共查询到20条相似文献，搜索用时 31 毫秒
1.
To improve the energy efficiency of ships and to predict ship motion response under actual sea conditions, the far-field theory, strip theory, and Fujii and Takahashi’s modified semi-empirical method are based and studied to calculate the wave-induced added resistance. Firstly, a new modified formula based on the Maruo method is presented to calculate the radiation added resistance for the ship with a complex surface. Meanwhile, some calculation details such as the Green function, the shape of the sections (shape below the still water level or shape below the wave level) in the strip theory, and so on are discussed. Finally, the CFD method is used to simulate the motions of the hull and the added resistance, and the results of the CFD method and those of other numerical methods are analyzed and compared with the experiment results. The modified method in the paper can predict the added resistance in waves for the complex-hull-surface ships well and quickly.
相似文献2.
VLCC油船波浪增阻预报方法的实用修正 总被引：1，自引：1，他引：0
近年来随着船舶环保和营运性能要求更高,波浪增阻预报正变得越来越重要。由于存在假设和简化,势流理论方法的短波增阻预报精度差,而经验方法在不同船型中的适用性不强。以有航速VLCC船迎浪航行为例,考虑吃水和航速影响,对理论和半经验方法的波浪增阻结果进行验证和比较分析,并总结出适用特定船型的快速精确预报方法。理论方法基于水平线段移动脉动源的三维面元法求解速度势问题,进而采用三维船体辐射能量法得到船舶辐射增阻,基于二阶波浪力定常分量公式计算得到绕射增阻;经验方法采用ISO15016-2015推荐的STAWAVE2方法。通过分析辐射和绕射增阻占比,讨论了目前方法的适用范围,进而对半经验方法的修正系数进行了研究,给出了反映相似船型和航速特征的改进公式。 相似文献
3.
针对十万吨级深远海养殖工船在波浪中的阻力和运动响应开展了船模试验与模拟计算,并对其最小推进功率进行了校核。以试验流体力学（EFD）模型试验与模型尺度计算流体力学（CFD）模拟计算的结果进行对比作为方法验证,将实尺度CFD模拟计算的结果直接用于最小推进功率的校核。结果显示,EFD模型试验结果与模型尺度CFD计算结果误差在10%左右,计算精度满足工程要求。在规定的恶劣海况下该船型波浪增阻占总阻力的比例最高可达56.3%,螺旋桨转矩可达最大转矩的63.9%。等级2简化评估法得到的最小推进功率为等级1线评估法给出的最小功率线值的58.9%。研究表明实尺度CFD模拟计算可直接用于船舶最小推进功率的校核,此深远海养殖工船使用等级2简化评估方法进行校核更容易满足规范要求,其最小推进功率应不小于6 833 kW。 相似文献
4.
In this paper, using a second-order steady-state approach and a three-dimensional (3D) pulsating source distribution method derives the nonlinear hydrodynamic forces on a ship advancing in waves. The nonlinear hydrodynamic forces considered here consist of the mean lateral drifting force and the added resistance, which can be expressed as products of the ship-motion responses, the radiation potential, diffraction potential and the incident-wave potential. All related velocity potentials applied in the calculations are in 3D form. The Series 60 and Marine ship hulls are used for numerical calculations and the results are compared with existing experimental data and two-dimensional (2D) solutions. The comparisons show that the results obtained in the paper generally agree with experimental data well. It is also found that the nonlinear hydrodynamic forces obtained based on the present 3D source distribution methods are indeed improved in some calculations compared with the 2D method, especially for the mean lateral drifting force. 相似文献
5.
Kyong-Hwan Kim 《Ocean Engineering》2011,38(13):1357-1367
This paper considers the numerical computation of added resistance on ships. As a method of solution, a higher-order Rankine panel method is applied in time domain. Furthermore, two different formulations, Neumann-Kelvin and double-body linearizations, are applied to investigate the difference between computational results. The quantities of added resistance are obtained by integrating the second-order pressure on the body surface. Computational results are validated by comparing with experimental data and other computational results on several models, and fair agreements are found for all the models. The components of added resistance are observed with regard to integral terms, radiation and diffraction components. This study continues to the computation of added resistance in irregular waves. This kind of computational approach can provide some important information to understand the uncertainty level of towing-tank measurement of added resistance. In this study, a series of long numerical simulations are carried out, and their statistical variations are observed for different time windows. Based on this observation, an appropriate criterion and averaging method are proposed for the prediction of added resistance in irregular waves. 相似文献
6.
