首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
本文采用天然地震近震走时反演地壳三维速度结构的方法获得了郯庐断裂带鲁苏皖段及附近地壳(30°N—37°N,113°E—122°E)三维速度结构.对地壳内分层速度结构的分析发现,郯庐断裂带鲁苏皖段存在速度的分段特征.郯庐断裂带鲁苏皖段浅层35.3°N以北,34.5°N—35.3°N间,33°N—34.5°N间呈现的速度分段和地表出露地层有关,与地质上安丘段、莒县—郯城段,新沂—泗洪段三个破裂单元相对应,且和各段的地震活动相呼应,表明郯庐带新沂到泗洪段可能是断裂的闭锁段.郯庐断裂带鲁苏皖段地壳速度结构自浅至深分为三段,大体位置是:南段(32.5°N—33°N以南),中段(32.5°N—33°N至35°N—35.3°N),北段(35°N—35.3°N以北).上地壳分段与苏鲁超高压变质岩带的插入有关,中、下地壳速度分段则可能和火山岩滞留有关.地壳各层速度结构不同段的速度差异反映了构造块体的速度差异,表明各构造块体在地壳下部仍有差异,郯庐带西侧速度总体高于东侧,反映了不同构造块体的形成和组成差别,也说明了该断裂带可能延伸到莫霍面.而不同深度的分段性可能反映了不同地质演化过程.  相似文献   

2.
山东中部一条明显的北西向中强地震带   总被引：1，自引：0，他引：1  
长清－临沂地震带是山东中部一条明显的北西向中强地震带,由９次中强地震组成。这些地震沿北西向展布,主要分布在四个震源区,大致呈５０￣５５ｋｍ等间距分布。除１６６８年郯城地震与北北东向的郯庐断裂带有关外,其它地震受北西向蒙山断裂控制,是该断裂各为层段新活动的结果。另外,该地城带内地震的发生还有一定深部构造背景。未来应注意研究该带内再次发生中强地震的可能。  相似文献   

3.
The 2008 Wenchuan earthquake occurred along the Longmen Shan fault zone, only five years later, another M7 Lushan earthquake struck the southern segment where its seismic risk has been highly focused by multiple geoscientists since this event. Through geological investigations and paleoseismic trenching, we suggest that the segment along the Shuangshi-Dachuan Fault at south of the seismogenic structure of the Lushan earthquake is active during Holocene. Along the fault, some discontinuous fault trough valleys developed and the fault dislocated the late Quaternary strata as the trench exposed. Based on analysis of historical records of earthquakes, we suggest that the epicenter of the 1327 Tianquan earthquake should be located near Tianquan and associated with the Shuangshi-Dachuan Fault. Furthermore, we compared the ranges of felt earthquakes(the 2013 M7 Lushan earthquake and the 1970 MS6.2 Dayi earthquake)and suggest that the magnitude of the 1327 Tianquan earthquake is more possible between 6½ and 7. The southern segment of the Longmen Shan fault zone behaves as a thrust fault system consisting of several sub-paralleled faults and its deep structure shows multiple layers of decollement, which might disperse strain accumulation effectively and make the thrust system propagate forward into the foreland basin, creating a new decollement on a gypsum-salt bed. The soft bed is thick and does not facilitate to constrain fault deformation and accumulate strain, which produces a weak surface tectonic expression and seismic activity along the southern segment, this is quite different from that of the middle and northern segments of the Longmen Shan fault zone.  相似文献   

4.
Nine earthquakes with M≥6 have stricken the northern segment of the Red River fault zone since the historical records, including the 1652 Midu M7 earthquake and the 1925 Dali M7 earthquake. However, there have been no earthquake records of M≥6 on the middle and southern segments of the Red River Fault, since 886 AD. Is the Red River fault zone, as a boundary fault, a fault zone where there will be not big earthquake in the future or a seismogenic structure for large earthquake with long recurrence intervals?This problem puzzles the geologists for a long time. Through indoor careful interpretation of high resolution remote sensing images, and in combination with detailed field geological and geomorphic survey, we found a series of fault troughs along the section of Gasha-Yaojie on the southern segment of the Red River fault zone, the length of the Gasha-Yaojie section is over ten kilometers. At the same time, paleoseismic information and radiocarbon dating result analysis on the multiple trenches show that there exists geological evidence of seismic activity during the Holocene in the southern segment of the Red River fault zone.  相似文献   

