首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
In September 2001, an extensive active-seismic investigation (Serapis experiment) was carried out in the Gulfs of Naples and Pozzuoli, with the aim of investigating and reconstructing the shallow crustal structure of the Campi Flegrei caldera, and possibly identifying its feeding system at depth. The present study provides a joint analysis of the very shallow seismic reflection data and tomographic images based on the Serapis dataset. This is achieved by reflection seismic sections obtained by the 3D data gathering and through refined P-velocity images of the shallowest layer of Pozzuoli Gulf (z < 1,000 m). From the refined Vp model, the overall picture of the velocity distribution confirms the presence of a complex arc-shaped anomaly that borders the bay offshore. The deeper part of the anomaly (beneath 700 m, with Vp > 3,500 m/s) correlates with units made up of agglomerate tuffs and interbedded lava, which form the southern edge of the caldera, which was probably formed following the two large ignimbritic eruptions that marked the evolutionary history of the area under study. The upper part of the anomaly that tends to split into two parallel arcs is correlated with dikes, volcanic mounds and hydrothermal alteration zones noted in previous shallow reflection seismic analyses. The depth of the transition between the upper and lower parts of the anomaly is characterized by an abrupt Vp increase on the one-dimensional (1D) profiles extracted from the 3D tomographic model and by the presence of a strong reflector located at about 0.6/0.7 s Two Way Time (TWT) on Common Mid Point gathers. The move-out velocity analysis and stack of the P–P and P–S reflections at the layer bottom allowed to estimate relatively high Vp/Vs values (3.7 ± 0.9). This hypothesis has been tested by a theoretical rock physical modeling of the Vp/Vs ratio as a function of porosity suggesting that the shallow layer is likely formed by incoherent, water saturated, volcanic and marine sediments that filled Pozzuoli Bay during the post-caldera activity.  相似文献   

2.
We propose a strategy for merging both active and passive data sets in linearized tomographic inversion. We illustrate this in the reconstruction of 3D images of a complex volcanic structure, the Campi Flegrei caldera, located in the vicinity of the city of Naples, southern Italy. The caldera is occasionally the site of significant unrests characterized by large ground uplifts and seismicity. The P and S velocity models of the caldera structure are obtained by a tomographic inversion based on travel times recorded during two distinct experiments. The first data set is composed of 606 earthquakes recorded in 1984 and the second set is composed of recordings for 1528 shots produced during the SERAPIS experiment in 2001. The tomographic inversion is performed using an improved method based on an accurate finite‐difference traveltime computation and a simultaneous inversion of both velocity models and earthquake locations. In order to determine the adequate inversion parameters and relative data weighting factors, we perform massive synthetic simulations allowing one to merge the two types of data optimally. The proper merging provides high resolution velocity models, which allow one to reliably retrieve velocity anomalies over a large part of the tomography area. The obtained images confirm the presence of a high P velocity ring in the southern part of the bay of Pozzuoli and extends its trace inland as compared to previous results. This annular anomaly represents the buried trace of the rim of the Campi Flegrei caldera. Its shape at 1.5 km depth is in good agreement with the location of hydrothermalized lava inferred by gravimetric data modelling. The Vp/Vs model confirms the presence of two characteristic features. At about 1 km depth a very high Vp/Vs anomaly is observed below the town of Pozzuoli and is interpreted as due to the presence of rocks that contain fluids in the liquid phase. A low Vp/Vs body extending at about 3–4 km depth below a large part of the caldera is interpreted as the top of formations that are enriched in gas under supercritical conditions.  相似文献   

3.
The Campi Flegrei caldera is a restless structure affected by general subsidence and ongoing resurgence of its central part. The persistent activity of the system and the explosive character of the volcanism lead to a very high volcanic hazard that, combined with intense urbanization, corresponds to a very high volcanic risk. One of the largest sources of uncertainty in volcanic hazard/risk assessment for Campi Flegrei is the spatial location of the future volcanic activity. This paper presents and discusses a long-term probability hazard map for vent opening in case of renewal of volcanism at the Campi Flegrei caldera, which shows the spatial conditional probability for the next vent opening, given that an eruption occurs. The map has been constructed by building a Bayesian inference scheme merging prior information and past data. The method allows both aleatory and epistemic uncertainties to be evaluated. The probability map of vent opening shows that two areas of relatively high probability are present within the active portion of the caldera, with a probability approximately doubled with respect to the rest of the caldera. The map has an immediate use in evaluating the areas of the caldera prone to the highest volcanic hazard. Furthermore, it represents an important ingredient in addressing the more general problem of quantitative volcanic hazards assessment at the Campi Flegrei caldera.  相似文献   

