首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Vector-valued fragility functions for seismic risk evaluation   总被引：4，自引：4，他引：0  
This article presents a method for the development of vector-valued fragility functions, which are a function of more than one intensity measure (IM, also known as ground-motion parameters) for use within seismic risk evaluation of buildings. As an example, a simple unreinforced masonry structure is modelled using state-of-the-art software and hundreds of nonlinear time-history analyses are conducted to compute the response of this structure to earthquake loading. Dozens of different IMs (e.g. peak ground acceleration and velocity, response spectral accelerations at various periods, Arias intensity and various duration and number of cycle measures) are considered to characterize the earthquake shaking. It is demonstrated through various statistical techniques (including Receiver Operating Characteristic analysis) that the use of more than one IM leads to a better prediction of the damage state of the building than just a single IM, which is the current practice. In addition, it is shown that the assumption of the lognormal distribution for the derivation of fragility functions leads to more robust functions than logistic, log-logistic or kernel regression. Finally, actual fragility surfaces using two pairs of IMs (one pair are uncorrelated while the other are correlated) are derived and compared to scalar-based fragility curves using only a single IM and a significant reduction in the uncertainty of the predicted damage level is observed. This type of fragility surface would be a key component of future risk evaluations that take account of recent developments in seismic hazard assessment, such as vector-valued probabilistic seismic hazard assessments.  相似文献   

2.
This paper presents a method for seismic vulnerability analysis of bridge structures based on vector-valued intensity measure(v IM), which predicts the limit-state capacities efficiently with multi-intensity measures of seismic event. Accounting for the uncertainties of the bridge model, ten single-bent overpass bridge structures are taken as samples statistically using Latin hypercube sampling approach. 200 earthquake records are chosen randomly for the uncertainties of ground motions according to the site condition of the bridges. The uncertainties of structural capacity and seismic demand are evaluated with the ratios of demand to capacity in different damage state. By comparing the relative importance of different intensity measures, Sa(T1) and Sa(T2) are chosen as v IM. Then, the vector-valued fragility functions of different bridge components are developed. Finally, the system-level vulnerability of the bridge based on v IM is studied with DunnettSobel class correlation matrix which can consider the correlation effects of different bridge components. The study indicates that an increment IMs from a scalar IM to v IM results in a significant reduction in the dispersion of fragility functions and in the uncertainties in evaluating earthquake risk. The feasibility and validity of the proposed vulnerability analysis method is validated and the bridge is more vulnerable than any components.  相似文献   

3.
Probabilistic seismic demand models are a common and often essential step in generating analytical fragility curves for highway bridges. With these probabilistic models being traditionally conditioned on a single seismic intensity measure (IM), the degree of uncertainty in the models is dependent on the IM used. Selection of an optimal IM for conditioning these demand models is not a trivial matter and has been the focus of numerous studies. Unlike previous studies that consider a single structure for IM selection, this study evaluates optimal IMs for use when generating probabilistic seismic demand models for bridge portfolios such as would be found in HAZUS‐MH. Selection criteria such as efficiency, practicality, sufficiency, and hazard computability are considered in the selection process. A case study is performed considering the multi‐span simply supported steel girder bridge class. Probabilistic seismic demand models are generated considering variability in the geometric configurations and material properties, using two suites of ground motions—one synthetic and one recorded motion suite. Results show that of the 10 IMs considered, peak ground acceleration (PGA) and spectral acceleration at the fundamental period are the most optimal for the synthetic motions, and that cumulative absolute velocity is also a close contender when using recorded motions. However, when hazard computability is considered, PGA is selected as the IM of choice. Previous studies have shown that spectrally based quantities perform better than PGA for a given structure, but the findings of this study indicate that when a portfolio of bridges is considered, PGA should be used. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