5.
郯庐断裂带中南段地壳介质散射强度   总被引：1，自引：0，他引：1       下载免费PDF全文
本研究运用远震扰动场方法,利用134个数字地震观测台记录的10次远震记录对郯庐断裂带中南段地壳介质散射强度进行研究.结果表明,研究区上、下地壳介质散射强度呈现强烈的横向非均匀性特征,上、下地壳介质散射强度空间分布特征基本一致,散射强度高值区主要分布在华北断块区及秦岭—大别褶皱系的东部地区,散射强度低值区主要分布在下扬子断块区,散射强度峰值区主要分布在六安、莒南、嘉山、烟台等地.地壳介质散射强度与构造块体具有较强的相关性,构造块体不同,地壳介质散射强度则存在一定的差异;沿郯庐断裂带地壳介质散射强度呈现分段性特征,可分为潍坊至临沂段、临沂至嘉山段以及嘉山至九江段三段;地震活动与地壳介质散射强度有较强的相关性,地震多发生在地壳介质散射强度梯度带上,郯庐断裂带的潍坊至临沂段、嘉山至九江段地壳介质散射强度梯度较大,此段中小地震活动较强,而临沂至嘉山段地壳介质散射强度梯度小,中小地震活动相对较弱.地壳介质散射强度与构造块体、断裂构造及地震活动之间的相关性,除反映了深部介质物性可能存在差异外,也可能与深部介质物理形态、物质运移以及深部应力应变环境的变化有关.  相似文献   

6.
On the day Wu-wu of the second month in the second year of Chuyuan period in the reign of Emperor Yuan of the western Han Dynasty, that is, April 17, 47 BC, an earthquake occurred near the county seat of Huandao County, Longxi Prefecture. This earthquake caused serious damages to the city wall, government office buildings and civilian houses in the Huandao county seat, many people died, landslides, ground fracturing and spring gushing, etc. occurred. On the basis of textual research on the historical earthquake data and the field investigation, we affirm that the ancient Huandao county seat locates at the new Wangjia Village of Santai, southeast of Wenfeng Town in Longxi County at present. The ancient Huandao county seat is the most seriously damaged area according to the historical earthquake data, so it should be in the meizoseismal area of this earthquake. The epicenter intensity of this earthquake is about 9~10 degrees, and the magnitude of this earthquake is estimated to be about 7. Considering the intensities of other towns damaged during this earthquake, we draw the isoseismal lines of this earthquake, with its major axis directed NNW. The direction of the major axis of the isoseismal lines and the location of the epicenter are approximately consistent with the strike of the western segment of the Gangu-Wushan secondary fault on the northern margin of western Qinling fault zone. This fault segment has clear evidences of new activity during late Holocene, which are characterized by left-lateral strike-slip faulting with normal components; the fault dips NE and faulted the T1-T2 pluvial and alluvial terraces. Up to now, there are some surface deformation traces, such as deeply-incised seismic fault grooves, densely developed structural tensional fractures in the loess stratum, landslides and a series of beaded dolines etc. Combining the results of relocation of small to moderate earthquakes in the research area and comprehensive analysis on their distribution features in plane and profile, we get the results that the causative structure of the 47 BC Longxi earthquake is the western segment of Gangu-Wushan secondary fault on the northern margin of western Qinling fault zone. This fault zone is an important active block boundary fault in the eastern margin of Tibeten block, and has the tectonic condition to generate M ≥ 7 large earthquakes in the past and in the future.  相似文献   

7.
南北地震带北段近期强震趋势研究   总被引：2，自引：1，他引：1  
2008年5月12日汶川8.0级地震后,南北地震带可能进入新一轮的强震活跃期.从汶川8.0级地震以来ML≥5.0地震活动空间分布特征来看,近期南北地震带北段与中、南段存在较大差异.由南北地震带强震前孕震区中强地震活动特征,并结合当前5级地震活动情况,认为应同时关注南北地震带中、南段和北段的强震危险性.甘东南地区出现的4级地震空区被2011年2月23日迭部-岷县交界ML4.4地震打破后,2011年11月1日空区周边又发生了青川Ms5.4地震,表明该空区及周边地区的地震活动增强.类比1990年共和7.0级地震前的空区演化过程,认为甘东南地区存在发生7级地震的可能.结合对甘东南地区主要大型断裂7级地震复发周期的综合分析认为,需关注南北带北段毛毛山断裂和金强河断裂、香山-天景山断裂东段、黄河断裂灵武段、西秦岭北缘断裂、六盘山-宝鸡断裂和东昆仑断裂东段玛沁-玛曲段发生7级地震的可能.  相似文献   

