共查询到20条相似文献，搜索用时 343 毫秒
1.
San’kov V. A. Lukhnev A. V. Parfeevets A. V. Miroshnichenko A. I. Ashurkov S. V. 《Doklady Earth Sciences》2011,436(1):159-164
The complex analysis of parameters characterizing the modern deformations of the Earth’s crust and upper mantle in the territory
of the Mongolia-Siberian Area is made. Directions of principal tension axes of stress-tensors, calculated with the use of
earthquake source mechanisms have been taken as parameters of modern deformations at the level of the middle crust; directions
of axes of horizontal strains in the geodesic network by the GPS data have been taken as such parameters at the level of the
Earth’s surface. The strain parameters for the mantle depths are the data on seismic anisotropy derived from the published
sources about the results of studies on splitting of transversal waves from distant earthquakes. Seismic anisotropy is interpreted
as the ordered orientation of olivine crystals, which appears with great strains resulting from the flow of the mantle material.
It has been shown that directions of extensional strain axes (minimal compression) by geodesic and seismological data coincide
with anisotropy directions in the upper mantle in the region whose median value is 310°–320°. The observed mechanical coupling
of the crust and the upper mantle of the Mongolia-Siberian Mobile Area shows the participation of the lithospheric mantle
in the formation of neotectonical structures and enables us to distinguish the principal processes determining the Late Cenozoic
tectogenesis in this territory. One of the leading mechanisms for the neotectonical and modern deformations of the Mongolia-Siberian
Region is the large-scale NW-SE material flow in the upper mantle causing both motion of the entire northern part of the continent
and divergence of the Eurasia and the Amurian Plate. Lithospheric deformations in the western part of the region are related
to collision-induced compression, while those in the central part are caused by interaction of these large-scale tectonic
processes. 相似文献
2.
Tectonics,stress state,and geodynamics of the Mesozoic and Cenozoic Rift basins in the Baikal region
The results of geological, structural, tectonic, and geoelectric studies of the dry basins in the Baikal Rift Zone and western
Transbaikalia, combined under the term Baikal region, are integrated. Deformations of the Cenozoic sediments related to pulsing
and creeping tectonic processes are classified. The efficiency of mapping of the fault-block structure of the territories
overlapped by loose and poorly cemented sediments is shown. The faults mapped at the ground surface within the basins are
correlated with the deep structure of the sedimentary fill and the surface of the crystalline basement, where they are expressed
in warping and zones of low electric resistance. It is established that the kinematics of the faults actively developing in
the Late Cenozoic testifies to the relatively stable regional stress field during the Late Pliocene and Quaternary over the
entire Baikal region, where the NW-SE-trending extension was predominant. At the local level, the stress field of the uppermost
Earth’s crust is mosaic and controlled by variable orientation of the principal stress axes with the prevalence of extension.
The integrated tectonophysical model of the Mesozoic and Cenozoic rift basin is primarily characterized by the occurrence
of mountain thresholds, asymmetric morphostructure, and block-fault structure of the sedimentary beds and upper part of the
crystalline basement. The geological evolution of the Baikal region from the Jurassic to Recent is determined by alternation
of long (20–115 Ma) epochs of extension and relatively short (5.3–3.0 Ma) stages of compression. The basins of the Baikal
Rift System and western Transbaikalia are derivatives of the same geodynamic processes. 相似文献
3.
A comprehensive investigation aimed at determining seismotectonic types of destruction and the stress–strain state of the Earth’s crust in the main seismogenerating structures of the Arctic–Asian seismic belt is conducted for the territory of the northeastern sector of the Russian Arctic region. Based on the degree of activity of geodynamical processes, the regional principles for ranking neotectonic structures are elaborated, and neotectonic zoning is carried out based on the substantiated differentiation of the corresponding classes. Within the limits of the Laptev Sea, Kharaulakh, and Lena-Anabar segments, we analyzed I the structural–tectonic position of the most recent structures, II the deep structure parameters, III the parameters of the active fault system, and IV the parameters of the tectonic stress field, as revealed from tectonophysical analysis of Late Cenozoic fault and fold deformations. Based on the seismological data, the mean seismotectonic deformation tensors are calculated to determine, in combination with geological and geophysical data, the orientations of the principal stress axes and to reveal the structural–tectonic regularity for tectonic regimes of the stress–strain state of the Earth’s crust in the Arctic sector of the boundary between the Eurasian and North American lithospheric plates. 相似文献
4.
