首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Diabase dyke swarms are widespread in the East Tianshan and Beishan regions. LA-ICP-MS zircon U-Pb ages of these diabase vary from 305 Ma to 278 Ma, showing that these dykes were formed during Late Carboniferous-Early Permian magmatism. All diabase samples are subalkali calc-alkali, characterized by slight LREE and LILEs enrichment, and weak negative Ti, Nb and Ta anomalies. The diabase samples have positive εNd(t) values (>+3), high Sr isotopic compositions (initial 87Sr/86Sr values=0.7030-0.7097), and large variation of Pb isotopic compositions, indicating they were derived from a deplete mantle source. Regional geology and geochemistry evidences indicate that these diabase dyke swarms were generated in a lithosphere extensional setting and had the same magma sources. Initial magmas may be a mixture of depleted asthenosphere mantle and enriched lithospheric mantle during rapid magma ascending.  相似文献   

2.
Chemical and isotopic compositions have been measured for N2-He-rich bubbling gases discharging from hot springs in the Hainan Island, Southern China. Observed 3He/4He ratios (0.1–1.3 RA) indicate the occurrence of a mantle component throughout the island, which has been highly diluted by a crustal radiogenic 4He component. The occurrence of mantle-derived helium is high in the northern island (12%–16% of total He) and gradually decreases towards southern coast (1%–3% of total He). Such a distribution pattern is most likely controlled by the Pleocene-Quaternary volcanic activities in the northern island and groundwater circulation along the deep major faults. The 40Ar/36Ar and N2/Ar ratios suggest that N2 and Ar of the hot spring gases are mostly meteoric. Although δ13C values of CO2 (–20‰ to –27‰) with low concentrations are consistent with the biogenic origin, the combination of 3He/4He and d13CCO2 suggests a two end-member mixing of mantle and crustal components with CO2/3He ratios of 2×109 and 8×1011, respectively. However, the low CO2/3He ratios (1–22×106) can not be ascribed in terms of the simple mixing but has to be explained by the addition of radiogenic 4He and loss of CO2 by calcite precipitation in the hydrothermal system, which is most likely controlled by the degree of gas-water-rock interaction.  相似文献   

3.
The evolution of a Pan‐African (c. 900–550 Ma) suite of composite dikes, with latite margins and rhyolite interiors, from southwest Jordan is discussed. The dikes cut the Neoproterozoic calc‐alkaline granitoids and high‐grade metamorphic rocks (c. 800–600 Ma) of the northern Arabian‐Nubian Shield in Jordan and have been dated by the Rb‐Sr isochron method at 566±7 Ma. The symmetrically distributed latite margins constitute less than one‐quarter of the whole dike thickness. The rhyolite intruded a median fracture within the latite, while the latter was still hot but completely solidified. The dikes are alkaline and bimodal in composition with a gap in SiO2 between 61 and 74 wt%. Both end members display similar chondrite‐normalized rare earth element patterns. The rhyolites display the compositional signature of A‐type granites. The (La/Lu)N values are 6.02 and 4.91 for latites and rhyolites, respectively, and the rhyolites show a pronounced negative Eu anomaly, in contrast to the slight negative Eu anomaly of the latites. The chemical variability (e.g. Zr/Y, Zr/Nb, K/Rb) within and between latites and rhyolites does not support a fractional crystallization relationship between the felsic and mafic members of the dikes. We interpret the magma genesis of the composite dikes as the result of intrusion of mantle‐derived mafic magma into the lower crust in an extensional tectonic regime. The mafic magma underwent extensive fractional crystallization, which supplied the necessary heat for melting of the lower crust. The products of the initial stages of partial melting (5–10%) mixed with the fractionating mafic magma and gave rise to the latite melts. Further partial melting of the lower crust (up to 30%) produced a felsic melt, which upon 50% fractional crystallization (hornblende 15%, biotite 5%, feldspars 60%, and quartz 20%) gave rise to the rhyolitic magma. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

