首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 890 毫秒
1.
This study aims to present an evaluation and implementation of a high-resolution SWAN wind wave hindcast model forced by the CFSR wind fields in the west Mediterranean basin, taking into account the recent developments in wave modelling as the new source terms package ST6. For this purpose, the SWAN model was calibrated based on one-year wave observations of Azeffoune buoy (Algerian coast) and validated against eleven wave buoys measurements through the West Mediterranean basin. For the calibration process, we focused on the whitecapping dissipation coefficient Cds and on the exponential wind wave growth and whitecapping dissipation source terms. The statistical error analysis of the calibration results led to conclude that the SWAN model calibration corrected the underestimation of the significant wave height hindcasts in the default mode and improved its accuracy in the West Mediterranean basin. The exponential wind wave growth of Komen et al (1984) and the whitecapping dissipation source terms of Janssen (1991) with Cds = 1.0 have been thus recommended for the western Mediterranean basin. The comparison of the simulation results obtained using this calibrated parameters against eleven measurement buoys showed a high performance of the calibrated SWAN model with an average scatter index of 30% for the significant wave heights and 19% for the mean wave period. This calibrated SWAN model will constitute a practical wave hindcast model with high spatial resolution (˜3 km) and high accuracy in the Algerian basin, which will allow us to proceed to a finer mesh size using the SWAN nested grid system in this area.  相似文献   

2.
《Coastal Engineering》2005,52(2):177-195
An improved SWAN model using the Finite Element Method (FEM) was developed for wind waves simulations in both large-scale oceanic deep water regions and small-scale shallow water regions. The model employs a Taylor–Galerkin finite element technique for the discretization of the modeled area, which makes it flexible to represent bottom topography and irregular boundaries. The fractional step numerical scheme was adopted to split the wave action balance equation into three one-dimensional space equations, which can be solved efficiently by one-dimensional algorithms. The Flux-Corrected Transport method was also applied to circumvent the steep-gradients of the action density in the frequency space. The FEM code with unstructured grids improves the numerical schemes in the original SWAN to maintain computational efficiency at the operational stage. A simulation of wind wave activities for the monsoon and the 2000 Typhoon Bilis were performed using the FEM and SWAN models. The simulated results were compared with field observations in order to verify the suitability of the method.  相似文献   

3.
分析四象限非对称风场模型与叠加风场模型的优缺点,将模型结果与实测风速进行对比验证;利用上述两种风场模型分别驱动第三代海浪模式SWAN,对发生在南海海域的三场台风浪进行了数值模拟计算。结果显示:四象限非对称模型关于风速的计算值与实测值吻合度更高,尤其是当台风中心距离测站较近时;四象限非对称模型驱动SWAN模拟的台风浪精度优于叠加风场模型,适用于南海台风浪的数值模拟。  相似文献   

4.
The influences of the three types of reanalysis wind fields on the simulation of three typhoon waves occurred in 2015 in offshore China were numerically investigated. The typhoon wave model was based on the simulating waves nearshore model (SWAN), in which the wind fields for driving waves were derived from the European Centre for Medium-Range Weather Forecasts (ECMWF) Re-Analysis-Interim (ERA-interim), the National Centers for Environmental Prediction climate forecast system version 2 (CFSv2) and cross-calibrated multi-platform (CCMP) datasets. Firstly, the typhoon waves generated during the occurrence of typhoons Chan-hom (1509), Linfa (1510) and Nangka (1511) in 2015 were simulated by using the wave model driven by ERA-interim, CFSv2 and CCMP datasets. The numerical results were validated using buoy data and satellite observation data, and the simulation results under the three types of wind fields were in good agreement with the observed data. The numerical results showed that the CCMP wind data was the best in simulating waves overall, and the wind speeds pertaining to ERA-Interim and CCMP were notably smaller than those observed near the typhoon centre. To correct the accuracy of the wind fields, the Holland theoretical wind model was used to revise and optimize the wind speed pertaining to the CCMP near the typhoon centre. The results indicated that the CCMP wind-driven SWAN model could appropriately simulate the typhoon waves generated by three typhoons in offshore China, and the use of the CCMP/Holland blended wind field could effectively improve the accuracy of typhoon wave simulations.  相似文献   

5.
Wave dissipation characteristics in SWAN (Simulating Waves Nearshore) model are investigated through numerical experiments. It is found that neither the fully developed integral parameters of wind waves (significant wave height and peak frequency) nor the high frequency spectral tail can be well reproduced by the default wave dissipation source terms. A new spectral dissipation source term is proposed, which comprises saturation based dissipation above two times of peak frequency and improved whitecapping dissipation at lower frequency spectrum. The reciprocal wave age (u /c p ) is involved into the whitecapping model to adjust dissipation rate at different wind speed. The Phillips higher frequency saturation parameter in the saturation-based dissipation is no longer taken as a constant, but varies with wave age. Numerical validations demonstrate that both the wind wave generation process and higher frequency spectrum of wind waves can be well simulated by the new wave dissipation term.  相似文献   

