共查询到20条相似文献，搜索用时 546 毫秒
1.
台湾岛以南海域(台南滨海)弧—陆碰撞带位于欧亚板块、菲律宾海板块和南海的结合部位,是新近纪弧—陆碰撞研究的理想场所。本文通过对南海973航次在该区域的多道地震剖面的解释,认为台南滨海弧—陆碰撞带增生的火山—沉积楔由恒春海脊和高屏斜坡两部分组成,前者是菲律宾海板块的增生楔,后者是欧亚板块的增生楔,在增生楔体和火山弧之间是作为弧前盆地的北吕宋海槽。自中新世中期以来,南海洋壳开始沿着马尼拉海沟向菲律宾海板块俯冲,形成活动大陆边缘的增生部分——恒春海脊;与此同时菲律宾海板块开始向北西方向移动,前缘的吕宋岛弧距今6.5Ma以来朝着亚洲陆缘斜向汇聚,形成了被动大陆边缘的增生部分——高屏斜坡。由于菲律宾海板块和欧亚板块之间的斜向汇聚,弧—陆碰撞具有穿时性,造山作用首先发生在台湾岛的北部,然后向南部及台南滨海发展。 相似文献
2.
E. I. Prendergast 《Australian Journal of Earth Sciences》2013,60(4):481-501
The southeastern Lachlan Fold Belt at Batemans Bay on the New South Wales south coast is an accretionary complex with a prolonged deformation history. Early features include synsedimentary folds, mélange, disaggregated bedding and faults. Fabrics within the clast-in-matrix mélange and mudstone match those found in cores from the lower slopes of modern accretionary prisms. At the toe of the accretionary prism, the contact between the craton-derived Adaminaby Group and ocean floor deposits of the Wagonga Group is conformable. As subduction continued, the early structures were overprinted by (D1) deformation that produced meridional north – south-trending, tight to isoclinal folds (F1) and associated axial-plane cleavage (S1). This west-dipping subduction occurred in the Late Ordovician/Early Silurian but probably began much earlier. A younger regional deformation (D2) resulted in north – south-trending, open to tight folds (F2), slightly oblique to F1, and an axial-surface cleavage (S2). 相似文献
3.
《China Geology》2022,5(3):457-474
The A-type granites with highly positive εNd(t) values in the West Junggar, Central Asian Orogenic Belt (CAOB), have long been perceived as a group formed under the same tectonic and geodynamic setting, magmatic sourceq and petrogenetic model. Geological evidence shows that these granites occurred at two different tectonic units related to the southeastern subduction of Junggar oceanic plate: the Hongshan and Karamay granites emplaced in the southeast of West Junggar in the Baogutu continental arc; whereas the Akebasitao and Miaoergou granites formed in the accretionary prism. Here the authors present new bulk-rock geochemistry and Sr-Nd isotopes, zircon U-Pb ages and Hf-O isotopes data on these granites. The granites in the Baogutu continental arc and accretionary prism contain similar zircon εHf(t) values (+10.9 to +16.2) and bulk-rock geochemical characteristics (high SiO2 and K2O contents, enriched LILEs (except Sr), depleted Sr, Ta and Ti, and negative anomalies in Ce and Eu). The Hongshan and Karamay granites in the Baogutu continental arc have older zircon U-Pb ages (315–305 Ma) and moderate 18O enrichments (δ18Ozircon=+6.41‰–+7.96‰); whereas the Akebasitao and Miaoergou granites in the accretionary prism have younger zircon U-Pb ages (305–301 Ma) with higher 18O enrichments (δ18Ozircon=+8.72‰–+9.89‰). The authors deduce that the elevated 18O enrichments of the Akebasitao and Miaoergou granites were probably inherited from low-temperature altered oceanic crusts. The Akebasitao and Miaoergou granites were originated from partial melting of low-temperature altered oceanic crusts with juvenile oceanic sediments below the accretionary prism. The Hongshan and Karamay granites were mainly derived from partial melting of basaltic juvenile lower crust with mixtures of potentially chemical weathered ancient crustal residues and mantle basaltic melt (induced by hot intruding mantle basaltic magma at the bottom of the Baogutu continental arc). On the other hand, the Miaoergou charnockite might be sourced from a deeper partial melting reservoir under the accretionary prism, consisting of the low-temperature altered oceanic crust, juvenile oceanic sediments, and mantle basaltic melt. These granites could be related to the asthenosphere’s counterflow and upwelling, caused by the break-off and delamination of the subducted oceanic plate beneath the accretionary prism Baogutu continental arc in a post-collisional tectonic setting.©2022 China Geology Editorial Office. 相似文献
4.
