首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The lower plate is the dominant agent in modern convergent margins characterized by active subduction,as negatively buoyant oceanic lithosphere sinks into the asthenosphere under its own weight.This is a strong plate-driving force because the slab-pull force is transmitted through the stiff sub-oceanic lithospheric mantle.As geological and geochemical data seem inconsistent with the existence of modernstyle ridges and arcs in the Archaean,a periodically-destabilized stagnant-lid crust system is proposed instead.Stagnant-lid intervals may correspond to periods of layered mantle convection where efficient cooling was restricted to the upper mantle,perturbing Earth's heat generation/loss balance,eventually triggering mantle overturns.Archaean basalts were derived from fertile mantle in overturn upwelling zones(OUZOs),which were larger and longer-lived than post-Archaean plumes.Early cratons/continents probably formed above OUZOs as large volumes of basalt and komatiite were delivered for protracted periods,allowing basal crustal cannibalism,garnetiferous crustal restite delamination,and coupled development of continental crust and sub-continental lithospheric mantle.Periodic mixing and rehomogenization during overturns retarded development of isotopically depleted MORB(mid-ocean ridge basalt)mantle.Only after the start of true subduction did sequestration of subducted slabs at the coremantle boundary lead to the development of the depleted MORB mantle source.During Archaean mantle overturns,pre-existing continents located above OUZOs would be strongly reworked;whereas OUZOdistal continents would drift in response to mantle currents.The leading edge of drifting Archaean continents would be convergent margins characterized by terrane accretion,imbrication,subcretion and anatexis of unsubductable oceanic lithosphere.As Earth cooled and the background oceanic lithosphere became denser and stiffer,there would be an increasing probability that oceanic crustal segments could founder in an organized way,producing a gradual evolution of pre-subduction convergent margins into modern-style active subduction systems around 2.5 Ga.Plate tectonics today is constituted of:(1)a continental drift system that started in the Early Archaean,driven by deep mantle currents pressing against the Archaean-age sub-continental lithospheric mantle keels that underlie Archaean cratons;(2)a subduction-driven system that started near the end of the Archaean.  相似文献   

2.
For the last two decades, Iceland and other oceanic plateaux have been considered as potential analogues for the formation of the early Earth's continental crust. This study examines the compositions of silicic rocks from modern oceanic plateaux, revealing their differences to Archaean continental rock types (trondhjemite–tonalite–granodiorite or TTG) and thereby emphasising the contrasted mechanisms and/or sources for their respective origins. In most oceanic plateaux, felsic magmas are thought to be formed by fractional crystallization of basalts. In Iceland, the interaction between mantle plume and the Mid‐Atlantic ridge results in an abnormally high geothermal gradient and melting of the hydrated metabasaltic crust. However, despite the current `Archaean‐like' high geothermal gradients, melting takes place at a shallow depth and is unable to reproduce the TTG trace element signature. Consequently, oceanic plateaux are not suitable environments for the genesis of the Archaean continental crust. However, their subduction could account for the episodic crustal growth which has occurred throughout the Earth's history.  相似文献   

3.
《Gondwana Research》2013,24(4):1554-1566
The paradox of the Earth's continental crust is that although this reservoir is generally regarded as having differentiated from the mantle, it has an andesitic bulk composition that contrasts with the intrinsic basaltic composition of mantle-derived melts. Classical models for new crust generation from the mantle in two-stage processes fail to account for two fundamental facts: the absence of ultramafic residues in the lower crust and the hot temperature of batholith magma generation. Other models based on the arrival of already-fractionated silicic magmas to the crust have not received the necessary attention. Addition of new crust by relamination from below of subducted materials has been formulated as a process complementary to delamination of mafic residues. Here we show important support to relamination from below the lithosphere as an important mechanism for new crust generation in magmatic arcs of active continental margins and mature intraoceanic arcs. The new support is based on three independent lines: (1) thermo-mechanical modeling of subduction zones, (2) experimental phase relations and melt compositions of subducted materials and (3) geochemical relations between mafic granulites (lower crust) and batholiths (upper crust). The mineral assemblage and bulk geochemistry of lower crust rocks are compared with solid residues left after granite melt segregation. The implication is that an andesite magma precursor is responsible for the generation of new continental crust at active continental margins and mature oceanic arcs. According to our numerical and laboratory experiments, melting and eventual reaction with the mantle of subducted oceanic crust and sediments produce the andesite magmas. These ascend in the form of mantle wedge diapirs and are finally attached (relaminated) to the continental crust, where they crystallize partially and produce the separation of the solid fraction to form mafic granulites (lower crust) and granitic (sl) liquids to form the batholiths (upper crust).  相似文献   

