共查询到20条相似文献，搜索用时 31 毫秒
1.
Changcheng Liu Deva Prasad Ghosh Ahmed Mohamed Ahmed Salim Weng Sum Chow 《Geophysical Prospecting》2019,67(1):140-149
Amplitude interpretation for hydrocarbon prediction is an important task in the oil and gas industry. Seismic amplitude is dominated by porosity, the volume of clay, pore-filled fluid type and lithology. A few seismic attributes are proposed to predict the existence of hydrocarbon. This paper proposes a new fluid factor by adding a correct item based on the J attribute. The algorithm is verified through stochastic Monte Carlo modelling that contains various rock physical properties of sand and shale. Both gas and oil responses are separated by the new fluid factor. Furthermore, an approach based on the neural network model is trained using the deep learning method to predict the new fluid factor. The confusion matrix shows that this model performs well. This model allows the application of the new fluid factor in the seismic data. In this study, the Marmousi II data set is used to examine the performance of the new fluid factor, and the result is good. Most hydrocarbon reservoirs are identified in the shale–sandstone sequences. The combination of deep learning and the new fluid factor provides a more accurate way for hydrocarbon prediction. 相似文献
2.
Seismic amplitudes contain important information that can be related to fluid saturation. The amplitude‐versus‐offset analysis of seismic data based on Gassmann's theory and the approximation of the Zoeppritz equations has played a central role in reservoir characterization. However, this standard technique faces a long‐standing problem: its inability to distinguish between partial gas and “fizz‐water” with little gas saturation. In this paper, we studied seismic dispersion and attenuation in partially saturated poroelastic media by using frequency‐dependent rock physics model, through which the frequency‐dependent amplitude‐versus‐offset response is calculated as a function of porosity and water saturation. We propose a cross‐plotting of two attributes derived from the frequency‐dependent amplitude‐versus‐offset response to differentiate partial gas saturation and “fizz‐water” saturation. One of the attributes is a measure of “low frequency”, or Gassmann, of reflectivity, whereas the other is a measure of the “frequency dependence” of reflectivity. This is in contrast to standard amplitude‐versus‐offset attributes, where there is typically no such separation. A pragmatic frequency‐dependent amplitude‐versus‐offset inversion for rock and fluid properties is also established based on Bayesian theorem. A synthetic study is performed to explore the potential of the method to estimate gas saturation and porosity variations. An advantage of our work is that the method is in principle predictive, opening the way to further testing and calibration with field data. We believe that such work should guide and augment more theoretical studies of frequency‐dependent amplitude‐versus‐offset analysis. 相似文献
3.
基于频率域峰值属性的河道砂体定量预测及应用(英文) 总被引：1，自引：1，他引：0
河道砂体是陆相含油气盆地最重要的储集类型之一,其边界识别和厚度定量预测是储层预测的热点难题。本文在总结现有方法技术的基础上,提出一种利用频率域峰值属性进行河道砂体边界识别和厚度定量预测的新方法。对典型河道薄砂体地震反射进行了正演模拟,构造了一种新的地震属性——峰值频率-振幅比,研究表明:峰值频率属性对地层厚度变化敏感,振幅属性对地层岩性变化敏感,两者比值突出河道砂体的边界,同时,借助峰值频率与薄层厚度间存在的定量关系进行薄砂体厚度计算。实际数据应用表明,地震峰值频率属性可以较好的刻画河道的平面展布特征;峰值频率-振幅比属性可以提高对河道砂体边界的识别能力;利用频率域地震属性进行砂体边界识别及厚度定量预测是可行的。 相似文献
4.
