共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
Wave radiation stress is the main driving force of wave-induced near-shore currents. It is directly related to the hydrodynamic characteristics of near-shore current whether the calculation of wave radiation stress is accurate or not. Irregular waves are more capable of reacting wave motion in the ocean compared to regular waves.Therefore, the calculation of the radiation stress under irregular waves will be more able to reflect the wave driving force in the actual near-shore current. Exact solution and approximate solution of the irregular wave radiation stress are derived in this paper and the two kinds of calculation methods are compared. On the basis of this, the experimental results are used to further verify the calculation of wave energy in the approximate calculation method. The results show that the approximate calculation method of irregular wave radiation stress has a good accuracy under the condition of narrow-band spectrum, which can save a lot of computing time, and thus improve the efficiency of calculation. However, the exact calculation method can more accurately reflect the fluctuation of radiation stress at each moment and each location. 相似文献
3.
Graham J.M. Copeland 《Coastal Engineering》1985,9(3):195-219
Numerical models of combined surface gravity wave refraction, diffraction and reflection can be solved conveniently in terms of the water surface displacement, η, and a vertically integrated, wave-induced, water particle velocity, Q. However, the normal formulation for the radiation stress components, expressed in terms of the wave energy, wave number and water depth, is correct only for linear progressive waves.This paper describes a method of calculating the radiation stress for a linear progressive wave plus an arbitrary reflected or back-scattered wave in terms of variables η and Q. The calculations are related to a finite-difference scheme. Correction factors are given which compensate for the errors introduced by the use of finite differentials in the calculation of certain elements of radiation stress.The theory upon which the analytical method is based is only exact for water of uniform depth. However, results are presented which show that the errors are not significant (typical error less than ± 2%) for bed slopes of less than 1:3. 相似文献
4.
Based on the time dependent mild slope equation including the effect of wave energy dissipation, an expression for the energy dissipation factor is derived in conjunction with the wave energy balance equation, and then a practical method for the simulation of wave height and wave set-up in nearshore regions is presented. The variation of the complex wave amplitude is numerically simulated by use of the parabolic mild slope equation including the effect of wave energy dissipation due to wave breaking. The components of wave radiation stress are calculated subsequently by new expressions for them according to the obtained complex wave amplitude, and then the depth-averaged equation is applied to the calculation of wave set-up due to wave breaking. Numerical results are in good agreement with experimental data, showing that the expression for the energy dissipation factor is reasonable and that the new method is effective for the simulation of wave set-up due to wave breaking in nearshore regions. 相似文献
5.
Boundary Collocation Method (BCM) based on Eigenfunction Expansion Method (EEM), a new numerical method for solving two-dimensional wave problems, is developed. To verify the method, wave problems on a series of beaches with different geometries are solved, and the errors of the method are analyzed. The calculation firmly confirms that the results will be more precise if we choose more rational points on the beach. The application of BCM, available for the problems with irregular domains and arbitrary boundary conditions, can effectively avoid complex calculation and programming. It can be widely used in ocean engineering. 相似文献
6.
《中国海洋工程》2015,(4)
Boundary Collocation Method(BCM) based on Eigenfunction Expansion Method(EEM), a new numerical method for solving two-dimensional wave problems, is developed. To verify the method, wave problems on a series of beaches with different geometries are solved, and the errors of the method are analyzed. The calculation firmly confirms that the results will be more precise if we choose more rational points on the beach. The application of BCM, available for the problems with irregular domains and arbitrary boundary conditions, can effectively avoid complex calculation and programming. It can be widely used in ocean engineering. 相似文献
7.
8.
The system with one floating rectangular body on the free surface and one submerged rectangular body has been applied to a wave energy conversion device in water of finite depth. The radiation problem by this device on a plane incident wave is solved by the use of an eigenfunction expansion method, and a new analytical expression for the radiation velocity potential is obtained. The wave excitation force is calculated via the known incident wave potential and the radiation potential with a theorem of Haskind employed. To verify the correctness of this method, an example is computed respectively through the bound element method and analytical method. Results show that two numerical methods. are in good agreement, which shows that the present method is applicable. In addition, the trends of hydrodynamic coefficients and wave force are analyzed under different conditions by use of the present analytical method. 相似文献
9.
10.
基于3D FEMDEM方法建立三维原型尺度数值模型,模拟波浪荷载作用下斜坡上护面块体内部的应力分布。波浪作用下结构物的水动力荷载采用微幅波理论模拟,护面块体之间的运动、碰撞接触以及块体内部的应力变化采用3D FEMDEM方法模拟。块体之间的接触力采用基于势函数的罚函数法计算,有限元的变形采用中心差分的显式方法求解。应用该数值模型与ANSYS软件程序对自重作用下混凝土扭王字块的内部应力分布特性进行了比较分析,验证了数值模型应力计算的可行性和计算精度。通过数值模拟计算给出了波浪作用下斜坡上护面块体之间的相对运动和块体内部的应力分布及应力历时曲线,探讨了块体内部应力变化特性。 相似文献
11.
12.
The effect of wave-induced radiation stress on storm surge during Typhoon Saomai (2006) 总被引：5，自引：1，他引：4
The effects of wave-induced radiation stress on storm surge were simulated during Typhoon Saomai using a wave-current coupled model based on ROMS (Regional Ocean Modeling System) ocean model and SWAN (Simulating Waves Nearshore) wave model.The results show that radiation stress can cause both set-up and set-down in the storm surge.Wave-induced set-up near the coast can be explained by decreasing significant wave heights as the waves propagate shoreward in an approximately uniform direction;wave-induced set-down far from the coast can be explained by the waves propagating in an approximately uniform direction with increasing significant wave heights.The shoreward radiation stress is the essential reason for the wave-induced set-up along the coast.The occurrence of set-down can be also explained by the divergence of the radiation stress.The maximum wave-induced set-up occurs on the right side of the Typhoon path,whereas the maximum wave induced set-down occurs on the left side. 相似文献
13.