4.
The mechanical properties of calcarenites are known to be significantly affected by water saturation: both stiffness and strength decrease for wetting in the short term and for chemical dissolution in the long term. Both processes mainly affect bonds among grains: immediately after inundation depositional bonds fall in suspension, whereas diagenetic bonds dissolve more slowly. In this paper, the authors started from the micro‐structural analysis of the weathering processes to conceive a strain hardening hydro‐chemo‐mechanical coupled elastoplastic constitutive model. The concept of extended hardening rules is here enriched: weathering functions have been determined by employing a micro to macro simplified upscaling procedure. Chemical damage is incorporated into the formulation by means of a scalar damage function. Its evolution is also described by using a multiscale approach. A new term is added to the strain rate tensor in order to incorporate the dissolution induced chemical deformations developing once the soft rock is turned into a granular material. A calibration procedure for the constitutive parameters is suggested, and the model is validated by using both coupled and uncoupled chemo‐mechanical experimental test results. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

5.
Three synthetic reference glasses were prepared by directly fusing and stirring 3.8 kg of high‐purity oxide powders to provide reference materials for microanalytical work. These glasses have andesitic major compositions and are doped with fifty‐four trace elements in nearly identical abundance (500, 50, 5 µg g?1) using oxide powders or element solutions, and are named ARM‐1, 2 and 3, respectively. We further document that sector‐field (SF) ICP‐MS (Element 2 or Element XR) is capable of sweeping seventy‐seven isotopes (from 7Li to 238U, a total of sixty‐eight elements) in 1 s and, thus, is able to quantify up to sixty‐eight elements by laser sampling. Micro‐ and bulk analyses indicate that the glasses are homogeneous with respect to major and trace elements. This paper provides preliminary data for the ARM glasses using a variety of analytical techniques (EPMA, XRF, ICP‐OES, ICP‐MS, LA‐Q‐ICP‐MS and LA‐SF‐ICP‐MS) performed in ten laboratories. Discrepancies in the data of V, Cr, Ni and Tl exist, mainly caused by analytical limitations. Preliminary reference and information values for fifty‐six elements were calculated with uncertainties [2 relative standard error (RSE)] estimated in the range of 1–20%.  相似文献   

6.
Gneiss domes are commonly cored by quartzofeldspathic rocks that provide little information about the pressure–temperature–fluid history of the domes. Three northern Cordilleran migmatite domes (Thor‐Odin and Valhalla/Passmore, British Columbia, Canada; Okanogan, Washington, USA), however, contain Mg–Al‐rich orthoamphibole‐cordierite gneiss as layers and lenses that record metamorphic conditions and pressure–temperature (P–T) path information not preserved in the host migmatite. These Mg–Al‐rich rocks are therefore a valuable archive of metamorphic conditions during dome evolution, although refractory rocks such as these commonly contain reaction textures that may complicate the calculation of metamorphic conditions. In the Okanogan dome, Mg–Al‐rich layers are part of the Tunk Creek unit, which occurs at the periphery of an underlying migmatite domain. Bulk compositional layers (mm‐ to m‐scale) consist of gedrite‐dominated, hornblende‐dominated and biotite‐bearing layers that contain variable amounts of gedrite, hornblende, anorthite, cordierite, spinel, sapphirine, corundum, kyanite, biotite and/or staurolite. The presence of different compositional layers (some with reaction textures, some without) allows systematic analysis of metamorphic history by a combined petrographic and phase equilibrium analysis. Gedrite‐dominated layers containing relict kyanite preserve evidence of the highest‐P conditions; symplectitic and coronal reaction textures around kyanite indicate decompression at high temperature. Gedrite‐dominated layers lacking these reaction textures contain layers of sapphirine and spinel in apparent textural equilibrium and record a later high‐T–low‐P part of the path. Phase equilibria (pseudosection) analysis for layers that lack reaction textures indicates metamorphic conditions of 720–750 °C at a range of pressures (>8 to <4 kbar) following decompression. Elevated crustal temperatures and concordant structural fabrics in the Tunk Creek unit and underlying migmatite domain suggest that the calculated P–T conditions recorded in Tunk Creek rocks were coeval with anatexis, extension, and dome formation in Palaeocene–Eocene time. In contrast to orthoamphibole‐cordierite gneiss in the other Cordilleran domes, the Tunk Creek unit occurs as a discontinuous km‐scale layer rather than as smaller (m‐scale) pods, is more calcic, and lacks garnet. In addition, kyanite did not transform to sillimanite, and spinel commonly occurs as a blocky matrix phase in addition to vermicules in symplectite. These differences, along with the compositional layering, allow an analysis of bulk composition v. tectonic (P–T path) controls on mineral assemblages and textures. Pseudosection modelling of different layers in the Tunk Creek unit provides a basis for understanding the metamorphic history of these texturally complex, refractory rocks and their host gneiss domes, and other such rocks in similar tectonic settings.  相似文献   

