共查询到20条相似文献，搜索用时 296 毫秒
1.
Rock failure is observed around boreholes often with certain types of failure zones, which are called breakouts. Laboratory‐scale drilling tests in some high‐porosity quartz‐rich sandstone have shown breakouts in the form of narrow localized compacted zones in the minimum horizontal stress direction. They are called fracture‐like breakouts. Such compaction bands may affect hydrocarbon extraction by forming barriers that inhibit fluid flow and may also be a source of sand production. This paper presents the results of numerical simulations of borehole breakouts using 3D discrete element method to investigate the mechanism of the fracture‐like breakouts and to identify the role of far‐field stresses on the breakout dimensions. The numerical tool was first verified against analytical solutions. It was then utilized to investigate the failure mechanism and breakout geometry for drilled cubic rock samples of Castlegate sandstone subjected to different pre‐existing far‐field stresses. Results show that failure occurs in the zones of the highest concentration of tangential stress around the borehole. It is concluded that fracture‐like breakout develops as a result of a nondilatant failure mechanism consisting of localized grain debonding and repacking and grain crushing that lead to the formation of a compaction band in the minimum horizontal stress direction. In addition, it is found that the length of fracture‐like breakouts depends on both the mean stress and stress anisotropy. However, the width of the breakout is not significantly changed by the far‐field stresses. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
2.
A model for the stress‐dependent elastic wave velocity response of fractured rock mass is proposed based on experimental evidence of stress‐dependent fracture normal and shear stiffness. Previously proposed models and previous experimental studies on stress‐dependent fracture stiffness have been reviewed to provide a basis for the new model. Most of the existing stress‐dependent elastic wave velocity models are empirical, with model parameters that do not have clear physical meanings. To propose the new model, the rock mass is assumed to have randomly oriented microscopic fractures. In addition, the characteristic length of microfractures is assumed to be sufficiently short compared to the rock mass dimensions. The macroscopic stress‐dependent elastic wave velocity response is assumed to be attributed to the stress dependency of fracture stiffness. The stress‐dependent fracture normal stiffness is defined as a generalized power law function of effective normal stress, which is a modification of the Goodman's model. On the other hand, the stress dependency of fracture shear stiffness is modeled as a linear function of normal stress based on experimental data. Ultrasonic wave velocity responses of a dry core sample of Berea sandstone were tested at effective stresses ranging from 2 to 55 MPa. Visual observation of thin sections obtained from the Berea sandstone confirms that the assumptions made for microstructure of rock mass model are appropriate. It is shown that the model can describe the stress‐dependent ultrasonic wave velocity responses of dry Berea sandstone with a set of reasonable material parameter values. Published 2013. This article is a U.S. Government work and is in the public domain in the USA. 相似文献
3.
Ausama A. Giwelli Koji Matsuki Kiyotoshi Sakaguchi Akihisa Kizaki 《国际地质力学数值与分析法杂志》2013,37(14):2186-2204
In the direct shear test (DST), an internal moment is distributed within the rock specimen by non‐coaxial shear loads applied to the specimen, which cause non‐uniform distributions of both the traction on the loading planes and the stress and deformation in the specimen. To examine the validity of the DST for a rock fracture and to clarify the effect of specimen height, both the stress and deformation in a fracture in the DST were analyzed for specimens with three different heights using a three‐dimensional finite element method with quadratic joint elements for a fracture model. The constitutive law of the fracture considers the dependence of the non‐linear behavior of closure on shear displacement and that of shear stiffness on normal stress and was implemented in simulation code to give a conceptional fracture with uniform mechanical properties to extract only the effect of non‐uniform traction on the stress and deformation in the fracture. The results showed that both normal and shear stresses are concentrated near the end edges of the fracture, and these stress concentrations decrease with a decrease in the specimen height according to the magnitude of the moment produced by the non‐coaxial shear loads. Furthermore, although closure is greater near the end edges of the fracture, where normal stress is concentrated, this concentration of closure is not so significant within the range of this study because of the non‐linear behavior of closure, that is, closure does not significantly increase with an increase in normal stress at large normal stresses. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
4.