Transverse isotropy with a vertical axis of symmetry is a common form of anisotropy in sedimentary basins, and it has a significant influence on the seismic amplitude variation with offset. Although exact solutions and approximations of the PP-wave reflection coefficient for the transversely isotropic media with vertical axis of symmetry have been explicitly studied, it is difficult to apply these equations to amplitude inversion, because more than three parameters need to be estimated, and such an inverse problem is highly ill-posed. In this paper, we propose a seismic amplitude inversion method for the transversely isotropic media with a vertical axis of symmetry based on a modified approximation of the reflection coefficient. This new approximation consists of only three model parameters: attribute A, the impedance (vertical phase velocity multiplied by bulk density); attribute B, shear modulus proportional to an anellipticity parameter (Thomsen's parameter ε−δ); and attribute C, the approximate horizontal P-wave phase velocity, which can be well estimated by using a Bayesian-framework-based inversion method. Using numerical tests we show that the derived approximation has similar accuracy to the existing linear approximation and much higher accuracy than isotropic approximations, especially at large angles of incidence and for strong anisotropy. The new inversion method is validated by using both synthetic data and field seismic data. We show that the inverted attributes are robust for shale-gas reservoir characterization: the shale formation can be discriminated from surrounding formations by using the crossplot of the attributes A and C, and then the gas-bearing shale can be identified through the combination of the attributes A and B. We then propose a rock-physics-based method and a stepwise-inversion-based method to estimate the P-wave anisotropy parameter (Thomsen's parameter ε). The latter is more suitable when subsurface media are strongly heterogeneous. The stepwise inversion produces a stable and accurate Thomsen's parameter ε, which is proved by using both synthetic and field data. 相似文献
5.
储层物性参数作为描述储层特性、储层建模和流体模式的重要指标,其准确估算可以为储层预测提供有力参考依据,但传统储层物性参数反演方法无法兼顾反演精度及空间连续性。针对上述问题,本文引入地震属性作为深度学习算法输入,针对地震属性之间存在的信息冗余特征,利用随机森林-递归消除法对地震属性进行约简预处理,最终建立一种基于地震属性约简的储层物性参数预测方法。实际数据测试结果表明,地震属性约简的深度学习储层物性参数预测结果具有良好的精度及横向分辨率,证实本文方法的有效性。 相似文献
6.
A. Amendola G. Gabbriellini P. Dell'Aversana A. J. Marini 《Geophysical Prospecting》2017,65(Z1):49-58
Seismic facies analysis is a well‐established technique in the workflow followed by seismic interpreters. Typically, huge volumes of seismic data are scanned to derive maps of interesting features and find particular patterns, correlating them with the subsurface lithology and the lateral changes in the reservoir. In this paper, we show how seismic facies analysis can be accomplished in an effective and complementary way to the usual one. Our idea is to translate the seismic data in the musical domain through a process called sonification, mainly based on a very accurate time–frequency analysis of the original seismic signals. From these sonified seismic data, we extract several original musical attributes for seismic facies analysis, and we show that they can capture and explain underlying stratigraphic and structural features. Moreover, we introduce a complete workflow for seismic facies analysis starting exclusively from musical attributes, based on state‐of‐the‐art machine learning computational techniques applied to the classification of the aforementioned musical attributes. We apply this workflow to two case studies: a sub‐salt two‐dimensional seismic section and a three‐dimensional seismic cube. Seismic facies analysis through musical attributes proves to be very useful in enhancing the interpretation of complicated structural features and in anticipating the presence of hydrocarbon‐bearing layers. 相似文献
7.
Usage of any single attribute would introduce unacceptable uncertainty due to limited reservoir thickness and distribution, and strong lateral variations in lithological traps. In this paper, a wide range of prestack and post-stack seismic attributes is utilized to identify a range of properties of turbidity channel sandstone reservoir in Block L118 of J Oilfield, China. In order to better characterize the turbidity channel and lower the uncertainty, we applied multi-attribute fusion to weight a variety of seismic attributes in terms of their relevance to the identification of turbidity channel reservoir. Turbidity channel boundary is clearly present in the new attribute and the reservoir thickness prediction is improved. Additionally, fluid potential of reservoir was predicted using this fused attribute with a high value anomaly indicating high fluid potential. The multi-attribute fusion is a valid approach for the fine prediction of lithologic reservoirs, reducing the risks typically associated with exploration. 相似文献
8.
