首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 21 毫秒
1.
The major structure accommodating orogen-parallel extension in the Eastern Alps is inferred to be the Brenner Fault, which forms the western boundary of the Tauern Window. The estimated amount of extension along this fault varies from a minimum of 10–20 km to a maximum of >70 km. All investigations that have attempted to constrain this amount of extension have calculated the fault plane parallel displacement required to restore the difference in structural level between footwall and hanging wall as constrained by geobarometry. However, these calculations neglected the component of exhumation of the footwall resulting from folding and erosion. Therefore, the total amount of extensional displacement was systematically overestimated. In the present study, we project a tectonic marker surface from the footwall and hanging wall of the Brenner Fault onto a N–S-striking cross section. This marker surface, which is the base of the Patscherkofel unit in the footwall and the base of the Ötztal basement in the hanging wall, is inferred to have occupied the same structural level in the hanging wall and footwall of the Brenner Fault before its activity. Therefore, the difference in height between the marker projected from the footwall and from the hanging wall is a measure of the vertical offset across the Brenner Fault. This construction shows that the vertical offset of the marker horizon on both sides of the Brenner Fault varies strongly and continuously along strike of the Brenner Fault, attaining a maximum value of 15 km at the hinge of the folded footwall (Tauern Dome). The along-strike change of vertical offset is explained by large-scale upright folding of the footwall that did not affect the hanging wall of the Brenner Fault. Therefore, the difference in vertical offset of 10 km between the area of the Brenner Pass and the area immediately south of Innsbruck corresponds to the shortening (upright folding) component of exhumation of the footwall. The remaining 5 km of vertical offset must be attributed to extensional deformation. The Brenner Fault itself is barely folded, its dip varies between 20 and 70°, and it crosscuts the upright folds of the western Tauern Window. Given the offset of 5 km, the dip of the fault constrains the extensional displacement to be between 2 and 14 km. We conclude that the Tauern Window was exhumed primarily by folding and erosion, not by extensional unroofing.  相似文献   

2.
The >200 km long Moonlight Fault Zone (MFZ) in southern New Zealand was an Oligocene basin-bounding normal fault zone that reactivated in the Miocene as a high-angle reverse fault (present dip angle 65°–75°). Regional exhumation in the last c. 5 Ma has resulted in deep exposures of the MFZ that present an opportunity to study the structure and deformation processes that were active in a basin-scale reverse fault at basement depths. Syn-rift sediments are preserved only as thin fault-bound slivers. The hanging wall and footwall of the MFZ are mainly greenschist facies quartzofeldspathic schists that have a steeply-dipping (55°–75°) foliation subparallel to the main fault trace. In more fissile lithologies (e.g. greyschists), hanging-wall deformation occurred by the development of foliation-parallel breccia layers up to a few centimetres thick. Greyschists in the footwall deformed mainly by folding and formation of tabular, foliation-parallel breccias up to 1 m wide. Where the hanging-wall contains more competent lithologies (e.g. greenschist facies metabasite) it is laced with networks of pseudotachylyte that formed parallel to the host rock foliation in a damage zone extending up to 500 m from the main fault trace. The fault core contains an up to 20 m thick sequence of breccias, cataclasites and foliated cataclasites preserving evidence for the progressive development of interconnected networks of (partly authigenic) chlorite and muscovite. Deformation in the fault core occurred by cataclasis of quartz and albite, frictional sliding of chlorite and muscovite grains, and dissolution-precipitation. Combined with published friction and permeability data, our observations suggest that: 1) host rock lithology and anisotropy were the primary controls on the structure of the MFZ at basement depths and 2) high-angle reverse slip was facilitated by the low frictional strength of fault core materials. Restriction of pseudotachylyte networks to the hanging-wall of the MFZ further suggests that the wide, phyllosilicate-rich fault core acted as an efficient hydrological barrier, resulting in a relatively hydrous footwall and fault core but a relatively dry hanging-wall.  相似文献   

