共查询到20条相似文献，搜索用时 78 毫秒
1.
This paper applies a full-field technique to invert bottom sound profile and bottom reflectivity from simulated acoustic data in a shallow water environment. Bottom sound-speed profile and bottom reflectivity have been traditionally estimated using seismic reflection/refraction techniques when acoustic ray paths and travel time can be identified and measured from the data. However, in shallow water, the many multipaths due to bottom reflection/refraction make such identification and measurement rather difficult. A full-field inversion technique is presented here that uses a broad-band source and a vertical array for bottom sound-speed and reflectivity inversion. The technique is a modified matched field inversion technique referred to as matched beam processing. Matched beam processing uses conventional beamforming processing to transform the field data into the beam domain and correlate that with the replica field also in the beam domain. This allows the analysis to track the acoustic field as a function of incident/reflected angle and minimize contamination or mismatch due to sidelobe leakage 相似文献
2.
Based on the general concept of the inverse acoustic radiation problem, the temporal scanning of a stationary acoustic field along a closed contour is used to simplify the measurement approach for obtaining information on source directionality. The mathematical formulation is derived from a model of the two-dimensional acoustic field. The formulation of the inverse problem is also investigated to establish a methodology for improving the angular resolution of the array processing. The fundamental relationship between the sound sources and the circular passive synthetic array is explored, utilizing existing mathematical methods, in order to develop the processing algorithm. Other subjects of practical interest, such as directional ambiguity, effect of Doppler frequency, interference noise, and processing gain are discussed. It is concluded that the results can be used to establish guidelines for engineering design and deployment of this type of synthetic array, and to further exploit the new array signal processing technique 相似文献
3.
The paper discusses an inversion method that allows the rapid determination of in situ geoacoustic properties of the ocean bottom without resorting to large acoustic receiving apertures, synthetic or real. The method is based on broad-band waterborne measurements and modeling of the waveguide impulse response between a controlled source and a single hydrophone. Results from Yellow Shark '94 experiments in Mediterranean shallow waters using single elements of a vertical array are reviewed, inversion of the bottom parameters is performed with an objective function that includes the processing gain of a model-based matched filter (MBMF) receiver relative to the conventional matched filter. The MBMF reference signals incorporate waveguide Green's functions for known geometry and water column acoustic model and hypothesized bottom geoacoustic models. The experimental inversion results demonstrated that, even for complex environmental conditions, a single transmission of a broad-band (200-800 Hz) coded signal received at a single depth and a few hundred forward modeling runs were sufficient to correctly resolve the bottom features. These included the sound speed profile, attenuation, density, and thickness of the top clay sediment layer, and sound speed and attenuation of the silty clay bottom. Exhaustive parameter search proved unequivocally the low-ambiguity and high-resolution properties of the MBMF-derived objective. The single-hydrophone results compare well with those obtained under identical conditions from matched-field processing of multitone pressure fields sampled on the vertical array. Both of these results agree with expectations from geophysical ground truth. The MBMF has been applied successfully to a field of advanced drifting acoustic buoys on the Western Sicilian shelf, demonstrating the general applicability of the inversion method presented 相似文献
4.
This paper deals with the development of a processing technique that improves the signal-to-noise ratio (SNR) at the single sensor for a received signal that is embedded in a partially correlated noise field. The approach of this study is unique in that the noise is treated as being non-white and partially correlated. The concept of the proposed development is based on the time interval over which the temporal coherence or correlation properties of a noise field are defined. For narrowband signals, the associated temporal coherence period is much longer than the correlation time interval of the anisotropic noise field. Thus, a coherent integration of discontinuous segments of received signals will enhance the SNR at the single sensor by lowering the correlation properties of the associated non-white noise. Reconstruction of the narrow-band signal time series, with improved SNR at the sensor will allow the use of the existing high resolution techniques to be utilized more effectively by lowering their threshold values in order to detect very weak signals. The intention here is to integrate the characteristics of the real anisotropic noise field during the preliminary processing stages of the received signals by an array of sensors. Simulations show that the proposed method can be integrated in the signal processing functionality of sonar and radar systems 相似文献
5.