6.
寒潮影响下江苏沿海风浪场数值模拟研究   总被引:2,自引:0,他引:2  
周春建  徐福敏 《海洋工程》2017,35(2):123-130
基于第三代浅水波浪数值预报模型SWAN,建立自西北太平洋嵌套至东中国海、江苏沿海的三重嵌套模型,对2010年12月12日至15日江苏沿海寒潮大风引起的风浪过程进行了数值模拟研究。利用西北太平洋和江苏沿海实测数据对模型进行了验证,结果表明SWAN嵌套模型能较好地模拟江苏沿海寒潮风浪场的时空分布。通过响水站实测数据对江苏沿海底摩擦系数进行了率定,研究表明选取Collins拖曳理论中摩擦因数C_f=0.001时,有效波高模拟误差相对较小。寒潮风浪场的特征分析表明,有效波高分布与风场分布基本一致,寒潮风浪在江苏沿海北部影响较为显著,辐射沙洲附近由于其特殊地形影响相对较小。  相似文献   

7.
With all the improvement in wave and hydrodynamics numerical models, the question rises in our mind that how the accuracy of the forcing functions and their input can affect the results. In this paper, a commonly used numerical third-generation wave model, SWAN is applied to predict waves in Lake Michigan. Wind data are analyzed to determine wind variation frequency over Lake Michigan. Wave predictions uncertainty due to wind local effects are compared during a period where wind has a fairly constant speed and direction over the northern and southern basins. The study shows that despite model calibration in Lake Michigan area, the model deficiency arises from ignoring wind effects in small scales. Wave prediction also emphasizes that small scale turbulence in meteorological forces can increase prediction errors by 38%. Wave frequency and coherence analysis show that both models can predict the wave variation time scale with the same accuracy. Insufficient number of meteorological stations can result in neglecting local wind effects and discrepancies in current predictions. The uncertainty of wave numerical models due to input uncertainties and model principals should be taken into account for design risk factors.  相似文献   

8.
西北太平洋夏季海浪数值模拟研究   总被引:1,自引:0,他引:1  
为了解第三代海浪模式SWAN在西北太平洋海浪模拟效果,利用2013年7月期间Jason-2卫星高度计观测资料,通过计算模拟值和观测值的绝对误差、均方根误差和进行逐日统计、分级统计、一次台风过程的统计,对FNL风场资料驱动SWAN模式的西北太平洋海浪数值模拟有效波高进行了检验。检验结果表明,模式对较小波高模拟效果较好,模拟波高与实测值误差在可接受的范围之内,可满足业务化预报的要求,但对较大波高的模拟存在一定的误差,且驱动风场的精细化水平直接影响模拟效果。  相似文献   

9.
太湖风浪场的计算与比较   总被引:1,自引:0,他引:1  
首先探讨了浅水风浪数值模型—SWAN模型应用于模拟内陆湖泊风浪生成和传播变形时的特点。该模型存在不能有效地模拟近固壁边界处风浪场的缺点,以能正确地模拟湖区的风浪场和节约计算时间为原则,确定了计算范围。对太湖进行了风场和风浪场的现场观测。分别利用规范公式和SWAN模型两种方法、根据观测和预报的风场计算了湖区的有效波高,并将计算结果和现场观测值进行了详细比较。结果表明基于观测的风场,利用两种方法所计算的太湖风浪场的精度基本相当;在根据观测的风场、利用SWAN模型计算内陆湖泊的风浪场时,需要精心选择恰当的风场;在根据预报的风场预报湖区风浪场时,SWAN模型的精度要高于规范公式的精度。  相似文献   

10.
A study of marine breezes and their impact on the wave field around Mallorca Island was carried out by numerical simulations with the spectral wave model SWAN and three different wind fields: WRF – Weather Research and Forecasting model, HIRLAM – High Resolution Limited Area model and ECMWF – European Center for Medium-range Weather Forecasts. The main characteristics of the modelled breeze circulation and its effects on the wave field are analyzed. The modified wave field under breeze conditions and the correlations with their variability and daily short life time period are studied and discussed by analyzing the spectral balance. The results show that the accuracy of a wave forecast will depend on the quality of the wind field and its ability to simulate the sea breeze induced waves. The study period covers the summers of 2009 and 2010. In addition, to assess the performance of SWAN forced with two different winds the numerically obtained significant wave heights (Hs) are collocated against the ENVISAT-ESA's Environmental Satellite measurements (GLOBWAVE data) of Hs around the Mallorca Island.  相似文献   

