首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 267 毫秒
1.
The recent earthquake sequences of 2012 (northern Italy) and 2013 (Marche offshore) provided new, fundamental constraints to the active tectonic setting of the outer northern Apennines. In contrast to the Po Plain area, where the 2012 northern Italy earthquakes confirmed active frontal thrusting, the new focal mechanisms obtained in this study for the 2013 Marche offshore earthquakes indicate that only minor thrust fault reactivation occurs in the Adriatic domain, even for a theoretically favourably oriented maximum horizontal compression. Recent seismicity in this domain appears to be mainly controlled by transcurrent crustal faults dissecting the Apennine thrust belt. The along-strike stress field variation from the Po Plain to the Adriatic area has been quantitatively investigated by applying the multiple inverse method (MIM) to the analysis of the entire seismicity recorded from January 1976 to August 2014, from the top 12 km of the crust (fault plane solutions from 127 earthquakes with MW  4), allowing us to obtain a comprehensive picture of the state of stress over the outer zone of the fold and thrust belt. The present-day stress field has been defined for 39 cells of 1.5° × 1.5° surface area and 12 km depth. The obtained stress field maps point out that, although the entire outer northern Apennines belt is characterized by a sub-horizontal maximum compressive axis (σ1), the minimum compression (σ3) is sub-vertical only in the Po Plain area, becoming sub-horizontal in the Adriatic sector, thus confirming that the latter region is dominated by an active tectonic regime of strike-slip type.  相似文献   

2.
Two-dimensional crustal velocity models are derived from passive seismic observations for the Archean Karelian bedrock of north-eastern Finland. In addition, an updated Moho depth map is constructed by integrating the results of this study with previous data sets. The structural models image a typical three-layer Archean crust, with thickness varying between 40 and 52 km. P wave velocities within the 12–20 km thick upper crust range from 6.1 to 6.4 km/s. The relatively high velocities are related to layered mafic intrusive and volcanic rocks. The middle crust is a fairly homogeneous layer associated with velocities of 6.5–6.8 km/s. The boundary between middle and lower crust is located at depths between 28 and 38 km. The thickness of the lower crust increases from 5–15 km in the Archean part to 15–22 km in the Archean–Proterozoic transition zone. In the lower crust and uppermost mantle, P wave velocities vary between 6.9–7.3 km/s and 7.9–8.2 km/s. The average Vp/Vs ratio increases from 1.71 in the upper crust to 1.76 in the lower crust.The crust attains its maximum thickness in the south-east, where the Archean crust is both over- and underthrust by the Proterozoic crust. A crustal depression bulging out from that zone to the N–NE towards Kuusamo is linked to a collision between major Archean blocks. Further north, crustal thickening under the Salla and Kittilä greenstone belts is tentatively associated with a NW–SE-oriented collision zone or major shear zone. Elevated Moho beneath the Pudasjärvi block is primarily explained with rift-related extension and crustal thinning at ∼2.4–2.1 Ga.The new crustal velocity models and synthetic waveform modelling are used to outline the thickness of the seismogenic layer beneath the temporary Kuusamo seismic network. Lack of seismic activity within the mafic high-velocity body in the uppermost 8 km of crust and relative abundance of mid-crustal, i.e., 14–30 km deep earthquakes are characteristic features of the Kuusamo seismicity. The upper limit of seismicity is attributed to the excess of strong mafic material in the uppermost crust. Comparison with the rheological profiles of the lithosphere, calculated at nearby locations, indicates that the base of the seismogenic layer correlates best with the onset of brittle to ductile transition at about 30 km depth.We found no evidence on microearthquake activity in the lower crust beneath the Archean Karelian craton. However, a data set of relatively well-constrained events extracted from the regional earthquake catalogue implies a deeper cut-off depth for earthquakes in the Norrbotten tectonic province of northern Sweden.  相似文献   

3.
Many authors have proposed that the study of seismicity rates is an appropriate technique for evaluating how close a seismic gap may be to rupture. We designed an algorithm for identification of patterns of significant seismic quiescence by using the definition of seismic quiescence proposed by Schreider (1990). This algorithm shows the area of quiescence where an earthquake of great magnitude may probably occur. We have applied our algorithm to the earthquake catalog on the Mexican Pacific coast located between 14 and 21 degrees of North latitude and 94 and 106 degrees West longitude; with depths less than or equal to 60 km and magnitude greater than or equal to 4.3, which occurred from January, 1965 until December, 2014. We have found significant patterns of seismic quietude before the earthquakes of Oaxaca (November 1978, Mw = 7.8), Petatlán (March 1979, Mw = 7.6), Michoacán (September 1985, Mw = 8.0, and Mw = 7.6) and Colima (October 1995, Mw = 8.0). Fortunately, in this century earthquakes of great magnitude have not occurred in Mexico. However, we have identified well-defined seismic quiescences in the Guerrero seismic-gap, which are apparently correlated with the occurrence of silent earthquakes in 2002, 2006 and 2010 recently discovered by GPS technology.  相似文献   