8.
On August 8, 2017, a strong earthquake of M7.0 occurred in Jiuzhaigou County, Aba Prefecture, northern Sichuan. The earthquake occurred on a branch fault at the southern end of the eastern section of the East Kunlun fault zone. In the northwest of the aftershock area is the Maqu-Maqin seismic gap, which is in a locking state under high stress. Destructive earthquakes are frequent along the southeast direction of the aftershocks area. In Songpan-Pingwu area, only 50~80km away from the Jiuzhaigou earthquake, two M7.2 earthquakes and one M6.7 earthquake occurred from August 16 to 23, 1976. Therefore, the Jiuzhaigou earthquake was an earthquake that occurred at the transition part between the historical earthquake fracture gap and the neotectonic active area. Compared with other M7.0 earthquakes, there are few moderate-strong aftershocks following this Jiuzhaigou earthquake, and the maximum magnitude of aftershocks is much smaller than the main shock. There is no surface rupture zone discovered corresponding to the M7.0 earthquake. In order to understand the feature of source structure and the tectonic environment of the source region, we calculate the parameters of the initial earthquake catalogue by Loc3D based on the digital waveform data recorded by Sichuan seismic network and seismic phase data collected by the China Earthquake Networks Center. Smaller events in the sequence are relocated using double-difference algorithm; source mechanism solutions and centroid depths of 29 earthquakes with ML≥3.4 are obtained by CAP method. Moreover, the source spectrum of 186 earthquakes with 2.0≤ML≤5.5 is restored and the spatial distribution of source stress drop along faults is obtained. According to the relocations and focal mechanism results, the Jiuzhaigou M7.0 earthquake is a high-angle left-lateral strike-slip event. The earthquake sequence mainly extends along the NW-SE direction, with the dominant focal depth of 4~18km. There are few shallow earthquakes and few earthquakes with depth greater than 20km. The relocation results show that the distribution of aftershocks is bounded by the M7.0 main shock, which shows obvious segmental characteristics in space, and the aftershock area is divided into NW segment and SE segment. The NW segment is about 16km long and 12km wide, with scattered and less earthquakes, the dominant focal depth is 4~12km, the source stress drop is large, and the type of focal mechanism is complicated. The SE segment is about 20km long and 8km wide, with concentrated earthquakes, the dominant depth is 4~12km, most moderate-strong earthquakes occurred in the depth between 11~14km. Aftershock activity extends eastward from the start point of the M7.0 main earthquake. The middle-late-stage aftershocks are released intensively on this segment, most of them are strike-slip earthquakes. The stress drop of the aftershock sequence gradually decreases with time. Principal stress axis distribution also shows segmentation characteristics. On the NW segment, the dominant azimuth of P axis is about 91.39°, the average elevation angle is about 20.80°, the dominant azimuth of T axis is NE-SW, and the average elevation angle is about 58.44°. On the SE segment, the dominant azimuth of P axis is about 103.66°, the average elevation angle is about 19.03°, the dominant azimuth of T axis is NNE-SSW, and the average elevation angle is about 15.44°. According to the fault profile inferred from the focal mechanism solution, the main controlling structure in the source area is in NW-SE direction, which may be a concealed fault or the north extension of Huya Fault. The northwest end of the fault is limited to the horsetail structure at the east end of the East Kunlun Fault, and the SE extension requires clear seismic geological evidence. The dip angle of the NW segment of the seismogenic fault is about 65°, which may be a reverse fault striking NNW and dipping NE. According to the basic characteristics of inverse fault ruptures, the rupture often extends short along the strike, the rupture length is often disproportionate to the magnitude of the earthquake, and it is not easy to form a rupture zone on the surface. The dip angle of the SE segment of the seismogenic fault is about 82°, which may be a strike-slip fault that strikes NW and dips SW. The fault plane solution shows significant change on the north and south sides of the main earthquake, and turns gradually from compressional thrust to strike-slip movement, with a certain degree of rotation.  相似文献   