In the Rhoscolyn area of Anglesey, the late Precambrian interbedded psammites and pelites of the Monian Supergroup are folded into a kilometre‐scale antiform, plunging about 25°NE and with an axial surface dipping about 40°NW. Numerous folds of up to a few tens of metres in wavelength are present on both limbs of this antiform. These smaller‐scale folds also plunge about 25°NE but clearly belong to two separate episodes of folding, and it has become a matter of longstanding controversy as to whether the larger antiform belongs to the first or second of these episodes. Close examination of the cleavage/bedding asymmetries from all the lithologies, however, shows that the large antiform is a second‐generation structure, and that on the gently dipping northwest limb, the sense of cleavage/bedding asymmetry of the earlier cleavage in the psammitic units has been almost uniformly and homogeneously reversed (so that it appears to be axial planar to the antiform), while in the pelitic units the sense of cleavage/bedding asymmetry of the earlier cleavage has been preserved. Many of the small‐scale complexities of the observed cleavage/bedding relationships may be explained by appealing to differences in the timing of the formation of buckling instabilities relative to this reorientation of the early cleavage in the psammites during the second deformation. A first‐order analysis of the finite strains from around the large‐scale antiform shows that the orientation of the first cleavage prior to the second deformation was steeply dipping to the southeast. The second deformation correlates with the southeast‐verging Caledonian deformation affecting the Monian and Ordovician units elsewhere in northwest Anglesey, while the northwest‐verging first deformation event, which is not present in the Ordovician rocks, must have occurred before they were deposited. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
5.
台湾造山带是中新世晚期以来相邻菲律宾海板块往北西方向移动,导致北吕宋岛弧系统及弧前增生楔与欧亚大陆边缘斜碰撞形成的。目前该造山带仍在活动,虽然规模很小,但形成了多数大型碰撞造山带中的所有构造单元,是研究年轻造山系统的理想野外实验室,为理解西太平洋弧-陆碰撞过程和边缘海演化提供了一个独特的窗口。本文总结了二十一世纪以来对台湾造山带的诸多研究进展,讨论了其构造单元划分及演化过程。我们将台湾造山带重新划分为6个构造单元,由西至东分依次为:(1)西部前陆盆地;(2)中央山脉褶皱逆冲带;(3)太鲁阁带;(4)玉里-利吉蛇绿混杂岩带;(5)纵谷磨拉石盆地;(6)海岸山脉岛弧系统。其中,西部前陆盆地为6.5Ma以来伴随台湾造山带的隆升剥蚀形成沉积盆地。中央山脉褶皱逆冲带为新生代(57~5.3Ma)欧亚大陆东缘伸展盆地沉积物由于弧-陆碰撞受褶皱、逆冲及变质作用改造形成的。太鲁阁带是造山带中的古老陆块,主要记录中生代古太平洋俯冲在欧亚大陆活动边缘形成的岩浆、沉积和变质岩作用。玉里-利吉蛇绿混杂岩带和海岸山脉岛弧系统分别为中新世中期(~18Ma)以来南中国海板块向菲律宾海板块之下俯冲形成的岛弧和弧前增生楔,其中玉里混杂岩中有典型低温高压变质作用记录,变质年龄为11~9Ma;岛弧火山作用的主要时限为9.2~4.2Ma。纵谷磨拉石盆地记录1.1Ma以来的山间盆地沉积。台湾造山带的构造演化可划分为4个阶段:(a)古太平洋板块俯冲与欧亚大陆边缘增生阶段(200~60Ma);(b)欧亚大陆东缘伸展和南中国海扩张阶段(60~18Ma);(c)南中国海俯冲阶段(18~4Ma);(d)弧-陆碰撞阶段(<6Ma)。台湾弧-陆碰撞造山带是一个特殊案例,其弧-陆碰撞并不伴随着弧-陆之间的洋盆消亡,而是由于北吕宋岛弧及弧前增生楔伴随菲律宾海板块运动向西北方走滑,仰冲到欧亚大陆边缘,形成现今的台湾造山带。 相似文献
6.