3.
The Kutai Basin formed in the middle Eocene as a result of extension linked to the opening of the Makassar Straits and Philippine Sea. Seismic profiles across the northern margin of the Kutai Basin show inverted middle Eocene half-graben oriented NNE–SSW and N–S. Field observations, geophysical data and computer modelling elucidate the evolution of one such inversion fold. NW–SE and NE–SW trending fractures and vein sets in the Cretaceous basement have been reactivated during the Tertiary. Offset of middle Eocene carbonate horizons and rapid syn-tectonic thickening of Upper Oligocene sediments on seismic sections indicate Late Oligocene extension on NW–SE trending en-echelon extensional faults. Early middle Miocene (N7–N8) inversion was concentrated on east-facing half-graben and asymmetric inversion anticlines are found on both northern and southern margins of the basin. Slicken-fibre measurements indicate a shortening direction oriented 290°–310°. NE–SW faults were reactivated with a dominantly dextral transpressional sense of displacement. Faults oriented NW–SE were reactivated with both sinistral and dextral senses of movement, leading to the offset of fold axes above basement faults. The presence of dominantly WNW vergent thrusts indicates likely compression from the ESE. Initial extension during the middle Eocene was accommodated on NNE–SSW, N–S and NE–SW trending faults. Renewed extension on NW–SE trending faults during the late Oligocene occurred under a different kinematic regime, indicating a rotation of the extension direction by between 45° and 90°. Miocene collisions with the margins of northern and eastern Sundaland triggered the punctuated inversion of the basin. Inversion was concentrated in the weak continental crust underlying both the Kutai Basin and various Tertiary basins in Sulawesi whereas the stronger oceanic crust, or attenuated continental crust, underlying the Makassar Straits, acted as a passive conduit for compressional stresses.  相似文献   

4.
根据地层层序特征 ,叠加在东秦岭造山带之上的泌阳凹陷伸展作用可以划分出 6个伸展作用幕。核二段沉积前泌阳凹陷以北东—南西向的伸展作用为主 ,构造变形受以正断层为主兼具左旋走滑分量的唐河—栗园断裂控制。核二段沉积期——廖庄组沉积末期构造应力场发生转变 ,以北西—南东向伸展作用为主 ,构造变形主要受以正断层为主兼具右旋走滑分量的泌阳—栗园断裂控制。断裂活动引起上盘构造变形 ,对先成构造进行改造。廖庄组沉积末期发生区域性的隆升作用 ,北西—南东向的伸展作用导致边界断裂上盘发生断块掀斜 ,地层遭受强烈剥蚀。核二段沉积以来尤其是廖庄组沉积末期 ,受北西—南东向不均匀伸展作用的影响 ,北西向走滑断层活动并影响盖层构造样式  相似文献   

5.
The Northern Snake Range is a classic example of a metamorphic core complex, Basin-and-Range province, United States. It is composed of a plastically deformed footwall and a brittlely deformed hanging wall, separated by the Northern Snake Range low-angle detachment (NSRD). Brittle deformation, however, is not confined to the hanging wall.This paper focuses on exposures in Cove Canyon, located on the SE flank of the Northern Snake Range, where penetrative, homogeneous faults are well exposed throughout the hanging wall, footwall and NSRD, and overprint early plastic deformation. These late-stage fault sets assisted Eocene-Miocene extension. Detailed analysis of the faults reveals the following: (1) The shortening direction defined by faults is similar to the shortening direction defined by the stretching lineation in the footwall mylonites, indicating that the extensional kinematic history remained unchanged as the rocks were uplifted into the elastico-frictional regime. (2) After ∼17 Ma, extension may have continued entirely within elastic-frictional regime via cataclastic flow. (3) This latest deformation phase may have been accommodated by a single, continuous event. (3) Faults within NSRD boudins indicate that deformation within the detachment zone was non-coaxial during the latest phase of extension.  相似文献   

6.
《International Geology Review》2012,54(12):1419-1442
The Palaeogene deposits of the Thrace Basin have evolved over a basement composed of the Rhodope and Sakarya continents, juxtaposed in northwest Turkey. Continental and marine sedimentation began in the early Eocene in the southwest part, in the early-middle Eocene in the central part, and in the late Lutetian in the north-northeast part of the basin. Early Eocene deposition in the southern half of the present Thrace Basin began unconformably over a relict basin consisting of uppermost Cretaceous–Palaeocene pelagic sediments. The initial early-middle Eocene deposition began during the last stage of early Palaeogene transtension and was controlled by the eastern extension (the Central Thrace Strike–Slip Fault Zone) of the Balkan-Thrace dextral fault to the north. Following the northward migration of this faulting, the Thrace Palaeogene Basin evolved towards the north during the late Lutetian. From the late Lutetian to the early Oligocene, transpression caused the formation of finger-shaped, eastward-connected highs and sub-basins. The NW–SE-trending right-lateral strike–slip Strandja Fault Zone began to develop and the Strandja Highland formed as a positive flower structure that controlled the deposition of the middle-upper Eocene alluvial fans in the northern parts of the Thrace Palaeogene Basin. Also, in the southern half of the basin, the upper Eocene–lower Oligocene turbiditic series with debris flows and olistostrome horizons were deposited in sub-basins adjacent to the highs, while shelf deposits were deposited in the northern half and southeast margin of the basin. At least since the early Eocene, a NE-trending magmatic belt formed a barrier along the southeast margin of the basin. From the late Oligocene onwards, the Thrace Palaeogene Basin evolved as an intermontane basin in a compressional tectonic setting.  相似文献   