7.
The Nuri Cu‐W‐Mo deposit is located in the southern subzone of the Cenozoic Gangdese Cu‐Mo metallogenic belt. The intrusive rocks exposed in the Nuri ore district consist of quartz diorite, granodiorite, monzogranite, granite porphyry, quartz diorite porphyrite and granodiorite porphyry, all of which intrude in the Cretaceous strata of the Bima Group. Owing to the intense metasomatism and hydrothermal alteration, carbonate rocks of the Bima Group form stratiform skarn and hornfels. The mineralization at the Nuri deposit is dominated by skarn, quartz vein and porphyry type. Ore minerals are chalcopyrite, pyrite, molybdenite, scheelite, bornite and tetrahedrite, etc. The oxidized orebodies contain malachite and covellite on the surface. The mineralization of the Nuri deposit is divided into skarn stage, retrograde stage, oxide stage, quartz‐polymetallic sulfide stage and quartz‐carbonate stage. Detailed petrographic observation on the fluid inclusions in garnet, scheelite and quartz from the different stages shows that there are four types of primary fluid inclusions: two‐phase aqueous inclusions, daughter mineral‐bearing multiphase inclusions, CO2‐rich inclusions and single‐phase inclusions. The homogenization temperature of the fluid inclusions are 280°C–386°C (skarn stage), 200°C–340°C (oxide stage), 140°C–375°C (quartz‐polymetallic sulfide stage) and 160°C–280°C (quartz‐carbonate stage), showing a temperature decreasing trend from the skarn stage to the quartz‐carbonate stage. The salinity of the corresponding stages are 2.9%–49.7 wt% (NaCl) equiv., 2.1%–7.2 wt% (NaCl) equiv., 2.6%–55.8 wt% (NaCl) equiv. and 1.2%–15.3 wt% (NaCl) equiv., respectively. The analyses of CO2‐rich inclusions suggest that the ore‐forming pressures are 22.1 M Pa–50.4 M Pa, corresponding to the depth of 0.9 km–2.2 km. The Laser Raman spectrum of the inclusions shows the fluid compositions are dominated in H2O, with some CO2 and very little CH4, N2, etc. δD values of garnet are between ?114.4‰ and ?108.7‰ and δ18OH2O between 5.9‰ and 6.7‰; δD of scheelite range from ?103.2‰ to ?101.29‰ and δ18OH2O values between 2.17‰ and 4.09‰; δD of quartz between ?110.2‰ and ?92.5‰ and δ18OH2O between ?3.5‰ and 4.3‰. The results indicate that the fluid came from a deep magmatic hydrothermal system, and the proportion of meteoric water increased during the migration of original fluid. The δ34S values of sulfides, concentrated in a rage between ?0.32‰ to 2.5‰, show that the sulfur has a homogeneous source with characteristics of magmatic sulfur. The characters of fluid inclusions, combined with hydrogen‐oxygen and sulfur isotopes data, show that the ore‐forming fluids of the Nuri deposit formed by a relatively high temperature, high salinity fluid originated from magma, which mixed with low temperature, low salinity meteoric water during the evolution. The fluid flow through wall carbonate rocks resulted in the formation of layered skarn and generated CO2 or other gases. During the reaction, the ore‐forming fluid boiled and produced fractures when the pressure exceeded the overburden pressure. Themeteoric water mixed with the ore‐forming fluid along the fractures. The boiling changed the pressure and temperature, oxygen fugacity, physical and chemical conditions of the whole mineralization system. The escape of CO2 from the fluid by boiling resulted in scheelite precipitation. The fluid mixing and boiling reduced the solubility of metal sulfides and led the precipitation of chalcopyrite, molybdenite, pyrite and other sulfide.  相似文献   

