首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 322 毫秒
1.
Our previous studies show that site effects (amplification of rock motions), source and path effects are coupled when response spectra are used to characterize the amplification ratios for a soil site modelled as nonlinear or elastic. The coupling is referred to as a “side effect” of using response spectral amplification ratios. In the present study we use a suite of rock site records, well distributed with respect to magnitude and source distance, from crustal, subduction interface and slab earthquakes to evaluate the response spectral amplification ratio for soft soil sites. We compare these side-effects for ground motions generated by three types of earthquakes, and we find that, at periods much shorter or much longer than the natural period of a soil site modelled as elastic, the average amplification ratios with respect to rock site ground motions from three types of earthquakes are moderately different and are very similar for other spectral periods. These differences are not statistically significant because of the moderately large scatter of the amplification ratios. However, the extent of magnitude- and source-distance-dependence of amplification ratios differs significantly. After the effects of magnitude and source distance on the amplification ratios are accounted for, the differences in amplification ratios between crustal and subduction earthquake records are very large in some particular combinations of source distance and magnitude range. These findings may have potential impact in establishing design spectra for soft soil sites using strong motion attenuation models or numerical modelling.  相似文献   

2.
In order to determine the effect of geometry on the ground response of 2-dimensional (2-D) basins filled with soils that can develop nonlinear response, we use three basin models with width/depth ratios 3, 6 and 10. The three basins are subjected to a suite of rock site records with various magnitudes and source distances. We compute response spectral amplification ratios at four locations on the surface of the 2-D basins, and determine the average variation of the amplification ratios with respect to excitation spectra, for peak ground acceleration (PGA) and 3 spectral periods of 0.2, 0.5, 1 s. Similarly, we compute the average response spectral amplification ratios for two 1-dimensional (1-D) nonlinear models, one having the soil profile at the basin centre and the other having a soil profile at half the depth of the basin. From the relationship between the average amplification ratios and excitation spectra, we determine the cross-over point in terms of excitation spectral values that separate the amplification range from the deamplification range. Our results show that the cross-over point varies significantly from one location to another on the ground surface and from one basin to another, in a range of 0.3–1.1g for PGA. The effects of basin geometry are very strong at weak and moderate excitation, but decrease with increasing excitation spectra in a significant portion around the basin centre. Our results provide some justification for using 1-D models for 2-D basins with a width/depth ratio ?6 if the soil site is subjected to strong ground shaking.  相似文献   

3.
Under hypothetical and idealized conditions, the horizontal site amplification factor (HSAF) is defined as the ratio of the horizontal Fourier amplitude spectrum (FAS) at a point on the Earth's surface with respect to the horizontal FAS at the identical location but on the outcropping seismological bedrock. The HSAF reflects the profile of local sedimentary soils and weathered rock formations, indicating site effects. In most cases, such an idealized HSAF is difficult to measure directly. Thus, quantitatively estimating a HSAF value is a crucial task in strong-motion prediction over the last century. Fortunately, many strong-motion stations have been constructed throughout Japan, facilitating the characterization of HSAFs down to seismological bedrock at more than 1600 observational sites by the generalized inversion technique (GIT). First, this study reported the similarity distribution of the HSAF and the horizontal-to-vertical spectral ratio of earthquakes (HVSRE). Subsequently, we proposed a hybrid method from a novel aspect for estimating HSAF in terms of the observed similarity distribution and the vertical amplification correction function (VACF) proposed previously. Compared with the direct use of HVSRE for substituting HSAF, the hybrid method proposed herein demonstrated an improvement of greater than 30% in terms of the residuals between estimated HSAFs and those separated from observations.  相似文献   