7.
辽西医巫闾山地区瓦子峪变质核杂岩的厘定   总被引：9，自引：0，他引：9  
以前未被发现的辽西医巫闾山地区瓦子峪变质核杂岩主要由一条向西倾的低角度正断层———瓦子峪拆离断层组成 ,它将由早白垩世沉积岩和火山岩组成的上盘与糜棱岩化和未变形的下盘分开。瓦子峪拆离断层 (以前称之为孙家湾—稍户营子断裂 )位于变质核杂岩的西侧 ,倾角 10～ 4 0°,构造标志指示向北西方向 (约 2 90°)剪切。与早白垩世地壳伸展相伴生的下盘糜棱岩剪切方向也是北西向 ,这与瓦子峪拆离断层运动相关。已经发表的和未发表的锆石U Pb年龄、40 Ar/3 9Ar热年代学和上盘阜新盆地中生物地层的时代研究表明 ,地壳伸展和变质核杂岩形成时代为早白垩世 (约 12 7～ 116Ma)。我们未发现以前文献报道的医巫闾山是一对称的变质核杂岩的任何证据。瓦子峪变质核杂岩以及WNW侧的拆离断层的厘定会加深我们对华北克拉通早白垩世伸展作用的理解和认识 ,下一步的研究重点包括野外构造研究以确定拆离断层和下盘糜棱岩的空间展布 ,进一步采集样品以研究变质核杂岩的地质 /热年代学和变质核杂岩范围内的岩体成因。我们认为瓦子峪变质核杂岩的形成是太平洋板块边界重组、早白垩世岩浆作用致使地壳升温 ,从而导致经造山作用而加厚的地壳垮塌的结果。  相似文献   

8.
Analysis of the Gachsar structural sub-zone has been carried out to constrain structural evolution of the central Alborz range situated in the central Alpine Himalayan orogenic system. The sub-zone bounded by the northward-dipping Kandovan Fault to the north and the southward-dipping Taleghan Fault to the south is transversely cut by several sinistral faults. The Kandovan Fault that controls development of the Eocene rocks in its footwall from the Paleozoic–Mesozoic units in the fault hanging wall is interpreted as an inverted basin-bounding fault. Structural evidences include the presence of a thin-skinned imbricate thrust system propagated from a detachment zone that acts as a footwall shortcut thrust, development of large synclines in the fault footwall as well as back thrusts and pop-up structures on the fault hanging wall. Kinematics of the inverted Kandovan Fault and its accompanying structures constrain the N–S shortening direction proposed for the Alborz range until Late Miocene. The transverse sinistral faults that are in acute angle of 15° to a major magnetic lineament, which represents a basement fault, are interpreted to develop as synthetic Riedel shears on the cover sequences during reactivation of the basement fault. This overprinting of the transverse faults on the earlier inverted extensional fault occurs since the Late Miocene when the south Caspian basin block attained a SSW movement relative to the central Iran. Therefore, recent deformation in the range is a result of the basement transverse-fault reactivation.  相似文献   

