共查询到20条相似文献，搜索用时 31 毫秒
1.
W. F. Brace 《Pure and Applied Geophysics》1978,116(4-5):603-614
Summary Volume changes in geologic materials have been measured with strain gauges, cantilever displacement gauges, or through observation of either pore or total volume. When porosity is less than 0.05, compaction is small or absent; apart from elastic strains in the minerals, dilatancy predominates, beginning at 50 to 75 percent of the fracture stress difference. When initial porosity exceeds about 0.05, compaction and dilatancy may overlap. The onset of dilatancy has not been identified, but most of the dilatancy occurs within about 10 percent of the fracture stress difference. In low porosity rocks, dilatancy increases initial porosity by a factor of 2 or more; in porous rocks or granular aggregates the increase is only 20 to 50 percent. However, the actual pore volume increase is larger in rocks of high initial porosity. Hence, earthquake precursors which depend on the magnitude of dilatancy should be more pronounced in porous rocks or in fault gouge. In contrast, precursors which are based on fractional changes in some porosity-related property may be more pronounced in rocks of low initial porosity. Future work is particularly needed on constitutive relations suitable for major classes of rocks, on the effects of stress cycling in porous rocks, on the effects of high temperature and pore fluids on dilatancy and compaction, and on the degree of localization of strain prior to fracture. 相似文献
2.
We present a model for pore spaces that consists of two parts related by duality: (1) a decomposition of an open polyhedral pore space into open contractible pore bodies separated by relatively open interfaces and (2) a pore network that is homotopy equivalent to the pore space. The dual model is unique and free of parameters, but it relies on regularity conditions for the pore space. We show how to approximate any pore space by the interior of a polyhedral complex such that the regularity conditions are fulfilled. Thus, we are able to calculate the dual model from synthetic porous media and images of real porous media. The pore bodies are unions of relatively open Delaunay cells with respect to the corners of the pore boundary, and the pore network consists of certain at most two-dimensional (2D) Voronoi cells with respect to the corners of the pore boundary. The pore network describes the neighborhood relations between the pore bodies. In particular, any relatively open 2D Delaunay face f separating two pore bodies has a unique (relatively open) dual network edge. In our model, f is a pore throat only if it is hit by its dual network edge. Thus, as opposed to widespread intuition, any pore throat is convex, and adjacent pore bodies are not necessarily separated by pore throats. Due to the duality between the pore network and the decomposition of the pore space into pore bodies it is straightforward to store the geometrical properties of the pore bodies [pore throats] as attributes of the dual network vertices [edges]. Such an attributed network is used to perform 2D drainage simulations. The results agree very well with those from a pore-morphology based modeling approach performed directly on the digital image of a porous medium. Contractibility of the pore bodies and homotopy equivalence of the pore space and the pore network is proven using discrete Morse theory and the nerve theorem from combinatorial topology. 相似文献
3.
This paper presents application of a series of algorithms used to extract pore network structure from high-resolution three-dimensional synchrotron microtomography images of unconsolidated porous media systems. These algorithms are based on the three-dimensional skeletonization that simplifies the pore space to networks in the form of nodes connected to paths. Dilation algorithms were developed to generate inscribed spheres on the nodes and paths of the medial axis to represent pore-bodies and pore-throats of the network, respectively. The end result is a physically representative pore network structure, i.e. three-dimensional spatial distribution (i.e. x-, y-, and z-coordinates) of pore-bodies and pore-throats, pore-body size distribution, pore-throat size distribution, and the connectivity. Systems analyzed in this study include different glass bead systems and natural marine sand. The media ranged in size from 0.123 to 1.0 mm, while the image volumes ranged between 7.7 and 108.9 mm3. In addition to extracting the pore network structure, the porosity, specific surface area, and representative elementary volume analysis on the porosity were calculated. Spatial correlation between pore-body sizes in the network was investigated using semivariograms and integral scale concepts. The impact of resolution on the calculated property was also investigated.
In this work, we show that microtomography is an effective tool to non-destructively extract the structure of many systems. The quality of the datasets depends on photon energy, photon flux, size of the sample, type of the sample, and size of the sample ‘features’. Results show that the developed method of extracting pore network structure is applicable to ideal and natural porous media systems. The impact of resolution on the quantification of the network structure properties varies in its significance based on feature size of the system and the properties being calculated. Therefore, a thorough resolution sensitivity analysis should be carried out to determine the degree of error associated with a system imaged at a given resolution. 相似文献
4.