4.
The available models for eff ective periods of site and structure are reviewed in context of frequency tuning in the inelastic seismic response of soil-structure system. The eff ect of seismic intensity and ductility demand, on the eff ective periods, is investigated, and inelastic site amplifi cation is shown to be strongly correlated to the normalized eff ective period. Two non-dimensional parameters, analogous to the conventional site amplifi cation factors in codes, are defi ned to quantify the inelastic site amplifi cation. It is shown that the inelastic site amplifi cation factor (i.e. ratio of constant ductility spectral ordinates at soil site to those at rock outcrop) is able to represent the site eff ects more clearly, as compared to the inelastic site amplifi cation ratio (i.e. ratio of inelastic spectral ordinates at soil site to the corresponding elastic spectral ordinates at rock outcrop). Further, the peak in the amplifi cation factor corresponding to the eff ective site period diminishes rapidly with increasing ductility demand.  相似文献   

5.
A strong-motion accelerograph array in Santiago, Chile has been installed. One of the sites is located on rock and the other six sites are on soil ground with different surface geology, so that local site effects on ground motions can be studied. As a preliminary evaluation of the site effects, the spectral ratios of weak-motion records at soil sites with respect to the rock site are calculated. The spectral ratios show that the amplification of ground motions with respect to the rock site is approximately 1.25 on dense gravel deposits, 2.5 on stiff pumice ground and 3.5 on soft silt ground.  相似文献   

6.
The site amplifications for three stations, Libin (LIBI), Baisha (BASH) and Yulong (YULG) situated respectively in the southern, middle and northern parts of Lijiang Valley, are obtained by analyzing the S-wave soil/bedrock and microtremor horizontal/vertical spectral ratios. The data are digital recordings for the aftershocks of the Lijiang MS=7.0 earthquake on February 3, 1996. In the frequency range of 1~4 Hz, the S-wave soil/bedrock spectral ratio of E-W component for LIBI is the largest and amounts to 4.5. The microtremor soil N-S/vertical (V) spectral ratio is approximate to 1, E-W/V is about 4.5 and the same with above soil/bedrock spectral ratio. It is shown that the vertical and N-S components of microtremor have not been amplified by the soil and the spectral ratios for BASH and YULG are further evaluated. They have similar characteristics with that of LIBI. In above frequency range, both N-S/V ratios are approximate to 1, while the E-W/V ratio is about 6 for BASH, 4.5 for YULG. Lijiang Valley is characterized by the trans-valley directional site response.  相似文献   

7.
Seismic site amplification studies are generally used to assess the effects of local geology and soil conditions on ground motion characteristics. Although extensive reviews on site amplification phenomena associated with stratigraphic effects can be found in the specialized literature, it should be pointed out that most of the practical applications have been limited to the study of vertically propagating shear horizontal (SH) waves, i.e., to the 1-D soil amplification problem. Furthermore, little attention, if any, has been devoted to the study of the effects of non-vertically incident SH waves on surface accelerograms and on the earthquake response of structures. In the present work, the study is extended to an investigation of 2-D site amplification of non-vertically propagating seismic shear waves in multilayered viscoelastic soil deposits. Sensitivity analyses of the effects of non-vertical incidence on site amplification functions are performed based on site geotechnical data collected from post-seismic investigations of the 1980 El-Asnam earthquake. Analytical results are discussed in terms of seismic site transfer functions, spectral ratios, surface acceleration time histories, and structural response spectra for different values of wave incidence angle. Both bedrock and rock outcropping cases are examined.  相似文献   

8.
Amplitudes of seismic waves increase significantly as they pass through soft soil layers near the earth's surface. This phenomenon, commonly known as site amplification, is a major factor influencing the extent of damage on structures. It is crucial that site amplification is accounted for when designing structures on soft soils. The characteristics of site amplification at a given site can be estimated by analytical models, as well as field tests. Analytical models require as inputs the geometry of all soil layers from surface to bedrock, their dynamic properties (e.g. density, wave velocity, damping), and the incident bedrock motions. Field tests involve recording and analyzing the dynamic response of sites to artificial excitations, ambient forces, and actual earthquakes. The most reliable estimates of site amplification are obtained by analyzing the recorded motions of the site during strong earthquakes. This paper presents a review of the types and the generating mechanisms of site amplification, and the models and methods that are used to characterize them from earthquake records.  相似文献   