The Late Cretaceous–Cenozoic evolution of the North German Basin has been investigated by 3-D thermomechanical finite element modelling. The model solves the equations of motion of an elasto-visco-plastic continuum representing the continental lithosphere. It includes the variations of stress in time and space, the thermal evolution, surface processes and variations in global sea level.The North German Basin became inverted in the Late Cretaceous–Early Cenozoic. The inversion was most intense in the southern part of the basin, i.e. in the Lower Saxony Basin, the Flechtingen High and the Harz. The lower crustal properties vary across the North German Basin. North of the Elbe Line, the lower crust is dense and has high seismic velocity compared to the lower crust south of the Elbe Line. The lower crust with high density and high velocity is assumed to be strong. Lateral variations in lithospheric strength also arise from lateral variations in Moho depth. In areas where the Moho is deep, the upper mantle is warm and the lithosphere is thereby relatively weak.Compression of the lithosphere causes shortening, thickening and surface uplift of relatively weak areas. Tectonic inversion occurs as zones of preexisting weakness are shortened and thickened in compression. Contemporaneously, the margins of the weak zone subside. Cenozoic subsidence of the northern part of the North German Basin is explained as a combination of thermal subsidence and a small amount of deformation and surface uplift during compression of the stronger crust in the north.The modelled deformation patterns and resulting sediment isopachs correlate with observations from the area. This verifies the usefulness and importance of thermomechanical models in the investigation of intraplate sedimentary basin formation. 相似文献
5.
华北克拉通从稳定到破坏的演化过程对有关地球动力学的经典理论提出了挑战,研究其独特的演化历史是固体地球科学研究的一项重要内容。上地幔矿物晶体的各向异性记录了上地幔发生构造变形的信息,研究上地幔地震波各向异性能够揭示现今和构造历史时期所发生的构造运动。本文总结了近年来作者在华北克拉通地区所进行的高密度、覆盖广泛的地震波横波分裂观测研究结果。横波分裂的快轴方向与绝对板块运动方向的不一致,以及横波分裂参数快速的空间变化特征表明了华北克拉通的SKS横波分裂主要反映上地幔的变形。观测结果表明：鄂尔多斯块体保留了克拉通较弱的各向异性特征,其西端体现了元古代克拉通拼合的变形特征; 中新生代华北克拉通破坏事件以不同的机制主导了华北克拉通中部和东部的上地幔变形,在东部地区北西-南东向的拉张应力作用使得快轴方向平行于拉张方向,而在中部则因受到较厚岩石圈的阻挡使得地幔流动改变了方向,因此造成了北东和北北东向的岩石圈拉张。 相似文献
6.
The Cheb Basin (CHB), located in the western part of the Eger Rift (ER) and the western Bohemian Massif, is characterized
by earthquake swarms, neotectonic crust movements and emanations of CO2 dominated gases of mantle origin. Deep structure of the region can be characterized as junction of three domains of mantle
lithosphere with different olivine fabrics revealed by consistent orientations of seismic anisotropy. The domains represent
mantle components of the major tectonic units (micro-plates): Saxothuringian (ST), Teplá-Barrandian (TB) and Moldanubian (MD),
which were assembled during the Variscan orogeny. The ST-TB boundary, reactivated during the Cenozoic extension, controlled
the position and development of the ER and the CHB. We show that the CHB originated above the rejuvenated mantle suture between
the ST and TB. Though the basin is located within the ST crust domain, which is thrust over the mantle junction, it is the
mantle suture that controls the CHB shape and its development through the allochthonous ST crust. The seismically active Mariánské
Lázně Fault limits the basin against the uplifted block of the Erzgebirge Crystalline Complex. The most subsided parts of
the ER and CHB developed above the centre of the mantle transition, whereas a well expressed morphology developed above its
flanks. Our study documents a long memory of the mantle lithosphere assembly inherited from the Variscan orogeny. It is possible
that other continental regions also contain some of intra-plate basins that originated above healed palaeo-plate mantle boundaries. 相似文献
7.
The Late Cenozoic geodynamics of the Alpine-Himalayan belt comprised the collision between continental-lithosphere plates and blocks and the effect of the Neo-Tethyan active residual asthenosphere, which reached the northern margin of the belt after the ocean had closed. From the late Eocene to the early Pliocene, strong deformation, lateral migrations of flaked plates, metamorphism, and magmatism (they all consolidated the crust) took place in the lithosphere with the participation of mobile asthenospheric components. In the Pliocene–Quaternary, the asthenosphere beneath the consolidated crust partly replaced the dense mantle lithosphere with remaining paleoocean mafic rocks, which subducted into the mantle. Phase transformations and deformations in the subducting metamafic slabs caused mantle earthquakes. The less compact metamafic rocks experienced metamorphic weakening under the effect of the asthenosphere and incorporated into the Earth’s crust. The upper-mantle and lower-crust weakening led to a drastic intensification of uplifting and the formation of mountain ranges. Recent volcanism is also attributed to the activity of the Neo-Tethyan asthenosphere. 相似文献
8.