岩石断裂韧度表征其抵抗裂纹起裂和扩展的能力,作为其力学性能的一个重要指标,在岩石力学理论研究与岩体工程应用中有着不可替代的作用。由于岩石结构的复杂性,其破坏形式大多呈现为复合型断裂破坏,研究复合型加载条件下岩石断裂韧度具有重要的意义。为了研究锈岩的断裂力学性能,以便其在建筑工业中得到更为广泛的应用,通过18个中心裂纹圆盘（CSTBD）试件径向受压试验,进行了复合型加载条件下锈岩断裂韧度的试验研究。测得了锈岩在纯I型,纯II型以及复合型加载时的断裂韧度,并将试验结果与基于广义最大周向应力（GMTS）准则的理论值进行了对比分析,结果表明：锈岩的纯I型断裂韧度为1.01 MPa?m0.5,而纯II型断裂韧度为1.51 MPa?m0.5,是纯I型断裂韧度的1.49倍,这与基于GMTS准则的理论值1.34非常接近,而比基于最大周向应力（MTS）准则的理论值0.87大很多。裂纹尖端附近的T应力及断裂过程区裂纹尖端的临界距离rc对岩石类材料的开裂路径以及复合型断裂韧度都有较大的影响。考虑了T应力的广义最大周向应力（GMTS）准则能很好的预测试验结果。 相似文献
5.
岩石拉伸剪切破裂是一类特殊应力状态条件下的破裂形式,属于同时受垂直于破裂面的法向拉应力和平行于破裂面的剪应力作用的复合破裂模式。在研制的DSC-800电液伺服测控岩石拉伸剪切试验仪的基础上,进行了大量花岗闪长岩和砂岩的拉伸剪切试验,开展了配套的破裂断口三维激光扫描、扫描电子显微镜（SEM）、岩石物理力学性质试验、颗粒流离散元（PFC）数值模拟等相关试验,利用分形理论研究了岩石拉剪破裂面特征,研究了岩石拉剪-压剪全区破裂准则、剪切速率对岩石拉剪破裂强度的影响,采用颗粒流离散元研究了岩石拉剪破裂过程。研究结论如下:（1）岩石拉剪破裂面的宏观与微观分形维数即粗糙度随着拉应力的增加而增大;（2）岩石的微观断裂形式是拉伸破坏和剪切破坏的结合。当拉应力较小时,岩石的微观断裂形式主要表现为剪切破坏,并且随着拉应力的增加,岩石的拉伸破坏形式表现得更加明显;（3）岩石在拉伸剪切区的破裂拉应力与剪应力成线性负相关关系,在拉伸剪切应力区的岩石破裂线斜率比压缩剪切区大,岩石在拉伸剪切应力条件下比压缩剪切应力条件下容易破裂;（4）在岩石拉伸剪切条件下,剪切速率与剪切强度成非线性反相关关系,随着剪切速率的增加,岩石拉剪破裂面粗糙度增加;（5）建立了岩石拉伸剪切PFC数值试验模型,模拟了岩石拉伸剪切破裂过程中的力链演化以及剪切速率对拉剪破裂面粗糙度的影响,获得了与实验室试验一致的结果。 相似文献
6.
Modeling 3D thermal fracture propagation by transient cooling using virtual multidimensional internal bonds 
下载免费PDF全文
下载免费PDF全文 Thermal fracturing can play an important role in development of unconventional petroleum and geothermal resources. Thermal fractures can result from the nonlinear deformation of the rock in response to thermal stress related to cold water injection as well as heating. Before the rock reaches the final failure stage, material softening and bulk modulus degradation can cause changes in the thermo‐mechanical properties of the solid. In order to capture this aspect of the rock fracture, a virtual multidimensional internal bond‐based thermo‐mechanical model is derived to track elastic, softening, and the failure stages of the rock in response to the temporal changes of its temperature field. The variations in thermo‐mechanical properties of the rock are derived from a nonlinear constitutive model. To represent the thermo‐mechanical behavior of pre‐existing fractures, the element partition method is employed. Using the model, numerical simulation of 3D thermal fracture propagation in brittle rock is carried out. Results of numerical simulations provide evidence of model verification and illustrate nonlinear thermal response and fracture development in rock under uniform cooling. In addition, fracture coalescence in a cluster of fractures under thermal stress is illustrated, and the process of thermal fracturing from a wellbore is captured. Results underscore the importance of thermal stress in reservoir stimulation and show the effectiveness of the model to predict 3D thermal fracturing. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
7.