9.
滇西新生代兰坪盆地和剑川盆地分别位于哀牢山–红河断裂带两侧,青藏高原东构造结内,其沉积过程和构造变形对青藏高原东南缘的构造演化有重要的启示意义。通过对这两个盆地古近纪沉积和构造过程的研究,我们发现兰坪盆地和剑川盆地及邻区的构造变形分为三期:始新世早期的强烈挤压变形、始新世中晚期的伸展变形、渐新世的走滑变形。始新世早期的挤压变形主要表现为兰坪地区的褶皱–冲断系统、哀牢山-红河断裂的逆冲活动和剑川盆地的宽缓褶皱。沉积方面,古新统勐野井组(E_1m)较为稳定的细粒滨湖相沉积转变为始新统宝相寺组(E_2b)较粗的具有前陆盆地性质的河流相沉积,特别是宝相寺组底部发育的一套快速堆积的磨拉石建造,可能是对始新世强烈挤压环境下的沉积响应。始新世中晚期伸展变形体现在盆地的构造环境由早期的挤压环境变为伸展环境和该时期大量富钾岩体和岩脉的侵入,沉积学上,下始新统宝相寺组的河流相转变为中始新统金丝厂组(E_2j)具有快速堆积磨拉石特征的曲流河沉积,极可能是对构造体制变革的沉积响应。渐新世的走滑变形则体现在渐新统的缺失和哀牢山–红河断裂的早期左行走滑。因此,我们认为剑川–兰坪地区在始新世中期和渐新世均发生了显著的运动学转换,这一认识也得到了始新世中期兰坪和剑川盆地物源明显变化的支持。结合青藏高原东南部始新世中晚期岩浆的活动,渐新世大型剪切带(崇山剪切带、高黎贡剪切带)的强烈走滑和保山块体的旋转,我们推测青藏高原东南缘古近纪的构造演化为古新世-始新世早期的挤压、始新世中晚期的伸展、渐新世的转换压缩。  相似文献   

10.
Mylonitic structures related to two orogenic events are described from the upper and lower contacts of the Combin zone and the immediately overlying upper Austroalpine Dent Blanche nappe/Mont Mary klippe and the directly underlying lower Austroalpine Etirol-Levaz slice. The first event, Late Eocene in age, commenced during blueschist facies P-T conditions, but pre-dated the peak of subsequent greenschist facies overprint. The second event, Early Oligocene in age, took place during retrograde greenschist facies conditions. Most sense of shear indicators associated with the retrograde mylonites indicate top SE shearing, but subordinate top NW displacing shear sense indicators have also been mapped. Mylonitic top SE shearing appears to be restricted to the Combin zone and its upper and lower contacts. Within the Dent Blanche nappe and Mont Mary klippe and at the base of the Etirol-Levaz slice, structures were observed which developed during blueschist/greenschist facies conditions and are, in conjunction with the P-T-t history of these rocks, inferred to be older. Associated kinematic data indicate a top NW shear sense. Comparable blueschist/greenschist facies shear sense indicators have not been observed in the Combin zone. Nonetheless, the foliation in the Combin zone shows a progressive evolution from blueschist facies to greenschist facies to retrograde greenschist facies conditions. This indicates that the Combin zone and the immediately over- and underlying Austroalpine units shared a common tectono-metamorphic evolution since the Late Eocene. Finite strain data reveal oblate strain fabrics, which are thought to result from a true flattening strain geometry. Flow path modelling reveals a general non-coaxial deformation régime and corroborates significant departures from a simple shear deformation. In the study area, mylonitic top SE shearing in the Combin zone is attributed to Early Oligocene backfolding and backthrusting of the Mischabel phase. Temperature-time curves suggest slight reheating in the Monte Rosa nappe underneath and cooling in the Dent Blanche nappe above the Combin zone, hence confirming a thrust interpretation for this event. The top NW displacing structures are thought to result from Late Eocene emplacement of the Dent Blanche nappe and the Combin zone onto the Middle Pennine Barrhorn series along the Combin fault. As related structures initiated during mildly blueschist facies conditions in the Dent Blanche nappe and the underlying Combin zone and both were emplaced together onto the greenschist facial Barrhorn series, it is concluded that the structures developed as the nappes moved upward relative to the earth's surface. Thus the Combin fault is regarded as a thrust. The geometry of this structure indicates that the Combin fault is an out of sequence thrust that locally cut down section. Hence, top NW out of sequence thrusting caused local thinning of the metamorphic/structural section in association with horizontal shortening. Out of sequence thrusts cutting down section, and back-thrusts, offer the possibility of explaining the pronounced break in the grade of metamorphism across the Combin fault, i.e. the contact between the eclogite facial Zermatt-Saas zone and the overlying lower grade Combin zone, by contractional deformation.  相似文献   