4.
Historical and active seismicity in the south-western Alps (France and Italy) shows the recurrence of relatively high-magnitude earthquakes (M  5.8), like the one that recently affected the Italian Apennine range (M = 6.3 on the 30th March 2009). However, up-to-date detailed mapping of the active fault network has been poorly established. The evaluation of seismological hazard in particular in the highly populated French and Italian coastal region cannot be done without this. Here, we present a detailed study of the main active fault system, based on geological observations along the south-western flank of the Alpine arc. This N140° right-lateral strike-slip active fault system runs along the edge of the Argentera-Mercantour range and can be followed down to the Mediterranean Sea. It is evidenced by (1) Holocene offsets of glacial geomorphology witnessing ongoing fault activity since 10 ka, (2) widespread recent (10–20 Ma) pseudotachylytes featuring long term activity of the faults, (3) active landslides along the main fault zone, (4) geothermal anomalies (hot springs) emerging in the active faults, (5) ongoing low-magnitude seismic activity and (6) localization of the main historical events. In the light of our investigations, we propose a new tectonic pattern for the active fault system in the south-western Alps.  相似文献   

5.
Inversion of local earthquake travel times and joint inversion of receiver functions and Rayleigh wave group velocity measurements were used to derive a simple model for the velocity crustal structure beneath the southern edge of the Central Alborz (Iran), including the seismically active area around the megacity of Tehran. The P and S travel times from 115 well-located earthquakes recorded by a dense local seismic network, operated from June to November 2006, were inverted to determine a 1D velocity model of the upper crust. The limited range of earthquake depths (between 2 km and 26 km) prevents us determining any velocity interfaces deeper than 25 km. The velocity of the lower crust and the depth of the Moho were found by joint inversion of receiver functions and Rayleigh wave group velocity data. The resulting P-wave velocity model comprises an upper crust with 3 km and 4 km thick sedimentary layers with P wave velocities (Vp) of ~5.4 and ~5.8 km s?1, respectively, above 9 km and 8 km thick layers of upper crystalline crust (Vp ~6.1 and ~6.25 km s?1 respectively). The lower crystalline crust is ~34 km thick (Vp  6.40 km s?1). The total crustal thickness beneath this part of the Central Alborz is 58 ± 2 km.  相似文献   

6.
7.
There are two main ocean-ridge discontinuities in Iceland: the Tjörnes Fracture Zone (TFZ) and the South Iceland Seismic Zone (SISZ). The TFZ is a 120-km-long and as much as 70-km-wide WNW-trending zone of high seismicity. It has three main seismic lineaments: the Husavik-Flatey Fault (HFF), the Dalvik lineament, and the Grimsey lineament. The HFF, a dextral strike-slip fault and active as a transform fault for about 9 Ma, has a cumulative transform-parallel displacement of some 60 km. Offshore, the HFF is marked by a transform (fracture-zone) valley, 5–10 km wide and 3–4 km deep. Onshore the Flateyjarskagi Peninsula the HFF is marked by a 3–5-km-wide zone of intense crustal deformation with numerous strike-slip and normal faults, transform-parallel dykes, dense sets of mineral veins, and subzones of completely crushed rocks, that is, fault cores. Where the HFF comes on land on Tjörnes there is a similar, but much thinner, zone of crushed rocks. The seismic lineaments are located a few tens of kilometres south (Dalvik) and north (Grimsey) of, and run subparallel with, the HFF. Both lineaments are composed of sets of NNW-trending sinistral faults arranged en echelon.The SISZ is a 70-km-long and 10–20-km wide zone of almost continuous seismicity located between the overlapping West and East Volcanic Zones. It produces the largest earthquakes in Iceland, some of which exceed M7, during which the N–S width of the zone may be as great as 50–60 km. The SISZ is partly covered with Holocene lava flows where the seismogenic faults occur as dextral NNE-trending and sinistral ENE-trending conjugate arrays with push-ups between their nearby ends. The same fault-segment trends occur in the Pleistocene pile north of the Holocene lava flows.The HFF is neither perpendicular to the nearby ridge segments nor parallel with the spreading vector. As a consequence, the North Volcanic Zone has propagated to the north and the Kolbeinsey Ridge to the south during the past 1 Ma, resulting in the development of the Grimsey and Dalvik lineaments. Similarly, the tip of the East Volcanic Zone has been propagating rapidly to the southwest during the past 3 Ma. The tip has been at its present location for no more than several hundred thousand years, thus making the SISZ less stable than the HFF. If the propagation of the tip of the East Volcanic Zone continues, it will eventually reach the Reykjanes Ridge, whereby either the West or the East Volcanic Zone becomes extinct. Then the SISZ dies out as a major seismic zone.  相似文献   