4.
A fundamental issue in the framework of seismic probabilistic risk analysis is the choice of ground motion intensity measures (IMs). Based on the floor response spectrum method, the present contribution focuses on the ability of IMs to predict non‐structural components (NSCs) horizontal acceleration demand. A large panel of IMs is examined and a new IM, namely equipment relative average spectral acceleration (E‐ASAR), is proposed for the purpose of NSCs acceleration demand prediction. The IMs efficiency and sufficiency comparisons are based on (i) the use of a large dataset of recorded earthquake ground motions; (ii) numerical analyses performed on three‐dimensional numerical models, representing actual structural wall and frame buildings; and (iii) systematic statistical analysis of the results. From the comparative study, the herein introduced E‐ASAR shows high efficiency with respect to the estimation of maximum floor response spectra ordinates. Such efficiency is particularly remarkable in the case of structural wall buildings. Besides, the sufficiency and the simple formulation allowing the use of existing ground motion prediction models make the E‐ASAR a promising IMs for seismic probabilistic risk assessment. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

5.
The efficacy of various ground motion intensity measures (IMs) in the prediction of spatially distributed seismic demands (engineering demand parameters, (EDPs)) within a structure is investigated. This has direct implications to building‐specific seismic loss estimation, where the seismic demand on different components is dependent on the location of the component in the structure. Several common IMs are investigated in terms of their ability to predict the spatially distributed demands in a 10‐storey office building, which is measured in terms of maximum interstorey drift ratios and maximum floor accelerations. It is found that the ability of an IM to efficiently predict a specific EDP depends on the similarity between the frequency range of the ground motion that controls the IM and that of the EDP. An IMs predictability has a direct effect on the median response demands for ground motions scaled to a specified probability of exceedance from a ground motion hazard curve. All of the IMs investigated were found to be insufficient with respect to at least one of magnitude, source‐to‐site distance, or epsilon when predicting all peak interstorey drifts and peak floor accelerations in a 10‐storey reinforced concrete frame structure. Careful ground motion selection and/or seismic demand modification is therefore required to predict such a spatially distributed demands without significant bias. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

6.
This paper develops a procedure to select unscaled ground motions for estimating seismic demand hazard curves (SDHCs) in performance‐based earthquake engineering. Currently, SDHCs are estimated from a probabilistic seismic demand analysis, where several ensembles of ground motions are selected and scaled to a user‐specified scalar conditioning intensity measure (IM). In contrast, the procedure developed herein provides a way to select a single ensemble of unscaled ground motions for estimating the SDHC. In the context of unscaled motions, the proposed procedure requires three inputs: (i) database of unscaled ground motions, (ii) I M , the vector of IMs for selecting ground motions, and (iii) sample size, n; in the context of scaled motions, two additional inputs are needed: (i) a maximum acceptable scale factor, SFmax, and (ii) a target fraction of scaled ground motions, γ. Using a recently developed approach for evaluating ground motion selection and modification procedures, the proposed procedure is evaluated for a variety of inputs and is demonstrated to provide accurate estimates of the SDHC when the vector of IMs chosen to select ground motions is sufficient for the response quantity of interest. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

7.
Earthquake‐induced slope displacement is an important parameter for safety evaluation and earthquake design of slope systems. Traditional probabilistic seismic hazard analysis usually focuses on evaluating slope displacement at a particular location, and it is not suitable for spatially distributed slopes over a large region. This study proposes a computationally efficient framework for fully probabilistic seismic displacement analysis of spatially distributed slope systems using spatially correlated vector intensity measures (IMs). First, a spatial cross‐correlation model for three key ground motion IMs, that is, peak ground acceleration (PGA), Arias intensity, and peak ground velocity, is developed using 2686 ground motion recordings from 11 recent earthquakes. To reduce the computational cost, Monte Carlo simulation and data reduction techniques are utilized to generate spatially correlated random fields for the vector IMs. The slope displacement hazards over the region are further quantified using empirical predictive equations. Finally, an illustrative example is presented to highlight the importance of the spatial correlation and the advantage of using spatially correlated vector IMs in seismic hazard analysis of spatially distributed slopes. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