《Applied Geochemistry》2004,19(5):695-707
Taiwan is located at the collision boundary between the Philippine Sea Plate and the Asian Continental Plate and is one of the most active orogenic belts in the world. Fluids sampled from 9 sub-aerial mud volcanoes distributed along two major geological structures in southwestern Taiwan, the Chishan fault and the Gutingkeng anticline, were analyzed to evaluate possible sources of water and the degree of fluid-sediment interaction at depth in an accretionary prism. Overall, the Taiwanese mud volcano fluids are characterized by high Cl contents, up to 347 mM, suggesting a marine origin from actively de-watering sedimentary pore waters along major structures on land. The fluids obtained from the Gutingkeng anticline, as well as from the Coastal Plain area, show high Cl, Na, K, Ca, Mg and NH4, but low SO4 and B concentrations. In contrast, the Chishan fault fluids are much less saline (1/4 seawater value), but show much heavier O isotope compositions (δ18O=5.1–6.5 ‰). A simplified scenario of mixing between sedimentary pore fluids and waters affected by clay dehydration released at depth can explain several crucial observations including heavy O isotopes, radiogenic Sr contents (87Sr/86Sr=0.71136–0.71283), and relatively low salinities in the Chishan fluids. Gases isolated from the mud volcanoes are predominantly CH4 and CO2, where the CH4–C isotopic compositions show a thermogenic component of δ13C=−38 ‰. These results demonstrate that active mud volcano de-watering in Taiwan is a direct product of intense sediment accretion and plate collision in the region. 相似文献
7.
As a result of oblique collision, the Taiwan orogen propagates southward. The Hengchun peninsula in the southern tip of the Taiwan Central Range, preserving the youngest, the least deformed and the most complete accretionary prism sequences, allows therefore better understanding of the tectonic evolution of Taiwan orogen. On the Hengchun peninsula, four main stages of paleostress can be recognized by the analysis of brittle tectonics. After recording the first two stages of paleostress, rocks of the Hengchun peninsula (the Hengchun block) have undergone both tilting and counterclockwise rotation of about 90°. The structural boundaries of this rotated Hengchun block are: the Kenting Mélange zone in the southwest, the Fongkang Fault in the north, and a submarine backthrust in the east. The angle of this rotation is principally calculated by the paleomagnetic analysis data and a physical model experiment. Through a systematic back-tilting and back-rotating restoration, the original orientations of the four paleostress stages of Hengchun peninsula are recognized. They are, from the ancient to the recent, a NW–SE extension, a combination of NW–SE transtension and NE–SW transpression, a NE–SW compression, and finally a combination of NE–SW transtension and NW–SE transpression. This result can be explained by a phenomenon of stress axes permutation, instead of a complex polyphase tectonism. This stress axes permutation is caused by the horizontal compression increase accompanying the propagation of the accretionary prism. Combining the tectonic and paleomagnetic data with paleocurrent and stratigraphic data enables us to reconstruct the tectonic evolution of the Hengchun peninsula. This reconstruction corresponds to the deformation history of a continental margin basin, from its opening to its intense deformation in the accretionary prism. 相似文献
8.