4.
The calibration of the elastic characteristics of deformed coals is essential for seismic inversion of such units, because the prediction of coal deformation is essential for both mining safety and methane production. Therefore, many samples of broken and mylonitic deformed coal were tested with ultrasonic waves in the laboratory. These samples came from four mining areas: the Huainan, Pingdingshan, Hebi and Jiaozuo coal mines, which present five different metamorphic ranks shown as cylinders striking across circular limits of steel. Under normal pressures and temperatures, ultrasonic P- and S-wave tests show that the velocities, quality factors, and elastic moduli of the deformed coals were greatly reduced compared with undeformed coals. Also, some correlation was found between the P- and S-wave velocities in the deformed coals. However, there is no evidence of linear correlations between velocity and density, velocity and quality factor, or the quality factors of P- and S-waves. Compared with the elastic characteristics of undeformed coals, such as P- and S-wave velocity ratios or Poisson’s ratio, those of deformed coals generally decrease and the P-wave quality factors are less than those of S-waves. Moreover, the analysis of the relationship between pore structure and elastic modulus shows a better correlation between the P- and S-wave velocities and effective porosity, pore volume and specific surface area. Also, there are similar relationships between the pore structure and the Young’s and shear moduli. However, there are no such correlations with other moduli. Correlations between these elastic moduli, pore structure, coal rank and density were not found for the various samples of deformed coals, which is consistent with only structural destruction occurring in the deformed coals with other physical properties remaining unchanged. The experimental results show that it is possible to predict the deformation of coals with multi-component seismic elastic inversion.  相似文献   

5.
The central Campanian Plain is dominated by the structural depression of Acerra whose origin is tectonic, but may have been enlarged and further depressed after the eruption of the Campanian Ignimbrite (42-25 ka). The deposits of the Campanian Ignimbrite are possibly the results of multiple eruptions with huge pyroclastic deposits that covered all the Campanian Plain.The more recent activity of Vesuvius, Campi Flegrei and Procida occurred on the borders of Acerra depression and resulted from a reactivation of regional faults after the Campanian Ignimbrite cycle. The activity of Vesuvius produced the building of a stratovolcano mostly by effusive and plinian explosive eruptions. The Campi Flegrei area, on the contrary, was dominated by the eruption of the Neapolitan Yellow Tuff at 12 ka that produced a caldera collapse of the Gulf of Pozzuoli. The caldera formation controlled the emplacement of the recent activity of Campi Flegrei and the new volcanoes were formed only within the caldera or along its rim.  相似文献   

6.
The ever-growing size of data sets for active and passive seismic imaging makes the availability of automatic procedures for rapid analysis more and more valuable. Such procedures are especially important for time-critical applications like emergency decisions or re-orienting of ongoing seismic surveys. In this paper a new, iterative scheme for 3D traveltime tomography is presented. The technique, based on a tool originally developed for earthquake data, uses cross-correlation to examine waveform similarity and to adjust arrival times on seismic sections. A preliminary set of reference arrival times is first corrected by the cross-correlation lag and then used to build an initial 3D tomographic velocity model through a standard inversion code; traveltimes calculated from this model are then taken as new reference arrivals and the process of pick adjustment is repeated. The result is a tomographic image, upgraded and refined at each iteration of the procedure. The test performed on the waveform data set recorded during the 2001 SERAPIS active seismic survey in the gulfs of Naples and Pozzuoli (Southern Italy) shows that the 3D iterative tomography scheme produces a velocity image of the structure of the Campi Flegrei caldera which is consistent with the results from previous studies, employing just a fraction of the time needed by a human analyst to identify first breaks. We believe that this technique can be effectively employed for rapid analysis of large data-sets within time-critical or time-dependent tasks and for automatic 4D tomographic investigations.  相似文献   