华北克拉通晚中生代壳-幔拆离作用: 岩石流变学约束 总被引：6，自引：5，他引：1
大陆岩石圈的流变学结构对于岩石圈深部过程(壳/幔过程)有着深刻的影响,直接表现在岩石圈壳-幔结构与浅部构造上.本文注意到华北克拉通晚中生代岩石圈减薄期间地壳的伸展、拆离与减薄在不同地区的宏观、微观构造及地壳岩石流变学等方面的差异表现与区域变化,以及现今和晚中生代时期岩石圈厚度的不均匀性.讨论了以水为主体的地质流体的存在对于岩石圈流变性的影响.综合克拉通东部与西部地壳/地幔厚度变化特点以及下地壳和上地幔含水性特点,阐述了晚中生代时期华北克拉通岩石圈内部壳幔耦合与解耦的规律,提出了华北岩石圈壳-幔拆离作用模型以解释华北克拉通晚中生代岩石圈减薄的基本现象与深部过程.提出区域性伸展作用是岩石圈减薄的主要动力学因素,东部地区在晚中生代伸展作用过程中壳-幔具有典型的解耦性,上部地壳、下部地壳和岩石圈地幔的变形具有显著差异性.而西部区壳幔总体具有耦合性,下地壳与岩石圈地幔共同构成流变学强度很高且难以变形的岩石圈根. 相似文献
9.
Lithospheric structure and dynamic processes of the Tianshan orogenic belt and the Junggar basin 总被引：8，自引：0，他引：8
Located at the center of the Eurasian continent and accommodating as much as 44% of the present crustal shortening between India and Siberia, the Tianshan orogenic belt (TOB) is one of the youngest (<20 Ma) and highest (elevation>7000 m) orogenic belts in the world. It provides a natural laboratory for examining the processes of intracontinental deformation. In recent years, wide angle seismic reflection/refraction profiling and magnetotelluric sounding surveys have been carried out along a geoscience transect which extends northeastward from Xayar at the northern margin of the Tarim basin (TB), through the Tianshan orogenic belt and the Junggar basin (JB), to Burjing at the southern piedmont of the Altay Mountain. We have also obtained the 2D density structure of the crust and upper mantle of this area by using the Bouguer anomaly data of Northwestern Xinjiang. With these surveys, we attempt to image the 2D velocity and the 2D electric structure of the crust and upper mantle beneath the Tianshan orogenic belt and the Junggar basin. In order to obtain the small-scale structure of the crust–mantle transitional zone of the study area, the wavelet transform method is applied to the seismic wide angle reflection/refraction data. Combining our survey results with heat flow and other geological data, we propose a model that interprets the deep processes beneath the Tianshan orogenic belt and the Junggar basin.Located between the Tarim basin and the Junggar basin, the Tianshan orogenic belt is a block with relatively low velocity, low density, and partially high resistivity. It is tectonically a shortening zone under lateral compression. A detachment exists in the upper crust at the northern margin of the Tarim basin. Its lower part of the upper crust intruded into the lower part of the upper and the middle crust of the Tianshan, near the Korla fault; its middle crust intruded into the lower crust of the Tianshan; and its lower crust and lithospheric mantle subducted into the upper mantle of the Tianshan. In these processes, the mass of the lower crust of the Tarim basin was carried down to the upper mantle beneath the Tianshan, forming a 20-km-thick complex crust–mantle transitional zone composed of seven thin layers with a lower than average velocity. The thrusting and folding of the sedimentary cover, the intrusive layer in the upper and middle crust, and the mass added by the subduction of the Tarim basin into the upper mantle of the Tianshan are probably responsible for the crustal thickening of the Tianshan. Due to the important mass deficiency in the crust and the upper mantle of the Tianshan, buoyancy must occur and lead to rapid ascent of the Tianshan.The episodic tectonic uplift of the Tianshan and tectonic subsidence of the Junggar basin are closely related to the evolution of the Paleozoic, Mesozoic, and Cenozoic Tethys. 相似文献
10.