9.
The Tan-Lu Fault Zone(TLFZ), a well-known lithosphere fault zone in eastern China, is a boundary tectonic belt of the secondary block within the North China plate, and its seismic risk has always been a focus problem. Previous studies were primarily conducted on the eastern graben faults of the Yishu segment where there are historical earthquake records, but the faults in western graben have seldom been involved. So, there has been no agreement about the activity of the western graben fault from the previous studies. This paper focuses on the activity of the two buried faults in the western graben along the southern segment of Yishu through combination of shallow seismic reflection profile and composite drilling section exploration. Shallow seismic reflection profile reveals that the Tangwu-Gegou Fault(F4)only affects the top surface of Suqian Formation, therefore, the fault may be an early Quaternary fault. The Yishui-Tangtou Fault(F3)has displaced the upper Pleistocene series in the shallow seismic reflection profile, suggesting that the fault may be a late Pleistocene active fault. Drilling was implemented in Caiji Town and Lingcheng Town along the Yishui-Tangtou Fault(F3)respectively, and the result shows that the latest activity time of Yishui-Tangtou Fault(F3)is between(91.2±4.4)ka and(97.0±4.8)ka, therefore, the fault belongs to late Pleistocene active fault. Combined with the latest research on the activity of other faults along TLFZ, both faults in eastern and western graben were active during the late Pleistocene in the southern segment of the Yishu fault zone, however, only the fault in eastern graben was active in the Holocene. This phenomenon is the tectonic response to the subduction of the Pacific and Philippine Sea Plate and collision between India and Asian Plate. The two late Quaternary active faults in the Yishu segment of TLFZ are deep faults and present different forms on the surface and in near surface according to studies of deep seismic reflection profile, seismic wave function and seismic relocation. Considering the tectonic structure of the southern segment of Yishu fault zone, the relationship between deep and shallow structures, and the impact of 1668 Tancheng earthquake(M=8(1/2)), the seismogenic ability of moderate-strong earthquake along the Yishui-Tangtou Fault(F3)can't be ignored.  相似文献   

10.
The relationship between the latest activity of active fault and seismic events is of the utmost importance. The Tan-lu fault zone in eastern China is a major fault zone, of which the active characteristics of the segments in Jiangsu, Shandong and Anhui has been the focus of research. This study takes the Dahongshan segment of the Tanlu Fault in Sihong County as the main research area. We carried out a detailed geological survey and excavated two trenches across the steep slope on the southwest side of the Dahongshan. Each trench shows fault clearly. Combining the comparative analysis of previous work, we identified and cataloged the late Quaternary deformation events and prehistoric earthquake relics, and analyzed the activity stages and behavior of this segment. Fault gonge observed in the trench profiles shows that multiple earthquake events occurred in the fault. The faulting dislocated the Neogene sandstone, black gravel layer and gray clay layer. Brown clay layer is not broken. According to the relations of dislocated stratums, corresponding 14C and OSL samples were collected and dated. The result indicates that the Dahongshan segment of the Tanlu Fault has experienced strong earthquakes since the late Quaternary. Thrust fault, normal fault and strike-slip fault are found in the trenches. The microscopic analysis of slices from fault shows that there are many stick-creep events taking place in the area during the late Quaternary. Comprehensive analysis shows that there have been many paleoearthquakes in this region since the late Quaternary, the recent active time is the late Pleistocene, and the most recent earthquake event occurred in(12~2.5ka BP). The neotectonic activity is relatively weak in the Anhui segment(south of the Huaihe River)of Tanlu fault zone. There are difficulties in the study of late Quaternary activity. For example, uneven distribution of the Quaternary, complex geological structure, larger man-made transformation of surface and so on. The progressive research may be able to promote the study on the activity of the Anhui segment of Tanlu fault zone.  相似文献   