This paper investigates the possibility of interpreting progressive shear failure in hard soils and soft rocks as the result of shear propagation of a pre‐existing natural defect. This is done through the application of the principles of fracture mechanics, a slip‐weakening model (SWM) being used to simulate the non‐linear zone at the tips of the discontinuity. A numerical implementation of the SWM in a computation method based on the boundary element technique of the displacement discontinuity method (DDM) is presented. The crack and the non‐linear zone at the advancing tip are represented through a set of elements, where the displacement discontinuity (DD) in the tangential direction is determined on the basis of a friction law. A residual friction angle is assumed on the crack elements. Shear resistance decreases on elements in the non‐linear zone from a peak value at the tip, which is characteristic of intact material, to the residual value. The simulation of a uniaxial compressive test in plane strain conditions is carried out to exemplify the numerical methodology. The results emphasize the role played by the critical DD on the mechanical behaviour of the specimen. A validation of the model is shown through the back analysis of some experimental observations. The results of this back analysis show that a non‐linear fracture mechanics approach seems very promising to simulate experimental results, in particular with regards to the shear band evolution pattern. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
8.
加载速率对裂隙岩体的力学性质及变形破坏均有重要影响。利用二维颗粒流程序PFC2D开展了不同倾角非贯通单裂隙砂岩试件的单轴压缩试验,研究了中等应变率对裂隙砂岩应力-应变曲线特征、裂隙尖端应力状态、特征应力状态、岩体损伤及裂隙扩展等力学响应的影响规律。裂隙岩体应力-应变曲线呈现明显的波动性,定义应力突变指标 对应力突变型波动剧烈程度进行了定量统计分析：随应变率的增加,曲线应力突变波动越剧烈,且峰后明显大于峰前;随裂隙倾角的增大,波动幅度峰前增大,而峰后减小。裂隙尖端破裂应力随应变率增大均有所提高,随裂隙倾角的增大,切向剪应力 总体上呈增加变化,而法向应力 明显减小。尖端破裂时岩样加载应力 、岩样临界扩容应力 及峰值应力 均随应变率增大而增大。裂隙尖端的破裂可立即引起岩体扩容,一般应变率越低,岩体裂隙尖端破裂点 和扩容点 越接近峰值强度 。随着应变率的提高,损伤裂纹及宏观裂隙类型越多,岩体试件损伤破裂程度越强,特别是试件端部效应愈显著。裂隙首先以I型翼裂纹在其尖端起裂,而I型翼裂纹的扩展长度与加载速率与裂隙倾角具有较强的相关性。 相似文献
9.
10.
单轴压缩下花岗岩电磁信号的实验研究 总被引：2，自引：0，他引：2
利用自主研制的电荷感应仪对花岗岩样品在单轴压缩变形破裂过程中产生的电荷感应信号和磁信号进行了实验研究。实验结果表明,在岩石变形破裂达到峰值强度时比在峰值强度前有更强的电荷感应信号产生,电荷感应信号也受岩石应力的变化速率影响,在应力变化速率大时,有较强的电荷感应信号。在有变形破裂时,电荷感应信号就较强,变形破裂较小的面所对应的测点的电荷感应信号就较小,这表明电荷的产生和岩石的破裂有很大的关系。电信号比磁信号多,在岩石变形破裂时不断有电信号产生,且有明显的变化,而磁信号的变化不明显。电信号相比磁信号受外界的干扰小,幅值大,说明用电荷感应的方法监测岩石的变形破裂前兆更有优势。 相似文献
11.
花岗岩样品高温后损伤的试验研究 总被引：9，自引：0，他引：9
对河南省某地产25块花岗岩样品进行高温预热处理,测量了加温前后弹性纵波波速,并对样品进行单轴压缩应力-应变全过程试验。通过以上试验,给出如下结果：温度对岩石损伤变化的作用;温度对岩石裂隙密度和损伤应变能释放率的影响。实验结果验证了花岗岩的塑性应变主要与偏斜应力产生的形状改变比能有关,而与体积改变比能的关系不大。 相似文献
12.