9.
10.
Amplification of earthquake-induced seismic waves by soft superficial deposits often causes significant damages in the urban areas. In predicting this effect for large future earthquakes, the linear elastic response of soils is customarily assumed. To check this assumption, we have analyzed surface and downhole acceleration data from the SMART1 and SMART2 strong motion arrays in Taiwan, covering peak accelerations of up to 0·3 g. First, frequency-dependent amplification induced by the alluvial deposits at the SMART1 array was estimated using spectral ratio technique, where the records at rock site were taken as a reference motion. Statistically validated reduction in soil amplification in the strong motion relative to the weak motion in the frequency range between approximately 1 and 9 Hz was detected. Secondly, relative site responses between the Pleistocene and recent sedimentary deposits at the SMART2 array were studied. Relative amplification was shown to be clearly dependent on the excitation level. Thirdly, we compared experimentally recorded uphole/downhole spectral ratios on weak and strong ground motion with the theoretical response yielded by the geotechnical code DESRA2 which assumes hysteretic constitutive relationship of soil. Major symptoms of nonlinear ground behavior predicted by the model were found in the observed data. Back-calculation of the shear wave velocities to the depth of 47 m shows nearly 50% decrease in the strongest quakes, also accounted for by the nonlinear soil behavior.  相似文献   

11.
This paper presents the attenuation relations of peak ground acceleration and spectral accelerations for rock and soil sites in the central and eastern United States (CEUS). For the bedrock site condition, 56 pairs of moment magnitude M and epicentral distance R are used to simulate ground motion, and for each pair of M and R, 550 samples of ground motion parameters are generated using a seismological model together with random vibration theory and distribution of extreme values. From the regression analyses of these data, the attenuation relations of ground motion parameters for the bedrock site are established. With the aid of appropriate site coefficients, these attenuation relations are modified for the site categories specified in the 1994 NEHRP Provisions. These attenuation relations are appropriate for the assessment of seismic hazards at far-field rock and soil sites in the CEUS.  相似文献   

12.
This paper investigates the effects of random variations of soil properties on site amplification of seismic waves. First, based on attenuation laws and the filtered Tajimi–Kanai spectrum, seismic motion at the base rock of a soil site is stochastically generated according to an assumed earthquake with a given magnitude and epicentral distance. Motions on the surface of this layered random soil site are calculated by nonlinear wave propagation methods, and by assuming the incoming seismic wave consisting of SH wave or combined P and SV waves. Soil properties, including shear modulus, damping ratio and mass density, as well as ground water level are considered as random in the numerical calculation. The Rosenblueth method is used to solve the random dynamic responses of the soil site. Parametric calculations are performed to investigate the effects of various parameters on site amplification of seismic waves. The mean and maximum ground motions on surface of the site are estimated. Numerical results indicate that the estimated surface motions differ substantially if the random variations of soil properties and soil saturation level are taken into consideration in the analysis.  相似文献   

13.
Attenuations of the vertical and horizontal response spectra of the 17 October 1989 Loma Prieta, California, earthquake are developed through analyses of the ground motion at 53 sites within a 100 km radius of the source. The analyses are performed on the spectral ordinates for 16 incremental periods ranging from 0.05 to 2.0 sec. The response spectra are modelled empirically for two different site conditions characterized by rock and stiff-soil geologies. Data analysis is performed by the application of a non-linear multivariate regression procedure allowing for distance and site factor as independent variables. Variation of the vertical-to-horizontal (V/H) spectral ratios with wave frequency and distance shows the same behaviour as observed previously in the widely separated geographic regions of northeastern Taiwan and east-central Iran. The predicted ratios at sites underlain by stiff soil are generally higher than the commonly used value of 2/3 at high frequencies ( > 5 Hz) in the near-source region (R < 30 km), but reduce to 1/2 or less at longer periods and farther distances. This behaviour is also observed at rock sites; however, it is somewhat less pronounced. With a faster attenuation of spectral ordinates at higher frequencies, the shape of the response spectrum is found to change with distance. As expected, the spectral attenuation with distance is generally higher for the vertical spectrum than for the horizontal spectrum. The difference is particularly significant at the higher-frequency end of spectrum. Site amplification factors for stiff soil with respect to rock geology varies between 1.17 and 1.72 for horizontal spectrum and 1.01 and 1.81 for vertical spectrum. Spectral amplifications at four sites underlain by soft soil and artificial fill, are also evaluated. This is done by a comparison of the observed spectra with those predicted for rock geology at corresponding distances. As expected, the resulting amplification factors at soft-soil sites show significant increase relative to those at sites underlain by rock.  相似文献   