11.
2014年8月3日,云南省昭通-鲁甸地区发生MS6.5级地震,造成了重大的人员伤亡和财产损失.鲁甸震区位于扬子块体的西缘,小江断裂带的东侧北东向的昭通-莲峰断裂带内.由于至今没有穿越该断裂带的人工源深地震测深剖面,而丽江-攀枝花-清镇650 km长深地震测深剖面距离鲁甸主震区不超过50 km,利用宽角地震资料的初至波震相,通过有限差分反演揭示该地区上地壳速度结构,可以为鲁甸震区的地震定位、地震孕育机制等提供深部速度模型.速度剖面显示：剖面结晶基底厚度平均为2 km左右;小江断裂带速度较低,东西两侧的速度较高;因此小江断裂带区域地壳强度比较低,加上断裂两侧的应变速率很高,所以小江断裂带和旁边的鲁甸-昭通断裂带,未来具有发生较大地震的可能,值得关注.  相似文献   

12.
郯庐断裂带中南段及邻区Pn波速度结构与各向异性   总被引：5，自引：1，他引：4       下载免费PDF全文
郯庐断裂带是一条纵贯我国大陆东部NNE走向的巨型深断裂,其中南段及邻区(115°E—122°E,29°N—38°N)跨越了华北断块区、扬子断块区和华南褶皱系三大一级构造单元,由于其重要性和复杂性,长期以来一直是地学家们研究的热点.本文从国际地震中心(ISC)、中国地震台网及区域地震台网的地震观测报告中精心挑选出6381个Pn震相数据,用Pn波时间项层析成像法反演得到了郯庐断裂带中南段及邻区上地幔顶部Pn波速度结构和各向异性.结果显示,研究区上地幔顶部具有显著的横向非均匀性,相对于7.95km·s-1的平均速度而言,Pn波速度值在7.68~8.24km·s-1范围内变化.Pn波速度分布在郯庐断裂带中段和南段具有分段性:沿中段及周边存在一NE向低速异常带,低速可能是由于岩石圈的减薄和软流圈的高温物质沿郯庐带上涌导致;沿南段表现为一NNE向弱高波速异常带,作为高低速的边界带清晰地勾勒出了华北与扬子这两个不同块体,该边界在江苏域向华北地块NW方向凹进.Pn波速度各向异性的强弱与速度分布存在一定的相关性.总体上,如鲁西隆起及以南等低速区、茅山断裂附近的高低速过渡带,其速度各向异性较为强烈;而在具有高速异常的苏北盆地、合肥盆地等稳定区域下方其各向异性较弱.本文通过Pn波震相基本未能探测到郯庐断裂带中段的方位各向异性,推测是上地幔顶部被"冻结"下来的各向异性痕迹被软流圈热物质上涌这一强烈构造运动削弱所导致.南段具有与断裂伸展方向近乎平行的快波速方向.Pn波速度横向变化和强震活动存在一定关联.强震主要发生在Pn波低速异常区或高低速过渡带上.郯城8.5级地震震中位于中段和南段高低速过渡带,该区域也是速度横向变化最大的地方,最容易集中应力和产生应力差.  相似文献   

13.
Study of historical earthquake is one of the important methods to understand the seismic activities and analyze the seismogenic faults. On the May 25th, 1568 AD, a destructive earthquake occurred to the northeast of the present-day city of Xi'an, Shaanxi Province. Because this earthquake happened shortly after the 1556 M8 earthquake and was regarded as an aftershock, it has received little attention in previous studies. Previous earthquake catalogue agreed in assigning a magnitude 6 3/4 to this earthquake but had different epicentral locations and seismic intensity, and the seismogenic structure remains ambiguous. Based on textual research of historical earthquake and field investigation, the Jingyang County, Gaoling County, and Xianning County, were the worst hit area by the earthquake, and the areas, including Yongle Town, Gaozhuang Town at southeastern Jingyang County to Gaoling County and its southeastern present-day Jijia and Zhangbu, should be the mesoseismal area of this earthquake. The epicenter intensity of this earthquake is Ⅸ+(9~10 degrees), and the magnitude is estimated to be 7. The isoseismal lines were drawn to exhibit the various intensities of the areas damaged during the event, with its major axis directed NWW. Intensities reached Ⅸ+ in the zone extending west-northwest parallel to the Weinan-Jingyang Fault. This fault, characterized by a normal fault that developed during the Cenozoic extensional history of the Weihe Basin, dipping to the north at an angle of 60°~80°, is one part of the southern boundary faults in Weihe graben. There are geomorphological and geological evidences of recent activity of the fault during (180±30)a BP to (1 600±30)a BP. At T1-T2 fluvial terraces on the north bank of Weihe River, the scarps were faulted during Ming Dynasty, and sandy soil liquefaction, dense structural tensional fissures and faulted strata are noted in stratigraphic profiles and trenches. Thus, we suggest that this fault can reliably be regarded as being active during Holocene, and re-name the earthquake as the Shaanxi Gaoling earthquake.  相似文献   