Seismic lamination and anisotropy of the Lower Continental Crust 总被引：2，自引：3，他引：2
Seismic lamination in the lower crust associated with marked anisotropy has been observed at various locations. Three of these locations were investigated by specially designed experiments in the near vertical and in the wide-angle range, that is the Urach and the Black Forrest area, both belonging to the Moldanubian, a collapsed Variscan terrane in southern Germany, and in the Donbas Basin, a rift inside the East European (Ukrainian) craton. In these three cases, a firm relationship between lower crust seismic lamination and anisotropy is found. There are more cases of lower-crustal lamination and anisotropy, e.g. from the Basin and Range province (western US) and from central Tibet, not revealed by seismic wide-angle measurements, but by teleseismic receiver function studies with a P–S conversion at the Moho. Other cases of lamination and anisotropy are from exhumed lower crustal rocks in Calabria (southern Italy), and Val Sesia and Val Strona (Ivrea area, Northern Italy). We demonstrate that rocks in the lower continental crust, apart from differing in composition, differ from the upper mantle both in terms of seismic lamination (observed in the near-vertical range) and in the type of anisotropy. Compared to upper mantle rocks exhibiting mainly orthorhombic symmetry, the symmetry of the rocks constituting the lower crust is either axial or orthorhombic and basically a result of preferred crystallographic orientation of major minerals (biotite, muscovite, hornblende). We argue that the generation of seismic lamination and anisotropy in the lower crust is a consequence of the same tectonic process, that is, ductile deformation in a warm and low-viscosity lower crust. This process takes place preferably in areas of extension. Heterogeneous rock units are formed that are generally felsic in composition, but that contain intercalations of mafic intrusions. The latter have acted as heat sources and provide the necessary seismic impedance contrasts. The observed seismic anisotropy is attributed to lattice preferred orientation (LPO) of major minerals, in particular of mica and hornblende, but also of olivine. A transversely isotropic symmetry system, such as expected for sub-horizontal layering, is found in only half of the field studies. Azimuthal anisotropy is encountered in the rest of the cases. This indicates differences in the horizontal components of tectonic strain, which finally give rise to differences in the evolution of the rock fabric. 相似文献
11.
12.
地壳的拆离作用与华北克拉通破坏:晚中生代伸展构造约束 总被引：19，自引：0，他引：19
伸展条件下的地壳拆离作用是岩石圈减薄的重要浅部构造响应。晚中生代时期的伸展构造(包括拆离断层、变质核杂岩构造和断陷盆地)在华北、华南、东北和东蒙古及贝加尔地区普遍发育,它们切过上部地壳(断陷盆地)、中、上地壳(拆离断层)或中部地壳(变质核杂岩)。地壳拆离作用具有运动学极性(NWW或SEE)、几何学宏观(区域)对称与微观(局部)不对称性、遍布全区但不均匀性,以及形成时间的跨越性(140~60Ma)等特点,并使得地壳和岩石圈发生显著的减薄。本文研究揭示出现今岩石圈厚度变化与晚中生代伸展构造的发育程度和分布之间并没有必然的联系。其变化的基本规律是,除新生代裂陷发育区岩石圈厚度明显较小且厚度有迅速变化外,从华北向贝加尔地区总体的变化趋势是逐渐加厚,也即东亚地区岩石圈具有楔形形态。晚中生代时期的地壳(或地幔)拆离作用伴随着广泛的岩石圈减薄作用,区域岩石圈同时遭受到一定程度的减薄和破坏,华北克拉通在这一时期的破坏仅仅是区域岩石圈减薄在华北的具体体现。 相似文献
13.
青藏高原的隆升由印度-欧亚板块的碰撞而驱动,其生长演化,特别是从内到外的扩展机制仍尚存争议。祁连山地处青藏高原向东北扩展的前缘位置,其地壳结构与各向异性对于理解青藏高原向北扩展的生长机制具有重要意义。祁连山中部是青藏高原东北缘地壳遭受挤压强烈变形的区域,已有的研究已经揭示出地壳内部非耦合不均匀变形的几何行为,揭露其对应机制是亟待探索的前沿科学问题。此前该区域的各向异性研究大多基于面状台网数据,台站间距大,无法反映横跨祁连山地壳各向异性的精细变化。为此,本研究选用一条密集线性地震台阵,使用H-κ-c叠加方法,得到了横过祁连山中部的地壳厚度,泊松比以及地壳各向异性的横向变化。结果显示,在中祁连以及南祁连北部地壳厚度最大,平均泊松比最低,反映了地壳加厚过程中铁镁质下地壳的丢失以及长英质中上地壳的水平缩短。此外,偏长英质成分的泊松比值也不支持地壳流在该区域存在。在祁连山内部,地壳各向异性快波的偏振方向与地壳向外扩展方向一致,而与地幔各向异性快波方向近垂直,揭示了壳幔变形可能是解耦的。而在地壳较薄的南祁连和北祁连南部区域,快波方向与古缝合线的走向一致,说明早古生代的构造格局仍对现今的祁连山缩短隆升产生影响。 相似文献
14.
15.