14.
This paper summarizes the results of a comprehensive statistical study aimed at evaluating peak lateral inelastic displacement demands of structures with known lateral strength and stiffness built on soft soil site conditions. For that purpose, empirical information on inelastic displacement ratios which are defined as the ratio of peak lateral inelastic displacement demands to peak elastic displacement demands are investigated. Inelastic displacement ratios were computed from the response of single‐degree‐of‐freedom systems having 6 levels of relative lateral strength when subjected to 118 earthquake ground motions recorded on bay‐mud sites of the San Francisco Bay Area and on soft soil sites located in the former lake‐bed zone of Mexico City. Mean inelastic displacement ratios and their corresponding scatter are presented for both ground motion ensembles. The influence of period of vibration normalized by the predominant period of the ground motion, the level of lateral strength, earthquake magnitude, and distance to the source are evaluated and discussed. In addition, the effects of post‐yield stiffness and of stiffness and strength degradation on inelastic displacement ratios are also investigated. It is concluded that magnitude and distance to the source have negligible effects on constant‐strength inelastic displacement ratios. Results also indicate that weak and stiffness‐degrading structures in the short spectral region could experience inelastic displacement demands larger than those corresponding to non‐degrading structures. Finally, a simplified equation obtained using regression analyses aimed at estimating mean inelastic displacement ratios is proposed for assisting structural engineers in performance‐based assessment of structures built on soft soil sites. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

15.
— We estimate the theoretical site response along seven cross sections located in the city of Thessaloniki (Greece). For this purpose the 2-D structural models used are based on the known geometry and the dynamic soil properties derived from borehole measurements and other geophysical techniques. Several double-couple sources have been employed to generate the seismic wavefield, and a hybrid method that combines the modal summation with finite differences, has been deployed to produce synthetic accelerograms to a maximum frequency of 6 Hz for all components of motion. The ratios between the response spectra of signals derived for the 2-D local model and the corresponding spectra of signals derived for the 1-D bedrock reference model at the same site, allow us to estimate the site response due to lateral heterogeneities. We interpret the results in terms of both geological and geometrical features of the models and of the characteristics of the wave propagation. The cases discussed confirm that the geometry and depth of the rock basement, along with the impedance contrast, are responsible for ground amplification phenomena such as edge effects and generation and entrapment of local surface waves. Our analysis also confirms that the peak ground acceleration is not well correlated with damage and that a substantially better estimator for possible damage is the spectral amplification.  相似文献   

16.
In this paper, empirical ground-motion models for the vertical and average horizontal components of peak ground-motion and acceleration response spectra from shallow crustal earthquakes are derived using near-source database. These attenuation relationships were derived using a worldwide dataset consisted of corrected and processed accelerograms of 678 strong-motion records recorded with 60 km of the rupture plane of earthquakes between Mw 5.2 and 7.9. Ground motion models are functions of earthquake mechanism, distance from source to site, local average shear wave velocity, nonlinear soil response, sediment depth, depth-to-top of the rupture, hanging wall effects and faulting mechanism.  相似文献   