14.
龙陵-澜沧新生断裂带地震破裂分段与地震预测研究   总被引：5，自引：2，他引：5       下载免费PDF全文
龙陵 -澜沧新生断裂带的地震活动具频度高、强度大、周期短等特征 ,并以双震或震群型为主。断裂带由多条次级新生断层组成 ,呈斜列或共轭式展布 ,根据结构、规模、地震活动差异等因素把断裂带划分为 4个一级段、13个二级段 ,其中有 4个二级段又可划分出 8个三级段。历史上发生过大震、强震并有地震断层伴生的断层段为地震破裂单元 ;断裂带上晚第四纪有活动并有古地震事件 ,但无历史地震记载的地段为断层闭锁单元 ;次级断层之间的阶区或连接点为障碍体单元。从地震破裂特征分析 ,断裂带由破裂、闭锁、障碍体单元组成 ,根据地震、古地震、活断层、断层阶区的活动规律 ,断裂带可划分出 9个破裂单元、8个闭锁单元、10个障碍体单元。三者之间呈迁移、触发和转换能量的关系。根据这些关系和地震构造标志 ,对断裂带上未来可能发生大震、强震、中强震的地区分别作了预测。预测的危险区有 9个 ,其中大震区 1个 (永康 -永德地区 ) ,强震区 3个 (马站、石灰窑、酒房-勐混 ) ,中强震区 5个 (下顺江、里仁、大岗山、南明 -澜沧、勐遮  相似文献   

15.
The Oct.1,2014 M5.0 Yuexi earthquake occurred on the Daliang Shan fault zone where only several historical moderate earthquakes were recorded.Based on the waveform data from Sichuan regional seismic network,we calculated the focal mechanism solution and centroid depth of the M5.0 Yuexi earthquake by CAP (Cut and Paste) waveform inversion method,and preliminarily analyzed the seismogenic structure.We also calculated the apparent stress values of the M5.0 earthquake and other 14 ML≥4.0 events along the Shimian-Qiaojia fault segment of the eastern boundary of the Sichuan-Yunnan block.The result indicates that the parameters of the focal mechanism solution are with a strike of 256°,dip of 62°,and slip of 167° for the nodal plane Ⅰ,and strike of 352°,dip of 79°,and slip of 29° for the nodal plane Ⅱ.The azimuth of the P axis is 121° with dip angle of 11°,the azimuth of T axis is 217° with dip angle of 28°,and the centroid depth is about 11km,and moment magnitude is MW5.1.According to the focal mechanism solution and the fault geometry near the epicenter,we infer that the seismogenic fault is a branch fault,i.e.,the Puxiong Fault,along the central segment of the Daliang Shan fault zone.Thus,the nodal plane Ⅱ was interpreted as the coseismic rupture plane.The M5.0 Yuexi earthquake is a strike-slip faulting event with an oblique component.The above findings reveal the M5.0 Yuexi earthquake resulted from the left-lateral strike-slip faulting of the NNW Dalang Shan fault zone under the nearly horizontal principal compressive stress regime in an NWW-SEE direction.The apparent stress value of the Yuexi earthquake is 0.99MPa,higher than those of the ML ≥ 4.0 earthquakes along the eastern boundary of the Sichuan-Yunnan block since 2008 Wenchuan M8.0 earthquake,implying a relatively high stress level on the seismogenic area and greater potential for the moderate and strong earthquake occurrence.It may also reflect the current increasing stress level of the entire area along the eastern boundary,and therefore,posing the risk of strong earthquakes there.  相似文献   