Based on Green–Naghdi equation this work studies unsteady ship waves in shallow water of varying depth. A moving ship is regarded as a moving pressure disturbance on free surface. The moving pressure is incorporated into the Green–Naghdi equation to formulate forcing of ship waves in shallow water. The frequency dispersion term of the Green–Naghdi equation accounts for the effects of finite water depth on ship waves. A wave equation model and the finite element method (WE/FEM) are adopted to solve the Green–Naghdi equation. The numerical examples of a Series 60 (CB=0.6) ship moving in shallow water are presented. Three-dimensional ship wave profiles and wave resistance are given when the ship moves in shallow water with a bed bump (or a trench). The numerical results indicate that the wave resistance increases first, then decreases, and finally returns to normal value as the ship passes a bed bump. A comparison between the numerical results predicted by the Green–Naghdi equation and the shallow water equations is made. It is found that the wave resistance predicted by the Green–Naghdi equation is larger than that predicted by the shallow water equations in subcritical flow
, and the Green–Naghdi equation and the shallow water equations predict almost the same wave resistance when
, the frequency dispersion can be neglected in supercritical flows. 相似文献
7.
A technique for the evaluation of the hydrodynamic coefficients of ships is outlined for ship oscillating in a numerical wave tank, which is established on Computational Fluid Dynamics (CFD) theories. The numerical simulation of ship sections and bodies forced oscillating in the tank are carried out. The added mass and damping coefficients are obtained by the decomposition of the computational results, which agree well with the corresponding ones of potential theories. 相似文献
8.
A technique for the evaluation of the hydrodynamic coefficients of ships is outlined for ship oscillating in a numerical wave tank,which is established on Computational Fluid Dynamics (CFD) theories.The numerical simulation of ship sections and bodies forced oscillating in the tank are carried out.The added mass and damping coefficients are obtained by the decomposition of the computational results,which agree well with the corresponding ones of potential theories. 相似文献
9.
It is difficult to compute far-field waves in a relative large area by using one wave generation model when a large calculation domain is needed because of large dimensions of the waterway and long distance of the required computing points. Variation of waterway bathymetry and nonlinearity in the far field cannot be included in a ship fixed process either. A coupled method combining a wave generation model and wave propagation model is then used in this paper to simulate the wash waves generated by the passing ship. A NURBS-based higher order panel method is adopted as the stationary wave generation model; a wave spectrum method and Boussinesq-type equation wave model are used as the wave propagation model for the constant water depth condition and variable water depth condition, respectively. The waves calculated by the NURBS-based higher order panel method in the near field are used as the input for the wave spectrum method and the Boussinesq-type equation wave model to obtain the far-field waves. With this approach it is possible to simulate the ship wash waves including the effects of water depth and waterway bathymetry. Parts of the calculated results are validated experimentally, and the agreement is demonstrated. The effects of ship wash waves on the moored ship are discussed by using a diffraction theory method. The results indicate that the prediction of the ship induced waves by coupling models is feasible. 相似文献
10.
The motions of a high speed craft are highly influenced by speed and dynamic forces that begin to be important for high Froude numbers. Classical ship motions theories and some seakeeping programs do not include the effect of these dynamic forces that mainly affect to the damping of vertical motions, and have to be corrected to model high speed crafts. In any other way, the use of these theories or programs would be unrealistic. In this paper, some theories that can be used to predict the seakeeping behaviour of high speed crafts, considering dynamic forces, are studied and validated against seakeeping tests of some fast monohulls models. Tests and results focus on vertical motions in head seas, which are the most severe for these fast crafts. Experimental results of vertical motions are compared with numerical calculations and conclusions about the range of application of the presented theories are obtained. 相似文献
11.
12.
Ship-generated waves can contribute to the fatigue of offshore structures. This paper presents a numerical model for evaluating the forces exerted on a nearby fixed structure by ship-generated waves. The ship waves were modeled using Michell's thin-ship theory (Wigley waves), and the forces were computed using a boundary element method in the time domain. The simulation was validated by comparing its results with those of frequency-domain methods reported in the literature. It was then applied to calculate the forces exerted on a hemisphere by ship waves varying with the ship's speed, dimensions and distance from the hemisphere to the ship's path. Our results indicate that the ship waves have enormous effects on offshore structures and are not neglectable. 相似文献
13.
This paper considers a numerical analysis of ship maneuvering performance in the presence of incident waves and resultant ship motion responses. To this end, a time-domain ship motion program is developed to solve the wave–body interaction problem with the ship slip speed and rotation, and it is coupled with a modular-type 4-DOF maneuvering problem. In this coupled problem, the second-order mean drift force, which can play an important role in the ship maneuvering trajectory, is estimated by using a direct pressure integration method. The developed method is validated by observing the second-order mean drift force, and planar trajectories in maneuvering tests with and without the presence of incident waves. The comparisons are made for two ship models, Series 60 with block coefficient 0.7 and the S-175 containership, with existing experimental data. The maneuvering tests observed in this study include a zig-zag test in calm water, and turning tests in calm water and in regular waves. The present results show a fair agreement of overall tendency in maneuvering trajectories. 相似文献
14.
15.