4.
The protracted tectonic and magmatic record of cratons over the Archaean Eon has been classically interpreted in terms of long-lived shallow-dipping subduction or repeated mantle plumes. In this paper, we use the 1D conductive heat equation to model the evolution of the geotherm of a generic felsic-dominated Archaean cratonic nuclei solely considering the secular decay of radioactive isotopes (238U, 235U, 232Th, and 40K), responsible for heat production in the crust. Using a range of plausible parameters for crustal thickness, lithospheric thickness, and surface heat flux, this modelling shows that Archaean crust was characterized by an initially high geothermal gradient at 3.5 Ga, with a Moho temperature close to 900 °C, and that it might have remained partially molten for about one billion years. The existence of a partially molten crust for an extended period of time offers an alternative option to shallow-dipping subduction or repeated mantle plumes for the understanding of the peculiar tectonic evolution of Archaean cratons marked by (i) protracted high-temperature metamorphism and magmatism associated with crustal differentiation, and (ii) widespread deformation characterized by structural domes attributed to the development of crustal-scale gravitational instabilities.  相似文献   

5.
Subduction erosion, which occurs at all convergent plate boundaries associated with magmatic arcs formed on crystalline forearc basement, is an important process for chemical recycling, responsible globally for the transport of ~1.7 Armstrong Units (1 AU = 1 km3/yr) of continental crust back into the mantle. Along the central Andean convergent plate margin, where there is very little terrigenous sediment being supplied to the trench as a result of the arid conditions, the occurrence of mantle-derived olivine basalts with distinctive crustal isotopic characteristics (87Sr/86Sr ≥ 0.7050; εNd ≤ −2; εHf ≤ +2) correlates spatially and/or temporally with regions and/or episodes of high rates of subduction erosion, and a strong case can be made for the formation of these basalts to be due to incorporation into the subarc mantle wedge of tectonically eroded and subducted forearc continental crust. In other convergent plate boundary magmatic arcs, such as the South Sandwich and Aleutian Islands intra-oceanic arcs and the Central American and Trans-Mexican continental margin volcanic arcs, similar correlations have been demonstrated between regions and/or episodes of relatively rapid subduction erosion and the genesis of mafic arc magmas containing enhanced proportions of tectonically eroded and subducted crustal components that are chemically distinct from pelagic and/or terrigenous trench sediments. It has also been suggested that larger amounts of melts derived from tectonically eroded and subducted continental crust, rising as diapirs of buoyant low density subduction mélanges, react with mantle peridotite to form pyroxenite metasomatites that than melt to form andesites. The process of subduction erosion and mantle source region contamination with crustal components, which is supported by both isotopic and U-Pb zircon age data implying a fast and efficient connectivity between subduction inputs and magmatic outputs, is a powerful alternative to intra-crustal assimilation in the generation of andesites, and it negates the need for large amounts of mafic cumulates to form within and then be delaminated from the lower crust, as required by the basalt-input model of continental crustal growth. However, overall, some significant amount of subducted crust and sediment is neither underplated below the forearc wedge nor incorporated into convergent plate boundary arc magmas, but instead transported deeper into the mantle where it plays a role in the formation of isotopically enriched mantle reservoirs. To ignore or underestimate the significance of the recycling of tectonically eroded and subducted continental crust in the genesis of convergent plate boundary arc magmas, including andesites, and for the evolution of both the continental crust and mantle, is to be on the wrong side of history in the understanding of these topics.  相似文献   