复杂孔隙储层往往同时发育孔缝洞等多种孔隙类型,这种孔隙结构的复杂性使得岩石的速度与孔隙度之间的相关性很差.经典的二维岩石物理模版只研究弹性参数与孔隙度和饱和度之间的定量关系,而不考虑孔隙结构的影响,用这样的模版来预测复杂孔隙储层的物性参数时带来很大偏差.本文首先证明多重孔隙岩石的干骨架弹性参数可以用一个等效孔隙纵横比的单重孔隙岩石物理模型来模拟;进而基于等效介质岩石物理理论和Gassmann方程,建立一个全新的三维岩石物理模版,用它来建立复杂孔隙岩石的弹性性质与孔隙扁度及孔隙度和饱和度之间的定量关系;在此基础上,预测复杂储层的孔隙扁度、孔隙度以及孔隙中所包含的流体饱和度.实际测井和地震反演数据试验表明,三维岩石物理模版可有效提高复杂孔隙储层参数的预测精度. 相似文献
5.
《Advances in water resources》2005,28(8):835-844
Permeability of porous media in subsurface environments is subject to potentially large uncertainties due to the heterogeneity of natural systems. In this study, a first-order reliability method (FORM) is combined with a lattice Boltzmann method (LBM) to estimate the permeability of randomly generated porous media. The proposed procedure provides an increased ease of addressing complex pore structures by employing LBM to model fluid flow, while inheriting the computational efficiency from FORM. Macroscale-equivalent permeability can thus be estimated with significantly reduced computational efforts, while maintaining a connection to the complex microscale fluid dynamics within a pore structure environment. Implemented on several randomly generated porous media domains, the proposed method provides 13–120 times the efficiency compared to Monte Carlo methods. 相似文献
6.
《Advances in water resources》2007,30(6-7):1648-1667
A new simulator is developed for the prediction of the rate and pattern of growth of biofilms in granular porous media. The biofilm is considered as a heterogeneous porous material that exhibits a hierarchy of length scales. An effective-medium model is used to calculate the local hydraulic permeability and diffusion coefficient in the biofilm, as functions of the local geometric and physicochemical properties. The Navier–Stokes equations and the Brinkman equation are solved numerically to determine the velocity and pressure fields within the pore space and the biofilm, respectively. Biofilm fragments become detached if they are exposed to shear stress higher than a critical value. The detached fragments re-enter into the fluid stream and move within the pore space until they exit from the system or become reattached to downstream grain or biofilm surfaces. A Lagrangian-type simulation is used to determine the trajectories of detached fragments. The spatiotemporal distributions of a carbon source, an electron acceptor and a cell-to-cell signaling molecule are determined from the numerical solution of the governing convection–diffusion–reaction equations. The simulator incorporates growth and apoptosis kinetics for the bacterial cells and production and lysis kinetics for the EPS. The specific growth rate of active bacterial cells depends on the local concentrations of nutrients, mechanical stresses, and a quorum sensing mechanism. Growth-induced deformation of the biofilms is implemented with a cellular automaton approach. In this work, the spatiotemporal evolution of biofilms in the pore space of a 2D granular medium is simulated under high flow rate and nutrient-rich conditions. Transient changes in the pore geometry caused by biofilm growth lead to the formation of preferential flowpaths within the granular porous medium. The decrease of permeability caused by clogging of the porous medium is calculated and is found to be in qualitative agreement with published experimental results. 相似文献
7.
A multiple-point statistics algorithm for 3D pore space reconstruction from 2D images 总被引：1，自引：0，他引：1
Alireza HajizadehAliakbar Safekordi Farhad A. Farhadpour 《Advances in water resources》2011,34(10):1256-1267
Fluid flow behavior in a porous medium is a function of the geometry and topology of its pore space. The construction of a three dimensional pore space model of a porous medium is therefore an important first step in characterizing the medium and predicting its flow properties. A stochastic technique for reconstruction of the 3D pore structure of unstructured random porous media from a 2D thin section training image is presented. The proposed technique relies on successive 2D multiple point statistics simulations coupled to a multi-scale conditioning data extraction procedure. The Single Normal Equation Simulation Algorithm (SNESIM), originally developed as a tool for reproduction of long-range, curvilinear features of geological structures, serves as the simulation engine. Various validating criteria such as marginal distributions of pore and grain, directional variograms, multiple-point connectivity curves, single phase effective permeability and two phase relative permeability calculations are used to analyze the results. The method is tested on a sample of Berea sandstone for which a 3D micro-CT scanning image is available. The results confirm that the equi-probable 3D realizations obtained preserve the typical patterns of the pore space that exist in thin sections, reproduce the long-range connectivities, capture the characteristics of anisotropy in both horizontal and vertical directions and have single and two phase flow characteristics consistent with those of the measured 3D micro-CT image. 相似文献
8.