Numerical investigation of the seakeeping behavior of a catamaran advancing in regular head waves 总被引：3，自引：0，他引：3
A numerical study was undertaken in order to assess the capability of an unsteady RANS code to predict the seakeeping characteristics of a high-speed multi-hull vessel in high sea states. Numerical analysis includes evaluation of ship motions, effects of wave steepness on ship response, catamaran natural frequency and added resistance in waves. Computations were performed for the DELFT 372 catamaran by the URANS solver CFDSHIP-Iowa V.4. The code was validated with encouraging results for high ship speeds (0.3≤Fn≤0.75) and high wave amplitudes (0.025≤Ak≤0.1). Comparison with strip theory solutions shows that the RANS method predicts ship motions with higher accuracy and allows the detection of nonlinear effects. Current computations evidence that heave peaks occur at resonance for all Fn, and reach the absolute maximum at Fn=0.75. Maximum pitch occurs at frequencies lower than resonance, for each speed, and absolute maximum occurs at medium Fn=0.6. Maximum added resistance, Raw, was computed at Fn=0.45, which, interestingly, is near the catamaran Fncoincidence. Overall, we found similar results as Simonsen et al. (2008) for KCS containership, though, herein, a multi-hull geometry and higher speeds were tested. Also, our results are useful to further evaluate the exciting forces and their correlation with fe and λ/Lpp. 相似文献
16.
The effects of free-surface waves on the floating structures are of great importance in the offshore industry. Among the six degrees of motions of a surface ship the absence of restoring forces in surge, sway and yaw led to critical situations for moored ships in the recent times. The order of forces in horizontal plane and their exciting frequencies are matters of interest. The resonance with the presence of moored chains led to many accidents in the recent past. The lines in dry conditions may not give good damping and in wet condition they may trigger the system to chaotic motions and jumps. Two different loading conditions of a container ship model are tested with waves in laboratory conditions in two different drafts. The mooring lines are chosen as per scale law and the energy under the response spectrum is determined from the plots. The results give new insights into the movement of a berthed ships subjected to waves. Response of the moored ship to different loading conditions in different water depths are discussed in this paper. The paper gives the order of energy due to first-order and slowly varying movement of a berthed container model in a towing tank. 相似文献
17.
Real sea conditions are characterized by multidirectional sea waves. However, the prediction of hull load responses in oblique waves is a difficult problem due to numeral divergence. This paper focuses on the investigation of numerical and experimental methods of load responses of ultra-large vessels in oblique regular waves. A three dimensional nonlinear hydroelastic method is proposed. In order to numerically solve the divergence problem of time-domain motion equations in oblique waves, a proportional, integral and derivative (PID) autopilot model is applied. A tank model measurement methodology is used to conduct experiments for hydroelastic responses of a large container ship in oblique regular waves. To implement the tests, a segmented ship model and oblique wave testing system are designed and assembled. Then a series of tests corresponding to various wave headings are carried out to investigate the vibrational characteristics of the model. Finally, time-domain numerical simulations of the ship are carried out. The numerical analysis results by the presented method show good agreement with experimental results. 相似文献
18.
《Ocean Engineering》2006,33(3-4):350-364
The aim of this paper is to investigate the propagation of ship waves on a sloping coast on the basis of results simulated by a 2D model. The governing equations used for the present model are the improved Boussinesq-type equations. The wave breaking process is parameterized by adding a dissipation term to the depth-integrated momentum equation. To give the boundary conditions at the ship location, the slender-ship approximation is used. It was verified that, although ship waves are essentially transient, the Snell's law can be applied to predict crest orientation of the wake system on a sloping coast. Based on simulated results, an applicable empirical formula to predict the maximum wave height on the slope is introduced. The maximum wave height estimated by the proposed method agrees well with numerical simulation results. 相似文献
19.
In this paper the joint density of waveheight and half-wavelength is considered for waves observed at a fixed time point and encountering waves that are overtaking a ship from behind. The densities for these two cases are related by a Doppler shift, expressed in terms of the relative velocity of the waves and the ship. Based on this observation, an approximation of the encountered density is proposed. This approximation is then investigated for a Gaussian sea having a Pierson–Moskowitz spectrum. 相似文献
20.
This paper outlines a procedure for the derivation of the differential equations describing the free response of a heaving and pitching ship from its stationary response to random waves. The coupled heave–pitch motion of a ship in random seas is modelled as a multi-dimensional Markov process. The partial differential equation describing the transition probability density function, known as the Fokker-Planck equation, for this process is derived. The Fokker-Planck equation is used to derive the random decrement equations for the coupled heave–pitch motion. The parameters in these equations are then identified using a neural network approach. The method is validated using numerical simulations and experimental results. The experimental data was obtained using an icebreaker ship model heaving and pitching in random waves. It is shown that the method produces good results when the system is lightly damped. An extension for using this method to identify couple heave–pitch motion in realistic seas is suggested. 相似文献