8.
The sedimentology and stratigraphy of a multi‐phase glaciation sequence dating to Marine Isotope Stage 6 in the Rakaia Valley, South Island, New Zealand, is presented. This outcrop presents an example of the depositional signature of an end member of temperate valley glaciation, where voluminous sediment supply in a tectonically active setting combines with high annual temperatures and low seasonality to generate significant year‐round glacifluvial activity. Such glacial systems produce geological–climatic units that are dominated by thick sequences of aggradational gravels and proglacial lake sediments trapped behind outwash heads during deglaciation. At Bayfields Cliff, outwash sequences record an oscillating glacier margin marked by a sequence of glacier‐fed, Gilbert‐type deltas. The deltas are cut by numerous small‐scale, syndepositional, normal faults indicating both loss of glacier support and melt‐out of buried ice. A larger‐scale thrust fault system reflects late‐stage ice overrun. Braid plain gravels and chaotic disturbed glacial lake sediments are also recorded. A notable feature of these systems is the virtual absence of till in an environment with much other evidence for proximal ice. Cumulatively we regard these sediment–landform associations as diagnostic of debris‐laden, perhumid, temperate valley glacier systems. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

9.
The Neoarchaean Jonnagiri greenstone terrane (JGT) is located at the centre of the arcuate Hutti–Jonnagiri–Kadiri–Kolar composite greenstone belt in the eastern Dharwar Craton. High MgO (MgO = ~14 wt.%; Nb = 0.2 ppm), low Nb (LNB) (MgO = 7.8–12 wt.%; Nb = 0.1–5.1 ppm) and high Nb basalts (HNB) (MgO = 5.6–10.1 wt.%; Nb = 9.0–10.6 ppm) metamorphosed to lower amphibolite facies are identified based on their geochemical compositions. These metabasalts exhibit depleted HFSE (Nb–Ta, Zr–Hf), pronounced LREE and LILE enrichments suggesting contribution from subduction‐related components during their genesis. Th and U enrichment over Nb–Ta indicates influx of fluids dehydrated from subducted oceanic lithosphere. The high MgO basalts with higher Mg# (51) than that of the associated LNB and HNB (Mg# = 34–47) represent early fractionated melts of subduction‐modified mantle peridotite. The LNB were produced by partial melting of mantle wedge metasomatized by slab‐dehydrated fluids, whereas the HNB represents melts of subducted oceanic crust and hybridized mantle wedge. Lower Dy/Yb and variable La/Yb ratios suggest their generation at shallower depth within spinel peridotite stability field. The low Ce–Yb trend of these metabasalts reflects intraoceanic type subduction which straddles the fields of arc and back‐arc basin basalts, resembling the Mariana‐type arc basalts. The Jonnagiri metabasalts were derived in a paired arc‐back‐arc setting marked by nascent back‐arc rift system that developed in the proximity of an intraoceanic arc. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