B. Homuth U. Löbl A. G. Batte K. Link C. M. Kasereka G. Rümpker 《International Journal of Earth Sciences》2016,105(6):1681-1692
Shear-wave splitting measurements from local and teleseismic earthquakes are used to investigate the seismic anisotropy in the upper mantle beneath the Rwenzori region of the East African Rift system. At most stations, shear-wave splitting parameters obtained from individual earthquakes exhibit only minor variations with backazimuth. We therefore employ a joint inversion of SKS waveforms to derive hypothetical one-layer parameters. The corresponding fast polarizations are generally rift parallel and the average delay time is about 1 s. Shear phases from local events within the crust are characterized by an average delay time of 0.04 s. Delay times from local mantle earthquakes are in the range of 0.2 s. This observation suggests that the dominant source region for seismic anisotropy beneath the rift is located within the mantle. We use finite-frequency waveform modeling to test different models of anisotropy within the lithosphere/asthenosphere system of the rift. The results show that the rift-parallel fast polarizations are consistent with horizontal transverse isotropy (HTI anisotropy) caused by rift-parallel magmatic intrusions or lenses located within the lithospheric mantle—as it would be expected during the early stages of continental rifting. Furthermore, the short-scale spatial variations in the fast polarizations observed in the southern part of the study area can be explained by effects due to sedimentary basins of low isotropic velocity in combination with a shift in the orientation of anisotropic fabrics in the upper mantle. A uniform anisotropic layer in relation to large-scale asthenospheric mantle flow is less consistent with the observed splitting parameters. 相似文献
16.
南北构造带北段位于青藏高原东北缘及其向北东方向扩展的区域,其岩石圈变形特征对于探讨青藏高原东北缘变形机制及其扩展范围具有非常关键的意义。地震波各向异性能很好地反映上地幔的变形特征。因此,本文对布设在南北构造带北段的流动地震台站记录的远震波形资料进行S波分裂研究,获得了研究区上地幔各向异性图像以及该区岩石圈地幔的变形特征信息。S波分裂研究结果表明,研究区地震波各向异性来自于上地幔,区内不同构造单元上地幔各向异性方向不尽相同。快波方向分布显示,青藏高原东北缘,鄂尔多斯西缘以及贺兰构造带北段的快波方向主要表现为NW-SE向,与前人在银川地堑和贺兰构造带中、北部得到的NW-SE向的上地幔各向异性方向一致,显示这些地区岩石圈地幔变形一致,该结果表明青藏高原东北缘向北东方向扩展的影响范围已到达贺兰构造带北段。阿拉善地块内部快波方向显示为NE-SW向,与阿拉善地块北部存在的北东向展布的晚古生代岩浆岩方向一致,表明该NE-SW向的快波方向可能代表地是“化石”各向异性,是晚古生代阿拉善地块受到古亚洲洋闭合作用的结果。此外,鄂尔多斯地块内也存在NE-SW向的各向异性方向,与区内中-晚侏罗世存在的NE-SW向逆冲推覆构造方向一致,因此该各向异性方向也代表了“化石”各向异性,是鄂尔多斯地块受到古特提斯构造域的块体碰撞、古太平洋板块北西向俯冲以及西伯利亚板块向南俯冲共同作用的结果。 相似文献
17.
Magdalena Scheck Ulf Bayer Volker Otto Juliette Lamarche Dirk Banka Tim Pharaoh 《Tectonophysics》2002,360(1-4):281-299
The Elbe Fault System (EFS) is a WNW-striking zone extending from the southeastern North Sea to southwestern Poland along the present southern margin of the North German Basin and the northern margin of the Sudetes Mountains. Although details are still under debate, geological and geophysical data reveal that upper crustal deformation along the Elbe Fault System has taken place repeatedly since Late Carboniferous times with changing kinematic activity in response to variation in the stress regime. In Late Carboniferous to early Permian times, the Elbe Fault System was part of a post-Variscan wrench fault system and acted as the southern boundary fault during the formation of the Permian Basins along the Trans-European Suture Zone (sensu [Geol. Mag. 134 (5) (1997) 585]). The Teisseyre–Tornquist Zone (TTZ) most probably provided the northern counterpart in a pull-apart scenario at that time. Further strain localisation took place during late Mesozoic transtension, when local shear within the Elbe Fault System caused subsidence and basin formation along and parallel to the fault system. The most intense deformation took place along the system during late Cretaceous–early Cenozoic time, when the Elbe Fault System responded to regional compression with up to 4 km of uplift and formation of internal flexural highs. Compressional deformation continued during early Cenozoic time and actually may be ongoing. The upper crust of the Elbe Fault System, which itself reacted in a more or less ductile fashion, is underlain by a lower crust characterised by low P-wave velocities, low densities and a weak rheology. Structural, seismic and gravimetric data as well as rheology models support the assumption that a weak, stress-sensitive zone in the lower crust is the reason for the high mobility of the area and repeated strain localisation along the Elbe Fault System. 相似文献
18.