An overview of laboratory apparatuses to measure seismic attenuation in reservoir rocks 总被引：1，自引：0，他引：1
Beatriz Quintal Nicola Tisato Erik H. Saenger Claudio Madonna 《Geophysical Prospecting》2014,62(6):1211-1223
Intrinsic wave attenuation at seismic frequencies is strongly dependent on rock permeability, fluid properties, and saturation. However, in order to use attenuation as an attribute to extract information on rock/fluid properties from seismic data, experimental studies on attenuation are necessary for a better understanding of physical mechanisms that are dominant at those frequencies. An appropriate laboratory methodology to measure attenuation at seismic frequencies is the forced oscillation method, but technical challenges kept this technique from being widely used. There is a need for the standardization of devices employing this method, and a comparison of existing setups is a step towards it. Here we summarize the apparatuses based on the forced oscillation method that were built in the last 30 years and were used to measure frequency‐dependent attenuation in fluid‐saturated and/or dry reservoir rocks under small strains (10?8–10?5). We list and discuss important technical aspects to be taken into account when working with these devices or in the course of designing a new one. We also present a summary of the attenuation measurements in reservoir rock samples performed with these apparatuses so far. 相似文献
9.
莺歌海盆地乐东区深层与东方区具有类似的成藏条件,是高温高压领域获取下一个重大勘探突破的最现实区域.但是该区已钻遇的“亮点”型储层物性差,普遍表现为低孔-特低渗特征,而区域基础规律研究表明,区域潜在甜点储层在地震上应该表现为“暗点”型特征.但是,“暗点”型储层在叠后地震资料上无法有效识别,如何准确预测“暗点”型储层是乐东区勘探新突破的重点攻关方向.本文针对“暗点”识别难的问题,提出了基于叠前地震资料的储层预测技术.从岩石物理出发系统性地梳理该区“暗点”型储层的地球物理特征,总结出其具有“叠加无反射、近道弱波峰、远道弱波谷、道集极性反转”的规律,根据该规律建立了Fstack属性重构算法,利用该算法开展甜点储层筛选并进行“暗点”储层预测,结合道集资料、反演结果等地球物理信息,最终确定潜在“暗点”型气层的分布范围.钻井结果证实该技术对乐东区深层潜在“暗点”型储层具有很好的预测效果. 相似文献
10.
因为地震数据的三维空间分布优势,地震属性已经被广泛应用于含油气性预测、储层厚度预测、孔隙度预测等。但也存在地震属性之间信息冗余、属性与储层物性参数关系模糊的问题。针对这两个问题,将模糊粗糙理论和机器学习引入到储层参数预测中来。通过模糊粗糙集理论对地震属性进行约简,去除冗余信息,得到最优化的地震属性组合;将约简后的属性作为机器学习的输入,实现从地震属性到储层物性参数的非线性映射。该方法既保留了地震属性中有效信息,又避免了因输入变量过多而导致的网络模型训练困难。实际数据应用表明,属性约简的机器学习预测结果分辨率更高,并与数据吻合更好。 相似文献
11.