8.
A probabilistic representation of the entire ground‐motion time history can be constructed based on a stochastic model that depends on seismic source parameters. An advanced stochastic simulation scheme known as Subset Simulation can then be used to efficiently compute the small failure probabilities corresponding to structural limit states. Alternatively, the uncertainty in the ground motion can be represented by adopting a parameter (or a vector of parameters) known as the intensity measure (IM) that captures the dominant features of the ground shaking. Structural performance assessment based on this representation can be broken down into two parts, namely, the structure‐specific part requiring performance assessment for a given value of the IM, and the site‐specific part requiring estimation of the likelihood that ground shaking with a given value of the IM takes place. The effect of these two alternative representations of ground‐motion uncertainty on probabilistic structural response is investigated for two hazard cases. In the first case, these two approaches are compared for a scenario earthquake event with a given magnitude and distance. In the second case, they are compared using a probabilistic seismic hazard analysis to take into account the potential of the surrounding faults to produce events with a range of possible magnitudes and distances. The two approaches are compared on the basis of the probabilistic response of an existing reinforced‐concrete frame structure, which is known to have suffered shear failure in its columns during the 1994 Northridge Earthquake in Los Angeles, California. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

9.
The focus of this study is the impact of the seismic excitation direction on the fragility of horizontally curved bridges. Nonlinear time history analyses are performed on a typical, curved concrete bridge in China using a set of real ground motions with different incident angles. To build reliable probabilistic seismic demand models, ten commonly used intensity measures (IMs) are assessed in terms of various metrics to determine the optimal IMs, which account for the influence of the seismic excitation directions. Subsequently, fragility surfaces with respect to both the optimal IM and incident angles are generated to qualify the fragility sensitivity for various components and the bridge system to the seismic excitation directions. Moreover, the rationality and applicability of the methods recommended by the Caltrans, Eurocode 8 and Chinese codes for determining the seismic excitation direction of curved bridges are evaluated. The results indicate that the excitation direction imposes a minor impact on the optimal IM rankings. Compared to structure-independent IMs, structure-dependent IMs are more appropriate for predicting the demands of horizontally curved concrete bridges. However, the seismic excitation direction significantly affects the component fragilities, and the level of the effect intensifies with increasing limit states. If the incident angle occurrence probability is not provided, the Chinese code method for the seismic excitation direction is more suitable for the horizontally curved concrete bridge fragility assessment, which has the advantages of computational efficiency when compared to the Caltrans code and relatively conservative results when compared to Eurocode 8.  相似文献   

10.
The seismic behavior of a large diameter extended pile shaft founded on a dense sandy site is investigated in this paper. First, a deterministic analysis is conducted including both nonlinear dynamic analysis(NDA) and pushover analysis to gain insights into the behavior of the pile and make sure an appropriate modeling technique is utilized. Then a probabilistic analysis is performed using the results of NDA for various demands. To this end a set of 40 pulse-like ground motions are picked and subsequently 40 nonlinear dynamic and pushover analyses are performed. The data obtained from NDA are used to generate probabilistic seismic demand model(PSDM) plots and consequently the median line and dispersion for each plot are computed. The NDA and pushover data are also plotted against each other to find out to what extent they are correlated. These operations are done for various engineering demand parameters(EDPs). A sensitivity analysis is done to pick the most appropriate intensity measure(IM) which would cause a minimum dispersion in PSDM plots out of 7 different IMs. Peak ground acceleration(PGA) is found to be the most appropriate IM. Pushover coefficient equations as a function of PGA are proposed which can be applied to the pushover analysis data to yield a better outcome with respect to the NDA. At the end, the pacific earthquake engineering research(PEER) center methodology is utilized to generate the fragility curves using the properties obtained from PSDM plots and considering various states of damage ranging from minor to severe. The extended pile shaft shows more vulnerability with a higher probability with respect to minor damage compared to severe damage.  相似文献   

11.
基于时变地震损伤模型提出酸性大气环境作用下多龄期钢框架结构概率地震易损性分析的方法及步骤;考虑服役龄期对钢框架结构抗震性能的影响,分别建立时变概率地震需求模型、时变概率抗震能力模型及时变易损性模型;在概率地震需求分析及概率抗震能力分析的基础上,得到多龄期(20年、30年、40年、50年)钢框架结构的易损性模型及易损性曲线。  相似文献   