Ship noise received on a horizontal array towed behind the ship is shown to be useful as a potentially diagnostic tool for estimating local acoustic bottom properties. In numerical simulations, tow-ship noise which bounces off the bottom is processed on a beamformer that shows the arrival angles; the beamformer output is readily interpreted by relating it to the Green's function of the acoustic wave equation. Simple signal processing is shown to be sufficient to extract the propagation angles of the "trapped" (i.e., propagating) modes of the acoustic waveguide. By relating the trapped modes to a basic geophysical model of the bottom, one can predict acoustic-propagation conditions for a particular bottom-interacting ocean acoustic environment. 相似文献
6.
The conventional matched field processing (MFP) uses large vertical arrays to locate an underwater acoustic target. However, the use of large vertical arrays increases equipment and computational cost, and causes some problems such as element failures, and array tilting to degrade the localization performance. In this paper, the matched field localization method using two-hydrophone is proposed for underwater acoustic pulse signals with an unknown emitted signal waveform. Using the received signal of hydrophones and the ocean channel pulse response which can be calculated from an acoustic propagation model, the spectral matrix of the emitted signal for different source locations can be estimated by employing the method of frequency domain least squares. The resulting spectral matrix of the emitted signal for every grid region is then multiplied by the ocean channel frequency response matrix to generate the spectral matrix of replica signal. Finally, the matched field localization using two-hydrophone for underwater acoustic pulse signals of an unknown emitted signal waveform can be estimated by comparing the difference between the spectral matrixes of the received signal and the replica signal. The simulated results from a shallow water environment for broadband signals demonstrate the significant localization performance of the proposed method. In addition, the localization accuracy in five different cases are analyzed by the simulation trial, and the results show that the proposed method has a sharp peak and low sidelobes, overcoming the problem of high sidelobes in the conventional MFP due to lack of the number of elements. 相似文献
7.
重物在落水和着底过程中都会产生瞬态声信号,这类信号可被运用于浅水区域水下目标定位。 针对浅水区域目标定位的问题,提出了一种基于小型立体五元基阵的瞬态声源快速被动定位算法。 在分析重物落水信号特征的基础上,选取合适的广义互相关加权函数求得传声器之间的声程差,运用快速最小二乘搜索算法进行声源定位。 结果表明:运用 5 传声器阵列可以同时兼顾定位精度和鲁棒性,且满足实时性要求,该方法可运用于浅水区域瞬态声源定位等领域。 相似文献
8.
Recent advances in high-speed underwater acoustic communications 总被引：4，自引：0，他引：4
In recent years, underwater acoustic (UWA) communications have received much attention as their applications have begun to shift from military toward commercial. Digital communications through UWA channels differ substantially from those in other media, such as radio channels, due to severe signal degradations caused by multipath propagation and high temporal and spatial variability of the channel conditions. The design of underwater acoustic communication systems has until recently relied on the use of noncoherent modulation techniques. However, to achieve high data rates on the severely band-limited UWA channels, bandwidth-efficient modulation techniques must be considered, together with array processing for exploitation of spatial multipath diversity. The new generation of underwater communication systems, employing phase-coherent modulation techniques, has a potential of achieving at least an order of magnitude increase in data throughput. The emerging communication scenario in which the modern underwater acoustic systems mill operate is that of an underwater network consisting of stationary and mobile nodes. Current research focuses on the development of efficient signal processing algorithms, multiuser communications in the presence of interference, and design of efficient modulation and coding schemes. This paper presents a review of recent results and research problems in high-speed underwater acoustic communications, focusing on the bandwidth-efficient phase-coherent methods. Experimental results are included to illustrate the state-of-the-art coherent detection of digital signals transmitted at 30 and 40 kb/s through a rapidly varying one-mile shallow water channel 相似文献
9.