Musa S.D. Manzi Gordon R.J. Cooper Alireza Malehmir Raymond J. Durrheim 《Geophysical Prospecting》2020,68(1):145-163
Seismic detection of faults, dykes, potholes and iron-rich ultramafic pegmatitic bodies is of great importance to the platinum mining industry, as these structures affect safety and efficiency. The application of conventional seismic attributes (such as instantaneous amplitude, phase and frequency) in the hard-rock environment is more challenging than in soft-rock settings because the geology is often complex, reflections disrupted and the seismic energy strongly scattered. We have developed new seismic attributes that sharpen seismic reflections, enabling additional structural information to be extracted from hard-rock seismic data. The symmetry attribute is based on the invariance of an object with respect to transformations such as rotation and reflection; it is independent of the trace reflection amplitude, and hence a better indicator of the lateral continuity of thin and weak reflections. The reflection-continuity detector attribute is based on the Hilbert transform; it enhances the visibility of the peaks and troughs of the seismic traces, and hence the continuity of weak reflections. We demonstrate the effectiveness of these new seismic attributes by applying them to a legacy 3D seismic data set from the Bushveld Complex in South Africa. These seismic attributes show good detection of deep-seated thin (∼1.5 m thick) platinum ore bodies and their associated complex geological structures (faults, dykes, potholes and iron-rich ultramafic pegmatites). They provide a fast, cost-effective and efficient interpretation tool that, when coupled with horizon-based seismic attributes, can reveal structures not seen in conventional interpretations. 相似文献
12.
东非裂谷Albertine地堑是当今世界油气勘探的热点地区之一,具有埋藏浅、演化快、地层新的地质特点。作为主力含油气层段的新生代地层中疏松砂岩异常发育,物性参数差异较大,受控于孔隙度以及孔隙流体的综合影响,含油气储层的地震响应无明显规律,油气预测难度较大。基于能量吸收分析思想的指导,在利用匹配追踪时频分解方法有效提高时频分辨率的前提下,进一步提出瞬时能量异常属性的计算方法。以Albertine地堑的W油田为例,针对含油气储层表现的低频能量增加、高频能量衰减的异常特征,借助瞬时能量异常属性实现了油气预测,预测结果获得了钻井的验证。 相似文献
13.
Although previous seismic monitoring studies have revealed several relationships between seismic responses and changes in reservoir rock properties, the quantitative evaluation of time‐lapse seismic data remains a challenge. In most cases of time‐lapse seismic analysis, fluid and/or pressure changes are detected qualitatively by changes in amplitude strength, traveltime and/or Poisson's ratio. We present the steps for time‐lapse seismic analysis, considering the pressure effect and the saturation scale of fluids. We then demonstrate a deterministic workflow for computing the fluid saturation in a reservoir in order to evaluate time‐lapse seismic data. In this approach, we derive the physical properties of the water‐saturated sandstone reservoir, based on the following inputs: VP, VS, ρ and the shale volume from seismic analysis, the average properties of sand grains, and formation‐water properties. Next, by comparing the in‐situ fluid‐saturated properties with the 100% formation‐water‐saturated reservoir properties, we determine the bulk modulus and density of the in‐situ fluid. Solving three simultaneous equations (relating the saturations of water, oil and gas in terms of the bulk modulus, density and the total saturation), we compute the saturation of each fluid. We use a real time‐lapse seismic data set from an oilfield in the North Sea for a case study. 相似文献
14.
Mehdi Rezvandehy H. Aghababaei S.H. Tabatabaee Raissi 《Journal of Applied Geophysics》2011,73(3):187-195
Three dimensional seismic operation of Gorgan Plain was studied around a well, which is situated in North of Iran following the hitting of a thin overpressure gas layer (thickness of 9.6 m), with the purpose of the accurate modeling of geological structures and determining the approximate gas storages. The geological structures of the reservoir were modeled using the seismic attributes (coherence, instantaneous amplitude and spectral decomposition (FFT)). The obtained results clearly demonstrated the shape and volume of the existing structural traps in the studied area. In order to estimate the thickness of gas layer in the 3D seismic volume and determining the gas storage, the thickness changes based on the seismic amplitudes were used because its thickness was less than the critical resolution thickness for this layer. However, due to its low thickness, the lack of indicator peak in seismic sections and strong faults of area, it was difficult to pursue this layer in the seismic volume and map its exact amplitude. Considering this issue, a new method with integrating of seismic attributes was recommended. First, the instantaneous amplitude attribute of the thin reservoir layer reflector in computed synthetic seismogram were fabricated and then the frequency regarding the highest amount (dominant frequency) was chosen by Fourier Transform. Finally, spectral decomposition (FFT) with the resulting frequency was gained over the cross-section of the layer's instantaneous amplitude attribute in the 3D seismic volume choosing a proper time window. In such a situation, an increase of its thickness was seen as its amplitude increase and the minimum gas storage of this reservoir was calculated using the area of the restricted part of high thickness (over 9.6 m). 相似文献
15.