12.
Ground-motion models (GMMs) are widely used in probabilistic seismic hazard analysis (PSHA) to estimate the probability distributions of earthquake-induced ground-motion intensity measures (IMs) at a site, given an earthquake of a certain magnitude occurring at a nearby location. Accounting for spatial and cross-IM correlations in earthquake-induced ground motions has important implications on probabilistic seismic hazard and loss estimates. This study first develops a new Italian GMM with spatial correlation for 31 amplitude-related IMs, including peak ground acceleration (PGA), peak ground velocity (PGV), and 5%-damped elastic pseudo-spectral accelerations (PSAs) at 29 periods ranging from 0.01 to 4 seconds. The model estimation is performed through a recently developed one-stage nonlinear regression algorithm proposed by the authors, known as the Scoring estimation approach. In fact, current state-of-practice approaches estimate spatial correlation separately from the GMM estimation, resulting in inconsistent and statistically inefficient estimators of interevent and intraevent variances and parameters in the spatial correlation model. We test whether this affects the subsequent cross-IM correlation analysis. To this aim, based on the newly developed GMM, the empirical correlation coefficients from interevent and intraevent residuals are investigated. Finally, a set of analytical correlation models between the selected IMs are proposed. This is of special interest as several correlation models between different IMs have been calibrated and validated based on advanced GMMs and global datasets, lacking earthquakes in extensional regions; however, modeling the correlation between different IM types has not been adequately addressed by current, state-of-the-art GMMs and recent ground-motion records for Italy.  相似文献   

13.
Introduction The estimation of damage probability distribution among different damage states of rein-forced concrete buildings is a key component of earthquake loss estimation for modern city or a group of cities. With the development of city, the reinforced concrete buildings are major compo-nent parts of modern cities. Vulnerability estimates for these kinds of buildings are of importance to those responsible for civil protection, relief, and emergency services to enable adequate contin-genc…  相似文献   

14.
提出了一种综合考虑地震环境和场地影响的钢筋混凝土房屋地震易损性分析方法. 将地震环境、局部场地和工程结构作为一个整体,以概率地震危险性分析的方式考虑地震环境的影响,在此基础上详细考虑了随局部场地而变化的反应谱形状对结构地震反应及其破坏概率分布的影响. 此外,还提出了另一种表述结构易损性的方式,以对应于不同超越概率地震危险水平的方式, 提供结构地震破坏概率分布的信息.   相似文献   

15.
The conditional spectrum (CS, with mean and variability) is a target response spectrum that links nonlinear dynamic analysis back to probabilistic seismic hazard analysis for ground motion selection. The CS is computed on the basis of a specified conditioning period, whereas structures under consideration may be sensitive to response spectral amplitudes at multiple periods of excitation. Questions remain regarding the appropriate choice of conditioning period when utilizing the CS as the target spectrum. This paper focuses on risk‐based assessments, which estimate the annual rate of exceeding a specified structural response amplitude. Seismic hazard analysis, ground motion selection, and nonlinear dynamic analysis are performed, using the conditional spectra with varying conditioning periods, to assess the performance of a 20‐story reinforced concrete frame structure. It is shown here that risk‐based assessments are relatively insensitive to the choice of conditioning period when the ground motions are carefully selected to ensure hazard consistency. This observed insensitivity to the conditioning period comes from the fact that, when CS‐based ground motion selection is used, the distributions of response spectra of the selected ground motions are consistent with the site ground motion hazard curves at all relevant periods; this consistency with the site hazard curves is independent of the conditioning period. The importance of an exact CS (which incorporates multiple causal earthquakes and ground motion prediction models) to achieve the appropriate spectral variability at periods away from the conditioning period is also highlighted. The findings of this paper are expected theoretically but have not been empirically demonstrated previously. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

16.
在基于性能的地震工程学(PBEE)中,建立概率地震需求模型(PSDM)时需要对桥梁结构的工程需求参数(EDP)进行概率估计。其中,强地面运动参数(IM)的选择对EDP的概率估计影响很大,因此需要正确选择IM。分别采用目前最广泛使用的结构第一模态周期弹性谱加速度(5%阻尼比)Sa(T1,5%)和峰值地面加速度PGA作为IM,选择实际地震波并进行合理的调值,对一座钢筋混凝土桥墩进行IDA分析,其计算结果表明:对于不同性质EDP的概率估计值,以PGA作为IM计算所得的结果明显偏于非保守,且离散度一般也更大。说明可以针对不同性质的EDP,根据地面运动强度的大小,选择不同的IM,通过合理的调值对EDP进行概率估计,可以更加精确、高效地建立PSDM。  相似文献   