8.
The Ganzi-Yushu-Xianshuihe Fault Zone (GYXFZ) is a typical active strike-slip fault that has triggered many large historic earthquakes, including the 2010 Mw 6.9 Yushu earthquake in the central Tibetan Plateau. This fault zone extends for ca. 800 km from the central Tibetan Plateau to its southeastern margin and varies in trend from WNW-ESE in the northwestern segment of the fault zone to NNW-SSE in the southeastern segment, having the geometry of an arc projecting northeastwards. In this study, we present evidence for the systematical sinistral deflection and/or offset of the Yangtze River and its branch stream channels and valleys along the GYXFZ. Topographic analysis of three-dimensional (3D) perspective images constructed using digital elevation model (DEM) data, 0.5 m-resolution WorldView and GeoEye images, and 15 m-resolution Landsat-Enhanced Thematic Mapper (ETM+) images, together with analysis of geological structures, reveals the following: (i) the main river channels and valleys of the Yangtze River drainage system show systematic sinistral deflections and/or offsets along the GYXFZ; (ii) various amounts of sinistral offset have accumulated on the tributary stream channels, valleys, and gullies of the Yangtze River along the fault, with a linear relation, D = aL, between the upstream length L from the deflected point and the offset amount D with a certain coefficient a; (iii) the maximum amount of sinistral offset is up to ca. 60 km, which was accumulated in the past 13–5 Ma; and (iv) the long-term average strike-slip rate is ca. 4.6–12 mm/year. Geological and geomorphic evidence, combined with geophysical data, demonstrates that the GYXFZ is currently active as one of the major seismogenic faults in the Tibetan Plateau, dominated by left-lateral strike-slip motion. Our findings supply important evidence for the tectonic evolution of strike-slip faults in the Tibetan Plateau since the Eurasia-India continental collision.  相似文献   

9.
This is an attempt to analyze the current lithospheric stress pattern in the Baikal rift in terms of nonlinear dynamics as an open self-organizing system in order to gain more insights into the general laws of regional seismicity. According to the suggested approach, the stress pattern inferred from seismic moments of 70,000 MLH  2.0 events that occurred in the region between 1968 and 1994 is presented as a phase portrait in the phase spaces of the seismic moments. The obtained phase portrait of the system evolution fits well a scenario with triple equilibrium bifurcation where stress bifurcations account for the frequency of M > 5.5 earthquakes. Extrapolation of the results into the nearest future indicates probability of such a bifurcation (a catastrophe of stress), i.e., there is growing risk that M  7 events may happen in the region within a few years.  相似文献   

10.
The proper evaluation of crustal deformations in the Aswan (Egypt) region is crucial due to the existence of one major artificial structure: the Aswan High Dam. This construction induced the creation of one of the major artificial lakes: Lake Nasser, which has a surface area of about 5200 km2 with a maximum capacity of 165 km3. The lake is nearly 550 km long (more than 350 km within Egypt and the remainder in Sudan) and 35 km across at its widest point. Great attention has focused on this area after the November 14, 1981 earthquake (ML = 5.7), with its epicenter southwest of the High Dam.In order to evaluate the present-day kinematics of the region, its relationship with increasing seismicity, and the possible influence of the Aswan High Dam operation, a network of 11 GPS sites was deployed in the area. This network has been reobserved every year since 2000 in campaign style. We present here the results of the analysis of the GPS campaign time-series. These time-series are already long enough to derive robust solutions for the motions of these stations. The computed trends are analyzed within the framework of the geophysical and geological settings of this region. We show that the observed displacements are significant, pointing to a coherent intraplate extensional deformation pattern, where some of the major faults (e.g., dextral strike-slip Kalabsha fault and normal Dabud fault) correspond to gradients of the surface deformation field. We also discuss the possible influence of the water load on the long-term deformation pattern.  相似文献   

