首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The determination of the oxidation states of copper and iron in sulfides, and chalcopyrite (CuFeS2) in particular, using 2p X-ray photoemission spectroscopy (XPS) and L2,3-edge X-ray absorption spectroscopy (XAS) is revisited. Reassessment of the published spectra derived by these methods produces consistent results and reveals the ‘d count’ in the copper compounds to be intermediate between d9 and d10. Nevertheless, these covalent copper compounds can be divided into those nominally monovalent and those nominally divalent. The Fe L2,3-edge XAS of chalcopyrite, along with Mössbauer data, confirm the presence of high-spin Fe3+. Chalcopyrite, despite recent published reports to the contrary, clearly belongs to the monovalent copper class.  相似文献   

2.
Fe L-, S L-, and O K-edge X-ray absorption spectra of natural monoclinic and hexagonal pyrrhotites, Fe1-xS, and arsenopyrite, FeAsS, have been measured and compared with the spectra of minerals oxidized in air and treated in aqueous acidic solutions, as well as with the previous XPS studies. The Fe L-edge X-ray absorption near-edge structure (XANES) of vacuum-cleaved pyrrhotites showed the presence of, aside from high-spin Fe2+, small quantity of Fe3+, which was higher for a monoclinic mineral. The spectra of the essentially metal-depleted surfaces produced by the non-oxidative and oxidative acidic leaching of pyrrhotites exhibit substantially enhanced contributions of Fe3+ and a form of high-spin Fe2+ with the energy of the 3d orbitals increased by 0.3–0.8 eV; low-spin Fe2+ was not confidently distinguished, owing probably to its rapid oxidation. The changes in the S L-edge spectra reflect the emergence of Fe3+ and reduced density of S s–Fe 4s antibonding states. The Fe L-edge XANES of arsenopyrite shows almost unsplit eg band of singlet Fe2+ along with minor contributions attributable to high-spin Fe2+ and Fe3+. Iron retains the low-spin state in the sulphur-excessive layer formed by the oxidative leaching in 0.4 M ferric chloride and ferric sulphate acidic solutions. The S L-edge XANES of arsenopyrite leached in the ferric chloride, but not ferric sulphate, solution has considerably decreased pre-edge maxima, indicating the lesser admixture of S s states to Fe 3d orbitals in the reacted surface layer. The ferric nitrate treatment produces Fe3+ species and sulphur in oxidation state between +2 and +4.  相似文献   

3.
The Fe L 2,3-edge spectra for a range of natural minerals and synthetic solid solutions have been measured using the technique of parallel electron energy-loss spectroscopy (PEELS) recorded in a transmission electron microscope (TEM). The Fe L 2,3 -edges of the minerals are characterised by two white-line features and exhibit electron energy-loss near-edge structure (ELNES) characteristic of Fe valence state. For divalent iron, the Fe L 3 -edge spectra are dominated by a sharp peak (white-line) at ca. 707.8 eV, followed by a broader and less intense peak at ca. 710.5 eV. The ELNES on the Fe L 3 -edge of trivalent iron consists of a white-line with its maximum at ca. 709.5 eV and a preceeding peak at ca. 708.0 eV. Mineral solid solutions that contain both Fe2+ and Fe3+ exhibit an Fe L 3 -edge shape that is composed of Fe L 3 -edges from the respective Fe2+- and Fe3+-bearing end members. The integral Fe L 2,3 -edge white-line intensity ratios I(L 3 )/I(L 2 ) show clear differences for Fe2+ and Fe3+. We demonstrate the feasibility of quantification of the ferrous/ferric ratio in minerals by determining the integral Fe L 2,3 -edge white-line intensity ratios I(L 3 )/I(L 2 ) as a function of the ferric iron concentration resulting in an universal curve within the experimental errors. The application of the universal curve combined with the high spatial resolution using the PEELS/TEM allows the quantification of the ferric iron concentration on a scale down to 10 nm, which is illustrated from a sample of ilmenite containing hematite exsolution lamellae that shows different Fe L 2,3 -edge shapes consistent with variations in the Fe2+-Fe3+ ratio over distances of ca. 100 nm. Received: 30 July 1997 / Revised, accepted: 26 October 1997  相似文献   

4.
An X-ray absorption spectroscopy (XAS) study of the Fe local environment in natural amethyst (a variety of α-quartz, SiO2) has been carried out. Room temperature measurements were performed at the Fe K-edge (7,112 eV), at both the X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) regions. Experimental results were then compared with DFT calculations. XANES experimental spectra suggest Fe to occur mainly in the trivalent state, although a fraction of Fe2+ is identified. EXAFS spectra, on the other hand, reveal an unusual short distance for the first coordination shell:  = 1.78(2) Å, the coordination number being 2.7(5). These results allow to establish that Fe replaces Si in its tetrahedral site, and that numerous local distortions are occurring as a consequence of the presence of Fe3+ variably compensated by protons and/or alkaline ions, or uncompensated. The formal valence of Fe, on the basis of both experimental and DFT structural features, can be either 4+ or 3+. Taking into account the XANES evidences, we suggest that Fe mainly occurs in the trivalent state, compensated by protons, and that a minor fraction of Fe4+ is stabilised by the favourable local structural arrangement.  相似文献   