11.
盐井?五龙断裂是龙门山中央断裂北川?映秀断裂的南延部分,也是龙门山南段的三大控制性主干断裂之一。为了详细认识盐井?五龙断裂的构造几何学、运动学特征,在野外构造研究的基础上,运用磁组构方法对盐井?五龙断裂105块构造岩定向样品进行深入研究。野外构造解析表明断裂至少发生了韧性挤压剪切、脆?韧性逆冲和脆性挤压碎裂三期构造变形。磁组构研究显示构造岩磁组构样品的平均磁化率k_m值具有强磁化率和弱磁化率两种特征。磁组构形状参数T、磁面理F值、磁线理L值和T-P_J图解显示磁化率椭球体主要为压扁型,磁面理较磁线理发育,局部发育较强磁线理,进一步表明盐井?五龙断裂以挤压、剪切为主,伴有拉伸变形的整体特征,样品的P_J整体较大,显示出构造强变形磁组构特征。最小磁化率主轴Kmin方位表明盐井?五龙断裂北段和南段分别受到了NW-SE向和NEE-SWW向的挤压作用;Kmin方位和倾伏角表明北段晚一期的脆韧性变形主体为自NW向SE的较高角度的挤压逆冲剪切变形,局部伴有极小量的左行走滑特征。断裂南段早期韧性变形整体以自SWW向NEE的挤压逆冲剪切变形为主,上盘(西盘)远离主干断裂表现为左行走滑兼逆冲的运动学特征,下盘变形主要以逆冲剪切变形为主,走滑分量极小,并且自西向东韧性剪切变形具有相对强弱相间的特征。  相似文献   

12.
The Asturian Arc was produced in the Early Permian by a large E–W dextral strike–slip fault (North Iberian Megashear) which affected the Cantabrian and Palentian zones of the northeastern Iberian Massif. These two zones had previously been juxtaposed by an earlier Kasimovian NW–SE sinistral strike–slip fault (Covadonga Fault). The occurrence of multiple successive vertical fault sets in this area favoured its rotation around a vertical axis (mille-feuille effect). Along with other parallel faults, the Covadonga Fault became the western margin of a proto-Tethys marine basin, which was filled with turbidities and shallow coal-basin successions of Kasimovian and Gzhelian ages. The Covadonga Fault also displaced the West Asturian Leonese Zone to the northwest, dragging along part of the Cantabrian Zone (the Picos de Europa Unit) and emplacing a largely pelitic succession (Palentian Zone) in what would become the Asturian Arc core. The Picos de Europa Unit was later thrust over the Palentian Zone during clockwise rotation. In late Gzhelian time, two large E–W dextral strike–slip faults developed along the North Iberian Margin (North Iberian Megashear) and south of the Pyrenean Axial Zone (South Pyrenean Fault). The block south of the North Iberian Megashear and the South Pyrenean Fault was bent into a concave, E-facing shape prior to the Late Permian until both arms of the formerly NW–SE-trending Palaeozoic orogen became oriented E–W (in present-day coordinates). Arc rotation caused detachment in the upper crust of the Cantabrian Zone, and the basement Covadonga Fault was later resurrected along the original fault line as a clonic fault (the Ventaniella Fault) after the Arc was completed. Various oblique extensional NW–SE lineaments opened along the North Iberian Megashear due to dextral fault activity, during which numerous granitic bodies intruded and were later bent during arc formation. Palaeomagnetic data indicate that remagnetization episodes might be associated with thermal fluid circulation during faulting. Finally, it is concluded that the two types of late Palaeozoic–Early Permian orogenic evolution existed in the northeastern tip of the Iberian Massif: the first was a shear-and-thrust-dominated tectonic episode from the Late Devonian to the late Moscovian (Variscan Orogeny); it was followed by a fault-dominated, rotational tectonic episode from the early Kasimovian to the Middle Permian (Alleghenian Orogeny). The Alleghenian deformation was active throughout a broad E–W-directed shear zone between the North Iberian Megashear and the South Pyrenean Fault, which created the basement of the Pyrenean and Alpine belts. The southern European area may then be considered as having been built by dispersal of blocks previously separated by NW–SE sinistral megashears and faults of early Stephanian (Kasimovian) age, later cut by E–W Early Permian megashears, faults, and associated pull-apart basins.  相似文献   