11.
This study provides evidence for post-5 Ma shortening in the transition area between the Dinarides fold-and-thrust belt and the Pannonian Basin and reviews possible earthquake sources for the Banja Luka epicentral area (northern Bosnia and Herzegovina) where the strongest instrumentally recorded earthquake (ML 6.4) occurred on 27 October 1969. Geological, geomorphological and reflection seismic data provide evidence for a contractional reactivation of Late Palaeogene to Middle Miocene normal faults at slip rates below 0.1 mm/a. This reactivation postdates deposition of the youngest sediments in the Pannonian Basin of Pontian age (c. 5 Ma). Fault plane solutions for the main 1969 Banja Luka earthquake (ML 6.4) and its largest foreshock (ML 6.0) indicate reverse faulting along ESE–WNW-striking nodal planes and generally N–S trending pressure axes. The spatial distribution of epicentres and focal depths, analyses of the macroseismic field and fault-plane solutions for several smaller events suggest on-going shortening in the internal Dinarides. Seismic deformation of the upper crust is also associated with strike-slip faults, likely related to the NE–SW trending, sinistral Banja Luka fault. Possibly, this fault transfers contraction between adjacent segments of the Dinarides thrust system. The study area represents the seismically most active region of the Dinarides apart from the Adriatic Sea coast and the bend zone around Zagreb. We propose that on-going thrusting in the internal Dinarides thrust system takes up a portion of the current Adria–Europe convergence.  相似文献   

12.
R/S analysis is used in this work to investigate the fractal correlations in terms of the Hurst exponent for the 1998–2011 seismicity data in Southern Mexico. This region is the most seismically active area in Mexico, where epicenters for severe earthquakes (e.g., September 19, 1985, Mw = 8.1) causing extensive damage in highly populated areas have been located. By only considering the seismic events that meet the Gutenberg–Ritcher law completeness requirement (b = 0.97, MGR = 3.6), we found time clustering for scales of about 100 and 135 events. In both cases, a cyclic behavior with dominant spectral components at about one cycle per year is revealed. It is argued that such a one-year cycle could be related to tidal effects in the Pacific coast. Interestingly, it is also found that high-magnitude events (Mw  6.0) are more likely to occur under increased interevent correlations with Hurst exponent values H > 0.65. This suggests that major earthquakes can occur when the tectonic stress accumulates in preferential directions. In contrast, the high-magnitude seismic risk is reduced when stresses are uniformly distributed in the tectonic shell. Such cointegration between correlations (i.e., Hurst exponent) and macroseismicity is confirmed for spatial variations of the Hurst exponent. In this way, we found that, using the Hurst exponent standpoint, the former presumed Michoacan and the Guerrero seismic gaps are the riskiest seismic zones. To test this empirical finding, two Southern Mexico local regions with large earthquakes were considered. These are the Atoyac de Alvarez, Guerrero (Mw = 6.3), and Union Hidalgo, Oaxaca (Mw = 6.6), events. In addition, we used the Loma Prieta, California, earthquake (October 17, 1989, Mw = 6.9) to show that the high-magnitude earthquakes in the San Andreas Fault region can also be linked to the increments of determinism (quantified in terms of the Hurst exponent) displayed by the stochastic dynamics of the interevent period time series. The results revealed that the analysis of seismic activity by means of R/S analysis could provide further insights in the advent of major earthquakes.  相似文献   