Zhining Liu Chengyun Song Bin She Xingmiao Yao Guangmin Hu 《Geophysical Prospecting》2019,67(5):1369-1378
Segmentation of geologic features plays a significant role in seismic interpretation. Based on the segmentation results, interpreters can readily recognize the shape and distribution of geologic features in three-dimensional space and conduct further quantitative analysis. Usually, there are mainly two steps for the segmentation of geologic features: the first step is to extract seismic attributes that can highlight the occurrence of geologic features, and the second step is to apply the segmentation algorithm on the seismic attribute volumes. However, the occurrence of geologic features is not always corresponding to the anomaly value on the seismic attribute volumes and vice versa because of several factors, such as noise in the seismic data, the limited resolution of seismic images and the limited effectiveness of the seismic attribute. Therefore, the segmentation results, which are generated solely based on seismic attributes, are not sufficient to give an accurate depiction of geologic features. Aiming at this problem, we introduce the connectivity constraint into the process of segmentation based the assumption that for one single geologic feature all of its components should be connected to each other. Benefiting from this global constraint, the segmentation results can precisely exclude the interference by false negatives on seismic attribute volumes. However, directly introducing the connectivity constraint into segmentation would face the risk that the segmentation results would deteriorate significantly because of false positives with relatively large area when the connectivity constraints are enforced. Therefore, based on the seismic attribute that highlights the boundary of geologic feature, we further propose a post-processing technique, called pruning, to refine the segmentation results. By taking the segmentation of the channel as an example, we demonstrate that the proposed method is able to preserve the connectivity in the process of segmentation and generate better segmentation results on the field data. 相似文献
16.
Filters for migrated offset substacks are designed by partial coherence analysis to predict ‘normal’ amplitude variation with offset (AVO) in an anomaly free area. The same prediction filters generate localized prediction errors when applied in an AVO‐anomalous interval. These prediction errors are quantitatively related to the AVO gradient anomalies in a background that is related to the minimum AVO anomaly detectable from the data. The prediction‐error section is thus used to define a reliability threshold for the identification of AVO anomalies. Coherence analysis also enables quality control of AVO analysis and inversion. For example, predictions that are non‐localized and/or do not show structural conformity may indicate spatial variations in amplitude–offset scaling, seismic wavelet or signal‐to‐noise (S/N) ratio content. Scaling and waveform variations can be identified from inspection of the prediction filters and their frequency responses. S/N ratios can be estimated via multiple coherence analysis. AVO inversion of seismic data is unstable if not constrained. However, the use of a constraint on the estimated parameters has the undesirable effect of introducing biases into the inverted results: an additional bias‐correction step is then needed to retrieve unbiased results. An alternative form of AVO inversion that avoids additional corrections is proposed. This inversion is also fast as it inverts only AVO anomalies. A spectral coherence matching technique is employed to transform a zero‐offset extrapolation or near‐offset substack into P‐wave impedance. The same technique is applied to the prediction‐error section obtained by means of partial coherence, in order to estimate S‐wave velocity to P‐wave velocity (VS/VP) ratios. Both techniques assume that accurate well ties, reliable density measurements and P‐wave and S‐wave velocity logs are available, and that impedance contrasts are not too strong. A full Zoeppritz inversion is required when impedance contrasts that are too high are encountered. An added assumption is made for the inversion to the VS/VP ratio, i.e. the Gassmann fluid‐substitution theory is valid within the reservoir area. One synthetic example and one real North Sea in‐line survey illustrate the application of the two coherence methods. 相似文献
17.