The Hastings Block is a weakly cleaved and complexly folded and faulted terrain made up of Devonian, Carboniferous and Permian sedimentary and volcanic rocks. The map pattern of bedding suggests a major boundary exists that divides the Hastings Block into northern and southern parts. Bedding north of this boundary defines an upright box-like Parrabel Anticline that plunges gently northwest. Four cleavage/fold populations are recognised namely: E–W-striking, steeply dipping cleavage S1 that is axial surface to gently to moderately E- or W-plunging; F1 folds that were re-oriented during the formation of the Parrabel Anticline with less common N–S-trending, steeply dipping cleavage S2, axial surface to gently to moderately N-plunging F2 folds; poorly developed NW–SE-striking, steeply dipping cleavage S3 axial surface to mesoscopic, mainly NW-plunging F3 folds; and finally, a weakly developed NE–SW-striking, steeply dipping S4 cleavage formed axial surface to mainly NE-plunging F4. The Parrabel Anticline is considered to have formed during the D3 deformation. The more intense development of S2 and S3 on the western margin of the Northern Hastings Block reflects increasing strain related to major shortening of the sequences adjacent to the Tablelands Complex during the Hunter–Bowen Orogeny. The pattern of multiple deformation we have recorded is inconsistent with previous suggestions that the Hastings Block is part of an S-shaped orocline folded about near vertically plunging axes. 相似文献
9.
The results of study of the Ishkinino Co-Cu massive sulfide deposit hosted in ultramafic rocks of the Main Ural Fault Zone are discussed. The ore field is localized in a fragment of Early Devonian accretionary prism composed of oceanic and island-arc tectonic sheets. The antiform structure of the ore field was formed at the collision stage in the Late Devonian. The primary ore was deposited near the bottom in the environment of the accretionary prism at the island-arc stage of evolution, whereas the superimposed ore mineralization was related to the collision stage. The primary ore is composed of massive, stringer-disseminated, and clastic varieties with two mineral assemblages of sulfides and oxides. The superimposed stringer-disseminated ore mineralization is represented by Co-Ni-Fe arsenides and sulfoarsenides, native gold, Bi and Te minerals, and late sulfides and oxides. Loellingite, safflorite, rammelsbergite, and krutovite were identified in the massive sulfide ore for the first time in the Urals. The geochemical attributes of Co-Ni minerals serve as indicators of superimposed processes. Chromites contained in rocks and ore correspond to Cr-spinel of suprasubduction ultramafic rocks in chemical composition. It is suggested that sulfide ore may be found in the accretionary prisms of the presently active island arcs composed of ultramafic sheets. 相似文献
10.
LP/HT metamorphism as a temporal marker of change of deformation style within the Late Palaeozoic accretionary wedge of central Chile 
下载免费PDF全文
下载免费PDF全文 T. Hyppolito C. Juliani A. Garcia‐Casco V. Meira A. Bustamante C. Hall 《Journal of Metamorphic Geology》2015,33(9):1003-1024
A Late Palaeozoic accretionary prism, formed at the southwestern margin of Gondwana from Early Carboniferous to Late Triassic, comprises the Coastal Accretionary Complex of central Chile (34–41°S). This fossil accretionary system is made up of two parallel contemporaneous metamorphic belts: a high‐pressure/low temperature belt (HP/LT – Western Series) and a low pressure/high temperature belt (LP/HT – Eastern Series). However, the timing of deformation events associated with the growth of the accretionary prism (successive frontal accretion and basal underplating) and the development of the LP/HT metamorphism in the shallower levels of the wedge are not continuously observed along this paired metamorphic belt, suggesting the former existence of local perturbations in the subduction regime. In the Pichilemu region, a well‐preserved segment of the paired metamorphic belt allows a first order correlation between the metamorphic and deformational evolution of the deep accreted slices of oceanic crust (blueschists and HP greenschists from the Western Series) and deformation at the shallower levels of the wedge (the Eastern Series). LP/HT mineral assemblages grew in response to arc‐related granitic intrusions, and porphyroblasts constitute time markers recording the evolution of deformation within shallow wedge material. Integrated P–T–t–d analysis reveals that the LP/HT belt is formed between the stages of frontal accretion (D1) and basal underplating of basic rocks (D2) forming blueschists at c. 300 Ma. A timeline evolution relating the formation of blueschists and the formation and deformation of LP/HT mineral assemblages at shallower levels, combined with published geochronological/thermobarometric/geochemistry data suggests a cause–effect relation between the basal accretion of basic rocks and the deformation of the shallower LP/HT belt. The S2 foliation that formed during basal accretion initiated near the base of the accretionary wedge at ~30 km depth at c. 308 Ma. Later, the S2 foliation developed at c. 300 Ma and ~15 km depth shortly after the emplacement of the granitoids and formation of the (LP/HT) peak metamorphic mineral assemblages. This shallow deformation may reflect a perturbation in the long‐term subduction dynamics (e.g. entrance of a seamount), which would in turn have contributed to the coeval exhumation of the nearby blueschists at c. 300 Ma. Finally, 40Ar–39Ar cooling ages reveal that foliated LP/HT rocks were already at ~350 °C at c. 292 Ma, indicating a rapid cooling for this metamorphic system. 相似文献
11.