17.
Seven sites were instrumented in the Parsa area located in the seismically active Dead Sea rift system. Moderate and weak motions generated by earthquakes and ambient noise were used to identify amplifications due to geological and topographic effects.Three observation methods were applied to estimate site effects: (1) conventional soil–bedrock station-pair spectral ratios for earthquake motions and microtremors; (2) horizontal-to-vertical component spectral ratios for shear-waves observed simultaneously at a site (receiver function estimates) and (3) horizontal-to-vertical spectral ratios of microtremor measurements (Nakamura estimate). The site response spectra of soil sites exhibited significant peaks between 1 and 3 Hz with amplification factors typically within the range of 2.5–4.0. A bedrock site on the high plateau near the escarpment top showed a peak between 2 and 3 Hz, mainly due to an EW oscillation of the NS topographic feature. Our observations indicated that seismograms recorded in the tunnel were either enriched or depleted at certain frequencies owing to interference of incident and surface-reflected waves.  相似文献   

18.
Results of an analytical study aimed at evaluating residual displacement ratios, Cr, which allow the estimation of residual displacement demands from maximum elastic displacement demands is presented. Residual displacement ratios were computed using response time‐history analyses of single‐degree‐of‐freedom systems having 6 levels of relative lateral strength when subjected to an ensemble of 240 earthquake ground motions recorded in stations placed on firm sites. The results were statistically organized to evaluate the influence of the following parameters: period of vibration, level of relative lateral strength, site conditions, earthquake magnitude, and distance to the source. In addition, the influence of post‐yield stiffness ratio in bilinear systems and of the unloading stiffness in stiffness‐degrading systems was also investigated. A special emphasis is given to the uncertainty of these ratios. From this study, it is concluded that mean residual displacement ratios are more sensitive to changes in local site conditions, earthquake magnitude, distance to the source range and hysteretic behaviour than mean inelastic displacement ratios. In particular, residual displacement ratios exhibit large levels of record‐to‐record variability and, therefore, this dispersion should be taken into account when estimating residual displacements. A simplified expression is presented to estimate mean residual displacements ratios for elastoplastic systems during the evaluation of existing structures built on firm soil sites. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

19.
Earthquake ground-motion relationships for soil and rock sites in Iran have been developed based on the specific barrier model (SBM) used within the context of the stochastic modeling and calibrated against up-to-date Iranian strong-motion data. A total of 171 strong-motion accelerograms recorded at distances of up to 200 km from 24 earthquakes with moment magnitudes ranging from Mw 5.2 to 7.4 are used to determine the region-specific source parameters of this model. Regression analysis was conducted using the “random effects” methodology that considers both earthquake-to-earthquake (inter-event) variability and within-earthquake (intra-event) variability to effectively handle the problem of weighting observations from different earthquakes. The minimization of the error function in each iteration of the “random effects” procedure was performed using the genetic algorithm method. The residuals are examined against available Iranian strong-motion data to confirm that the model predictions are unbiased and that there are no significant residual trends with distance and magnitude. No evidence of self-similarity breakdown is observed between the source radius and its seismic moment. To verify the robustness of the results, tests were performed to confirm that the results are unchanged if the number of observations is changed by removing different randomly selected datasets from the original database. Stochastic simulations, using the derived SBM, are then performed to predict peak ground-motion and response spectra parameters for a wide range of magnitudes and distances. The stochastic SBM predictions agree well with the new empirical regression equations proposed for Iran, Europe and Middle East in the magnitude–distance ranges well represented by the data. It has been shown that the SBM of this study provides unbiased ground-motion estimates over the entire frequency range of most engineering interests (1–10 Hz) for the Iranian earthquakes. Our results are also important for the assessment of hazards in other seismically active environments in the Middle East and Mediterranean regions.  相似文献   

20.
局部场地条件对地震动特性影响显著,深厚的软弱覆盖层引起的地震动场地效应会显著放大中长周期反应谱。采用谱比法,对2020年7月12日唐山古冶5.1级地震中获得的部分强震动记录进行统计,发现在本次地震中北京城区的地震动场地效应显著,深厚覆盖层明显放大了加速度反应谱,在T=1.2 s左右反应谱放大倍数可达4.0,说明北京地区的场地和盆地效应使得远场地震动的中长周期成分显著放大。此外,发现参考基岩场地记录是否与土层场地处遭受的基岩地震动一致,仍然是制约统计结果可靠性的关键因素。   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号