6.
地壳放射性生热效应对大陆俯冲过程影响的数值模拟研究   总被引：1，自引：0，他引：1  
岩体中的放射性生热是地幔对流和地壳变质作用的关键热源之一,但地壳放射性生热率是如何影响大陆俯冲-碰撞的动力学过程,尤其是大陆碰撞区域的热结构演化,尚未获得共识。本文使用热-力学数值模拟方法对上、下地壳放射性生热率进行系统的模拟实验,以研究其对大陆俯冲动力学演化过程的影响。模型实验表明,由于大陆上地壳富集U、Th和K等主要放射性生热元素,且放射性生热率的变化区间较大(1.0~3.0μW/m~3),导致其对大陆俯冲碰撞动力学演化过程的影响较为显著,主要包括进入俯冲通道内的上地壳体积大小、碰撞区域内地壳熔融范围、俯冲下地壳物质折返的规模和两大陆的耦合程度等四个方面。而大陆下地壳则以中-基性岩为主,相对亏损U、Th、K等主要放射性生热元素,且放射性生热率的变化区域较小(0.2~0.8μW/m~3),致使其对大陆俯冲演化过程的影响相对有限,主要通过控制俯冲下地壳以及大陆板片的粘滞度和流变强度的大小,进而制约大陆俯冲过程下地壳物质折返的规模以及板片倾角的大小。  相似文献   

7.
Because of the strongly different conditions in the mantle of the early Earth regarding temperature and viscosity, present-day geodynamics cannot simply be extrapolated back to the early history of the Earth. We use numerical thermochemical convection models including partial melting and a simple mechanism for melt segregation and oceanic crust production to investigate an alternative suite of dynamics which may have been in operation in the early Earth. Our modelling results show three processes that may have played an important role in the production and recycling of oceanic crust: (1) Small-scale (x×100 km) convection involving the lower crust and shallow upper mantle. Partial melting and thus crustal production takes place in the upwelling limb and delamination of the eclogitic lower crust in the downwelling limb. (2) Large-scale resurfacing events in which (nearly) the complete crust sinks into the (eventually lower) mantle, thereby forming a stable reservoir enriched in incompatible elements in the deep mantle. New crust is simultaneously formed at the surface from segregating melt. (3) Intrusion of lower mantle diapirs with a high excess temperature (about 250 K) into the upper mantle, causing massive melting and crustal growth. This allows for plumes in the Archean upper mantle with a much higher excess temperature than previously expected from theoretical considerations.  相似文献   

8.
PLANK  T. 《Journal of Petrology》2005,46(5):921-944
Arc magmas and the continental crust share many chemical features,but a major question remains as to whether these features arecreated by subduction or are recycled from subducting sediment.This question is explored here using Th/La, which is low inoceanic basalts (<0·2), elevated in the continents(>0·25) and varies in arc basalts and marine sediments(0·09–0·34). Volcanic arcs form linear mixingarrays between mantle and sediment in plots of Th/La vs Sm/La.The mantle end-member for different arcs varies between highlydepleted and enriched compositions. The sedimentary end-memberis typically the same as local trench sediment. Thus, arc magmasinherit their Th/La from subducting sediment and high Th/Lais not newly created during subduction (or by intraplate, adakiteor Archaean magmatism). Instead, there is a large fractionationin Th/La within the continental crust, caused by the preferentialpartitioning of La over Th in mafic and accessory minerals.These observations suggest a mechanism of ‘fractionation& foundering’, whereby continents differentiate intoa granitic upper crust and restite-cumulate lower crust, whichperiodically founders into the mantle. The bulk continentalcrust can reach its current elevated Th/La if arc crust differentiatesand loses 25–60% of its mafic residues to foundering. KEY WORDS: arc magmatism; continental crust; delamination; thorium; sediment subduction  相似文献   