11.
为减少复杂地形对台风浪数值模拟的干扰,有效优化模拟精度和效果,充分发挥台风浪数值模式在防灾减灾中的作用,文章利用ERA-interim风场驱动模式,以1513号台风"苏迪罗"为例,采用2种方案对其形成的台风浪进行数值模拟,并对二者进行比较。其中,方案(1)为采用WW3模式,方案(2)为采用WW3模式和SWAN模式嵌套。研究结果表明:选取有效波高的模拟值和观测值,根据对散点分布的定性分析以及对相关系数、偏差和均方根误差的定量计算,采用方案(2)的模拟精度更高;通过绘制台风浪场分布图,采用方案(2)对有效波高的动态数值模拟更加明显和准确,尤其对于复杂地形海域的模拟效果更优。因此,在未来的海浪数值模拟中,可参照采用方案(2),即在大区域采用WW3模式,在复杂地形海域嵌套SWAN模式。  相似文献   

12.
获取高分辨率的风场数据和气压场数据是精确模拟台风浪的基础,采用经验公式构建台风风场和气压场对海浪模式进行驱动,无法反映台风影响下海气动力过程,难以提供高精度的风场、气压场数据。本文基于中尺度大气模式WRF(Weather Research and Forecasting model)和第三代海浪模式SWAN(Simulating WAves Nearshore model),构建了南中国海地区大气—海浪实时双向耦合模式,针对超强台风"威马逊"进行数值模拟。将数值模拟结果与现场观测结果及卫星高度计观测结果进行对比验证,验证结果表明,本文建立的WRF-SWAN耦合模式在对台风"威马逊"影响下的南中国海台风浪的模拟中展现出较高的模拟精度,揭示了台风风场分布和台风浪分布在空间上的"右偏性"不对称分布特征及其形成机制。基于WRF和SWAN建立的大气-海浪实时双向耦合模式能够准确模拟台风动力过程以及台风浪的时空分布特征,可以推广用于南中国海地区台风浪的模拟分析。  相似文献   

13.
WAVEWATCH和SWAN嵌套模拟台风浪场的结果分析   总被引:1,自引:0,他引:1  
利用WAVEWATCH和SWAN嵌套模拟2007年8月墨西哥湾飓风迪安的波浪场.将QSCAT/NCEP混合风场与台风模型风场合成为背景风场.修改WAVEWATCH和SWAN嵌套接口以使WAVEWATCH和SWAN2种海浪预报模式能够有效地嵌套运行.利用WAVEWATCH和SWAN嵌套模拟飓风迪安的波浪场,采用浮标资料检验模拟结果,以验证WAVEWATCH和SWAN模拟的准确性及修改后嵌套接口的可用性.结果表明,修改嵌套接口之后模式运行平稳,2种模式的结果与浮标及高度计观测数据均基本吻合.嵌套模拟结果好于单纯使用WAVEWATCH模拟的结果,体现了利用2种模式嵌套模拟台风浪场的科学性.  相似文献   

14.
Diffusion reduction in an arbitrary scale third generation wind wave model   总被引:1,自引:0,他引:1  
The numerical schemes for the geographic propagation of random, short-crested, wind-generated waves in third-generation wave models are either unconditionally stable or only conditionally stable. Having an unconditionally stable scheme gives greater freedom in choosing the time step (for given space steps). The third-generation wave model SWAN (“Simulated WAves Nearshore”, Booij et al., 1999) has been implemented with this type of scheme. This model uses a first order, upwind, implicit numerical scheme for geographic propagation. The scheme can be employed for both stationary (typically small scale) and nonstationary (i.e. time-stepping) computations. Though robust, this first order scheme is very diffusive. This degrades the accuracy of the model in a number of situations, including most model applications at larger scales. The authors reduce the diffusiveness of the model by replacing the existing numerical scheme with two alternative higher order schemes, a scheme that is intended for stationary, small-scale computations, and a scheme that is most appropriate for nonstationary computations. Examples representative of both large-scale and small-scale applications are presented. The alternative schemes are shown to be much less diffusive than the original scheme while retaining the implicit character of the particular SWAN set-up. The additional computational burden of the stationary alternative scheme is negligible, and the expense of the nonstationary alternative scheme is comparable to those used by other third generation wave models. To further accommodate large-scale applications of SWAN, the model is reformulated in terms of spherical coordinates rather than the original Cartesian coordinates. Thus the modified model can calculate wave energy propagation accurately and efficiently at any scale varying from laboratory dimensions (spatial scale O(10 m) with resolution O(0.1 m)), to near-shore coastal dimension (spatial scale O(10 km) with resolution O(100 m)) to oceanic dimensions (spatial scale O(10 000 km) with resolution O(100 km).  相似文献   