I.A. Svendsen 《Coastal Engineering》1984,8(4):393-394
A theoretical model is developed for wave heights and set-up in a surf zone. In the time-averaged equations of energy and momentum the energy flux, radiation stress and energy dissipation are determined by simple approximations which include the effect of the surface roller in the breaker and the actual shape of the waves. To the first approximation the roller represents a volume of water moving with the wave speed. It significantly changes both energy flux and radiation stress of the surf zone waves. The equations of energy and momentum are solved simultaneously to give the wave height variation and the set-up. Comparison with measurements shows good agreement. Also the transitions immediately after breaking are analyzed and shown to be in accordance with the above-mentioned ideas and results. 相似文献
14.
I.A. Svendsen 《Coastal Engineering》1984,8(4):303-329
A theoretical model is developed for wave heights and set-up in a surf zone. In the time-averaged equations of energy and momentum the energy flux, radiation stress and energy dissipation are determined by simple approximations which include the effect of the surface roller in the breaker and the actual shape of the waves. To the first approximation the roller represents a volume of water moving with the wave speed. It significantly changes both energy flux and radiation stress of the surf zone waves. The equations of energy and momentum are solved simultaneously to give the wave height variation and the set-up. Comparison with measurements shows good agreement. Also the transitions immediately after breaking are analyzed and shown to be in accordance with the above-mentioned ideas and results. 相似文献
15.
Improvements on Mean Free Wave Surface Modeling 总被引：1，自引：0，他引：1
Some new results of the modeling of mean free surface of waves or wave set-up are presented. The stream funetion wave theory is applied to incident short waves. The limiting wave steepness is adopted as the wave breaker indcx in the calculation of wave breaking dissipation. The model is based on Roelvink (1993), but the numerical techniques used in the solution are based on the Weighted-Average Flux (WAF) method (Watson et al. , 1992), with Time-Operator-Split-ting (TOS) used for the treatment of the source terms. This method allows a small number of eomputational points to be used, and is particularly efficient in modeling wave set-up. The short wave (or incident primary wave) energy equation is solved by use of a traditional Lax-Wendroff technique. The present model is found to be satisfactory compared with the measurements conducted by Stive (1983). 相似文献
16.
为了研究波流共同荷载作用下开挖基槽附近海床动态响应和液化破坏情况,提出一个二维耦合计算模型,采用雷诺时均纳维-斯托克斯（RANS）方程描述波浪运动情况,通过设定侧边界条件实现稳定流场。海床部分通过求解Biot固结方程,得到波流荷载下海床中的应力和位移情况。将模型计算结果与水槽试验数据和解析解进行比较,验证了波流模型和海床模型的有效性。在此模型基础上,分析得到了开挖之后海床新的应力和固结状态。同时,通过参数分析得到了波流耦合情况下波浪形态的变化,以及海流对海床液化情况和孔压情况的影响。最后,通过线性回归计算得到最大液化深度与流速的拟合关系曲线。计算结果可用于判断基槽开挖后不规则海床的液化情况,对相关研究和实际工程具有一定参考意义。 相似文献
17.
周向变刚度环肋圆柱壳应力分析研究 总被引：1，自引：0，他引：1
采用大曲率梁理论和弹性基础梁带理论,建立潜艇特殊舱段结构的力学模型。利用能量法求出肋位处耐压船体壳板中面周向应力。建立环肋圆柱壳微分方程并根据边界条件求解,得到周向变刚度环肋圆柱壳应力计算方法。通过理论分析和模型试验验证了本计算方法。 相似文献
18.
19.
综合考虑多种变形因素的近岸规则波传播数学模型Ⅰ. 基本方程的导出 总被引：1，自引：0，他引：1
推广了Kirby的有环境水流影响的缓坡方程,得到了综合考虑环境水流(水流因子)、非线性弥散影响(非线性因子)、底摩擦波能损失(底摩擦因子)、非缓坡地形影响(地形因子)、折射、绕射、波浪破碎多种变形因素的波浪传播控制方程,并给出了非线性因子、地形因子、底摩擦因子、水流因子的确定方法。基于导出的方程做进一步推导,得到了波高和波向为变量的综合考虑多种变形因素的波浪传播基本方程,该方程有许多优点:1)其绕开了求解波势函数的困难,将椭圆型方程的边值问题化为初值问题;2)直接求解波高和波向;3)可采用有限差分法离散求解,对空间步长没有限制,适合大面积海区波场计算;4)综合考虑了多种波浪变形因素,方程更为合理,5)容易处理波浪破碎问题。 相似文献
20.
Numerical Simulation of Local Scour Around A Large Circular Cylinder Under Wave Action 总被引：1，自引：0，他引：1
A horizontal two- dimensional numerical model is developed for estimation of sediment transport and sea bed change around a large circular cylinder under wave action. The wave model is based on an elliptic mild slope equation. The wave-induced current by the gradient of radiation stress is considered and a depth integrated shallow water equation is applied to the calculation of the current. The mass transport velocity and the bed shear stress due to streaming are considered, which are important factors affecting the sediment transport around a structure due to waves, especially in reflective areas. Wave-current interaction is taken into account in the model for computing the bed shear stress. The model is implemented by a finite element method. The results of this model are compared with those from other methods and agree well with experimental data. 相似文献