16.
郯庐断裂带中段全新世活断层的特征滑动行为与特征地震   总被引：16，自引：0，他引：16  
晁洪太  李家灵 《内陆地震》1994,8(4):297-304
郯庐断裂带中段全新世活断层由３个独立的破裂段组成。从各破裂段的运动性质、位移分布看，断层的运动属特征地震型滑动。地震活动以强震活动为主，强震具有周期性原地重复发生的特点，且其强度基本相同；中强地震缺失或很少发生；ｂ值在高震级范围内具低ｂ值的非线性关系。这些特点正是特征地震的典型表现．根据郯庐断裂带中段活断层全新世以来的活动特点看，未来该区仍然以特征地震方式活动．按郯庐带的强震复发间隔和各段的最新一次活动时代推算，未来一段时期内新沂－宿迁段复发大震的可能性较大，安丘段次之，莒县－郯城段复发大震的可能性则很小。  相似文献   

17.
Complex geometrical structures on strike-slip faults would likely affect fault behavior such as strain accumulation and distribution, seismic rupture process, etc. The Xianshuihe Fault has been considered to be a Holocene active strike-slip fault with a high horizontal slip rate along the eastern margin of the Tibetan plateau. During the past 300 years, the Xianshuihe Fault produced 8 earthquakes with magnitude≥7 along the whole fault and showed strong activities of large earthquakes. Taking the Huiyuansi Basin as a structure boundary, the northwestern and southeastern segments of the Xianshuihe Fault show different characteristics. The northwestern segment, consisting of the Luhuo, Daofu and Qianning sections, shows a left-stepping en echelon pattern by simple fault strands. However, the southeastern segment(Huiyuansi-Kangding segment)has a complex structure and is divided into three sub-faults: the Yalahe, Selaha and Zheduotang Faults. To the south of Kangding County, the Moxi segment of the Xianshuihe Fault shows a simple structure. The previous studies suggest that the three sub-faults(the Yalahe, Selaha and Zheduotang Faults of the Huiyuansi-Kangding segment)unevenly distribute the strain of the northwestern segment of the Xianshuihe Fault. However, the disagreement of the new activity of the Yalahe Fault limits the understanding of the strain distribution model of the Huiyuansi-Kangding segment. Most scholars believed that the Yalahe Fault is a Holocene active fault. However, Zhang et al.(2017)used low-temperature thermochronology to study the cooling history of the Gongga rock mass, and suggested that the Yalahe Fault is now inactive and the latest activity of the Xianshuihe Fault has moved westward over the Selaha Fault. The Yalahe Fault is the only segment of the Xianshuihe Fault that lacks records of the strong historical earthquakes. Moreover, the Yalahe Fault is located in the alpine valley area, and the previous traffic conditions were very bad. Thus, the previous research on fault activity of the fault relied mainly on the interpretation of remote sensing, and the uncertainty was relatively large. Through remote sensing and field investigation, we found the geological and geomorphological evidence for Holocene activity of the Yalahe Fault. Moreover, we found a well-preserved seismic surface rupture zone with a length of about 10km near the Yariacuo and the co-seismic offsets of the earthquake are about 2.5~3.5m. In addition, we also advance the new active fault track of the Yalahe Fault to Yala Town near Kangding County. In Wangmu and Yala Town, we found the geological evidence for the latest fault activity that the Holocene alluvial fans were dislocated by the fault. These evidences suggest that the Yalahe Fault is a Holocene active fault, and has the seismogenic tectonic condition to produce a large earthquake, just like the Selaha and Zheduotang Faults. These also provide seismic geological evidence for the strain distribution model of the Kangding-Huiyuansi segment of the Xianshuihe Fault.  相似文献   

18.
1654年甘肃礼县8级地震发震断裂研究   总被引：1，自引：1，他引：0       下载免费PDF全文
1654年礼县8级地震的发震区地处新构造活动强烈的青藏高原东北缘,位于南北地震带中北段,发育多条活动断裂。礼县8级地震发生在黄土覆盖区,距今约370年,受自然侵蚀与人类活动的影响,其地表破裂带和次生灾害现在已经难以分辨。为此,文章收集整理了1970年以来的地震台网和流动台网观测资料,基于地震层析成像方法,经过联合反演计算,研究1654年礼县8级地震的发震构造。研究根据岷县—礼县—两当一线的小震活动分布,推测存在"岷县—礼县—两当断裂",可能是1654年礼县8级地震的发震断裂,但仍需野外地质工作的进一步研究。  相似文献   