Modelling failure in geomaterials, concrete or other quasi‐brittle materials and proper accounting for size effect, geometry and boundary effects are still pending issues. Regularised failure models are capable of describing size effect on specimens with a specific geometry, but extrapolations to other geometries are rare, mostly because experimental data presenting size effect for different geometries and for the same material are lacking. Three‐point bending fracture tests of geometrically similar notched and unnotched specimens are presented. The experimental results are compared with numerical simulations performed with an integral‐type non‐local model. Comparisons illustrate the shortcomings of this classical formulation, which fails to describe size effect over the investigated range of geometries and sizes. Finally, experimental results are also compared with the universal size effect law. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
13.
This paper presents the results of a series of numerical experiments using the synthetic rock mass (SRM) approach to quantify the behaviour of jointed rock masses. Field data from a massive sulphide rock mass, at the Brunswick mine, were used to develop a discrete fracture network (DFN). The constructed DFN model was subsequently subjected to random sampling whereby 40 cubic samples, of height to width ratio of two, and of varying widths (0.05 to 10 m) were isolated. The discrete fracture samples were linked to 3D bonded particle models to generate representative SRM models for each sample size. This approach simulated the jointed rock mass as an assembly of fractures embedded into the rock matrix. The SRM samples were submitted to uniaxial loading, and the complete stress–strain behaviour of each specimen was recorded. This approach provided a way to determine the complex constitutive behaviour of large‐scale rock mass samples. This is often difficult or not possible to achieve in the laboratory. The numerical experiments suggested that higher post‐peak modulus values were obtained for smaller samples and lower values for larger sample sizes. Furthermore, the observed deviation of the recorded post‐peak modulus values decreased with sample size. The ratio of residual strength of rock mass samples per uniaxial compressive strength intact increases moderately with sample size. Consequently, for the investigated massive sulphide rock mass, the pre‐peak and post‐peak representative elemental volume size was found to be the same (7 × 7 × 14 m). Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
14.
J. C. Gálvez J. M. Benítez M. J. Casati B. S. Tork D. A. Cendón 《国际地质力学数值与分析法杂志》2011,35(11):1257-1277
This paper presents a numerical procedure for bond between indented wires and concrete, and the coupled splitting process of the surrounding concrete. The bond model is an interface, non‐associative, plasticity model. It is coupled with a cohesive fracture model for concrete to take into account the splitting of such concrete. Bond between steel and concrete is fundamental for the transmission of stresses between both materials in precast prestressed concrete. Indented wires are used to improve the bond in these structural elements. The radial component of the prestressing force, increased by Poisson's effect, may split the surrounding concrete, decreasing the wire confinement and diminishing the bonding. The combined action of the bond and the splitting is studied with the proposed model. The results of the numerical model are compared with the results of a series of tests, such as those which showed splitting induced by the bond between wire and concrete. Tests with different steel indentation depths were performed. The numerical procedure accurately reproduces the experimental records and improves knowledge of this complex process. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
15.
A new phenomenological macroscopic constitutive model for the numerical simulation of quasi‐brittle fracture and ductile concrete behavior, under general triaxial stress conditions, is presented. The model is particularly addressed to simulate a wide range of confinement stress states, as also, to capture the strong influence of the mean stress value in the concrete failure mechanisms. The model is based on a two‐surface damage‐plastic formulation. The mechanical behavior in different domains of the stress space is separately described by means of a quasi‐brittle or ductile material response:
16.
单轴压缩下多裂隙类岩石材料强度试验与数值分析 总被引：7，自引：0，他引：7
采用伺服控制单轴加载系统对预制多裂隙水泥砂浆试件进行加载试验,探索裂隙角度和分布密度对多裂隙类岩石材料断裂破坏强度的影响规律。对试验数据整理分析,应用FLAC3D建立应变软化模型,进行数值模拟。试验数据和数值分析结果表明,裂隙分布密度相同时,裂隙倾角对试件断裂破坏强度的影响比较显著,25°附近取得最小值;裂隙角度相同时,裂隙分布密度对试件断裂破坏强度的影响与裂隙倾角有关,角度较小时,影响比较显著,随着角度的增大,影响越来越弱。试验所得结论,对于预测地下工程中多裂隙情况下围岩强度变化规律提供了依据。 相似文献
17.