It is extremely difficult to determine shallow ocean bottom properties (such as sediment layer thicknesses, densities, and sound speeds). However, when acoustic propagation is affected by such environmental parameters, it becomes possible to use acoustic energy as a probe to estimate them. Matched-field processing (MFP) which relies on both field amplitude and phase can be used as a basis for the inversion of experimental data to estimate bottom properties. Recent inversion efforts applied to a data set collected in October 1993 in the Mediterranean Sea north of Elba produce major improvements in MFP power, i.e., in matching the measured field by means of a model using environmental parameters as inputs, even using the high-resolution minimum variance (MV) processor that is notoriously sensitive and usually results in very low values. The inversion method applied to this data set estimates water depth, sediment thickness, density, and a linear sound-speed profile for the first layer, density and a linear sound-speed profile for a second layer, constant sound speed for the underlying half space, array depth, and source range and depth. When the inversion technique allows for the array deformations in range as additional parameters (to be estimated within fractions of a wavelength, e.g., 0.1 m), the MFP MV peak value for the Med data at 100 Hz can increase from 0.48 (using improved estimates of environmental parameters and assuming a vertical line array) to 0.68 (using improved estimates of environmental parameters PLUS improved phone coordinates). The ideal maximum value would be 1.00 (which is achieved for the less sensitive Linear processor). However, many questions remain concerning the reliability of these inversion results and of inversion methods in general 相似文献
10.
The self-starter is improved using the operator of the split-step Pade solution. In addition to providing greater stability and being applicable closer to the source, the improved self-starter is an efficient forward model for geoacoustic inversion. It is necessary to solve only O(10) tridiagonal systems of equations to obtain the acoustic field on a vertical array located O(10) wavelengths from a source. This experimental configuration is effective for geoacoustic inverse problems involving unknown parameters deep in the ocean bottom. For problems involving depth-dependent acoustic parameters, the improved self-starter can be used to solve nonlinear inverse problems involving O(10) unknown sediment parameters in less than a minute on the current generation of workstations 相似文献
11.
An active source electromagnetic sounding system for marine use 总被引：2，自引：0，他引：2
M. C. Sinha P. D. Patel M. J. Unsworth T. R. E. Owen M. R. G. Maccormack 《Marine Geophysical Researches》1990,12(1-2):59-68
Instrumentation has been developed for carrying out active source electromagnetic sounding experiments in the deep oceans. Experiments of this type are directly and uniquely sensitive to the presence of molten or partially molten material, to temperature structure and to the porosity of upper crustal rocks such as those that accommodate hydrothermal circulation systems. Electromagnetic sounding experiments therefore represent an extremely desirable addition to the existing range of geophysical techniques for studying geological processes in thermally, hydrothermally or magmatically active regions—for example, at oceanic spreading centres.The instruments can be operated in regions of rugged, unsedimented sea bottom terrain, and are designed for investigating the distribution of electrical conductivity within the oceanic crust and uppermost mantle. The instrumentation consists of a deep towed, horizontal electric dipole transmitter and a set of free-fall, sea bottom, horizontal electric field recording devices.The transmitter is a deep-towed instrument, which is provided with power from the towing ship through a conducting cable. The transmitter package is fitted with an integral echo sounder, which allows it to be towed safely a short distance above the seabed. Electromagnetic signals are transmitted from a neutrally-buoyant antenna array, which is streamed behind the deep tow.The sea bottom receiving instruments each consist of a recoverable package which contains the instrumentation and digital recording system, an acoustic release unit, four low-noise, porous electrodes arranged in two orthogonal, horizontal dipoles, and a disposable bottom weight.The instruments have been used at sea on three occasions. On their most recent use, active source signals were successfully recorded during an experiment to investigate crustal magmatism and hydrothermal circulation beneath the axis of the East Pacific Rise. 相似文献
12.
Siderius M. Snellen M. Simons D.G. Onken R. 《Oceanic Engineering, IEEE Journal of》2000,25(3):364-386
In October 1997, the EnVerse 97 shallow-water acoustic experiments were jointly conducted by SACLANT Centre, TNO-FEL, and DERA off the coast of Sicily, Italy. The primary goal of the experiments was to determine the sea-bed properties through inversion of acoustic data. Using a towed source, the inversion method is tested at different source/receiver separations in an area with a range-dependent bottom. The sources transmitted over a broadband of frequencies (90-600 Hz) and the signals were measured on a vertical array of hydrophones. The acoustic data were continuously collected as the range between the source and receiving array varied from 0.5 to 6 km. An extensive seismic survey was conducted along the track providing supporting information about the layered structure of the bottom as well as layer compressional sound speeds. The oceanic conditions were assessed using current meters, satellite remote sensing, wave height measurements, and casts for determining conductivity and temperature as a function of water depth. Geoacoustic inversion results taken at different source/receiver ranges show sea-bed properties consistent with the range-dependent features observed in the seismic survey data. These results indicate that shallow-water bottom properties may be estimated over large areas using a towed source fixed receiver configuration 相似文献
13.