7.
Characterization of shallow structures was performed by using different approaches analysing both P- and S-wave seismic data with different resolution. The refraction tomography provided P and S velocity models of the first 80 m, while the reflection seismic processing gives a reasonable stacking velocity field until 300 m depth for both P- and S-wave data. So, we estimated the Vp/Vs ratio and an empirical relationship between the two velocities. We characterised the shallow layers using tomographic velocity models and the deeper layers using seismic images with different resolution. The seismic images were obtained by conventional CMP reflection seismic processing and by a novel multi-refractor imaging technique.  相似文献   

8.
The clay-sand mixture model of Xu and White is shown to simulate observed relationships between S-wave velocity (or transit time), porosity and clay content. In general, neither S-wave velocity nor S-wave transit time is a linear function of porosity and clay content. For practical purposes, clay content is approximated by shale volume in well-log applications. In principle, the model can predict S-wave velocity from lithology and any pair of P-wave velocity, porosity and shale volume. Although the predictions should be the same if all measurements are error free, comparison of predictions with laboratory and logging measurements show that predictions using P-wave velocity are the most reliable. The robust relationship between S- and P-wave velocities is due to the fact that both are similarly affected by porosity, clay content and lithology. Moreover, errors in the measured P-wave velocity are normally smaller than those in porosity and shale volume, both of which are subject to errors introduced by imperfect models and imperfect parameters when estimated from logs. Because the model evaluates the bulk and shear moduli of the dry rock frame by a combination of Kuster and Toksöz’ theory and differential effective medium theory, using pore aspect ratios to characterize the compliances of the sand and clay components, the relationship between P- and S-wave velocities is explicit and consistent. Consequently the model sidesteps problems and assumptions that arise from the lack of knowledge of these moduli when applying Gassmann's theory to this relationship, making it a very flexible tool for investigating how the vP-vs relationship is affected by lithology, porosity, clay content and water saturation. Numerical results from the model are confirmed by laboratory and logging data and demonstrate, for example, how the presence of gas has a more pronounced effect on P-wave velocity in shaly sands than in less compliant cleaner sandstones.  相似文献   

9.
The ground level in the Campi Flegrei caldera has never been stationary in the last 2,000 years. Historical data, and a nearly continuous tide-gauge record 20 years long, show that uplift and sinking have taken place on a variety of different time scales. In addition, the Campi Flegrei volcanic system appears to be sensitive to weak external forces such as tidal forces. We infer from these elements that the Campi Flegrei system is far from thermodynamic equilibrium, and suggest that its dynamics may be chaotic. We analyze the short-term variations of the ground level, and find that they can be described in a low-dimensional phase space. The dynamics of the Campi Flegrei system seems to have been phase-locked with tidal forces in the period following the 1970–1972 climax, and to have undergone a transition to chaos in some moment that preceded the presently continuing sinking phase.  相似文献   

10.
Seismic attributes, such as P- and S-wave velocity, Poisson’s ratio, and acoustic impedances, all generally can be used for distinguishing different rock types. The non-uniqueness can be largely reduced using Lamé impedances instead of acoustic impedances as additional constraints. We have followed this method to constitute a petrologic composition model of the upper crust in the Bohai Bay basin, China. We briefly review the seismic parameters used for discrimination of rock types and focus our attention on the sensitivity of different combinations of parameters to determine the composition of materials. Corrections for pressure and temperature are performed in order to compare elastic wave velocities and densities measured at room temperature and surface pressure in laboratory with those for representative rock parameters. In a second step, we find the rock classes in the tested area by contrasting known data to laboratory measurements on a variety of rock samples extracted in the area. The basic field data are P-wave velocity values collected along a seismic profile conducted in the Bozhong Depression. The different rock types belonging to a particular rock class are finally constrained by the seismic velocities, Poisson’s ratio, density, acoustic impedance, and Lamé impedance related to the topmost 10 km of the Bohai Bay crust.  相似文献   