10.
The Bulqiza ultramafic massif, which is part of the eastern Mirdita ophiolite of northern Albania, is world renowned for its high-Cr chromitite deposits. High-Cr chromitites hosted in the mantle section are the crystallized products of boninitic melts in a supra-subduction zone (SSZ). However, economically important high-Al chromitites are also present in massive dunite of the mantle-crust transition zone (MTZ). Chromian-spinel in the high-Al chromitites and dunites of the MTZ have much lower Cr# values (100Cr/(Cr+Al)) (47.7–55.1 and 46.5–51.7, respectively) than those in the high-Cr chromitites (78.2–80.4), harzburgites (72.6–77.9) and mantle dunites (79.4–84.3). The chemical differences in these two types of chromitites are reflected in the behaviors of their platinum-group elements (PGE). The high-Cr chromitites are rich in IPGE relative to PPGE with 0.10–0.45 PPGE/IPGE ratios, whereas the high-Al chromitites have relatively higher PPGE/IPGE ratios between 1.20 and 7.80. The calculated melts in equilibrium with the high-Cr chromitites are boninitic-like, and those associated with the high-Al chromitites are MORB-like but with hydrous, oxidized and TiO2-poor features. We propose that the coexistence of both types of chromitites in the Bulqiza ultramafic massif may indicates a change in magma composition from MORB-like to boninitic-like in a proto-forearc setting during subduction initiation.  相似文献   

11.
Here we report uranium and thorium isotopic ratios and elemental concentrations measured in solid reference materials from the USGS (BHVO‐2G, BCR‐2G, NKT‐1G), as well as those from the MPI‐DING series (T1‐G, ATHO‐G). Specifically created for microanalysis, these naturally‐sourced glasses were fused from rock powders. They cover a range of compositions, elemental concentrations and expected isotopic ratios. The U‐Th isotopic ratios of two powdered source materials (BCR‐2, BHVO‐2) were also characterised. These new measurements via multi‐collector thermal ionisation mass spectrometry and multi‐collector inductively coupled plasma‐mass spectrometry can now be used to assess the relative performance of techniques and facilitate comparison of U‐Th data amongst laboratories in the geoscience community for in situ and bulk analyses.  相似文献   

12.
Sandstone bodies in the Sunnyside Delta Interval of the Eocene Green River Formation, Uinta Basin, previously considered as point bars formed in meandering rivers and other types of fluvial bars, are herein interpreted as delta mouth‐bar deposits. The sandstone bodies have been examined in a 2300 m long cliff section along the Argyle and Nine Mile Canyons at the southern margin of the Uinta lake basin. The sandstone bodies occur in three stratigraphic intervals, separated by lacustrine mudstone and limestone. Together these stratigraphic intervals form a regressive‐transgressive sequence. Individual sandstone bodies are texturally sharp‐based towards mudstone substratum. In proximal parts, the mouth‐bar deposits only contain sandstone, whereas in frontal and lateral positions mudstone drapes separate mouth‐bar clinothems. The clinothems pass gradually into greenish‐grey lacustrine mudstone at their toes. Horizontally bedded or laminated lacustrine mudstone onlaps the convex‐upward sandstone bars. The mouth‐bar deposits are connected to terminal distributary channel deposits. Together, these mouth‐bar/channel sandstone bodies accumulated from unidirectional jet flow during three stages of delta advance, separated by lacustrine flooding intervals. Key criteria to distinguish the mouth‐bar deposits from fluvial point bar deposits are: (i) geometry; (ii) bounding contacts; (iii) internal structure; (iv) palaeocurrent orientations; and (v) the genetic association of the deposits with lacustrine mudstone and limestone.  相似文献   