地形地貌与区域地质构造分析揭示,龙门山一带上地壳的汇聚作用表现为松潘－甘孜块体东缘的褶皱拱曲与扬子克拉通西缘的高角度叠瓦状冲断,近地表形成了一个巨大的北东向展布的拱曲冲断构造带。松潘－甘孜块体东缘的拱起预示着可能有来自深部的顶托。人工地震测深得到的地壳P波速度结构剖面也揭示,松潘－甘孜块体东缘上地壳普遍有较大范围的拱起,上地壳底部的低速层也同步抬升,其隆起范围与近地表的拱曲冲断带比较一致,说明很可能存在来自中下地壳的上拱作用。面波层析成像揭示松潘－甘孜块体与扬子克拉通具有截然不同的壳幔结构,扬子克拉通速度较高,且不存在低速夹层; 而松潘－甘孜块体速度偏低,地壳明显增厚,且下地壳及地幔上部存在S波低速层,地幔低速层上涌至壳幔过渡带,甚至侵入四川盆地之下,且上涌的范围与地表拱曲冲断带恰巧吻合,推测地幔盖层与下地壳塑性软弱物质的局部上涌促成了上地壳的拱曲。2008年汶川8.0级地震发生在拱曲冲断带中段,最大同震位移场位于龙门山拱曲冲断带及四川盆地西缘,揭示松潘－甘孜块体东缘的拱曲与扬子克拉通西缘的冲断共同受制于两大块体最新的汇聚作用。认为龙门山拱曲冲断构造带是陆内汇聚与壳幔通道流上涌联合作用的结果。爆破地震测深与地震层析成像不显示陆内俯冲图像,两大地块之间中地壳以下似为一近直立的汇聚带,这一构造格架将物质迁移主要限于垂向上,有利于龙门山保持大地形高差,而四川盆地一侧则因难以形成大的构造负载,前陆凹陷作用不显著。 相似文献
19.
The paper reports results of the analysis of the spatial distribution of modern (younger than 2 Ma) volcanism in the Earth’s
northern hemisphere and relations between this volcanism and the evolution of the North Pangaea modern supercontinent and
with the spatial distribution of hotspots of the Earth’s mantle. Products of modern volcanism occur in the Earth’s northern
hemisphere in Eurasia, North America, Greenland, in the Atlantic Ocean, Arctic, Africa, and the Pacific Ocean. As anywhere
worldwide, volcanism in the northern hemisphere of the Earth occurs as (a) volcanism of mid-oceanic ridges (MOR), (b) subduction-related
volcanism in island arcs and active continental margins (IA and ACM), (c) volcanism in continental collision (CC) zones, and
(d) within-plate (WP) volcanism, which is related to mantle hotspots, continental rifts, and intercontinental belts. These
types of volcanic areas are fairly often neighboring, and then mixed volcanic areas occur with the persistent participation
of WP volcanism. Correspondingly, modern volcanism in the Earth’s northern hemisphere is of both oceanic and continental nature.
The latter is obviously related to the evolution of the North Pangaea modern supercontinent, because it results from the Meso-Cenozoic
evolution of Wegener’s Late Paleozoic Pangaea. North Pangaea in the Cenozoic comprises Eurasia, North and South America, India,
and Africa and has, similar to other supercontinents, large sizes and a predominantly continental crust. The geodynamic setting
and modern volcanism of North Pangaea are controlled by two differently acting processes: the subduction of lithospheric slabs
from the Pacific Ocean, India, and the Arabia, a process leading to the consolidation of North Pangaea, and the spreading
of oceanic plates on the side of the Atlantic Ocean, a process that “wedges” the supercontinent, modifies its morphology (compared
to that of Wegener’s Pangaea), and results in the intervention of the Atlantic geodynamic regime into the Arctic. The long-lasting
(for >200 Ma) preservation of tectonic stability and the supercontinental status of North Pangaea are controlled by subduction
processes along its boundaries according to the predominant global compression environment. The long-lasting and stable subduction
of lithospheric slabs beneath Eurasia and North America not only facilitated active IA + ACM volcanism but also resulted in
the accumulation of cold lithospheric material in the deep mantle of the region. The latter replaced the hot mantle and forced
this material toward the margins of the supercontinent; this material then ascended in the form of mantle plumes (which served
as sources of WP basite magmas), which are diverging branches of global mantle convection, and ascending flows of subordinate
convective systems at the convergent boundaries of plates. Subduction processes (compressional environments) likely suppressed
the activity of mantle plumes, which acted in the northern polar region of the Earth (including the Siberian trap magmatism)
starting at the latest Triassic until nowadays and periodically ascended to the Earth’s surface and gave rise to WP volcanism.