Many modern accounts of the Devonian rocks of western Norway, which emphasise the extensional processes by which the basins were formed, tend to ignore or gloss over the deformation and metamorphism which these rocks have suffered during contractional deformation. The present account describes extensive ductile folding, penetrative cleavage formation and low-grade regional metamorphism developed in the Devonian strata of the outer Solund region. Although the deformation in this area is more intense than in other Devonian basins, it belongs to the same movement plan. It will also be shown that the Devonian rocks of the Scandinavian Caledonides apparently share a common tectonothermal development. This regional contractional event, conceptually, may relate either to a Mid-Late Devonian arc-continent collision, or to a transpressional strain regime. 相似文献
12.
The collision of the Iranian microcontinent with the Afro-Arabian continent resulted in the deformation of the Zagros orogenic belt. The foreland of this belt in the Persian Gulf and Arabian platform has been investigated for its petroleum and gas resource potentials, but the Zagros hinterland is poorly investigated and our knowledge about its deformation is much less than other parts of this orogen. Therefore, this work presents a new geological map, stratigraphic column and two detailed geological cross sections. This study indicates the presence of a hinterland fold-and-thrust belt on northeastern side of the Zagros orogenic core that consists of in-sequence thrusting and basement involvement in this important part of the Zagros hinterland. The in-sequence thrusting resulted in first- and second-order duplex systems, Mode I fault-bend folding, fault-propagation folding and asymmetric detachment folding which indicate close relationships between folding and thrusting. Study of fault-bend folds shows that layer-parallel simple shear has the same role in the southeastern and northwestern parts of the study area (αe = 23.4 ± 9.1°). A major lateral ramp in the basement beneath the Talaee plain with about one kilometer of vertical offset formed parallel to the SW movement direction and perpendicular to the major folding and thrusting. 相似文献
13.
The Tulungwan-Chaochou Fault system in southern Taiwan represents the boundary between a slate belt of moderate metamorphic grade and a relatively unmetamorphosed fold-and-thrust belt. The offset between hanging wall and footwall of this fault ranges from 7 to 11 km and is considered one of the major tectonostratigraphic faults in Taiwan. This 75-km-long fault system is also one of the most conspicuous topographic features in Taiwan. The geometry, kinematic history and associated subsidiary structures have not been resolved. Field mapping of fabrics and brittle faults show that a 45-km-long west-northwest-vergent antiform defined by folded slaty cleavage exists in the hanging wall of the fault. This antiform has not been previously described and apparently formed in a brittle environment. The flat crest and tight forelimb of the antiform suggests a two-stage deformation model composed of a fault-bend fold followed by a trishear fold. We infer that regional scale fold is associated with a thrust that splays upward from the main detachment. 相似文献
14.