9.
Herv Martin 《Lithos》1993,30(3-4):373-388
The petrographic and chemical composition of magmatic rocks generated during the Archaean appears to be different from that of post-Archaean rocks. Komatiites are widespread before 2.5 Ga and rarely occur afterwards. In addition the Archaean continental crust is primarily TTG (Tonalitic, Trondhjemitic and Granodioritic) in composition, exhibiting typical trondhjemitic differentiation trends; whereas modern equivalents are granodioritic to granitic following classical calc-alkaline differentiation trends. This distinction becomes more prominent when rare-earth elements (REE) are taken into account: Archaean TTG are Yb-poor (YbN < 8.5) and have high (La/Yb) ratios (5 < (La/Yb)N < 150), in comparison, the post-2.5 Ga granitoids, emplaced in subduction-zone geodynamic environments have high Yb content (4.5N<20) with very low (La/Yb)N ratios ( 20). Theoretical calculations and experimental petrology have shown that the TTG can be produced by partial melting of an Archaean tholeiite transformed into garnet-bearing amphibolite. Consequently, the low heavy REE content of the TTG is explained by the influence of both residual garnet and hornblende in their source. After 2.5 Ga the role of these minerals in calc-alkaline magma genesis becomes progressively less important, which is interpreted in terms of a cooling Earth model.

In modern subduction zone environments the subducted oceanic slab is relatively “old and cold” and the geothermal gradient along the Benioff plane in low (ca. 10°C/km). Consequently, the down-going lithosphere undergoes dehydration before partial melting is able to occur. The liberated fluids are light REE and LILE-enriched and ascend into the overlying mantle wedge where they induced partial fusion. The produced magmas separate from their mantle source region leaving a residue mainly composed of olivine and pyroxenes. Mantle derived magmas typically exhibit high Yb contents due to low KDYb values for olivine and pyroxenes. During the Archaean, the subducted lithosphere was relatively “young and hot” providing high geothermal gradients along the Benioff zone. Thus, partial melting of the subducted slab was possible at lower temperatures before dehydration would take place. Garnet and hornblende are the main residual phases accounting for the low Yb contents of the Archaean TTG.

This model can be tested using a modern analogue of Archaean-like subduction processes. In south Chile an oceanic ridge has subducted and all thermodynamic calculations indicate that this creates locally high geothermal gradients along the Benioff zone. Thus in very small areas, Archaean-like environments may be simulated in modern subduction zones. The modern andesites produced in this environment show Archaean geochemical characteristics with low YbN (<5), whereas the majority of andesites along the Andean arc have modern patterns with YbN ranging from 8 to more than 17. This conclusion was generalised to all young subducted lithospheres all over the world.

In conclusion, it appears that since the Archaean there has been a change in the site of continental crust genesis. The location of calc-alkaline magma source in subduction-zone environments has migrated through time from the subducted slab to the mantle wedge. This is a direct consequence of the progressive cooling of the Earth.  相似文献   