11.
致密砂岩气藏具有裂缝发育和有效应力高的特征,研究不同有效压力下孔、裂隙介质地震波传播特征,有利于地震解释与地下储层的识别.但是前人的研究较少考虑岩石内部微观孔隙结构特征与孔隙、裂隙间流体流动的关系.本文首先通过选取四川盆地典型致密砂岩岩样,在不同有效压力下对岩石样本进行超声波实验测量.然后基于实验测得的纵、横波速度进行裂隙参数反演,得到不同有效压力下致密砂岩样本的裂隙孔隙度.再将裂隙孔隙度和样本岩石物理参数代入双重孔隙介质模型,模拟得到不同有效压力下饱水致密砂岩样本纵横波速度频散和衰减的变化规律.结果表明模型预测的速度频散曲线与纵波速度实验测量结果能够较好的吻合.最后统计分析了致密砂岩裂隙参数,得到了致密砂岩储层裂隙参数随有效压力及孔隙度变化特征.依据实际岩石物理参数建立模型,其裂隙参数三维拟合结果能够较好描述致密砂岩裂隙结构与孔隙度、应力的关联,可为实际地震勘探中预测储层裂缝性质提供基础依据.  相似文献   

12.
Digital marine seismic reflection data acquired in 1973 in the Bay of Pozzuoli, and recently reprocessed, were used to study the volcanological evolution of the marine sector of Campi Flegrei Caldera during the last 37 ka. In order to gain more information, interpretation also involved estimation of the "pseudo-velocity" and the "pseudo-density" from the resistivity logs of two onshore deep exploration wells. The main results are: (1) discovery of ancient pre-18 ka and post-37 ka submarine and mainly effusive volcanic activity, along coeval emission centers located at the edges of Campi Flegrei Caldera; (2) confirmation that the caldera collapse in the marine sector of Campi Flegrei seems strongly controlled by regional NE–SW and NW–SE structural discontinuities; (3) the finding of at least two episodes of collapse in the bay; and (4) identification of a post-18 ka volcanic deflation phase that has caused about 150–200 m of subsidence in the central sector of the Bay of Pozzuoli in the last 18 ka.Editorial responsibilty: T. Druitt  相似文献   

13.
Cracks play a very important role in many geotechnical issues and in a number of processes in the Earth’s crust. Elastic waves can be used as a remote sensing tool for determining crack density. The effect of varying crack density in crystalline rock on the P- and S-wave velocity and dynamic elastic properties under confining pressure has been quantified. The evolution of P- and S-wave velocity were monitored as a suite of dry Westerly granite samples were taken to 60, 70, 80 and 90 % of the unconfined uniaxial strength of the sample. The damaged samples were then subjected to hydrostatic confining pressure from 2 MPa to 200 MPa to quantify the effect of varying crack density on the P- and S-wave velocity and elastic properties under confining pressure. The opening and propagation of microcracks predominantly parallel to the loading direction during uniaxial loading caused a 0.5 and 6.3 % decrease in the P- and S-wave velocity, respectively. During hydrostatic loading, microcracks are closed at 130 MPa confining pressure. At lower pressures the amount of crack damage in the samples has a small but measureable effect. We observed a systematic 6 and 4 % reduction in P- and S-wave velocity, respectively, due to an increase in the fracture density at 2 MPa confining pressure. The overall reduction in the P- and S-wave velocity decreased to 2 and 1 %, respectively, at 50 MPa. The elastic wave velocities of samples that have a greater amount of microcrack damage are more sensitive to pressure. Effective medium modelling was used to invert elastic wave velocities and infer crack density evolution. Comparing the crack density results with experimental data on Westerly granite samples shows that the effective medium modelling used gave interpretable and reasonable results. Changes in crack density can be interpreted as closure or opening of cracks and crack growth.  相似文献   