13.
The 26 November 2005 Jiujiang-Ruichang, Jiangxi, Ms?5.7 earthquake occurred in a seismotectonic setting of moderate earthquake. The northwest-trending Xiangfan-Guangji fault (XFG) does not enter into the epicenter vicinity, but the northeast-trending Ruichang-Wuning fault (RWF) as a regional fault extends to the epicenter nearby, appearing as the Ruichang basin and its marginal faults. Tilting of the Ruichang Basin (RCB) in the Quaternary was controlled by the RCB southeast-marginal, buried fault (RSMBF). Shallow geophysical survey reveals that the RSMBF caused an offset of the reflection layers. Drill hole columnar section demonstrates that there are about 10–12?m displacement in the lower section of the middle-Pleistocene Series along the RSMBF, but no disruption is found in the upper section of the middle-Pleistocene Series. The RSMBF not only has activity in the Quaternary, but also coincides with the nodal plane I from the focal mechanism of the Jiujiang-Ruichang Ms?5.7 earthquake. This evidence, including aftershock distribution and isoseismic lines, strongly suggests that the RSMBF might be the seismogenic tectonics. The RWF is discontinuous at the surface, and consists of three en echelon Quaternary basins, which are the Ruichang, Fanzhen and Wuning basins. Three moderate earthquakes, the Fanzhen ML?4.9 earthquake, the Yejiapu ML?4.1 earthquake and the Jiujiang-Ruichang Ms?5.7 earthquake, have happened in the basins since 1995. The seismogenic tectonics of the Jiujiang-Ruichang Ms?5.7 earthquake is not isolated, but may be controlled by the RWF at depth, the slip of which causes the accumulation of energy for earthquake occurrence.  相似文献   

14.
Evidence for relative sea‐level changes during the middle and late Holocene is examined from two locations on the Atlantic coast of Harris, Outer Hebrides, Scotland, using morphological mapping and survey, stratigraphical, grain size and diatom analysis, and radiocarbon dating. The earliest event identified is a marine flood, which occurred after 7982–8348 cal. a (7370 ± 80 14C a) BP, when the sea crossed a threshold lying at ?0.08 m Ordnance Datum Newlyn (OD) (?2.17 m mean high water springs (MHWS)) before withdrawing. This could have been due to a storm or to the Holocene Storegga Slide tsunami. By 6407–6122 cal. a (5500 ± 60 14C a) BP, relative sea levels had begun to fall from a sandflat surface with an indicated MHWS level of between 0.08 and ?1.96 m (?2.01 to ?4.05 m). This fall reached between ?0.30 and ?2.35 m (?2.39 to ?4.44 m) after 5841–5050 cal. a (4760 ± 130 14C a) BP, but was succeeded by a relative sea‐level rise which reached between 0.54 and ?1.57 m (?1.55 to ?3.66 m) by 5450–4861 cal. a (4500 ± 100 14C a) BP. This rise continued, possibly with an interruption, until a second sandflat surface was reached between 2.34 and ?0.26 m (0.25 to ?2.35 m) between 2952–3375 cal. a (3000 ± 80 14C a) and 1948–2325 cal. a (2130 ± 70 14C a) BP, before present levels were reached. The regressive episode from the earliest sandflat is correlated with the abandonment of the Main Postglacial Shoreline. It is maintained that the fluctuations in relative sea level recorded can be correlated with similar events elsewhere on the periphery of the glacio‐isostatic centre and may therefore reflect secular changes in nearshore sea surface levels. Despite published evidence from trim lines of differential ice sheet loading across the area, no evidence of variations in uplift between the locations concerned could be found. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

15.