13.
Serpentinization of the mantle wedge is an important process that influences the seismic and mechanical properties in subduction zones. Seismic detection of serpentines relies on the knowledge of elastic properties of serpentinites, which thus far has not been possible in the absence of single-crystal elastic properties of antigorite. The elastic constants of antigorite, the dominant serpentine at high-pressure in subduction zones, were measured using Brillouin spectroscopy under ambient conditions. In addition, antigorite lattice preferred orientations (LPO) were determined using an electron back-scattering diffraction (EBSD) technique. Isotropic aggregate velocities are significantly lower than those of peridotites to allow seismic detection of serpentinites from tomography. The isotropic VP/VS ratio is 1.76 in the Voigt–Reuss–Hill average, not very different from that of 1.73 in peridotite, but may vary between 1.70 and 1.86 between the Voigt and Reuss bonds. Antigorite and deformed serpentinites have a very high seismic anisotropy and remarkably low velocities along particular directions. VP varies between 8.9 km s? 1 and 5.6 km s? 1 (46% anisotropy), and 8.3 km s? 1 and 5.8 km s? 1 (37%), and VS between 5.1 km s? 1 and 2.5 km s? 1 (66%), and 4.7 km s? 1 and 2.9 km s? 1 (50%) for the single-crystal and aggregate, respectively. The VP/VS ratio and shear wave splitting also vary with orientation between 1.2 and 3.4, and 1.3 and 2.8 for the single-crystal and aggregate, respectively. Thus deformed serpentinites can present seismic velocities similar to peridotites for wave propagation parallel to the foliation or lower than crustal rocks for wave propagation perpendicular to the foliation. These properties can be used to detect serpentinite, quantify the amount of serpentinization, and to discuss relationships between seismic anisotropy and deformation in the mantle wedge. Regions of high VP/VS ratios and extremely low velocities in the mantle wedge of subduction zones (down to about 6 and 3 km.s?1 for VP and VS, respectively) are difficult to explain without strong preferred orientation of serpentine. Local variations of anisotropy may result from kilometer-scale folding of serpentinites. Shear wave splittings up to 1–1.5 s can be explained with moderately thick (10–20 km) serpentinite bodies.  相似文献   

14.
We present a catalog of moment tensor (MT) solutions and moment magnitudes, Mw, for 119 shallow (h  40 km) earthquakes in Greece and its surrounding lands (34°N–42°N, 19°E–30°E) for the years 2006 and 2007, computed with the 1D Time-Domain Moment Tensor inversion method (TDMT_INV code of Dreger, 2003). Magnitudes range from 3.2  Mw  5.7. Green's functions (GF) have been pre-computed to build a library, for a number of velocity profiles applicable to the broader Aegean Sea region, to be used in the inversion of observed broad band waveforms (10–50 s). All MT solutions are the outcome of a long series of tests of different reported source locations and hypocenter depths. Quality factors have been assigned to each MT solution based on the number of stations used in the inversion and the goodness of fit between observed and synthetic waveforms. In general, the focal mechanisms are compatible with previous knowledge on the seismotectonics of the Aegean area. The new data provide evidence for strike-slip faulting along NW–SE trending structures at the lower part of Axios basin, close to the heavily industrialized, and presently subsiding, region of the city of Thessaloniki. Normal faulting along E–W trending planes is observed at the Strimon basin, and in Orfanou Gulf in northern Greece. A sequence of events in the east Aegean Sea close to the coastline with western Anatolia sheds light on an active structure bounding the north coastline of Psara–Chios Islands about 20–25 km in length exhibiting right lateral strike-slip faulting.  相似文献   

15.
The seismic history of the city of Ragusa (Italy), the geotechnical characterisation of the subsoil and the site response analysis should be correctly evaluated for the definition of the Seismic Geotechnical Hazard of the city of Ragusa, through geo-settled seismic microzoning maps. Basing on the seismic history of the city of Ragusa, the following earthquake scenarios have been considered: the “Val di Noto” earthquake of January 11, 1693 (with intensity X–XI on MCS scale, magnitude MW=7.41 and epicentral distance of about 53 km); the “Etna” earthquake of February 20, 1818 (with intensity IX on MCS scale, magnitude MW=6.23 and epicentral distance of about 64 km); the Vizzini earthquake of April 13, 1895 (with intensity I=VII–VIII on MCS scale, magnitude MW=5.86 and epicentral distance of about 26 km); the “Modica” earthquake of January 23, 1980 (with intensity I=V–VI on MCS scale, magnitude MW=4.58 and epicentral distance of about 10 km); the “Sicilian” earthquake of December 13, 1990 (with intensity I=VII on MCS scale, magnitude MW=5.64 and epicentral distance of about 50 km). Geotechnical characterisation has been performed by in situ and laboratory tests, with the definition of shear wave velocity profiles in the upper 30 m of soil. Soil response analyses have been evaluated for about 120 borings location by some non-linear 1-D models. Finally the seismic microzonation of the city of Ragusa has been obtained in terms of maps with different peak ground acceleration at the surface; shaking maps for the central area of the city of Ragusa were generated via GIS for the earthquake scenarios.  相似文献   

