) small‐scale nested Gilbert‐type delta; (VI) small‐scale delta‐lobe system; (VII) subaqueous fan; and (VIII) basin plain. Facies associations I, III and IV together constitute a large‐scale steep‐sloped delta system. Correlation of the sedimentary succession indicates that the formation comprises two depositional sequences: the lower coarsening‐ to fining‐upward succession (up to 215 m thick) and the upper fining‐upward succession (up to 75 m thick). Based on facies distribution, architecture and correlation of depositional sequences, three stages of basin evolution are reconstructed. Stage 1 is represented by thick coarse‐grained deposits in the lower succession that form subaqueous breccia talus and steep‐sloped gravelly delta systems along the northern and southern basin margins, respectively, and a sandy subaqueous fan system inside the basin, abutting against a basement high. This asymmetric facies distribution suggests a half‐graben structure for the basin, and the thick accumulation of coarse‐grained deposits most likely reflects rapid subsidence of the basin floor during the transtensional opening of the basin. Stage 2 is marked by sandy black shale deposits in the upper part of the lower succession. The black shale is readily correlated across the basin margins, indicating a basinwide transgression probably resulting from large‐scale dip slip suppressing the lateral slip component on basin‐bounding faults. Stage 3 is characterized by gravelly delta‐lobe deposits in the upper succession that are smaller in dimension and located more basinward than the deposits of marginal systems of the lower succession. This lakeward shift of depocentre suggests a loss of accommodation in the basin margins and quiescence of fault movements. This basin evolution model suggests that the rate of dip‐slip displacement on basin‐margin faults can be regarded as the prime control for determining stacking patterns of such basin fills. The resultant basinwide fining‐upward sequences deviate from the coarsening‐upward cycles of other transtensional basins and reveal the variety of stratigraphic architecture in strike‐slip basins controlled by the changes in relative sense and magnitude of fault movements at the basin margins.  相似文献   

18.
The Taveyannaz sandstones of eastern Switzerland are a succession of turbidites found within the Tertiary North Helvetic Flysch system; they represent a portion of the early, underfilled stage of the North Alpine Foreland Basin. The Taveyannaz sandstones were deposited in two sub-basins (Inner and Outer basins) separated by a topographic high trending ENE-WSW (parallel to the subsequent structural strike of the region), interpreted as an emergent thrust tip that propagated into the basin. The southerly Inner basin is therefore considered as a ‘piggy-back’basin comprising a 140 m thick succession dominated by approximately 12 very thick bedded sandstones with thick mudstone caps; these very thick bedded sandstone-mudstone couplets are interpreted as having resulted from the ponding of megaturbidite flows in the topographically confined Inner basin. Intercalated with the very thick bedded sandstones are thin to medium bedded sandstones. The Outer (northerly) basin comprises at least 240 m of turbidites characterized by sandstone packets (5–50 m thick) with extensive amalgamation of beds and a dominantly symmetrical vertical bed thickness and grain size profile. Intercalated between the sandstone packets are laminated graded siltstones and mudstones. The Inner basin sediments underwent localized deformation on the sea floor, generating an irregular surface topography which was then capped by a mud sheet emplaced by superficial sliding. During the emplacement of the mud sheet, large sandstone blocks (up to 130 m across) were incorporated from the underlying succession. The resultant geometry of the upper surface of the Inner basin sandstones exhibits vertical walls which truncate, and are perpendicular to, the underlying beds. The depositional style and structural control of the Taveyannaz sandstones, in association with the emplacement of superficial mud sheets, reflect processes that are highly analogous to those occurring in modern accretionary wedge environments. The sandstone packets of the Outer basin reflect a cyclical pattern of sedimentation alternating between deposition of sandstones and mudstones. The autocyclical or allocyclical controls on these high frequency alternations are difficult to interpret; likely mechanisms include lobe switching, climatic variations, eustatic sea level fluctuations and changes of horizontal in-plane deviatoric stress on the lithosphere. In this example, an alternative mechanism is speculated upon. This is based on the analogy with accretionary wedge processes. In this hypothesis, it is proposed that high frequency fluctuations in the accommodation space available on the shelf may result from fluctuations in the topographic slope of an accretionary wedge around its critical taper. Hence, during periods of accelerated frontal accretion, the taper angle of the thrust wedge becomes subcritical resulting in a broad, low angle topographic slope and increased shelfal accommodation. Consequently, sediment becomes trapped in a relatively landward position. The necessary rejuvenation of the surface slope of the thrust wedge to a critical taper is achieved through internal reactivation resulting in tectonic uplift and hence a relative fall in sea level; this leads to the reworking of sediment to the base of slope or outer trench. Repeated alternations of relative sea level between a subcritical highstand and a supercritical lowstand are considered to be sufficient to generate the observed alternations between sandstone and mudstone packages in the turbidite basin.  相似文献   