19.
1837年甘肃岷县北6级地震考证与发震构造分析   总被引：8，自引：0，他引：8  
通过对1837年甘肃岷县北6级地震的历史资料考证、 发震构造的综合研究表明:在1837年地震中遭破坏最为严重的地区位于今岷县堡子乡武旗及临潭县陈旗一带(当时的洮州厅以东约15 km)。 由此确定1837年甘肃岷县地震极震区位于甘肃岷县-临潭-卓尼三县交界, 极震区烈度为Ⅷ度, 震中位于北纬34.7°, 东经103.9°, 误差在10 km以内。 该地区构造位于东昆仑断裂带和西秦岭北缘断裂带的应变传递和构造转换的中间过渡区, 其中临潭-宕昌断裂带活动特性差异明显, 只有部分地段表现出全新世活动特征, 地震极震区一带分布有不同程度的滑坡和基岩崩塌等。 综合分析认为, 临潭-宕昌断裂带的岷县-宕昌段的前缘分支断裂是甘肃岷县1837年6级地震的发震构造。  相似文献   

20.
Bayan Hara Block is one of the most representative active blocks resulting from the lateral extrusion of Tibet Plateau since the Cenozoic. Its southern and northern boundary faults are characterized by typical strike-slip shear deformation. Its eastern boundary is blocked by the Yangze block and its horizontal movement is transformed into the vertical movement of the Longmen Shan tectonic belt, leading to the uplift of the Longmen Shan Mountains and forming a grand geomorphic barrier on the eastern margin of the Tibet Plateau. A series of large earthquakes occurred along the boundary faults of the Bayan Hara Block in the past twenty years, which have attracted attention of many scholars. At present, the related studies of active tectonics on Bayan Hara Block are mainly concentrated on the boundary faults, such as Yushu-Ganzi-Xianshuihe Fault, East Kunlun Fault and Longmen Shan Fault. However, there are also some large faults inside the block, which not only have late Quaternary activity, but also have tectonic conditions to produce strong earthquake. These faults divide the Bayan Hara Block into some secondary blocks, and may play important roles in the kinematics and dynamics mechanism of the Bayan Hara Block, or even the eastern margin of the Tibet Plateau. The Dari Fault is one of the left-lateral strike-slip faults in the Bayan Hara Block. The Dari Fault starts at the eastern pass of the Kunlun Mountains, extends eastward through the south of Yalazela, Yeniugou and Keshoutan, the fault strike turns to NNE direction at Angcanggou, then turns to NE direction again at Moba town, Qinghai Province, and the fault ends near Nanmuda town, Sichuan Province, with a total length of more than 500km. The fault has been considered to be a late Quaternary active fault and the 1947 M73/4 Dari earthquake was produced by its middle segment. But studies on the late Quaternary activity of the Dari Fault are still weak. The previous research mainly focused on the investigation of the surface rupture and damages of the 1947 M73/4 Dari earthquake. However, there were different opinions about the scale of the M73/4 earthquake surface rupture zone. Dai Hua-guang(1983)thought that the surface rupture of the earthquake was about 150km long, but Qinghai Earthquake Agency(1984)believed that the length of surface rupture zone was only 58km. Based on interpretation of high-resolution images and field investigations, in this paper, we studied the late Quaternary activity of the Dari Fault and the surface rupture zone of the 1947 Dari earthquake. Late Quaternary activity in the central segment of the Dari Fault is particularly significant. A series of linear tectonic landforms, such as fault trough valley, fault scarps, fault springs and gully offsets, etc. are developed along the Dari Fault. And the surface rupture zone of the 1947 Dari earthquake is still relatively well preserved. We conducted a follow-up field investigation for the surface rupture zone of the 1947 Dari earthquake and found that the surface rupture related to the Dari earthquake starts at Longgen village in Moba town, and ends near the northwest of the Yilonggounao in Jianshe town, with a length of about 70km. The surface rupture is primarily characterized by scarps, compressional ridges, pull-apart basins, landslides, cleavage, and the coseismic offset is about 2~4m determined by a series of offset gullies. The surface rupture zone extends to the northwest of Yilonggounao and becomes ambiguous. It is mainly characterized by a series of linear fault springs along the surface rupture zone. Therefore, we suggest that the surface rupture zone of the 1947 Dari earthquake ends at the northwest of Yilonggounao. In summary, the central segment of the Dari Fault can be characterized by strong late Quaternary activity, and the surface rupture zone of the 1947 Dari earthquake is about 70km long.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号