10.
There is no consensus on the processes responsible for near-coeval formation of Archaean continental crust (dominantly tonalite-trondhjemite-granodiorite: TTG), greenstone belts dominated by komatiitic to tholeiitic lavas (KT), and sub-continental lithospheric mantle (SCLM). The Douglas Harbour domain (2.7-2.9 Ga) of the Minto Block, northeastern Superior Province, has two TTG suites, the western and eastern Faribault-Thury (WFT and EFT), with embedded KT greenstones. Tonalites of both suites have high light/heavy rare-earth element ratios (L/HREE), high large ion lithophile element (U-Th-Rb-Cs-La: LILE) contents, positive Sr-Pb anomalies, and negative Nb-Ta-Ti anomalies. Such typical Archaean TTG signatures are commonly explained by melting of subducted oceanic crust, but could also originate by melting the base of thick basaltic plateaux formed above mantle upwellings (plumes), leaving behind restites containing pyroxene, garnet, and rutile. Field relationships (in situ segregation veins), phase equilibria (hornblende stabilized at lower crustal pressure), petrography (corroded epidote and muscovite phenocrysts, rare plagioclase phenocrysts), and trace element models, all imply that FT tonalite to trondhjemite evolution reflects hornblende-dominated fractional crystallization, not partial melting of subducted crust. The geochemistry of parental FT tonalites can be modeled by 15-30% melting of FT tholeiitic metabasalts, with residues of eclogite, garnet-websterite, or hornblende-garnet websterite. A minor residual Ti-phase such as rutile is also needed to generate negative Ti-Nb-Ta troughs in the TTGs. However, large volumes of eclogitic restites complementary to TTG are not observed either at the base of Archaean crustal sections, or in the SCLM. Additional problems with slab-melting models include: (a) the rarity of lithologies and associations characteristic of active margins (ophiolites, andesites, blueschists, accretionary mélanges, molasse, flysch, high-pressure belts, and thrust-and-fold belts); (b) the need to deliver plume-derived KT melt through the slab; and (c) extracting enough TTG melt from a subducting slab in the time available (200-300 my). In the plateau-melting model, heat for crustal anatexis is supplied by ongoing KT magma derived from mantle upwellings. However, SCLM rocks differ from predicted 1-stage mantle melting residua; and the voluminous residual eclogites complementary to TTG generation somehow need to be removed. These two problems might solve one another if the dense crustal restites disaggregated and mixed into the underlying depleted mantle. Mantle melting slows upon exhaustion of Ca-Al-rich phases, with large temperature increases needed to extract more melt from harzburgite residua. Physical addition of delaminated crustal restites would refertilize the refractory mantle, allowing extraction of additional melt increments, and might explain the ultra-depleted and orthopyroxene-rich nature of the SCLM. A hybrid source composed of 10% eclogitic restite of EFT tonalite generation, mixed with harzburgitic residues from 25% melting of primitive mantle, yields model melts with trace element signatures resembling typical Munro komatiites. Variations in the mineralogy and geochemistry of the delaminated component might account for the diversity of komatiite types. Degassing of hornblende-rich delaminated restites would transfer LILE to surrounding depleted mantle and could generate boninites. Fusion of undepleted metabasalt sandwiched among denser restites could generate sanukitoids. Mantle melt pulses generated by catastrophic delamination events would underplate nascent TTG crust and trigger renewed crustal melting, followed by delamination of newly formed eclogitic restites, triggering additional mantle melting, and so on. I posit that delamination of crustal restites catalyzed multi-stage melting of the SCLM and maturation of the Archaean continental crust. Thus, Archaean crust and SCLM are genetically inter-linked, and both form above major mantle upwellings.  相似文献   

11.
We use published and new trace element data to identify element ratios which discriminate between arc magmas from the supra-subduction zone mantle wedge and those formed by direct melting of subducted crust (i.e. adakites). The clearest distinction is obtained with those element ratios which are strongly fractionated during refertilisation of the depleted mantle wedge, ultimately reflecting slab dehydration. Hence, adakites have significantly lower Pb/Nd and B/Be but higher Nb/Ta than typical arc magmas and continental crust as a whole. Although Li and Be are also overenriched in continental crust, behaviour of Li/Yb and Be/Nd is more complex and these ratios do not provide unique signatures of slab melting. Archaean tonalite-trondhjemite-granodiorites (TTGs) strongly resemble ordinary mantle wedge-derived arc magmas in terms of fluid-mobile trace element content, implying that they did not form by slab melting but that they originated from mantle which was hydrated and enriched in elements lost from slabs during prograde dehydration. We suggest that Archaean TTGs formed by extensive fractional crystallisation from a mafic precursor. It is widely claimed that the time between the creation and subduction of oceanic lithosphere was significantly shorter in the Archaean (i.e. 20 Ma) than it is today. This difference was seen as an attractive explanation for the presumed preponderance of adakitic magmas during the first half of Earth's history. However, when we consider the effects of a higher potential mantle temperature on the thickness of oceanic crust, it follows that the mean age of oceanic lithosphere has remained virtually constant. Formation of adakites has therefore always depended on local plate geometry and not on potential mantle temperature.  相似文献   