Bing Xu Guochun Zhao Jianhua Li Dongxing Liu Bo Wang Yigui Han Paul R. Eizenhöfer Xiaoran Zhang Wenzhu Hou Qian Liu 《地学前缘(英文版)》2019,10(1):195-212
The Central Asian Orogenic Belt (CAOB) was built up through protracted accretion and collision of a variety of terranes/micro-continents during Neoproterozoic–Mesozoic time. To understand potential links among Paleozoic subduction and accretionary processes that were operative during the development of the southeastern CAOB, we conducted a combined U-Pb and Hf-isotope analysis of detrital zircons from previously defined Devonian, Carboniferous and Early Permian strata in the Bengbatu area, Inner Mongolia. Detrital zircons from (meta-) sandstones in these strata commonly yield major Paleozoic age populations at ca. 300–261 Ma, 351–300 Ma and 517–419 Ma, and also give several Precambrian ages that range from 2687 Ma to 544 Ma. The youngest ages redefine the deposition of all these strata to be in the Middle Permian (Wordian–Capitanian) or later, much younger than previously considered. These ages, coupled with regional magmatic records, support an interpretation of most surrounding areas as possible detritus sources, including the Mongolian arcs to the north, the Northern Accretionary Orogen to the south, and the intervening Erenhot–Hegenshan Ophiolite Belt. Zircons with magmatic ages of ca. 500–350 Ma and ca. 300–261 Ma display a large range of εHf(t) values (?13.97 to +15.31), whereas ca. 350–300 Ma zircons are dominated by positive εHf(t) values (+0.14 to +16.00). These results support the occurrence of two significant shifts of the zircon εHf(t) values, which has tectonic implications for the understanding of the Carboniferous–Permian evolution of the southeastern CAOB. A marked shift from mixed to positive zircon εHf(t) values at 350–330 Ma likely manifests the incipient opening of the Hegenshan Ocean, due to the slab rollback of the subducting Paleo-Asian Oceanic lithosphere. Another shift from positive to mixed zircon εHf(t) values at ca. 300 Ma likely corresponds to a tectonic switch from syn-orogenic subduction-related to post-orogenic extensional setting, genetically related to the tectonic collapse of a formerly overthickened crust. 相似文献
15.
Marble, calc-silicate rock, quartzite and mica schist of Precambrian age in the ‘main Raialo syncline’ in the Udaipur district of central Rajasthan, India, have been affected by folding of four main generations (F1–F4), the first two of which are seen in the scale of map to microsection. The very tight to isoclinal F1 folds with long limbs and thickened hinges are generally reclined or inclined, and plunge gently castward or westward where least reoriented. The axial planes of the F1 folds have been involved in upright warps on east-west axes (F1′), nearly coaxial with the F1 folds, in some sectors. These folds have been overprinted by upright F2 folding of varying tightness with the axial planes striking north to northeast, resulting in interference patterns of different types in all scales. A penetrative axial plane foliation related to F1 folding and a crenulation cleavage parallel to the F2 axial pianes are seen in the micaceous rocks. Two sets of conjugate folds and kink bands of smail scale have been superimposed on the F1–F2 folds in thinly foliated rocks. The first of these sets (F3) has its conjugate axial planes dipping gently northeast and southwest, whereas the paired axial planes of the later set (F4) are vertical with north-northwest and east-west strikes. 相似文献
16.
《International Geology Review》2012,54(16):1932-1944
Nephrite in the Fengtien area of the eastern part of the Central Mountain Range, Taiwan, is associated with antigorite-serpentinite within the Yuli belt, a late Cenozoic subduction–accretionary complex related to the eastward subduction of the South China Sea plate forming the Luzon arc. Diopsidite and clinozoisite rock are two other metasomatic components accompanying nephrite between serpentinites and the greenschist-facies country rock (carbonaceous material-)quartz-mica schist. Detrital zircons were separated from one clinozoisite rock sample, formed through metasomatic replacement after mica-quartz schist at temperatures of 320–420°C or slightly lower, which is lower than the metamorphic temperature conditions of the Yuli belt. Most of the detrital zircons have thin zircon rims less than 15–20 μm wide. These zircon rims, considered as newly formed during metasomatism leading to nephrite/diopsidite/clinozoisite rock formation, were dated by a high lateral resolution secondary ion mass spectrometer (CAMECA NanoSIMS NS50). The resulting 238U/206Pb-204Pb/206Pb inverse isochron gave an age of 3.3 ± 1.7 Ma. The collision of the Eurasian continental margin with the Luzon arc has been suggested to have begun at ca. 6.5 Ma in the Taiwan area. The nephrite formation processes therefore clearly post-dated South China Sea plate subduction. The present date, substantiated by the metamorphic and metasomatic temperature information, demonstrates that the fluid–rock interaction forming Fengtien nephrite would have taken place during a Barrovian-type metamorphic overprint resulting from arc-continent collision, leading to the exhumation of the Yuli belt. This conclusion on nephrite formation with regard to regional tectonics can serve as a working model for future studies on other nephrite deposits with similar occurrences, mostly embedded within Mesozoic or older subduction-accretionary complexes. The Fengtien nephrite deposit is therefore the youngest one of its kind exposed on Earth’s surface. 相似文献
17.