In this paper, the effects of specimen size and geometry on the apparent mode I fracture toughness (K c) of an Iranian white marble (Neyriz) are studied. A number of fracture tests were conducted on center-cracked circular disk (CCCD) specimens with different radii to investigate the size effects on K c. The experimental results demonstrate that the apparent fracture toughness increases in bigger specimens. In order to explain the experimental results, the modified maximum tangential stress (MMTS) criterion is used, where higher order terms of the Williams’ series expansion are included in the maximum tangential stress criterion. It is shown that the MMTS criterion provides good estimates for the apparent fracture toughness of Neyriz marble, obtained from fracture tests of edge-cracked triangular specimens. It is, therefore, concluded that the proposed criterion is able to account for the size and geometry effects on the fracture resistance of rocks simultaneously. 相似文献
18.
P. P. Oreste 《Geotechnical and Geological Engineering》2009,27(1):53-69
The analysis of dowels (non pre-stressed passive reinforcements) for the stabilization of potentially unstable rock blocks
due to sliding is one of the most interesting problems concerning the static of underground rock chambers. The stabilizing
force produced by dowels is not in fact known a priori and it depends on the dowel–rock interaction. The parameters that influence
the problem are not only the geometrical ones of the dowel, but also the mechanical characteristics of the rock and the orientation
of the displacement vector of the block. A detailed study of the dowel–rock interaction has been carried out in this work.
This analysis is able to lead to the evaluation of the axial and shear forces in the dowel in correspondence to the crossed
discontinuity of the block. The vectorial composition of these two forces constitutes the stabilization force of the dowel.
An extensive parametric analysis then made it possible to determine the great variability of the stabilization force of the
dowel in function of the influential parameters of the problem. The graphics that were obtained can be considered a useful
design instrument as they quickly allow the dimensioning of the dowels to be done to reach the required safety factor for
the rock block. 相似文献
19.
The microstructure of rock was numerically reproduced by a polygonal grain‐based model, and its mechanical behavior was examined by performing the uniaxial compression test and Brazilian tests via the Universal Distinct Element Code. The numerical results of the model demonstrated good agreement with the experimental results obtained with rock specimens in terms of the stress–strain behavior, strength characteristics, and brittle fracture phenomenon. An encouraging result is that the grain‐based model‐Universal Distinct Element Code model can reproduce a low ratio of tensile to compressive strength of 1/20 to 1/10 without the need for an additional process. This finding is ascribed to the fact that the geometrical features of polygons can effectively capture the effects of angularity, finite rotation, and interlocking of grains that exist in reality. A numerical methodology to monitor the evolution of micro‐cracks was developed, which enabled us to examine the progressive process of the failure and distinguish the contribution of tensile cracking to the process from that of shear cracking. From the observations of the micro‐cracking process in reference to the stress–strain relation, crack initiation stress, and crack damage stress, it can be concluded that the failure process of the model closely resembles the microscopic observations of rock. We also carried out a parametric study to examine the relationships between the microscopic properties and the macroscopic behavior of the model. Depending on the micro‐properties, the model exhibited a variety of responses to the external load in terms of the strength and deformation characteristics, the evolution of micro‐cracks, and the post‐peak behavior. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
20.
Mahmoud Behnia Kamran Goshtasbi Mohammad Fatehi Marji Aliakbar Golshani 《Arabian Journal of Geosciences》2014,7(7):2729-2737
In the present study, a boundary element method based on the higher order displacement discontinuity formulation is presented to solve the general problem of hydraulic fracture propagation in layered formations. Displacement collocation technique is employed to model the higher order displacement variation along the crack and the special crack tip element near its ends. The hydraulic fracture propagation and its interaction with the layer interface in non-homogenous rock materials are studied by the proposed semi-analytical (hybridized boundary element-boundary collocation) method. The maximum tangential stress criterion (or σ-criterion) of fracture mechanics considering different elastic constants (Young modulus and Poisson’s ratio) is used to obtain the fracture path. The fracture propagation from stiff to soft and soft to stiff media for cracks having different inclination angles is modeled, and the effects of elastic constants on the hydraulic fracture propagation is studied. The results show that if the hydraulic fracture originates in the stiffer layer, its capability to cross the layer increases and is vice versa for the softer material. The comparison of the results gained from the numerical method with those in the literature show a good performance of the method in the case of propagation of hydraulic fracture in layered formations. 相似文献