孔隙纵横比是描述多孔岩石微观孔隙结构特征的重要参数,目前用于获取岩石完整孔隙纵横比分布的经典模型为David-Zimmerman(D-Z)孔隙结构模型,该模型假设岩石由固体矿物基质、一组纵横比相等的硬孔隙以及多组纵横比不等的微裂隙构成,并认为固体矿物基质和硬孔隙均不受压力影响,在此基础上,利用超声纵横波速度的压力依赖性反演岩石硬孔隙和各组微裂隙的孔隙纵横比及孔隙度.该方法的关键点在于以累积裂隙密度为桥梁,借助等效介质理论建立了岩石弹性模量和孔隙纵横比之间的内在联系.但在D-Z模型中,多重孔隙岩石累积裂隙密度的计算直接由单重孔隙裂隙密度公式实现,这种近似导致该模型在许多情况下难以获得良好的反演精度.为了完善经典D-Z模型,本文提出了一种基于虚拟降压的孔隙纵横比分布反演策略,通过多个假想降压过程实现累积裂隙密度的准确计算,并将基于DEM和MT的经典D-Z模型推广到KT和SCA中,结合四种等效介质理论建立了一套完整的反演流程.采用一系列砂岩和碳酸盐岩样品,测试了反演流程在实际岩芯孔隙纵横比提取中的应用效果,研究结果表明:与D-Z模型相比,本文方法的模拟结果与实际数据吻合更好,并同时适用于砂岩和碳酸盐岩;此外,通过分析四种等效介质理论的模拟结果发现,本文方法并不十分依赖于等效介质理论的选择,这些理论获得的孔隙结构参数随压力的变化趋势基本一致,数值上仅存在略微差异,且这种差异随着压力的增大逐渐消失.本文方法是经典D-Z孔隙结构模型的重要补充,对岩石孔隙结构表征、流体饱和岩石速度预测以及孔间喷射流效应的模拟具有十分重要的意义. 相似文献
9.
《Advances in water resources》2007,30(6-7):1392-1407
Field and column studies of biocolloid transport in porous media have yielded a large body of information, used to design treatment systems, protect water supplies and assess the risk of pathogen contamination. However, the inherent “black-box” approach of these larger scales has resulted in generalizations that sometimes prove inaccurate. Over the past 10–15 years, pore scale visualization techniques have improved substantially, allowing the study of biocolloid transport in saturated and unsaturated porous media at a level that provides a very clear understanding of the processes that govern biocolloid movement. For example, it is now understood that the reduction in pathways for biocolloids as a function of their size leads to earlier breakthrough. Interception of biocolloids by the porous media used to be considered independent of fluid flow velocity, but recent work indicates that there is a relationship between them. The existence of almost stagnant pore water regions within a porous medium can lead to storage of biocolloids, but this process is strongly colloid-size dependent, since larger biocolloids are focused along the central streamlines in the flowing fluid. Interfaces, such as the air–water interface, the soil–water interface and the soil–water–air interface, play a major role in attachment and detachment, with significant implications for risk assessment and system design. Important research questions related to the pore-scale factors that control attachment and detachment are key to furthering our understanding of the transport of biocolloids in porous media. 相似文献
10.