There has been a long-standing debate concerning how dangerous seismic surveys are with respect to marine life. Marine seismic
work today is dominated by airgun technology, where high energy is generated by a release of compressed air into the water.
The objective of the “Time coded impulse seismic technique” project is to examine whether a new low energy acoustic source
can be used for seismic purposes. If the method turns out to be successful, the low output energy and continuous operation
will make the source suitable in environmental sensitive areas. The Low level Acoustic Combustion Source (LACS) is a petrol
driven pulsed underwater acoustic source. It operates at a few meters depth, and each shot can be digitally controlled from
the surface by a computer located in the mother vessel. A presentation of the recorded LACS signal characteristics, the modulation,
the Pseudo Noise coding/decoding principles and field test results, is given. The importance of using an optimized code with
fine resolution and of using the near field recording as a correlator sequence is demonstrated. Clear correlation peaks could
then be seen from the bottom and sub bottom reflectors. 相似文献
14.
Wilmut M.J. Chapman N.R. Heard G.J. Ebbeson G.R. 《Oceanic Engineering, IEEE Journal of》2007,32(4):940-947
This paper describes a simple approach for inferring the depth and track of a sound source at short ranges by inversion of acoustic field data at a set of sea bottom hydrophones. At short ranges, the acoustic field consists of a dominant Lloyd mirror (LM) signal from the direct and surface-reflected ray paths and a series of bottom-reflected paths that modulate the LM signal. A computationally efficient propagation model based on the method of images is developed to calculate replica fields for the inversion. The matched field inversion method for inferring the source depth and track is demonstrated using data from an experiment carried out in shallow water off the east coast of Canada. The estimated values were in very good agreement with independent measurements taken during the experiment. 相似文献
15.
The location of the hydrophones on a towed underwater acoustic array as a function of time (array element localization) is needed for signal processing. Methods to perform this localization using least squares polynomial fitting to data from depth sensors, heading sensors, and sensors detecting a ping from a single source are discussed. Arc distance along the array is used as the independent parameter so that all solutions are constrained to be space curves. Examples of application to real data are presented, and techniques to discriminate against bad sensor data are discussed 相似文献
16.
TenCate J.A. Muir T.G. Caiti A. Kristensen A. Manning J.F. Shooter J.A. Koch R.A. Michelozzi E. 《Oceanic Engineering, IEEE Journal of》1995,20(4):300-310
The problem of locating very low frequency sound sources in shallow water is made difficult by the interaction of propagating acoustic waves with the sea floor. Slow wave speeds and the attendant short wavelengths suggest that low frequency beamforming and source localization with sea floor geophones can be accomplished with relatively small arrays when compared with hydrophone arrays in the water column. To test the feasibility of this approach, experiments were carried out in the shallow water of the Malta Channel of the Straits of Sicily where the Scholte wave speed was some 10 to 20 times slower that the speed of sound in water. A linear array of ten vertically gimballed geophones was deployed and measurements were made on propagating seismic wave fields generated by explosive shots. The resulting directivities, beam patterns, and sidelobe characteristics are in excellent agreement with array theory, which suggests that coherent processing is a viable technique on which to base new applications for seismic arrays on the sea floor. Supporting materials on the geophysics of Scholte waves and calculations of the wave field at the site are presented 相似文献
17.