19.
The Miocene Kahramanmara? Peripheral Foreland Basin (KPFB) resemble to classic foreland basin model, with small differences. In the classic model, both the accretionary wedge and foredeep extend lengthways parallel to the plate margin. In addition, accretionary wedge includes wedge top basin or piggy back basin that extends parallel to foredeep. However, the accretionary wedge of the KPFB contains small half-graben type basins that obliquely intersect the plate margin between the Arabian Plate and the Anatolide–Taurides Platform (due to the irregular shape of the plate boundary). Tectonic lineaments controlled the shape and orientation of these basins and larger main depocentre of the KFPB, which were predominantly filled with deep-sea sediments. This paper focuses on the provenance of features of the KFPB, predominantly was fed from the northern basin margin, while also aiming to resolve the complex basin evolution that occurred during the Miocene.Clasts of Palaeozoic and Mesozoic limestone and ophiolites are common components of the confined deep-water clastic systems, which evolved as elongated trenches in the north-western sector of the KPFB during the Early-Middle Miocene. During the Middle Miocene, continuous thrusting of the northern basin margin to south caused depocentre migration to south-east, through the basin interior. At that time, the north-east and central depocentres of the KPFB were filled primarily by clasts of ophiolite and metamorphic units. The tectonic control on basin fill architecture can be observed anywhere in the KFPB. The principal tectonic features controlled the geometry and orientation of the canyon, the channel geometry of the deep-water slope on the northern basin margin, the frequency and distribution of slump-slide-debris flows and the overall pattern of sedimentation cycles in the stratigraphy of the slope and the central basin floor. Some basin sectors have continuously reactivated and as a result, different sediment entry points with substantial local accumulation of sediment and deformation have evolved on the slope and basin floor. Three scales of provenance were used to investigate the source rock: (a) field-based observation and analysis of conglomerate clasts, (b) modal analysis of sandstone facies and (c) geochemical analysis, all of which were in agreement.  相似文献   

20.
孙辉  姜涛  李春峰  徐乐 《地球科学》2014,39(10):1283-1294
南海海槽是全球大地震发生频率最高的地区之一,该地区增生楔上斜坡盆地内的重力流沉积记录了多分支断层及大地震活动历史.利用国际综合大洋钻探计划(IODP)314-316航次岩心-地震-综合测井资料,在详细分析南海海槽增生楔上斜坡盆地内重力流沉积特征基础上,阐明了其对多分支断层和大地震活动的响应机制.研究结果表明,南海海槽增生楔上斜坡盆地内依次充填了楔形块体流、峡谷和表层块体流沉积:楔形块体流形成于多分支断层活动早期,表现出北厚南薄的楔形特征,反映了多分支断层的持续活动的特征,沉积物中富含的粗颗粒泥质角砾岩反映了早期多分支断层剧烈活动的特征;峡谷系统由密集峡谷,大型块体流和轴向峡谷组成,主要受到多分支断层耦合造成斜坡变陡、区域地层孔隙流体压力增大和盆地不均衡抬升的影响;表层块体流位于盆地顶部,由多期次弱振幅块体流叠加组成,现今海底表面表现为大量“马蹄形”的垮塌地形,这些相对短期内广泛分布的块体流应该是由地震引起的地表震动触发的.斜坡盆地内重力流沉积特征反映了多分支断层活动历史以及大地震的发生过程:即1.95~1.55 Ma,多分支断层形成初期活动剧烈,逆冲活动造成了断层上盘沉积物垮塌,楔形块体流沉积在斜坡盆地底部;1.55~1.07 Ma,多分支断层西部耦合,导致斜坡盆地出现东高西低的构造格局以及盆地西部区域楔体和断层处能量的集聚;1.07 Ma至今,断层处能量间断释放,引发多次大地震.   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号