The structure and occurrence of deformation within the hanging wall of the Nobeoka Thrust in Kyushu, Japan, was investigated to understand the dynamic aspects of splay faulting in relation to seismic events. From field observations, hanging wall is suggested to have undergone four phases of deformation. The first phase involved horizontal shortening, as documented by folding and thrusting, followed by a phase of vertical loading shown by the development of horizontal slaty cleavages, pressure solution, and cleavage-parallel mineral vein precipitation. A third phase involved shearing, and deformation along cleavage restricted to near the Nobeoka Thrust, while the fourth phase produced widespread, brittle fracturing associated with the development of pseudotachylyte-bearing faults and tension crack filling veins high angle to cleavage. These four phases can be explained as follows.During the inter-seismic period, an extensionally stable taper was maintained in the inner wedge of the accretionary prism by dominant vertical loading (σ1), in combination with a lesser amount of horizontal compression (σ2) related to the locking of the mega-thrust. Elastic strain energy in the hanging wall of the inner wedge was co-seismically released by slip on the mega-thrust and horizontal shortening in the outer wedge associated with dynamic ductile weakening of the fault plane. This sudden release of elastic strain caused brittle fracturing with σ1 at a high angle to the shear surface of the Nobeoka Thrust, most of the displacement resulting from deformation of the footwall. 相似文献
18.
《Gondwana Research》2014,26(4):1599-1613
The map-view structure of the southern New England Orogen in the eastern Gondwanan margin is characterised by four tight orogenic-scale curvatures: Texas, Coffs-Harbour, Manning and Nambucca oroclines. Here we focus on the geometry of the Manning Orocline and examine whether the inner-arc area of the oroclinal structure is expressed within the accretionary wedge rocks of the Tablelands Complex. Our observations from the Tablelands Complex (Armidale–Walcha area) show that rocks were subjected to penetrative deformation (D1), which resulted in a regional slaty cleavage (S1) and related isoclinal folds. This was followed by subsequent deformation (D2) associated with minor gentle folds. In a larger scale, the steeply dipping S1 structural fabric shows a continuous map-view curvature, thus defining a macroscopic fold structure. We interpret this macroscopic fold as the expression of the Manning Orocline within the accretionary wedge complex. This interpretation is consistent with the contorted spatial distribution of other tectonic elements (serpentinite belt, forearc basin terranes and early Permian granitoids), which independently define the structure of the Manning Orocline. Our new structural data support the existence of the Manning Orocline and the quadruple oroclinal geometry of the whole southern New England Orogen. The origin of these oroclines is attributed to multiple stages of bending, possibly associated with an earlier phase of curvature during slab rollback (in the early Permian), followed by a subsequent (middle-late Permian) episode of contractional deformation that tightened the oroclinal structure. 相似文献
19.