12.
It is speculated that until Late Carboniferous time the region of Hercynian Europe was occupied by an elongated island arc system underlain by a segment of continental crust. In the Upper Carboniferous, two subduction zones are assumed to have extended from the north and south beneath Hercynian Europe. An extensive zone of hot, partially molten upper mantle lay above and between these, and diapiric uprise of portions of this material led to separation of mafic magmas, widespread partial melting in the lower and middle crust, high temperature-low pressure metamorphism in crustal rocks, and regional uplift and extension of the crust, as indicated by intermontane troughs and their associated volcanic rocks.In Visean to Westphalian time Hercynian Europe collided with both the large neighbouring plates North America-Europe and Africa. During these diachronous collisions and owing to reduced rigidity of the relatively hot island arc crust, the irregular continental margins of the larger and thicker continental plates induced oroclinal bending of Hercynian Europe. After the collision processes had been terminated, processes of upper mantle activity continued, causing further crustal uplift and even, enhanced crustal extension for several tens of million years into the Lower Permian. Decline of the upper mantle activity beneath Hercynian Europe is indicated by crustal subsidence and formation of a peneplain in Permian time followed by the Upper Permian transgression of both the Zechstein sea and the Tethys sea which mark the end of the Hercynian geodynamic cycle.  相似文献   

13.
http://www.sciencedirect.com/science/article/pii/S1674987114000309   总被引：8，自引：2，他引：6  
In the early 1980s, evidence that crustal rocks had reached temperatures 〉1000 ℃ at normal lower crustal pressures while others had followed low thermal gradients to record pressures characteristic of mantle conditions began to appear in the literature, and the importance of melting in the tectonic evolution of orogens and metamorphic-metasomatic reworking of the lithospheric mantle was realized. In parallel, new developments in instrumentation, the expansion of in situ analysis of geological ma- terials and increases in computing power opened up new fields of investigation. The robust quantifi- cation of pressure （P）, temperature （T） and time （t） that followed these advances has provided reliable data to benchmark geodynamic models and to investigate secular change in the thermal state of the lithosphere as registered by metamorphism through time. As a result, the last 30 years have seen sig- nificant progress in our understanding of lithospheric evolution, particularly as it relates to Precambrian geodynamics.  相似文献   

14.
Late Archaean komatiitic lavas from Newton Township, Ontario, consist of 6 chemically distinct magma types: 3 komatiites and 3 komatiitic basalts. The succession is unusual in containing both Al- and HREE-depleted komatiites and Al- and HREE-undepleted komatiites. The two types form distinct stratigraphic units separated by komatiitic basalts. Two komatiite types are strongly LREE depleted, whilst the third and the associated komatiitic basalts range from mildly depleted to enriched. Of the six magma types, only the two strongly LREE depleted komatiites represent primary mantle melts. The other komatiite type and the komatiitic basalts were derived from the primary komatiite magmas by combinations of olivine (+chromite) fractionation, assimilation of continental crust, and magma mixing. The two primary magmas may have been derived from similar sources, their contrasting chemistry being due to differing degrees of garnet segregation during melting. A generally applicable conclusion is that a wide range of komatiitic magma types can be generated from a relatively homogeneous depleted mantle, under conditions likely to prevail during the eruption of late Archean greenstone belt sequences.  相似文献   

15.
The majority of continental crust formed during the hotter Archean was composed of Tonalite-Trondhjemite-Granodiorite (TTG) rocks. In contrast to the present-day loci of crust formation around subduction zones and intra-plate tectonic settings, TTGs are formed when hydrated basalt melts at garnet-amphibolite, granulite or eclogite facies conditions. Generating continental crust requires a two step differentiation process. Basaltic magma is extracted from the pyrolytic mantle, is hydrated, and then partially melts to form continental crust. Here, we parameterise the melt production and melt extraction processes and show self-consistent generation of primordial continental crust using evolutionary thermochemical mantle convection models. To study the growth of TTG and the geodynamic regime of early Earth, we systematically vary the ratio of intrusive (plutonic) and eruptive (volcanic) magmatism, initial core temperature, and internal friction coefficient. As the amount of TTG that can be extracted from the basalt (or basalt-to-TTG production efficiency) is not known, we also test two different values in our simulations, thereby limiting TTG mass to 10% or 50% of basalt mass. For simulations with lower basalt-to-TTG production efficiency, the volume of TTG crust produced is in agreement with net crustal growth models but overall crustal (basaltic and TTG) composition stays more mafic than expected from geochemical data. With higher production efficiency, abundant TTG crust is produced, with a production rate far exceeding typical net crustal growth models but the felsic to mafic crustal ratio follows the expected trend. These modelling results indicate that (i) early Earth exhibited a “plutonic squishy lid” or vertical-tectonics geodynamic regime, (ii) present-day slab-driven subduction was not necessary for the production of early continental crust, and (iii) the Archean Earth was dominated by intrusive magmatism as opposed to “heat-pipe” eruptive magmatism.  相似文献   

