共查询到19条相似文献，搜索用时 156 毫秒
1.
隔震换能结构体系的能量分析 总被引：6，自引：0，他引：6
将换能器安装在隔震结构的隔震层处,由结构和换能装置构成隔震换能结构体系,它既可以将地震输入给结构的部分能量转换成液压能,实现地震能量的转换,又能减小隔震层的水平位移,降低对隔震层的技术要求,降低造价。本文详细研究地震输给隔震换能结构体系的能量在体系各部分的分配,并与普通隔震结构对比,从能量的角度揭示隔震换能体系的换能控制原理。 相似文献
2.
3.
4.
磁流变智能基础隔震系统研究 总被引：5，自引：3，他引：2
本文将磁流变(MR)阻尼器与普通橡胶隔震支座相结合,组成智能基础隔震系统应用到结构控制中。在详细介绍了系统的各部分与整体运行情况后,采用LQR经典线性最优控制算法对结构进行了振动台试验研究。试验结果表明,由MR阻尼器提供可调阻尼力的智能隔震控制系统,能有效克服被动隔震最优控制频带窄的缺点,对较宽频域范围地震激励能进行有效的振动控制。其相对一般被动隔震装置,能同时减小上部结构加速度和隔震层位移. 相似文献
5.
6.
应用MBC策略的MRD 隔震结构半主动控制 总被引：2，自引：0，他引：2
磁流变阻尼器(Magnetorheological Damper,MRD)与隔震垫组成的半主动隔震系统能有效地改善被动隔震系统的性能,消除隔震层因过大变形产生的不利影响。基于市场机制的控制(Market-Based Control,MBC)策略是一种利用自由经济市场来模拟控制系统,用销售商和消费者来代替能量源系统和受控系统,并应用市场中商品的供需规律来完成系统控制能量的分配,实现对受控系统有效控制的策略。本文将MBC策略应用于此种半主动隔震系统,提出了相应的控制策略,实现对MRD电压的实时有效控制。算例分析表明,采用此策略能充分利用MRD的变阻尼特性,使结构振动控制效果显著。 相似文献
7.
针对巨-子结构隔震体系,在隔震层处或子结构顶部与主结构连接处,施加SMA-压电智能复合阻尼器,从而形成巨-子结构智能隔震体系。本文通过限界Hrovat最优控制算法设计了巨-子结构智能隔震体系的半主动控制器,在此基础上,对巨-子结构智能隔震体系进行了Simulink控制效果仿真分析,同时比较了控制装置安装位置的不同对结构控制效果的影响,并与普通隔震结构的减震效果进行了对比。研究结果表明,智能隔震控制1（隔震层加控制装置）和智能隔震控制2（子结构顶部加控制装置）2种控制方案在控制结构的位移方面效果相差不大。总体而言,智能隔震控制2对于控制子结构单元顶部的绝对加速度效果更为显著,但是相对于普通隔震而言,特别是在控制隔震层位移方面2种方案都具有较好的控制效果。实施智能控制可以有效改善巨-子结构被动控制体系的抗震性能,并能降低隔震结构在遭受强震时由于隔震层出现过大位移导致结构倾覆的危险。 相似文献
8.
9.
基于AFSMC算法的结构非线性振动MR控制与仿真分析 总被引：2，自引：0，他引：2
作为最近发展起来的高性能半主动控制装置,磁流变阻尼器通过改变磁场强度来调节控制力,可靠度高,体积小,出力大,并且具有Fail-Safe的特点,是一种具有广泛应用前景的新型结构控制装置。本文主要研究结构非线性振动的磁流变阻尼半主动控制。首先采用我们提出的自适应模糊滑模控制(AFSMC)算法得到了结构非线性振动的主动控制力,然后参照主动控制力,提出和仿真实现了结构非线性振动的磁流变阻尼半主动控制。最后,针对3层和20层benchm ark非线性模型,每层均设置一个磁流变阻尼器,对在给定的地震动下的结构响应进行了计算,分析了半主动控制跟踪主动控制的效果,并且对于半主动控制下的结构位移响应、加速度响应等各项指标也进行了对比分析。仿真结果表明,由于自适应模糊滑模控制算法与半主动控制算法相结合可以很好地实现结构非线性振动的半主动控制,所以能够得到令人满意的控制结果。 相似文献
10.