14.
水饱和裂纹对地壳岩样中地震波速及各向异性的影响   总被引：11，自引：3，他引：8       下载免费PDF全文
选择４种地壳岩石样品,经干燥或水饱和处理后在不同围压条件下测量了在其中传播的纵、横波的速度及其各向异性．在大气压条件下低孔隙度(＜１％岩样中,水饱和样品中的纵波速度明显地比干燥样品中的高,但横波速度的差别不大．因为在低孔隙度岩样中纵波速度对孔隙流体的反应比横波速度敏感,可以用泊松比的变化来反映随着围压的增加晶粒间流体对弹性波传播特性的影响．根据实验数据,按Ｏ’Ｃｏｎｎｅｌｌ模型分别计算了干燥和水饱和岩样中的裂纹密度,与通过实测体应变曲线得到的裂纹孔隙度十分吻合．利用横波的速度和偏振特性可以推断岩样中定向排列微裂纹的空间取向情况．研究表明,同时测量在岩样中传播的纵、横波的速度,通过Ｖｐ／Ｖｓ比值可以给出有关颗粒边界流体的证据,也可以估计岩样中的裂纹密度．  相似文献   

15.
The record of felt earthquakes around Naples Bay in southern Italy is probably complete since the mid-15th century. According to this record, intense earthquake swarms originating beneath Campi Flegrei, an explosive caldera located along the north coast of Naples Bay, have occurred only twice: (1) before the only historical eruption in Campi Flegrei in 1538; and (2) from mid-1983 to December 1984. Earthquake activity during the earlier period, which began at least a few years, and possibly as many as 30 years, before the 1538 eruption, damaged many buildings in the city of Pozzuoli, located near the center of Campi Flegrei. Minor seismic activity, which consisted of only a few felt earthquakes, occurred from 1970 to 1971. The second period of intense earthquake swarms lasted from mid-1983 to 1984, again damaging many buildings in Pozzuoli. Two periods of uplift along the shoreline within Campi Flegrei have also been noted since the mid-15th century: (1) during the few decades before the 1538 eruption; and (2) as two distinct episodes since 1968. Uplift of a few meters probably occurred a few decades before the 1538 eruption; uplift of as much as 3.0 m has occurred in Pozzuoli since 1968.These similarities strongly suggest that, for the first time in 440 years, the same process that caused intense local earthquake swarms and uplift in the early 1500's and led to an eruption in 1538, has again occurred beneath Campi Flegrei. Though no major seismicity or uplift has occurred since December 1984, because of the large amount of extensional strain accumulated during the past two decades, if a third episode of seismicity and rapid uplift occurs, it may lead to an eruption within several months after the resumption of activity.  相似文献   

16.
Shear-wave velocity is a key parameter for calibrating monitoring time-lapse 4D seismic data during CO2-EOR (Enhanced Oil Recovery) and CO2 sequestration. However, actual S-wave velocity data are lacking, especially in 4D data for CO2 sequestration because wells are closed after the CO2 injection and seismic monitoring is continued but no well log data are acquired. When CO2 is injected into a reservoir, the pressure and saturation of the reservoirs change as well as the elastic parameters of the reservoir rocks. We propose a method to predict the S-wave velocity in reservoirs at different pressures and porosities based on the Hertz–Mindlin and Gassmann equations. Because the coordination number is unknown in the Hertz–Mindlin equation, we propose a new method to predict it. Thus, we use data at different CO2 injection stages in the Gao89 well block, Shengli Oilfield. First, the sand and mud beds are separated based on the structural characteristics of the thin sand beds and then the S-wave velocity as a function of reservoir pressure and porosity is calculated. Finally, synthetic seismic seismograms are generated based on the predicted P- and S-wave velocities at different stages of CO2 injection.  相似文献   

17.
Structural interpretations of negative gravity anomalies at Campi Flegrei and Campania are reviewed. The interpretations are not uniquely determined, as different models correspond to equally good anomaly fits.These models are examined using a new method based on the interpretation of the apparent density map computed from the gravity anomaly map.As regards the Campi Flegrei anomaly, a funnel-shaped caldera 3D model is readily obtained. This is more appropriate than previous interpretations, as not only anomaly but also apparent densities are fitted.As about the regional structures, the used approach suggests that the more pertinent model is a large magmatic intrusion, 9 to 14 km deep.A final scheme is proposed linking this intrusion to the funnel-shaped caldera as the main regional reservoir.  相似文献   