16.
The present balance of crust creation at ocean ridges and above subduction zones appears to be similar to crust removal processes at subduction zones. Almost 10% of the mass of the upper mantle has been influenced by surface hydrosphere, atmosphere and crustal component contamination. As long as surface components are subducted, then in a slowly cooling planet it is difficult to see how the mass of continents and hydrosphere can increase with time.  相似文献   

17.
The thickness and geothermal gradient of Archean continental crust are critical factors for understanding the geodynamic processes in Earth's early continental crust. Archean tonalite-trondhjemite-granodiorite (TTG) gneisses provide one of the potential indicators of paleo-crustal thickness and geothermal gradient because crust-derived TTG melts are generally thought to originate from partial melting of mafic rocks at the crustal root. In the Western Shandong Province (WSP) of the North China Craton (NCC), two episodes of Neoarchean TTG magmatism are recognized at ~2.70 Ga and ~2.55 Ga which were sourced from partial melting of juvenile crustal components. The ~2.70 Ga TTG gneisses show highly fractionated rare earth element (REE) patterns (average (La/Yb)N = 39), whereas the ~2.55 Ga TTG gneisses have relatively less fractionated REE patterns (average (La/Yb)N = 18). Petrogenetic evaluation suggest that the magmatic precursors of the TTG gneisses of both episodes originated from partial melting of juvenile crustal materials at different crustal depths with residual mineral phases of Grt, Cpx, Amp, Pl and Ilm. Together with the garnet proportion in the residue, the P–T pseudosections of equilibrium mineral assemblages, and the temperature calculated from Titanium-in-zircon thermometer, we estimate the Neoarchean crustal thicknesses as 44–51 km with geothermal gradients of 17 to 20 °C/km for the ~2.70 Ga TTG gneisses whereas the ~2.55 Ga TTG gneisses show lesser crustal thicknesses of 35–43 km with geothermal gradients of 19 to 26 °C/km, with an approximately 10 km difference in crustal thickness. Our estimates on the thicknesses and geothermal gradients of the Neoarchean crust are similar to those (~41 km, ~20 °C/km) of the modern average continental crust, indicating that a modern-style plate tectonic regime may have played an important role in the formation and evolution of the Neoarchean continental crust in the NCC.  相似文献   

18.
地壳与弱化岩石圈地幔的相互作用:以燕山造山带为例   总被引：9，自引：2，他引：9  
燕山造山带中生代发育4期钙碱性火山活动,它们的源区组成都是受壳幔相互作用的制约,其中髫髻山组和义县组分布广泛,具有代表性．髫髻山组岩性比较单一,地球化学参数变化范围小,岩浆的AFC作用不强烈,源区成分不复杂．依据Kay et al．(1991)的方法,估算了早-中侏罗世燕山地区的地壳厚度为40-45 km.髫髻山组粗安岩是在加厚的地壳 (40-45 km)条件下,源区是含角闪石的石榴石麻粒岩 底侵的基性岩的壳幔过渡带熔融形成．义县组火山岩的源区为下地壳 岩石圈地幔,地幔组分较髫髻山组增加．研究区中生代早期地壳开始加厚,发生下地壳拆沉,进入流变学性质改变了的“弱化的岩石圈地幔”,二者发生作用．岩石圈地幔在中生代晚期受到流体、熔体、地幔矿物中活化的分子水、剪切构造作用,以及温、压条件改变的影响,导致岩石圈地幔发生不均一的局部弱化,为容纳拆沉的下地壳提供了优化场所．推测弱化岩石圈地幔出现于135 Ma以后燕山地区发育的小型拉伸盆地之下,以及对应的小型软流圈底辟体之上．上述模型可以与俯冲带的楔形地幔与俯冲洋壳的相互作用相对比．  相似文献   