15.
夏波  张庆河  蒋昌波 《海洋与湖沼》2013,44(6):1452-1456
本文采用ADCIRC模型和SWAN模型, 建立了一个基于非结构化网格的波流耦合数值模式, 风浪计算和潮汐风暴潮计算均采用同一套三角网格, 对复杂岸线和建筑物布置均有较好的描述, 且避免了模型插值, 提高了计算效率和精度。利用该模型对渤海湾西南海域几次强风过程中的风浪和潮汐风暴潮进行了研究, 通过实测资料对该模型进行了验证, 结果表明该模式具有较高的精度, 能较好地描述风浪、潮汐风暴潮的传播演变及其相互作用, 可应用于风浪与潮汐风暴潮的模拟计算。  相似文献   

16.
WaveWatch的操作系统移植及其与SWAN嵌套接口的改进   总被引:8,自引:0,他引:8  
为使WaveWatch和SWAN两种海浪预报模式能够有效地嵌套运行,将WaveWatch模式从UNIX移植到Windows系统下运行,同时对SWAN模式与WaveWatch模式的嵌套接口格点座标读取精度进行修改,使其能够应用于不规则边界的曲线网格和小间距规则网格的嵌套;作为检验个例,使用WaveWatchIII与SWAN模式多重嵌套的方法在Windows系统下对长江口海浪场进行数值模拟实验,得到了理想的模拟结果。  相似文献   

17.
台风浪模拟预报中的风场比较研究   总被引:1,自引:0,他引:1  
在对模拟台风浪时海浪模式常用的经验模型风场和多重嵌套中尺度气象数值模式风场的结构和时间演变特征进行对比分析的基础上,分别采用这两种风场资料,应用最新版本的第三代海浪模式SWAN对Winnie(1997)引起的台风浪进行了模拟,将模拟的有效波高与TOPEX/POSEIDON和ERS-2卫星高度计资料作了详细的对比分析。结果表明,经验模型风场对实际台风风场的刻画存在诸多缺陷,这些缺陷对于台风浪的准确模拟产生了不可忽视的影响,采用模式风场试验的模拟效果优于采用模型风场的试验。论文提出了在运用海浪模式模拟台风浪时用数值模式模拟风场替代经验模型风场的必要性。  相似文献   

18.
基于CCMP(Cross Calibrated Multi-platform)卫星遥感海面风场数据,通过将WAVEWATCH和SWAN (Simulating WAves Nearshore)模型嵌套的方法,数值模拟了珠江口附近海域的风浪场。将总计10个月的数值模拟的有效波高、波周期和波向分别与相应的观测值进行了定量比较。结果说明,有效波高的平均绝对误差为15.4cm,分散系数SI为0.240,相关系数为0.925;波周期的平均绝对误差为1.9s,分散系数SI为0.433,相关系数为0.636;波向的平均绝对误差为23.9°。计算的波高和波向与观测结果的变化趋势相吻合。由于第三代海浪模式本身的缺陷,导致所计算的波周期偏小。总体说来,本文所采用的数值模式能较好地模拟珠江口附近海域的风浪场。另外,还设计了6个算例以探讨采用不同的计算方法和风场对计算结果精度的影响。结果表明使用本文的数值方法和高精度的CCMP风场确实可以提高计算结果的精度。  相似文献   

19.
In this paper the wind-wave variability in the tidal basins of the German Wadden Sea is modelled with combined numerical and neural-network (NN) methods. First, the wave propagation and transformation in the study area are modelled with the state-of-the-art third-generation spectral wave model SWAN. The ability of SWAN to accurately reproduce the phenomena of interest in nonstationary conditions governed by highly variable winds, water levels and currents is shown by comparisons of the modelled and measured mean wave parameters at four stations. The principal component analysis of the SWAN results is then used to reveal the dominating spatial patterns in the data and to reduce their dimensionality, thus enabling an efficient and relatively straightforward NN modelling of mean wave parameters in the whole study area. It is shown that the data produced with the approach developed in this work have statistical properties (discrete probability distributions of the mean wave parameters etc.) very close to the properties of the data obtained with SWAN, thus proving that this approach can be used as a reliable tool for wind wave simulation in coastal areas, complementary to (often computationally demanding) spectral wave models.  相似文献   

20.
采用SWAN模型和ADCIRC模型建立了风浪、潮汐和水流联合作用的耦合数值模式,并通过渤海湾西南岸实测资料对该模式进行了验证。利用该模式分析了近岸区水位和流场时空变化对风浪模拟结果的影响,计算结果表明水位变化对近岸区风浪模拟结果有显著影响,特别是中等大风过程高潮位时波高受水位影响的变化幅值可达0.5m以上,且水深越浅影响越大。但在岸滩平缓的近岸海域由于流速、流向的时空变化不太剧烈,流场作用和波浪辐射应力作用对波浪场的影响都基本可以忽略。在模拟近岸风浪过程时,应选用耦合模式。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号