18.
This paper part one is set out to lay primary observations of experimental compaction measurements to form the basis for rock physics modelling in paper part two. P- and S-wave velocities and corresponding petrophysical (porosity and density) properties of seven unconsolidated natural sands with different mineralogical compositions and textures are reported. The samples were compacted in a uniaxial strain configuration from 0.5 up to 30 MPa effective stresses. Each sand sample was subjected to three loading cycles to study the influence of stress reduction on acoustic velocities and rock physical properties with the key focus on simulating a complex burial history with periods of uplift. Results show significant differences in rock physical properties between normal compaction and overconsolidation (unloaded and reloaded). The differences observed for total porosity, density, and P- and S-wave velocities are attributed to irrecoverable permanent deformation. Microtextural differences affect petrophysical, acoustic, elastic and mechanical properties, mostly during normal consolidation but are less significant during unloading and reloading. Different pre-consolidation stress magnitudes, stress conditions (isotropic or uniaxial) and mineral compositions do not significantly affect the change in porosity and velocities during unloading as a similar steep velocity–porosity gradient is observed. The magnitude of change in the total porosity is low compared to the associated change in P- and S-wave velocities during stress release. This can be explained by the different sensitivity of the porosity and acoustic properties (velocities) to the change in stress. Stress reduction during unloading yields maximum changes in the total porosity, P- and S-wave velocities of 5%, 25%, and 50%, respectively. These proportions constitute the basis for the following empirical (approximation) correlations: Δϕ ∼ ±5 ΔVP and ΔVP ∼ ±2ΔVS. The patterns observed in the experiments are similar to well log data from the Barents Sea. Applications to rock physics modelling and reservoir monitoring are reported in a companion paper.  相似文献   

19.
板岩作为一种浅变质岩在我国有着广泛的分布,对其地震波速度的研究将有助于对这类过渡性岩石的有效区分,对于浅层地壳的各向异性研究也具有重要意义.本文对采自云南丙中洛地区的板岩样品进行了地震波速度的室内实验研究,其中部分实验是在加拿大Dalhousie High Pressure Laboratory完成.实验获得了板岩在围压10~600 MPa条件下、不同构造主方向（X,Y和Z）上的地震波速度,在围压600 MPa时,X、Y、Z三个方向的P波速度分别为6.58、6.46、5.91 km/s,平均速度为6.30 km/s,S波平均速度约为3.62 km/s,VP/VS=1.74;并初步分析了板岩地震波速度、横波分裂及其波速各向异性随着围压的变化规律,发现所测量的板岩在较低围压（<150 MPa）时波速的各向异性随围压升高而迅速减小,主要是由于其内部微裂隙的定向排列引起的,而随着围压的继续增加（>150 MPa时）微裂隙基本闭合,黑云母、阳起石等片状矿物的定向排列成为其地震波各向异性的主导诱因,此时（围压为600 MPa）VP、VS的各向异性分别稳定在13%、16%左右.本研究所获取的基础实验数据及所探讨的板岩地震波性质将为确定地壳上部显微裂隙的优选定向、浅层地壳的各向异性分析、地球物理模型条件约束等提供基础.  相似文献   

20.
应用三分量地震数据反演煤系地层孔隙含水量   总被引：6，自引：4，他引：2       下载免费PDF全文
芦俊  王赟  赵伟 《地球物理学报》2010,53(7):1734-1740
地层孔隙水含量的计算主要受地层孔隙度与孔隙含水饱和度的影响.通过实验室煤层及其顶底板岩芯物理测试与孔隙度测量,可以获得煤系地层岩芯的孔隙度与岩芯纵、横波速度的经验公式;结合三分量地震勘探获得的纵波与横波速度,能够计算出煤系地层的孔隙度;含水饱和度的计算通过实验室岩电参数测试和阿尔奇公式可以计算得到.结合淮南某矿区三维三分量地震勘探和地球物理测井及岩样的岩电试验,实现了三维空间煤系地层孔隙含水体积百分比的精确计算.该预测方法与传统的、钻孔控制的地下水评价方法相比可以提供相对精细的、三维空间的、定量化的煤系地层孔隙相对含水量,对煤炭与煤层气资源开采中所涉及的地下水分布规律预测有一定的参考意义.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号