The Hilton deposit is a deformed and metamorphosed Proterozoic stratiform Pb‐Zn‐Ag‐Cu deposit hosted by dolomitic and carbonaceous sediments of the Urquhart Shale of the Mt Isa Group. Rocks in the Hilton area show a history of folding and faulting which spans the time range recognized elsewhere in the Western Succession of the Mt Isa Inlier, though the effects of relatively late and brittle deformation are more pronounced in the Hilton area. The Hilton area shows intense faulting relative to similar rocks to the south in the Mt Isa‐Hilton belt. Faulting in the Hilton area has generally resulted in east‐west shortening and extension in both north‐south and vertical directions. This relatively intense late strain is attributed to the geometry of the Paroo Fault Zone, a major north‐trending zone that bounds the Hilton area to the west, and the Sybella Batholith, which formed a relatively rigid indenter during late deformation in the Hilton area. The structural history of the Hilton area is broadly consistent with ongoing east‐west shortening during progressive uplift from mainly ductile to more brittle conditions. Based on these observations, thinning of the Mt Isa Group which was previously attributed to synsedimentary faulting, can now be shown to be related to heterogeneous strain during late faulting. Sulphide layers show a history of folding which is similar to that of the surrounding rocks. Pyrite which is paragenetically associated with mineralization is overprinted by a bedding‐parallel foliation which predates all other structures in the area. This suggests that stratiform sulphide mineralization in the Hilton area predates deformation. Deformation has affected the Hilton orebodies at all scales. Changes in thickness and ‘fault windows’ in the orebody interval occur on the scale of the entire deposit. Mesoscopic ore thickness changes are often clearly related to extensional and contractional structures within sulphide layers. These macroscopic and mesoscopic ore‐thickness variations are spatially associated with cross‐cutting brittle faults, suggesting that strain incompatibility between brittle host rocks and more ductile ore layers played a major role in the present geometry and thickness of sulphide ores at Hilton.  相似文献   

16.
Various combinations of diamond, moissanite, zircon, quartz, corundum, rutile, titanite, almandine garnet, kyanite, and andalusite have been recovered from the Dangqiong peridotites. More than 80 grains of diamond have been recovered, most of which are pale yellow to reddish-orange to colorless. The grains are all 100-200 μm in size and mostly anhedral, but with a range of morphologies including elongated, octahedral and subhedral varieties. Their identification was confirmed by a characteristic shift in the Raman spectra between 1325 cm~(-1) and 1333 cm~(-1), mostly at 1331.51 cm~(-1) or 1326.96 cm~(-1). Integration of the mineralogical, petrological and geochemical data for the Dongqiong peridotites suggests a multi-stage formation for this body and similar ophiolites in the Yarlung-Zangbo suture zone. Chromian spinel grains and perhaps small bodies of chromitite crystallized at various depths in the upper mantle, and encapsulated the UHP, highly reduced and crustal minerals. Some oceanic crustal slabs containing the chromian spinel and their inclusion were later trapped in suprasubduction zones(SSZ), where they were modified by island arc tholeiitic and boninitic magmas, thus changing the chromian spinel compositions and depositing chromitite ores in melt channels.  相似文献   

17.
The Jiangla'angzong granite in the northern part of the Central Lhasa Terrane is composed of syenogranite and adamellite. LA-ICP-MS zircon U-Pb analyses suggest that syenogranite has a weighted mean ~(206) Pb/~(238) U age of 86±1 Ma(mean square weighted deviation=0.37), which is in accordance with the muscovite Ar-Ar age(85±1 Ma) of Cu-Au ore-bearing skarns and the zircon U-Pb age(84±1 Ma) of adamellite. This suggests that the Jiangla'angzong magmatism and Cu–Au mineralization events took place during the Late Cretaceous. The granite contains hornblende, biotite, and pyroxene, and does not contain Al-bearing minerals, such as muscovite, cordierite, and garnet. It has high contents of SiO_2(65.10–70.91 wt%), K_2O(3.44–5.17 wt%), and total K_2O+Na_2O(7.13–8.15 wt%), and moderate contents of A_(12)O_3(14.14–16.45 wt%) and CaO(2.33–4.11 wt%), with a Reitman index(σ43) of 2.18 to 2.33, and A/CNK values of 0.88 to 1.02. The P_2O_5 contents show a negative correlation with SiO_2, whereas Pb contents show a positive correlation with SiO_2. Th and Y contents are relatively low and show a negative correlation with the Rb contents. These characteristics suggest that the Jiangla'angzong granite is a high K calc–alkaline metaluminous I–type granite. It is enriched in light rare earth elements(LREE) and large ion lithofile elements(LILE), and depleted in heavy rare earth elements(HREE) and high field strength elements(HFSE), with LREE/HREE ratios of 11.7 to 18.1. The granite has negative Eu anomalies of 0.58 to 0.94 without obvious Ce anomalies(δCe=1.00–1.04). The relatively low initial 87 Sr/86 Sr ratios of 0.7106 to 0.7179, positive εHf(t) values of 1.0 to 4.1, and two-stage Hf model ages(TDM2) ranging from 889 Ma to 1082 Ma, These geochemical features indicate that the granite derived from a juvenile crust. The(~(143) Nd/~(144) Nd)_t values from the Jiangla'angzong granite range from 0.5121 to 0.5123, its εNd(t) values range from-10.17 to-6.10, its(~(206) Pb/~(204) Pb)_t values range from 18.683 to 18.746, its(~(207) Pb/~(204) Pb)_t values range from 15.695 to 15.700, and its(~(208) Pb/~(204) Pb)_t values range from 39.012 to 39.071. These data indicate that the granite was formed by melting of the upper crust with the addition of some mantle materials. We propose that the Jiangla'angzong granite was formed during the postcollision extension of the Qiangtang and Lhasa terranes.  相似文献   