16.
Ground motion intensity measures such as the peak ground acceleration (PGA) and the pseudo-spectral acceleration (PSA) at two sites due to the same seismic event are correlated. The spatial correlation needs to be considered when modeling ground-motion fields for seismic loss assessments, since it can have a significant influence on the statistical moments and probability distribution of aggregated seismic loss of a building portfolio.Empirical models of spatial correlation of ground motion intensity measures exist only for a few seismic regions in the world such as Japan, Taiwan and California, since for this purpose a dense observation network of earthquake ground motion is required. The Istanbul Earthquake Rapid Response and Early Warning System (IERREWS) provides one such dense array with station spacing of typically 2 km in the urban area of Istanbul. Based on the records of eight small to moderate (Mw3.5–Mw5.1) events, which occurred since 2003 in the Marmara region, we establish a model of intra-event spatial correlation for PGA and PSA up to the natural period of 1.0 s.The results indicate that the correlation coefficients of PGA and short-period PSA decay rapidly with increasing interstation distance, resulting in correlation lengths of approximately 3–4 km, while correlation lengths at longer natural periods (above 0.5 s) exceed 6 km. Finally, we implement the correlation model in a Monte Carlo simulation to evaluate economic loss in Istanbul's district Zeytinburnu due to a Mw7.2 scenario earthquake.  相似文献   

17.
The strong earthquake (M = 7) that occurred in the Fucino basin (central Italy) on January 13, 1915 was followed by six earthquakes of M > 5.5 and several other shocks of M > 5 in the major seismic zones of the northern Apennines from 1916 to 1920. This seismicity pattern is consistent with the implications of the present tectonic setting in the study area, which suggests that strong decoupling earthquakes in the central Apennines cause a significant increase of tectonic load, and possibly of seismicity, in the northern Apennines. A numerical simulation, carried out by an elastic-viscous model, of the stress diffusion induced by the Fucino and successive largest earthquakes, shows that each of the above shocks occurred when the respective zone was reached by the highest values of the strain and strain rate perturbation triggered by the previous events. Furthermore, the computed strain regime at each earthquake site is consistent with the known faulting pattern. The results provide important insights into the physical mechanism that controls the interaction of seismic sources in the central and northern Apennines.  相似文献   

18.
The late Triassic to early Tertiary Coast Mountains Batholith (CMB) of British Columbia provides an ideal locale to study the processes whereby accreted terranes and subduction-related melts interact to form stable continental crust of intermediate to felsic composition and complementary ultramafic residuals. Seismic measurements, combined with calculated elastic properties of various CMB rock compositions, provide a window into the deep-crustal lithologies that are key to understanding the processes of continental growth and evolution. We use a combination of seismic observations and petrologic modeling to construct hypothetical crustal sections at representative locations across the CMB, then test the viability of these sections via forward modeling with synthetic seismic data. The compositions that make up our petrologic forward models are based on calculations using the free energy minimization program Perple_X to predict mineral assemblages at depth for the bulk compositions of exposed plutonic rocks collected in the study area. Seismic data were collected along two transects in west-central British Columbia: a southern line that crossed the CMB near the town of Bella Coola (near 52° N), and a northern line centered on the towns of Terrace and Kitimat (near 54° N). Along both transects, seismic receiver functions reveal high Vp/Vs ratios near the Insular/Intermontane terrane boundary and crustal thickness increasing from 26 ± 3 km to 34 ± 3 km (at the 1 sigma certainty level) from west to east across the Coast Shear Zone (CSZ). On the southern line, we observe an anomalous region of complex receiver functions and diminished Moho signals beneath the central portion of the CMB. Our petrologic and seismic profiles show that observed seismic data from much of the CMB can be well-matched in terms of crustal thickness and structure, average Vp/Vs, and amplitude of the Moho converted phase, without including ultramafic residual material in the lower crust.  相似文献   

19.
The elastic moduli of polycrystalline ringwoodite, (Mg0.91Fe0.09)2SiO4, were measured up to 470 K by means of the resonant sphere technique. The adiabatic bulk (KS) and shear (μ) moduli were found to be 185.1(2) and 118.22(6) GPa at room temperature, and the average slopes of dKS/dT and dμ/dT in the temperature range of the study were determined to be −0.0193(9) and −0.0148(3) GPa/K, respectively. Using these results, we estimate seismic wave velocity jumps for a pure olivine mantle model at 520 km depth. We find that the jump for the S-wave velocity is about 1.5 times larger than that for the P-wave velocity at this depth. This suggests that velocity jumps at the 520 km discontinuity are easier to detect using S-waves than P-waves.  相似文献   

20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号