13.
扬子地台西缘江浪变质核杂岩的出露地壳剖面构造地层柱   总被引：14，自引：0，他引：14  
颜丹平  宋鸿林 《现代地质》1997,11(3):290-297
扬子地台西缘江浪变质核杂岩的出露地壳剖面构造地层柱自下而上由３个体系构成，即中元古界李伍岩群堆垛层系统，代表深部构造层次中多期、多体制变形变质改造后的扬子地台基底；古生代褶叠层系统（中间韧性流变层），其中的３个岩组具有不同的褶叠层构造地层型，其时代分别为奥陶纪、早志留世和二叠纪；最上部为浅部构造层次纵弯曲变形的三叠纪西康群板岩带。在各体系之间以及各体系内部，发育了一系列的顺层韧性剪切滑脱带；其中以分割基底堆垛层与下部盖层流变层的区域性韧性剪切滑脱带最具意义，我们称之为基底剥离滑脱带。  相似文献   

14.
The article describes the characteristics of the Yagan metamorphic core complex, especially the associated detachment fault and various extensional structures in its footwall. The age of the complex is discussed in some detail as well. The basic features of the Yagan metamorphic complex (Jurassic in age) are similar to those of the metamorphic core complex (Tertiary in age) in the Cordilleran area; they are as follows: (a) mylonitic gneisses in the footwall, (b) chloritized sheared mylonitic rocks, (c) pseudotachylites and flinty cataclasites or microbreccias, (d) unmetamorphosed or epimetamorphic rocks in the hanging wall with a layer of fault gouges or incohesive fault breccia next to the detachment fault. In contrast to its Cordilleran counterpart, however, there are many extensional faults with different styles (from dactile low-angle normal faults through brittle-ductile to brittle high-angle normal faults)in the footwall.  相似文献   

15.
 An important detachment is described in the allochthonous Ordenes Complex, in the NW Iberian Massif, and its meaning is related to the kinematics of contemporaneous convergent structures. The Corredoiras Detachment (CD) separates a hangingwall unit, characterised by a medium-pressure metamorphic gradient, from a footwall high-pressure and high-temperature unit and an underlying ophiolitic unit. An associated ductile shear zone, nearly 2000 m thick, developed in the lower part of the hangingwall unit, where the Corredoiras Orthogneiss, a Lower Ordovician metagranite, was progressively transformed into augengneisses, mylonitic and ultramylonitic gneisses. The attitude of the stretching and mineral lineation in the mylonites varies due to late refolding at map scale, but the sense of movement can be estimated, being roughly top to the SE. According to crosscutting relationships, the CD developed subsequent to the thrusting of the high-pressure/high-temperature unit onto the ophiolitic unit, and prior to younger extensional detachments, upright folding and strike-slip tectonics. The geometric relationships of the CD with the previous structures in the footwall unit, the subtractive character of the metamorphic gap between its hangingwall and footwall, and the available isotopic data suggest that the CD is an early Variscan, ductile extensional detachment, the movement of which was roughly simultaneous with the onset of thrusting of the allochthonous complexes over their relative autochthon. Received: 17 November 1998 / Accepted: 4 April 1999  相似文献   

16.
Field investigation of the western part of the Mosha Fault in several structural sections in the south central Alborz Range showed that the fault has a high angle of dip to the north, and emplaces Precambrian to Cenozoic rocks over the Eocene Karaj Formation. Study of the kinematics of the Mosha Fault in this area, based on S–C fabric and microstructures, demonstrates that it is a deep-seated semi-ductile thrust. Strain analysis on rock samples from different sections across the Mosha Fault shows a flattening pattern of deformation in which the long axis of the strain ellipsoid is aligned in the fault shear sense. The Mosha Fault is associated with a large hanging-wall anticline, cored by Precambrian rocks, and series of footwall synclines, formed of late Tertiary rocks. This geometry, together with several low angle short-cut thrusts in the fault footwall, implies that the Mosha Fault is an inverted normal fault which has been reactivated since the late Tertiary. In the study area, the reverse fault mechanism was associated with the rapid uplift and igneous activity in the central Alborz Range during the late Tertiary, unlike in the eastern portion of the fault, where the fault kinematics was replaced by a strike-slip mechanism in the Late Miocene.  相似文献   