针对带转换层复杂高层建筑抗震性能较差的缺点,提出新型的分段隔震体系.本文从随机振动理论和能量平衡原理出发,建立了基于能量的分段隔震结构被动控制参数优化方法.通过MATLAB编程对算例进行多工况参数分析,获得了控制参数对隔震层与地震总输人能量的比值的影响规律:中间隔震层位于结构中部附近时,存在最优频率比和阻尼比使得隔震层... 相似文献
11.
The yield level of an insulator is one of the important parameters which are related to responses and absorbing energy under seismic input energy in isolated structures. The purpose of this paper is to determine the optimal ratios of yield force of the isolator (Qy) to the total weight of the structures (W). To obtain the optimal ratio, 1044 two-degree-of-freedom isolated bridge models, which have bilinear isolators, were selected. These 2-DOF isolated bridge models with superstructure isolation can consider pier flexibility and various parameters of the isolator. Two formulas for determining the optimal yield ratio are proposed and compared with the previous researches. RAE (the ratio of absorbed energy by the isolator to the total input energy) is related directly to structural responses, and Optimal Yield Ratio (OYR), defined as a yield ratio at maximum RAE, can be obtained from the relationship between RAE and Qy/W. Here, we found that RAE is a reliable factor to evaluate OYR, and it is proportional to earthquake amplitudes under the same kinds of earthquake loadings. Using the proposed formulas, OYR is determined and the optimal yield force of the isolator can be obtained easily and reliably at a seismic isolation design stage. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
12.
A computational algorithm for maximizing the control efficiency in actively controlling the elastic structural responses during earthquake is proposed. Study of optimal linear control using a single degree of freedom shows that applying active control is very effective in reducing the structural displacement and velocity responses for long‐period structures, but at the same time it has an adverse effect in increasing the absolute acceleration response. The extent of this adverse effect reduces the effectiveness of the control system, and therefore it poses a limit on the maximum control force in order to provide maximum control efficiency. In view of this shortcoming, maximum control energy dissipation is used to define the most effective optimal linear control law. Less displacement and velocity response are expected as larger control force is applied, but there is always a limit that maximum control energy can be dissipated. This study shows that this limit depends on the structural characteristics as well as the input ground motion, and a general trend is that the maximum control energy decreases as damping increases. Finally, application of the proposed algorithm on a six‐storey hospital building is presented to show the effectiveness of using optimal linear control on a multi‐degree‐of‐freedom system from the control energy perspectives. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
13.
This paper presents an active control algorithm using the probability density function of structural energy. It is assumed that structural energy under excitation has a Rayleigh probability distribution. This assumption is based on the fact that the Rayleigh distribution satisfies the condition that the structural energy is always positive and the occurrence probability of minimum energy is zero. The magnitude of the control force is determined by the probability that the structural energy exceeds the specified target critical energy, and the sign of the control force is determined by the Lyapunov controller design method. The proposed control algorithm shows much reduction of peak responses under seismic excitation compared with the LQR controller, and it can consider the control force limit in the controller design. Also, the chattering problem which sometimes occurs in the Lyapunov controller can be avoided. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
14.
Development of a tunable friction pendulum system for semi‐active control of building structures under earthquake ground motions 
下载免费PDF全文
下载免费PDF全文 The Friction Pendulum System (FPS) isolator is commonly used as a base isolation system in buildings. In this paper, a new tunable FPS (TFPS) isolator is proposed and developed to act as a semi‐active control system by combining the traditional FPS and semi‐active control concept. Theoretical analysis and physical tests were carried out to investigate the behavior of the proposed TFPS isolator. The experimental and theoretical results were in good agreement, both suggesting that the friction force of the TFPS isolator can be tuned to achieve seismic isolation of the structure. A series of numerical simulations of a base‐isolated structure equipped with the proposed TFPS isolator and subjected to earthquake ground motions were also conducted. In the analyses, the linear quadratic regulator (LQR) method was adopted to control the friction force of the proposed TFPS, and the applicability and effectiveness of the TFPS in controlling the structure's seismic responses were investigated. The simulation results showed that the TFPS can reduce the displacement of the isolation layer without significantly increasing the floor acceleration and inter‐story displacement of the superstructure, confirming that the TFPS can effectively control a base‐isolated structure under earthquake ground motions. 相似文献
15.