Wavelet‐based cepstrum decomposition of seismic data and its application in hydrocarbon detection 
下载免费PDF全文
下载免费PDF全文 Ya‐juan Xue Jun‐xing Cao Ren‐fei Tian Hao‐kun Du Yao Yao 《Geophysical Prospecting》2016,64(6):1441-1453
How to use cepstrum analysis for reservoir characterization and hydrocarbon detection is an initial question of great interest to exploration seismologists. In this paper, wavelet‐based cepstrum decomposition is proposed as a valid technology for enhancing geophysical responses in specific frequency bands, in the same way as traditional spectrum decomposition methods do. The calculation of wavelet‐based cepstrum decomposition, which decomposes the original seismic volume into a series of common quefrency volumes, employs a sliding window to move over each seismic trace sample by sample. The key factor in wavelet‐based cepstrum decomposition is the selection of the sliding‐window length as it limits the frequency ranges of the common quefrency section. Comparison of the wavelet‐based cepstrum decomposition with traditional spectrum decomposition methods, such as short‐time Fourier transform and wavelet transform, is conducted to demonstrate the effectiveness of the wavelet‐based cepstrum decomposition and the relation between these two technologies. In hydrocarbon detection, seismic amplitude anomalies are detected using wavelet‐based cepstrum decomposition by utilizing the first and second common quefrency sections. This reduces the burden of needing dozens of seismic volumes to represent the response to different mono‐frequency sections in the interpretation of spectrum decomposition in conventional spectrum decomposition methods. The model test and the application of real data acquired from the Sulige gas field in the Ordos Basin, China, confirm the effectiveness of the seismic amplitude anomaly section using wavelet‐based cepstrum decomposition for discerning the strong amplitude anomalies at a particular quefrency buried in the broadband seismic response. Wavelet‐based cepstrum decomposition provides a new method for measuring the instantaneous cepstrum properties of a reservoir and offers a new field of processing and interpretation of seismic reflection data. 相似文献
18.
Of particular concern in the monitoring of gas injection for the purposes of storage, disposal or improved oil recovery is the exact spatial distribution of the gas volumes in the subsurface. In principle this requirement is addressed by the use of 4D seismic data, although it is recognized that the seismic response still largely provides a qualitative estimate of moved subsurface fluids. Exact quantitative evaluation of fluid distributions and associated saturations remains a challenge to be solved. Here, an attempt has been made to produce mapped quantitative estimates of the gas volume injected into a clastic reservoir. Despite good results using three accurately repeated seismic surveys, time‐delay and amplitude attributes reveal fine‐scale differences though large‐scale agreement in the estimated fluid movement. These differences indicate disparities in the nature of the two attributes themselves, which can be explained by several possible causes. Of most impact are the effects of processing and migration, wave interference effects and noise from non‐repeatability of the seismic surveys. This subject highlights the need for a more careful consideration in 4D acquisition, amplitude processing and use of true amplitude preserving attributes in quantitative interpretation. 相似文献
19.
20.
流体替换即为从一种孔隙流体状态下的岩石物理参数计算出另一种流体状态下的岩石物理参数.流体替换对于地震属性分析具有重要作用,其为解释人员进行AVO(振幅随偏移距变化)及四维地震研究提供了正演模拟及定量分析的工具.通常流体替换都是采用基于wood方程的Gassmann流体替换方法.本文借鉴Patchy saturation模型,及Brie经验模型分别提出了针对流体不均匀分布的Patchy saturation模型流体替换方法,及基于经验关系的Brie经验模型流体替换方法.并基于岩石物理实验比较分析了以上三种流体替换方法.通过目标区岩石物理分析,可以从中优选出更合适的流体替换方法,从而为流体的地震响应分析提供正确的指导. 相似文献