17.
In orogenic belts, a basal décollement zone often develops at depth to accommodate the shortening due to folding and thrusting of the sedimentary cover. In the Early Mesozoic intracontinental Xuefengshan Belt of South China, such a décollement zone is exposed in the core of anticlines formed by the emplacement of the late-orogenic granitic plutons. Our detailed, multi-scale structural analysis documents a synmetamorphic ductile deformation. In the basal décollement, the Neoproterozoic pelite and sandstone, and the intruding Early Paleozoic granites were deformed and metamorphosed into mylonites and orthogneiss, respectively. The metamorphic foliation contains a NW–SE stretching lineation associated with top-to-the-NW kinematic indicators. The ductile shearing of these high-strained rocks can be correlated with NW-verging folds and thrusts recognized in the Neoproterozoic to Early Triassic sedimentary cover. Monazite U–Th–Pbtot chemical dating, and zircon SIMS U–Pb dating provide age constraints of the ductile shearing between 243 and 226?Ma, and late-orogenic granite emplacement around 235–215?Ma. In agreement with recent geochronological data, these new results show that the Xuefengshan Belt is an Early Mesozoic orogen dominated by the NW-directed shearing and thrusting. At the southeastern boundary of the Xuefengshan Belt, the Chenzhou-Linwu fault separates the Early Mesozoic domain to the NW from the Early Paleozoic domain to the SE. The tectonic architecture of this belt was possibly originated from the continental underthrusting to the SE of the South China block in response to northwest-directed subduction of the Paleo-Pacific plate.  相似文献   

18.
Abstract The article describes the characteristics of the Yagan metamorphic core complex, especially the associated detachment fault and various extensional structures in its footwall. The age of the complex is discussed in some detail as well. The basic features of the Yagan metamorphic complex (Jurassic in age) are similar to those of the metamorphic core complex (Tertiary in age) in the Cordilleran area; they are as follows: (a) mylonitic gneisses in the footwall, (b) chloritized sheared mylonitic rocks, (c) pseudotachylites and flinty cataclasites or microbreccias, (d) unmetamorphosed or epimetamorphic rocks in the hanging wall with a layer of fault gouges or incohesive fault breccia next to the detachment fault. In contrast to its Cordilleran counterpart, however, there are many extensional faults with different styles (from dactile low-angle normal faults through brittle — ductile to brittle high — angle normal faults) in the footwall.  相似文献   

19.
The Simav metamorphic core complex of the northern Menderes massif, western Turkey, consists of a plutonic (Tertiary) and metamorphic (Precambrian) core (footwall) separated from an allochthonous cover sequence (hanging wall) by a low-angle, ductile-to-brittle, extensional fault zone (i.e. detachment fault). The core rocks below the detachment fault are converted into mylonites with a thickness of a few hundred metres. Two main deformation events have affected the core rocks. The first deformational event (D1) was developed within the Precambrian metamorphic rocks. The second event (D2), associated with the Tertiary crustal extension, includes two distinct stages. Stage one is the formation of a variably developed ductile (mylonitic) deformation (D2d) in metamorphic and granitic core rocks under greenschist facies conditions. The majority of the mylonites in the study area have foliations that strike NNW to NNE and dip SW to SE. Stretched quartz and feldspar grains define the mineral lineation trending SW-NE direction and plunging gently to SW. The kinematic indicators indicate a top-to-NE sense of shear. Stage two formation of brittle deformation (D2b) that affected all core and cover rocks. D2b involves the development of cataclasites and high-angle normal faults. An overall top towards the north sense of shear for the ductile (mylonitic) fabrics in the core rocks is consistent with the N-S regional extension in western Turkey.  相似文献   

20.
北京云蒙山地区花岗岩穹隆及伸展构造的探讨   总被引：9，自引：0，他引：9  
张建新  曾令森 《地质论评》1997,43(3):232-240
北京云蒙山花岗岩为一中生代侵入的花岗岩穹隆,花岗岩穹隆的叶理普遍发育,叶理轨迹基本平行于穹隆的外部边界,并显示出从核部到边部逐渐增强,东南侧明显强于西北侧的特点。变形构造研究显示,花岗岩穹隆的边部及围岩中普遍存在不同层次及不同运动方向的伸展构造。东南侧以具河防口－水峪伸展型韧性剪切带为特征,剪切运动标志显示为从ＮＷ－ＳＥ的正剪切运动,有限应变分析估算其剪切位移量在１０ｋｍ以上,剪切带上部被河防口正  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号