Optimal PD/PID control of smart base isolated buildings equipped with piezoelectric friction dampers
Long-period pulses in near-field earthquakes lead to large displacements in the base of isolated structures.To dissipate energy in isolated structures using semi-active control,piezoelectric friction dampers(PFD) can be employed.The performance of a PFD is highly dependent on the strategy applied to adjust its contact force.In this paper,the seismic control of a benchmark isolated building equipped with PFD using PD/PID controllers is developed.Using genetic algorithms,these controllers are optimized to create a balance between the performance and robustness of the closed-loop structural system.One advantage of this technique is that the controller forces can easily be estimated.In addition,the structure is equipped with only a single sensor at the base floor to measure the base displacement.Considering seven pairs of earthquakes and nine performance indices,the performance of the closed-loop system is evaluated.Then,the results are compared with those given by two well-known methods:the maximum possive operation of piezoelectric friction dampers and LQG controllers.The simulation results show that the proposed controllers perform better than the others in terms of simultaneous reduction of floor acceleration and maximum displacement of the isolator.Moreover,they are able to reduce the displacement of the isolator systems for different earthquakes without losing the advantages of isolation. 相似文献
16.
温度作用是结构设计中不可忽视的作用,如何有效控制温度作用一直是一个重要的课题。近些年,随着建筑和结构的发展,出现越来越多的超长结构和隔震结构。对于超长结构的温度效应有许多学者做过相关的研究,但超长隔震结构的温度效应还研究甚少,温度作用下的结构变形和内力特点还不甚明晰。对超长剪力墙隔震结构的温度效应进行了探讨,利用有限元软件ETABS建立了结构的隔震模型和非隔震模型。通过对比2种模型在季节温差和混凝土收缩当量温差共同作用下的结构变形特点、构件内力和应力大小,分析隔震支座变形量与所在位置关系,发现超长隔震结构较超长非隔震结构,隔震层以上结构由于约束释放在温度作用下接近自由变形。而结构构件的内力和应力大大减小,得出隔震支座能充分消除结构因温度效应产生的不利影响,从而保护结构和构件的结论,对超长隔震结构的温度效应控制提供一定的思路和参考。 相似文献
17.
层间隔震技术对于结构竖向不规则以及结构增层等状况有良好的适用性。然而,层间隔震可能出现的较大隔震层变形会带来结构设计的困难。通过在隔震层中设置阻尼元件可以减少变形,但是过大的阻尼出力和过多的数量需求可能导致空间布置和安装不便。惯容元件为解决以上问题提供了一种新的途径。该研究提出采用惯容隔震系统作为层间隔震提高能量耗散效率的手段以控制地震响应,同时也给出了基于性能需求的惯容层间隔震的参数优化设计方法。并以一个标准钢结构模型验证了方法的有效性。结果表明:惯容元件的使用显著降低了上部子结构的地震响应和隔震层的变形,惯容系统实现了预期的耗能增效作用。 相似文献
18.
针对现有附加有效阻尼比计算方法存在的问题,本文从能量的角度揭示了阻尼比对结构影响的机理.从结构设计的角度,提出一种在时程分析下基于楼层剪力的消能减震结构等效阻尼比计算方法.对布置黏滞阻尼器和软钢阻尼器的消能减震模型,采用本文提出的等效阻尼比计算方法,建立等效结构进行结构响应对比.结果表明,由该计算方法得到的等效阻尼比能... 相似文献
19.
In this paper, the effect of lead core heating and associated strength deterioration on the seismic response of bridges isolated with lead rubber bearings (LRB) is investigated as a function of the characteristics of the isolator and near fault ground motions with forward rupture directivity effect. Furthermore, the ability of bounding analyses to provide a design envelope for maximum isolator force and maximum isolator displacement is verified. For this purpose, a series of nonlinear dynamic analyses are conducted for LRB isolated bridges where both deteriorating and non‐deteriorating force‐deformation relationship of LRB were employed. The analyses are performed for both simulated and recorded ground motions. It is found that while the temperature rise in the lead core generally increases with increasing magnitude and number of near fault ground motion velocity pulses, it decreases with larger distances from the fault. It is also found that bounding analysis method provides conservative (envelope) estimates of maximum isolator displacement and maximum isolator force for design purposes that fulfill its intended purpose. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献