Wyllie's time-average equation and subsequent refinements have been used for over 20 years to estimate the porosity of reservoir rocks from compressional (P)-wave velocity (or its reciprocal, transit time) recorded on a sonic log. This model, while simple, needs to be more convincingly explained in theory and improved in practice, particularly by making use of shear (S)-wave velocity. One of the most important, although often ignored, factors affecting elastic velocities in a rock is pore structure, which is also a controlling factor for transport properties of a rock. Now that S-wave information can be obtained from the sonic log, it may be used with P-waves to provide a better understanding of pore structure. A new acoustic velocities-to-porosity transform based on an elastic velocity model developed by Kuster and Toksöz is proposed. Employing an approximation to an equivalent pore aspect ratio spectrum, pore structure for reservoir rocks is taken into account, in addition to total pore volume. Equidimensional pores are approximated by spheres and rounded spheroids, while grain boundary pores and flat pores are approximated by low aspect ratio cracks. An equivalent pore aspect ratio spectrum is characterized by a power function which is determined by compressional-and shear-wave velocities, as well as by matrix and inclusion properties. As a result of this more sophisticated elastic model of porous rocks and a stricter theory of elastic wave propagation, the new method leads to a more satisfactory interpretation and fuller use of seismic and sonic log data. Calculations using the new transform on data for sedimentary rocks, obtained from published literature and laboratory measurements, are presented and compared at atmospheric pressure with those estimated from the time-average equation. Results demonstrate that, to compensate for additional complexity, the new method provides more detailed information on pore volume and pore structure of reservoir rocks. Examples are presented using a realistic self-consistent averaging scheme to consider interactions between pores, and the possibility of extending the method to complex lithologies and shaly rocks is discussed. 相似文献
11.
This paper reports experimental measurements performed to test the ability of electrical resistivity tomography (ERT) imaging to provide quantitative information about transport parameters in porous media such as the dispersivity α, the mixing front velocity u, and the retardation factor R(f) associated with the sorption or trapping of the tracers in the pore structure. The flow experiments are performed in a homogeneous porous column placed between two vertical set of electrodes. Ionic and dyed tracers are injected from the bottom of the porous media over its full width. Under such condition, the mixing front is homogeneous in the transverse direction and shows an S-shape variation in the flow direction. The transport parameters are inferred from the variation of the concentration curves and are compared with data obtained from video analysis of the dyed tracer front. The variations of the transport parameters obtained from an inversion performed by the Gauss-Newton method applied on smoothness-constrained least-squares are studied in detail. While u and R(f) show a relatively small dependence on the inversion procedure, α is strongly dependent on the choice of the inversion parameters. Comparison with the video observations allows for the optimization of the parameters; these parameters are found to be robust with respect to changes in the flow condition and conductivity contrast. 相似文献
12.
JÜRGEN R. SCHOPPER 《Geophysical Prospecting》1966,14(3):301-341
The knowledge of hydraulic and electric properties of porous media and the relations between them is essential for the quantitative evaluation of electric well logs and the solution of other reservoir engineering problems. The state of the art in this field is not yet satisfying. Theories still show considerable discrepancies with practice due to oversimplified model approaches. Empirical relations are either too coarse, not fully determined, or valid under specific geological and geographical conditions only. This article deals with the development of a general theory of the electric and hydraulic resistance behavior of porous media on the basis of a very general statistical network model. A general solution of the relations between formation factor, permeability, and porosity is presented by means of a rigorous mathematical treatment of two limiting cases of such a network. The solution shows that the product of the formation factor and the permeability can be expressed in the expectation values and the variation coefficients of pore channel cross section and shape factor and by a network factor, that depends on the mesh texture of the network. This network factor is in the range zero to one. It is further shown that the path length increase enters both the electric and the hydraulic tortuosity by its square. 相似文献
13.
Recent advances in multi-phase flow theory have shown that the flow of several phases in a porous medium is highly influenced by the interfaces separating these phases. First modeling studies based on this new theory have been performed on a pore scale, as well as on a volume-averaged macro scale using balance equations and constitutive relations that take the role and presence of interfaces into account. However, neither experimental data nor analytical solutions are available on the macro scale so far, although their knowledge is essential for the verification of the new models. 相似文献
14.
NMR is a unique logging tool that measures porosity, permeability, fluid components and wettability. It also shows different responses from rocks due to different pore-sizes in reservoirs; this gives opportunities to carry out a further study for pore structures and pore sharps in complicated reservoirs. The theoretical mechanism in NMR used for pore structure study currently is based on the Brownstein and Tarr theory (Phys Rev 19:2446–2453, 1979), but it shows that the pore structures are not sensitive to the connectivity of pores. In order to overcome this, we are proposing a theoretical approach called the Sphere–Cylinder Model to conduct NMR relaxation theories. In addition, a procedure for different pores has been discussed for porous media that is saturated by an oil–water phase. Consequently, considerations for the NMR relaxations for the water and oil phase have been taken into account in our model. The Sphere–Cylinder model has been used based on an NMR log in one of the gas fields in southwest China and shows satisfactory results. 相似文献
15.
16.