18.
Lithofacies analysis is fundamental to unravelling the succession of depositional environments associated with sea‐level fluctuations. These successions and their timing are often poorly understood. This report defines lithofacies encountered within the north‐eastern North Carolina and south‐eastern Virginia Quaternary section, interprets their depositional environments, presents a model for coastal depositional sequence development in a passive margin setting and uses this understanding to develop the stratigraphy and Quaternary evolutionary history of the region. Data were obtained from numerous drill cores and outcrops. Chronology was based on age estimates acquired using optically stimulated luminescence, amino acid racemization, Uranium series and radiocarbon dating techniques. Geomorphic patterns were identified and interpreted using light detection and ranging imagery. Since lithofacies occurrence, distribution and stratigraphic patterns are different on interfluves than in palaeo‐valleys, this study focused on interfluves to obtain a record of highstand sea‐level cycles with minimal alteration by fluvial processes during subsequent lowstands. Nine primary lithofacies and four diagenetic facies were identified in outcrops and cores. The uppermost depositional sequence on interfluves exhibits an upward succession from shelly marine lithofacies to tidal estuarine lithofacies and is bounded below by a marine ravinement surface and above by the modern land surface. Older depositional sequences in the subsurface are typically bounded above and below by marine ravinement surfaces. Portions of seven depositional sequences were recognized and interpreted to represent deposition from late middle Pleistocene to present. Erosional processes associated with each successive depositional sequence removed portions of older depositional sequences. The stratigraphic record of the most recent sea‐level highstands (Marine Isotope Stage 5a and Marine Isotope Stage 3) is best preserved. Glacio‐isostatic adjustment has influenced depositional patterns so that deposits associated with late Quaternary sea‐level highstands (Marine Isotope Stages 5c, 5a and 3), which did not reach as high as present sea‐level according to equatorial eustatic records, are uplifted and emergent within the study area.  相似文献   

19.
The Popolasca–Francardo area of northern Corsica contains an assemblage of continental tectonic units affected by an Alpine deformation. In one of these units, Unit II, previously regarded as weakly metamorphosed, a metamorphic mineral assemblage characterized by sodic amphibole, phengite, quartz, albite and epidote has been found in an aplite dyke that cuts the dominant granitoids. Peak‐metamorphic temperature and pressure conditions of 300–370°C and 0.50–0.80 GPa, respectively, have been determined. This finding indicates that a continuous belt of continental slices, characterized by high‐pressure, low‐temperature metamorphism of Tertiary age, extends from the Tenda Massif in the north to the Corte area in the south, thus placing additional constraints on the tectonic evolution of Alpine Corsica. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

20.
Discordant uranium‐lead isotope measurements are reported for a sample of Nabarlek pitchblende. These are compared with earlier measurements on uranium minerals from the South Alligator River area. New interpretations suggest that regional uranium mineralisation took place either 710 or 815 m.y. ago; the lower of these calculations is based on the assumption of modern episodic lead loss, and the higher assumes lead loss by continuous diffusion.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号