Gorodetskaya E.Yu. Malekhanov A.I. Sazontov A.G. Vdovicheva N.K. 《Oceanic Engineering, IEEE Journal of》1999,24(2):156-171
This paper presents results of combined consideration of sound coherence and array signal processing in long-range deep-water environments. Theoretical evaluation of the acoustic signal mutual coherence function (MCF) of space for a given sound-speed profile and particular scattering mechanism is provided. The predictions of the MCF are employed as input data to investigate the coherence-induced effects on the horizontal and vertical array gains associated with linear and quadratic beamformers with emphasis on the optimal ones. A method of the radiation transport equation is developed to calculate the MCF of the multimode signal under the assumption that internal waves or surface wind waves are the main source of long-range acoustic fluctuations in a deep-water channel. Basic formulations of the array weight vectors and small signal deflection are then exploited to examine optimal linear and quadratic processors in comparison with plane-wave beamformers. For vertical arrays, particular attention is paid also to evaluation of the ambient modal noise factor. The numerical simulations are carried out for range-independent environments from the Northwest Pacific for a sound frequency of 250 Hz and distances up to 1000 km. It was shown distinctly that both signal coherence degradation and modal noise affect large-array gain, and these effects are substantially dependent on the processing technique used. Rough surface sound scattering was determined to cause the most significant effects 相似文献
18.
Mikhalevsky P.N. Gavrilov A.N. Baggeroer A.B. 《Oceanic Engineering, IEEE Journal of》1999,24(2):183-201
In April 1994, coherent acoustic transmissions were propagated across the entire Arctic basin for the first time. This experiment, known as the Transarctic Acoustic Propagation Experiment (TAP), was designed to determine the feasibility of using these signals to monitor changes in Arctic Ocean temperature and changes in sea ice thickness and concentration. CW and maximal length sequences (MLS) were transmitted from the source camp located north of the Svalbard Archipelago 1000 km to a vertical line array in the Lincoln Sea and 2600 km to a two-dimensional horizontal array and a vertical array in the Beaufort Sea. TAP demonstrated that the 19.6-Hz 195-dB (251-W) signals propagated with both sufficiently low loss and high phase stability to support the coherent pulse compression processing of the MLS and the phase detection of the CW signals. These yield time delay measurements an order of magnitude better than what is required to detect the estimated 80-ms/year changes in travel time caused by interannual and longer term changes in Arctic Ocean temperature. The TAP data provided propagation loss measurements to compare with the models to be used for correlating modal scattering losses with sea ice properties for ice monitoring. The travel times measured in TAP indicated a warming of the Atlantic layer in the Arctic of close to 0.4°C, which has been confirmed by direct measurement from icebreakers and submarines, demonstrating the utility of acoustic thermometry in the Arctic. The unique advantages of acoustic thermometry in the Arctic and the importance of climate monitoring in the Arctic are discussed. A four-year program, Arctic Climate Observations using Underwater Sound is underway to carry out the first installations of sources and receivers in the Arctic Ocean 相似文献
19.
Booth N.O. Baxley P.A. Rice J.A. Schey P.W. Hodgkiss W.S. D'Spain G.L. Murray J.J. 《Oceanic Engineering, IEEE Journal of》1996,21(4):402-412
Acoustic source localization using matched-field processing is presented for multitone signals from the Shallow Water Evaluation cell Experiment 3 (SWellEX-3). The experiment was carried out in July 1994 west of Point Loma, CA, in 200 m of water of complex bathymetry. The multitone signal (ten tones between 50 and 200 Hz) was transmitted from an acoustic source towed at various depths over tracks which produced complex propagation paths to a vertical line array receiver. Broad-band and narrow-hand processing, localization, and tracking results are compared with each other and with independent estimates of source position. With narrow-band processing, mismatch between the data and the predicted signal replica of ~1 dB reduced the mainlobe to levels equal to or below the sidelobes. Incoherently averaging the processing output over the multiple tones reduced range/depth sidelobe levels, allowing accurate source localization and tracking 相似文献
20.
A conceptual framework in which the model-based, space-time acoustic signal processing procedure known as matched field processing (MFP) can be handled in a consistent manner is established. A framework for strong-signal MFP based on standard statistical estimation theory, in which MFP is regarded as essentially an estimation problem in the strong-signal regime, is developed. In the weak-signal case, the necessary requirement of detection dictates that MFP then be considered a joint detection-estimation task. It is demonstrated that, generally, MFP is essentially a space-time processing problem rather than simply an array processing (spatial processing only) procedure. An overview of the processing schemes used to date in MFP is given, showing how these methods relate to the optimal space-time structure. Weak-signal detection and estimation scenarios relevant to MFP are then noted. Present methods for dealing with the inherent instability of MFP algorithms (mismatch) are discussed. The current status of MFP is summarized, and recommendations for future research are made 相似文献