Tectonometamorphic evolution of the Atbashi high‐P units (Kyrgyz CAOB,Tien Shan): Implications for the closure of the Turkestan Ocean and continental subduction–exhumation of the South Kazakh continental margin 下载免费PDF全文
下载免费PDF全文 Chloé Loury Yann Rolland Stéphane Guillot Pierre Lanari Clément Ganino Raphael Melis Anthony Jourdon Carole Petit Olivier Beyssac Sylvain Gallet Patrick Monié 《Journal of Metamorphic Geology》2018,36(8):959-985
The South Tien Shan (STS) belt results from the last collision event in the western Central Asian Orogenic Belt (CAOB). Understanding its formation is of prime importance in the general framework of the CAOB. The Atbashi Range preserves high‐P (HP) rocks along the STS suture, but still, its global metamorphic evolution remains poorly constrained. Several HP units have been identified: (a) a HP tectonic mélange including boudins of mafic eclogites in a sedimentary matrix, (b) a large (>100 km long) high‐P metasedimentary unit (HPMU) and (c) a lower blueschist facies accretionary prism. Raman Spectroscopy on carbonaceous material combined with phengite and chlorite multiequilibria and isochemical phase diagram modelling indicates that the HPMU recorded homogeneous P–T conditions of 23–25 kbar and 560–570°C along the whole unit. 40Ar/39Ar dating on phengite from the HPMU ranges between 328 and 319 Ma at regional scale. These ages are interpreted as (re‐) crystallization ages of phengite during Tmax conditions at a pressure range of 20–25 kbar. Thermobarometry on samples from the HP tectonic mélange provides similar metamorphic peak conditions. Thermobarometry on the blueschist to lower greenschist facies accretionary prism indicates that it underwent P–T conditions of 5–6 kbar and 290–340°C, highlighting a 17–20 kbar pressure gap between the HPMU‐tectonic mélange units and the accretionary prism. Comparison with available geochronological data suggests a very short time span between the prograde path (340 Ma), HP metamorphic peak (330 Ma), the Tmax (328–319 Ma) and the final exhumation of the HPMU (303–295 Ma). Extrusion of the HPMU, accommodated by a basal thrust and an upper detachment, was driven by buoyant forces from 70–75 km up to 60 km depth, which directly followed continental subduction and detachment of the HPMU. At crustal depths, extrusion was controlled by collisional tectonics up to shallow levels. Lithological homogeneity of the HPMU and its continental‐derived character from the North Tien Shan suggest this unit corresponds to the hyper‐extended continental margin of the Kazakh continent, subducted southward below the north continental active margin of the Tarim craton. Integration of the available geological data allows us to propose a general geodynamic scenario for Tien Shan during the Carboniferous with a combination of (a) N‐dipping subduction below the Kazakh margin of Middle Tien Shan until 390–340 Ma and (b) S‐dipping subduction of remaining Turkestan marginal basins between 340 and 320 Ma. 相似文献
20.
Kirk McIntosh Yosio Nakamura T.-K. Wang R.-C. Shih Allen Chen C.-S. Liu 《Tectonophysics》2005,401(1-2):23-54
We have used combined onshore and offshore wide-angle seismic data sets to model the velocity structure of the Taiwan arc–continent collision along three cross-island transects. Although Taiwan is well known as a collisional orogen, relatively few data have been collected that reveal the deeper structure resulting from this lithospheric-scale process. Our southern transect crosses the Hengchun Peninsula of southernmost Taiwan and demonstrates characteristics of incipient collision. Here, 11-km-thick, transitional crust of the Eurasian plate (EUP) subducts beneath a large, rapidly growing accretionary prism. This prism also overrides the N. Luzon forearc to the east as it grows. Just west of the arc axis there is an abrupt discontinuity in the forearc velocity structure. Because this break is accompanied by intense seismicity, we interpret that the forearc block is being detached from the N. Luzon arc and Philippine Sea plate (PSP) at this point. Our middle transect illustrates the structure of the developing collision. Steep and overturned velocity contours indicate probable large-scale thrust boundaries across the orogen. The leading edge of the coherent PSP appears to extend to beneath the east coast of Taiwan. Deformation of the PSP is largely limited to the remnant N. Luzon arc with no evidence of crustal thickening to the east in the Huatung basin. Our northern transect illustrates slab–continent collision—the continuing collision of the PSP and EUP as the PSP subducts. The collisional contact is below 20 km depths along this transect NE of Hualien. This transect shows elements of the transition from arc–continent collision to Ryukyu arc subduction. Both of our models across the Central Range suggest that the Paleozoic to Mesozoic basement rocks there may have been emplaced as thick, coherent thrust sheets. This suggests a process of partial continental subduction followed by intra-crustal detachment and buoyancy-aided exhumation. Although our models provide previously unknown structural information about the Taiwan orogen, our data do not define the deepest orogenic structure nor the structure of western Taiwan. Additional seismic (active and passive), geologic, and geodynamic modeling work must be done to fully define the structure, the active deformation zones, and the key geodynamic process of the Taiwan arc–continent collision. 相似文献