17.
以汶川地震为研究背景,针对震后典型钢筋混凝土框架结构进行地震易损性研究。基于Cornell理论框架结合汶川地质资料,拟合出考虑场地特点的地震危险性模型,同时定义损伤水平状态及限值指标,以概率解析易损性研究方法为基础,运用考虑地震动参数的解析易损性评估方法绘制汶川地区钢筋混凝土框架建筑的地震易损性曲线。研究结果表明:考虑地震动参数的概率解析易损性研究方法是一种有效的地震易损性评估方法;以PGA作为地震强度输入指标的结构反应,随自振周期的增大体系最大响应的相关性降低,结构各个损伤状态的失效概率均随之增大。  相似文献   

18.
Seismic fragility curves provide a powerful tool to assess the reliability of structures. However, conventional fragility analysis of structures comprising a large number of components requires enormous computational efforts. In this paper, the application of probabilistic support vector machines (PSVM) for the system fragility analysis of existing structures is proposed. It is demonstrated that support vector machine based fragility curves provide accurate predictions compared to rigorous methodologies such as component based fragilities developed by Monte Carlo simulations. The proposed method is applied to an existing bridge structure in order to develop fragility curves for serviceability and collapse limit states. In addition, the efficiency of using the PSVM method in the application of vector-valued ground motion intensity measures (IM) as well as traditional single-valued IM are investigated. The results obtained from an incremental dynamic analysis of the structure are used to train PSVMs. The application of PSVM in binary and multi-class classifications is used for the fragility analysis and reliability assessment of the bridge structure.  相似文献   

19.
This study develops a framework to evaluate ground motion selection and modification (GMSM) procedures. The context is probabilistic seismic demand analysis, where response history analyses of a given structure, using ground motions determined by a GMSM procedure, are performed in order to estimate the seismic demand hazard curve (SDHC) for the structure at a given site. Currently, a GMSM procedure is evaluated in this context by comparing several resulting estimates of the SDHC, each derived from a different definition of the conditioning intensity measure (IM). Using a simple case study, we demonstrate that conclusions from such an approach are not always definitive; therefore, an alternative approach is desirable. In the alternative proposed herein, all estimates of the SDHC from GMSM procedures are compared against a benchmark SDHC, under a common set of ground motion information. This benchmark SDHC is determined by incorporating a prediction model for the seismic demand into the probabilistic seismic hazard analysis calculations. To develop an understanding of why one GMSM procedure may provide more accurate estimates of the SDHC than another procedure, we identify the role of ‘IM sufficiency’ in the relationship between (i) bias in the SDHC estimate and (ii) ‘hazard consistency’ of the corresponding ground motions obtained from a GMSM procedure. Finally, we provide examples of how misleading conclusions may potentially be obtained from erroneous implementations of the proposed framework. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

20.
This paper characterizes the ability of natural ground motions to induce rocking demands on rigid structures. In particular, focusing on rocking blocks of different size and slenderness subjected to a large number of historic earthquake records, the study unveils the predominant importance of the strong‐motion duration to rocking amplification (ie, peak rocking response without overturning). It proposes original dimensionless intensity measures (IMs), which capture the total duration (or total impulse accordingly) of the time intervals during which the ground motion is capable of triggering rocking motion. The results show that the proposed duration‐based IMs outperform all other examined (intensity, frequency, duration, and/or energy‐based) scalar IMs in terms of both “efficiency” and “sufficiency.” Further, the pertinent probabilistic seismic demand models offer a prediction of the peak rocking demand, which is adequately “universal” and of satisfactory accuracy. Lastly, the analysis shows that an IM that “efficiently” captures rocking amplification is not necessarily an “efficient” IM for predicting rocking overturning, which is dominated by the velocity characteristics (eg, peak velocity) of the ground motion.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号