19.
杨文采 《地质论评》2014,60(5):945-961
本篇讨论大陆岩石圈拆沉、伸展与裂解作用过程。由于大陆岩石圈厚度大而且很不均匀,产生裂谷的机制比较复杂。大陆碰撞远程效应的触发,岩石圈拆沉,以及板块运动的不规则性和地球应力场方向转折,都可能产生岩石圈断裂和大陆裂谷。岩石圈拆沉为在重力作用下"去陆根"的作用过程,演化过程可分为大陆根拆离、地壳伸展和岩石圈地幔整体破裂三个阶段。大陆碰撞带、俯冲的大陆和大洋板块、克拉通区域岩石圈,都可能产生岩石圈拆沉。大陆岩石圈调查表明,拉张区可见地壳伸展、岩石圈拆离、软流圈上拱和热沉降;它们是大陆岩石圈伸展与裂解早期的主要表现。从初始拉张的盆岭省到成熟的张裂省,拆离后地壳伸展成复式地堑,下地壳幔源玄武岩浆侵位,断裂带贯通并切穿整个岩石圈,表明地壳伸展进入成熟阶段。中国东北松辽盆地和西欧北海盆地曾处于成熟的张裂省。岩石圈破裂为岩浆侵位提供了阻力很小的通道网。岩浆侵位作用伴随岩石圈破裂和热流体上涌,成熟的张裂省可发展成大陆裂谷。多数的大陆裂谷带并没有发展成威尔逊裂谷带和洋中脊,普通的大陆裂谷要演化为威尔逊裂谷带,必须有来自软流圈的长期和持续的热流和玄武质岩浆的供应。威尔逊裂谷带岩石圈地幔和软流圈为地震低速带,其根源可能与来自地幔底部的地幔热羽流有关。  相似文献   

20.
High‐T, low‐P metamorphic rocks of the Palaeoproterozoic central Halls Creek Orogen in northern Australia are characterised by low radiogenic heat production, high upper crustal thermal gradients (locally exceeding 40 °C km?1) sustained for over 30 Myr, and a large number of layered mafic‐ultramafic intrusions with mantle‐related geochemical signatures. In order to account for this combination of geological and thermal characteristics, we model the middle crustal response to a transient mantle‐related heat pulse resulting from a temporary reduction in the thickness of the mantle lithosphere. This mechanism has the potential to raise mid‐crustal temperatures by 150–400 °C within 10–20 Myr following initiation of the mantle temperature anomaly, via conductive dissipation through the crust. The magnitude and timing of maximum temperatures attained depend strongly on the proximity, duration and lateral extent of the thermal anomaly in the mantle lithosphere, and decrease sharply in response to anomalies that are seated deeper than 50–60 km, maintained for <5 Myr in duration and/or have half‐widths <100 km. Maximum temperatures are also intimately linked to the thermal properties of the model crust, primarily due to their influence on the steady‐state (background) thermal gradient. The amplitudes of temperature increases in the crust are principally a function of depth, and are broadly independent of crustal thermal parameters. Mid‐crustal felsic and mafic plutonism is a predictable consequence of perturbed thermal regimes in the mantle and the lowermost crust, and the advection of voluminous magmas has the potential to raise temperatures in the middle crust very quickly. Although pluton‐related thermal signatures significantly dissipate within <10 Myr (even for very large, high‐temperature intrusive bodies), the interaction of pluton‐ and mantle‐related thermal effects has the potential to maintain host rock temperatures in excess of 400–450 °C for up to 30 Myr in some parts of the mid‐crust. The numerical models presented here support the notion that transient mantle‐related heat sources have the capacity to contribute significantly to the thermal budget of metamorphism in high‐T, low‐P metamorphic belts, especially in those characterised by low surface heat flow, very high peak metamorphic geothermal gradients and abundant mafic intrusions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号