Starting at the breakup time of Wegener’s Pangaea, which began with the opening of the central Atlantic and systematically
propagated toward the Arctic, marine basins were formed in the place of the Arctic Ocean. However, the development of the
oceanic crust (Eurasian basin) took place in the latter as late as the Cenozoic. Before the appearance of the Gakkel Ridge
and, perhaps, also the oceanic portion of the Amerasian basin, this young ocean is thought to have been a typical basin developing
in the central part of supercontinents. Wegener’s Pangaea broke up under the effect of mantle plumes that developed during
their systematic propagation to the north and south of the Central Atlantic toward the North Pole. These mantle plumes were
formed in relation with the development of global and local mantle convection systems, when hot deep mantle material was forced
upward by cold subducted slabs, which descended down to the core-mantle boundary. The plume (WP) magmatism of Eurasia and
North America was associated with surface collision- or subduction-related magmatism and, in the Atlantic and Arctic, also
with surface spreading-related magmatism (tholeiite basalts). 相似文献
20.
《International Geology Review》2012,54(8):661-735
The Longmen Shan region includes, from west to east, the northeastern part of the Tibetan Plateau, the Sichuan Basin, and the eastern part of the eastern Sichuan fold-and-thrust belt. In the northeast, it merges with the Micang Shan, a part of the Qinling Mountains. The Longmen Shan region can be divided into two major tectonic elements: (1) an autochthon/parautochthon, which underlies the easternmost part of the Tibetan Plateau, the Sichuan Basin, and the eastern Sichuan fold-and-thrust belt; and (2) a complex allochthon, which underlies the eastern part of the Tibetan Plateau. The allochthon was emplaced toward the southeast during Late Triassic time, and it and the western part of the autochthon/parautochthon were modified by Cenozoic deformation. The autochthon/parautochthon was formed from the western part of the Yangtze platform and consists of a Proterozoic basement covered by a thin, incomplete succession of Late Proterozoic to Middle Triassic shallow-marine and nonmarine sedimentary rocks interrupted by Permian extension and basic magmatism in the southwest. The platform is bounded by continental margins that formed in Silurian time to the west and in Late Proterozoic time to the north. Within the southwestern part of the platform is the narrow N-trending Kungdian high, a paleogeographic unit that was positive during part of Paleozoic time and whose crest is characterized by nonmarine Upper Triassic rocks unconformably overlying Proterozoic basement. In the western part of the Longmen Shan region, the allochthon is composed mainly of a very thick succession of strongly folded Middle and Upper Triassic Songpan Ganzi flysch. Along the eastern side and at the base of the allochthon, pre-Upper Triassic rocks crop out, forming the only exposures of the western margin of the Yangtze platform. Here, Upper Proterozoic to Ordovician, mainly shallow-marine rocks unconformably overlie Yangtze-type Proterozic basement rocks, but in Silurian time a thick section of fine-grained clastic and carbonate rocks were deposited, marking the initial subsidence of the western Yangtze platform and formation of a continental margin. Similar deep-water rocks were deposited throughout Devonian to Middle Triassic time, when Songpan Ganzi flysch deposition began. Permian conglomerate and basic volcanic rocks in the southeastern part of the allochthon indicate a second period of extension along the continental margin. Evidence suggests that the deep-water region along and west of the Yangtze continental margin was underlain mostly by thin continental crust, but its westernmost part may have contained areas underlain by oceanic crust. In the northern part of the Longmen Shan allochthon, thick Devonian to Upper Triassic shallow-water deposits of the Xue Shan platform are flanked by deep-marine rocks and the platform is interpreted to be a fragment of the Qinling continental margin transported westward during early Mesozoic transpressive tectonism. In the Longmen Shan region, the allochthon, carrying the western part of the Yangtze continental margin and Songpan Ganzi flysch, was emplaced to the southeast above rocks of the Yangtze platform autochthon. The eastern margin of the allochthon in the northern Longmen Shan is unconformably overlapped by both Lower and Middle Jurassic strata that are continuous with rocks of the autochthon. Folded rocks of the allochthon are unconformably overlapped by Lower and Middle Jurassic rocks in rare outcrops in the northern part of the region. They also are extensively intruded by a poorly dated, generally undeformed belt, of plutons whose ages (mostly K/Ar ages) range from Late Triassic to early Cenozoic, but most of the reliable ages are early Mesozoic. All evidence indicates that the major deformation within the allochthon is Late Triassic/Early Jurassic in age (Indosinian). The eastern front of the allochthon trends southwest across the present mountain front, so it lies along the mountain front in the northeast, but is located well to the west of the present mountain front on the south. The Late Triassic deformation is characterized by upright to overturned folded and refolded Triassic flysch, with generally NW-trending axial traces in the western part of the region. Folds and thrust faults curve to the north when traced to the east, so that along the eastern front of the allochthon structures trend northeast, involve pre-Triassic rocks, and parallel the eastern boundary of the allochthon. The curvature of structural trends is interpreted as forming part of a left-lateral transpressive boundary developed during