Carbonate reservoirs have complex pore structures, which not only significantly affect the elastic properties and seismic responses of the reservoirs but also affect the accuracy of the prediction of the physical parameters. The existing rockphysics inversion methods are mainly designed for clastic rocks, and the inversion objects are generally porosity and water saturation. The data used are primarily based on the elastic parameters, and the inversion methods are mainly linear approximations. To date, there has been a lack of a simultaneous pore structure and physical parameter inversion method for carbonate reservoirs. To solve these problems, a new Bayesian nonlinear simultaneous inversion method based on elastic impedance is proposed. This method integrates the differential effective medium model of multiple-porosity rocks, Gassmann equation,Amplitude Versus Offset(AVO) theory, Bayesian theory, and a nonlinear inversion algorithm to achieve the simultaneous quantitative prediction of the pore structure and physical parameters of complex porous reservoirs. The forward modeling indicates that the contribution of the pore structure, i.e., the pore aspect ratio, to the AVO response and elastic impedance is second only to that of porosity and is far greater than that of water saturation. The application to real data shows that the new inversion method for determining the pore structure and physical parameters directly from pre-stack data can accurately predict a reservoir's porosity and water saturation and can evaluate the pore structure of the effective reservoir. 相似文献
17.
Interphase mass transfer in porous media is commonly modeled using Sherwood number expressions that are developed in terms of fluid and porous medium properties averaged over some representative elementary volume (REV). In this work the influence of sub-grid scale properties on interphase mass transfer was investigated using a two-dimensional pore network model. The focus was on assessing the impact of (i) NAPL saturation, (ii) interfacial area (iii) NAPL spatial distribution at the pore scale, (iv) grain size heterogeneity, (v) REV or domain size and (vi) pore scale heterogeneity of the porous media on interphase mass transfer. Variability of both the mass transfer coefficient that explicitly accounts for the interfacial area and the mass transfer coefficient that lumps the interfacial area was examined. It was shown that pore scale NAPL distribution and its orientation relative to the flow direction have significant impact on flow bypassing and the interphase mass transfer coefficient. This results in a complex non-linear relationship between interfacial area and the REV-based interphase mass transfer rate. Hence, explicitly accounting for the interfacial area does not eliminate the uncertainty of the mass transfer coefficient. It was also shown that, even for explicitly defined flow patterns, changing the domain size over which the mass transfer process is defined influences the extent of NAPL bypassing and dilution and, consequently, the interphase mass transfer. It was also demonstrated that the spatial variability of pore scale parameters such as pore throat diameters may result in different rates of interphase mass transfer even for the same pore size distribution index. 相似文献
18.
Upscaling pore-scale processes into macroscopic quantities such as hydrodynamic dispersion is still not a straightforward matter for porous media with complex pore space geometries. Recently it has become possible to obtain very realistic 3D geometries for the pore system of real rocks using either numerical reconstruction or micro-CT measurements. In this work, we present a finite element–finite volume simulation method for modeling single-phase fluid flow and solute transport in experimentally obtained 3D pore geometries. Algebraic multigrid techniques and parallelization allow us to solve the Stokes and advection–diffusion equations on large meshes with several millions of elements. We apply this method in a proof-of-concept study of a digitized Fontainebleau sandstone sample. We use the calculated velocity to simulate pore-scale solute transport and diffusion. From this, we are able to calculate the a priori emergent macroscopic hydrodynamic dispersion coefficient of the porous medium for a given molecular diffusion Dm of the solute species. By performing this calculation at a range of flow rates, we can correctly predict all of the observed flow regimes from diffusion dominated to convection dominated. 相似文献
19.
20.
Uncertainty in applying the linear poroelasticity model to field situations as a result of periodic loading in heterogeneous aquifers 
下载免费PDF全文
下载免费PDF全文 The solid Earth's surface frequently experience changes in total stresses as a result of periodic loading. When the fluid‐saturated porous media deform in response to changes in stress, the induced variations in pore volume affect the pore water pressure. The fluid flow therefore occurs in response to the gradient in the induced excess pore water pressure. This work aims at quantifying the spatial variability in excess pressure head produced by the periodic loading accounting for the variation of log hydraulic conductivity (lnK). It is important for the rational management of groundwater resources. A closed‐form expression is developed by the nonstationary spectral approach to analyse the influence of the statistical properties of lnK process, the hydraulic parameters, and the spatial position. The general stochastic framework outlined in this work provides a basis for assessing the impact of statistical properties of input aquifer parameters on the output variability (or uncertainty). Copyright © 2014 John Wiley & Sons, Ltd. 相似文献