emplacement of the allochthon. Regionally, the Longmen Shan lies along a NE-trending transpressive margin of the Yangtze platform within a broad zone of generally N-S shortening. North of the Longmen Shan region, northward subduction led to collision of the South and North China continental fragments along the Qinling Mountains, but northwest of the Longmen Shan region, subduction led to shortening within the Songpan Ganzi flysch basin, forming a detached fold-and-thrust belt. South of the Longmen Shan region, the flysch basin is bounded by the Shaluli Shan/Chola Shan arc—an originally Sfacing arc that reversed polarity in Late Triassic time, leading to shortening along the southern margin of the Songpan Ganzi flysch belt. Shortening within the flysch belt was oblique to the Yangtze continental margin such that the allochthon in the Longmen Shan region was emplaced within a left-lateral transpressive environment. Possible clockwise rotation of the Yangtze platform (part of the South China continental fragment) also may have contributed to left-lateral transpression with SE-directed shortening. During left-lateral transpression, the Xue Shan platform was displaced southwestward from the Qinling orogen and incorporated into the Longmen Shan allochthon. Westward movement of the platform caused complex refolding in the northern part of the Longmen Shan region. Emplacement of the allochthon flexurally loaded the western part of the Yangtze platform autochthon, forming a Late Triassic foredeep. Foredeep deposition, often involving thick conglomerate units derived from the west, continued from Middle Jurassic into Cretaceous time, although evidence for deformation of this age in the allochthon is generally lacking. Folding in the eastern Sichuan fold-and-thrust belt along the eastern side of the Sichuan Basin can be dated as Late Jurassic or Early Cretaceous in age, but only in areas 100 km east of the westernmost folds. Folding and thrusting was related to convergent activity far to the east along the eastern margin of South China. The westernmost folds trend southwest and merge to the south with folds and locally form refolded folds that involve Upper Cretaceous and lower Cenozoic rocks. The boundary between Cenozoic and late Mesozoic folding on the eastern and southern margins of the Sichuan Basin remains poorly determined. The present mountainous eastern margin of the Tibetan Plateau in the Longmen Shan region is a consequence of Cenozoic deformation. It rises within 100 km from 500–600 m in the Sichuan Basin to peaks in the west reaching 5500 m and 7500 m in the north and south, respectively. West of these high peaks is the eastern part of the Tibetan Plateau, an area of low relief at an elevations of about 4000 m. Cenozoic deformation can be demonstrated in the autochthon of the southern Longmen Shan, where the stratigraphic sequence is without an angular unconformity from Paleozoic to Eocene or Oligocene time. During Cenozoic deformation, the western part of the Yangtze platform (part of the autochthon for Late Triassic deformation) was deformed into a N- to NE-trending foldandthrust belt. In its eastern part the fold-thrust belt is detached near the base of the platform succession and affects rocks within and along the western and southern margin of the Sichuan Basin, but to the west and south the detachment is within Proterozoic basement rocks. The westernmost structures of the fold-thrust belt form a belt of exposed basement massifs. During the middle and later part of the Cenozoic deformation, strike-slip faulting became important; the fold-thrust belt became partly right-lateral transpressive in the central and northeastern Longmen Shan. The southern part of the fold-thrust belt has a more complex evolution. Early Nto NE-trending folds and thrust faults are deformed by NW-trending basementinvolved folds and thrust faults that intersect with the NE-trending right-lateral strike-slip faults. Youngest structures in this southern area are dominated by left-lateral transpression related to movement on the Xianshuihe fault system. The extent of Cenozoic deformation within the area underlain by the early Mesozoic allochthon remains unknown, because of the absence of rocks of the appropriate age to date Cenozoic deformation. Klippen of the allochthon were emplaced above the Cenozoic fold-andthrust belt in the central part of the eastern Longmen Shan, indicating that the allochthon was at least partly reactivated during Cenozoic time. Only in the Min Shan in the northern part of the allochthon is Cenozoic deformation demonstrated along two active zones of E-W shortening and associated left-slip. These structures trend obliquely across early Mesozoic structures and are probably related to shortening transferred from a major zone of active left-slip faulting that trends through the western Qinling Mountains. Active deformation is along the left-slip transpressive NW-trending Xianshuihe fault zone in the south, right-slip transpression along several major NE-trending faults in the central and northeastern Longmen Shan, and E-W shortening with minor left-slip movement along the Min Jiang and Huya fault zones in the north. Our estimates of Cenozoic shortening along the eastern margin of the Tibetan Plateau appear to be inadequate to account for the thick crust and high elevation of the plateau. We suggest here that the thick crust and high elevation is caused by lateral flow of the middle and lower crust eastward from the central part of the plateau and only minor crustal shortening in the upper crust. Upper crustal structure is largely controlled in the Longmen Shan region by older crustal anisotropics; thus shortening and eastward movement of upper crustal material is characterized by irregular deformation localized along older structural boundaries. 相似文献