5.
Estimation of Fe3+/ΣFe ratios in materials at the submicrometre scale has been a long-standing challenge in the Earth and environmental sciences because of the usefulness of this ratio in estimating redox conditions as well as for geothermometry. To date, few quantitative methods with submicrometric resolution have been developed for this purpose, and most of them have used electron energy-loss spectroscopy carried out in the ultra-high vacuum environment of a transmission electron microscope (TEM). Scanning transmission X-ray microscopy (STXM) is a relatively new technique complementary to TEM and is increasingly being used in the Earth sciences. Here, we detail an analytical procedure to quantify the Fe3+/ΣFe ratio in silicates using Fe L2,3-edge X-ray absorption near edge structure (XANES) spectra obtained by STXM, and we discuss its advantages and limitations. Two different methods for retrieving Fe3+/ΣFe ratios from XANES spectra are calibrated using reference samples with known Fe3+ content by independent approaches. The first method uses the intensity ratio of the two major peaks at the L3-edge. This method allows mapping of Fe3+/ΣFe ratios at a spatial scale better than 50 nm by the acquisition of 5 images only. The second method employs a 2-eV-wide integration window centred on the L2 maximum for Fe3+, which is compared to the total integral intensity of the Fe L2-edge. These two approaches are applied to metapelites from the Glarus massif (Switzerland), containing micrometre-sized chlorite and illite grains and prepared as ultrathin foils by focused ion beam milling. Nanometre-scale mapping of iron redox in these samples is presented and shows evidence of compositional zonation. The existence of such zonation has crucial implications for geothermometry and illustrates the importance of being able to measure Fe3+/ΣFe ratios at the submicrometre scale in geological samples.  相似文献   

6.
Fracture surfaces of a natural carrollite specimen have been characterised by synchrotron and conventional X-ray photoelectron spectroscopy and near-edge X-ray absorption spectroscopy. For the synchrotron X-ray measurements, the mineral surfaces were prepared under clean ultra high vacuum and were unoxidised. The characterisation was undertaken primarily to establish unequivocally the oxidation state of the Cu in the mineral, but also to obtain information on the electronic environments of the Co and S, and on the surface species. Experimental and simulated Cu L2,3-edge absorption spectra confirmed an oxidation state of CuI, while Co 2p photoelectron and Co L2,3 absorption spectra were largely consistent with the CoIII established previously by nuclear magnetic resonance spectroscopy. S 2p photoelectron spectra provided no evidence for S to be present in the bulk in more than one state, and were consistent with an oxidation state slightly less negative than S-II. Therefore it was concluded that carrollite can be best represented by CuICoIII2(S4)-VII. The CuI oxidation state is in agreement with that expected for Cu tetrahedrally coordinated by S, but is in disagreement with the CuII deduced previously from some magnetic, magnetic resonance and Cu L-edge X-ray absorption spectroscopic measurements. A significant concentration of S species with core electron binding energies both lower and higher than the bulk value were formed at fracture surfaces, and these entities were assigned to monomeric and oligomeric surface S species. The density of Cu d states calculated for carrollite differed from that previously reported but was consistent with the observed Cu L3 X-ray absorption spectrum. The initial oxidation of carrollite in air under ambient conditions was confirmed to be congruent, unlike the incongruent reaction undergone by a number of non-thiospinel sulfide minerals.  相似文献   

7.
Metal L2,3, sulfur K and oxygen K near-edge X-ray absorption fine structure (NEXAFS) spectra for chalcopyrite, bornite, chalcocite, covellite, pyrrhotite and pyrite have been determined from single-piece natural mineral specimens in order to assess claims that chalcopyrite should be regarded as CuIIFeIIS2 rather than CuIFeIIIS2, and that copper oxide species are the principal initial oxidation products on chalcopyrite and bornite exposed to air. Spectra were obtained using both fluorescence and electron yields to obtain information representative of the bulk as well as the surface. Where appropriate, NEXAFS spectra have been interpreted by comparison with the densities of unfilled states and simulated spectra derived from ab initio calculations using primarily the FEFF8 code and to a lesser extent WIEN2k. Metal 2p and S 2p photoelectron spectra excited by monochromatised Al Kα X-rays were determined for each of the surfaces characterised by NEXAFS spectroscopy. The X-ray excited Cu LMM Auger spectrum was also determined for each copper-containing sulfide. FEFF8 calculations were able to simulate the experimental NEXAFS spectra quite well in most cases. For covellite and chalcocite, it was found that FEFF8 did not provide a good simulation of the Cu L3-edge spectra, but WIEN2k simulations were in close agreement with the experimental spectra. Largely on the basis of these simulations, it was concluded that there was no convincing evidence for chalcopyrite to be represented as CuIIFeIIS2, and no strong argument for some of the Cu in either bornite or covellite to be regarded as Cu(II). The ab initio calculations for chalcopyrite and bornite indicated that the density of Cu d-states immediately above the Fermi level was sufficient to account for the Cu L3-edge absorption spectrum, however these incompletely filled Cu d-states should not be interpreted as indicating some Cu(II) in the sulfide structure. It was also concluded that the X-ray absorption spectra were quite consistent with the initial oxidation products on chalcopyrite and bornite surfaces being iron oxide species, and inconsistent with the concomitant formation of copper-oxygen species.  相似文献   

8.
Molecular quantum mechanical calculations have been performed on high-spin ferrous iron tetrahedrally coordinated to sulfur and oxygen, respectively. The molecular orbital energies obtained from the calculations are compared with experimental optical and X-ray emission spectra. Good agreement was found between calculated and experimental spectral transition energies for the optical absorption spectra of Fe2+ in sphalerite, of Fe2+ in FeAl2O4, staurolite and (Zn, Fe)O, and for the FeKβ X-ray emission spectra of FeCr2O4. This both clarified interpretation of the spectra and established the validity of the calculations. Distinct differences occur in the molecular orbital structures of the sulfide and oxide clusters. In the sulfide, the crystal field type (mainly Fe 3d) molecular orbitals lie within the nonbonding (mainly S 3p) orbitais in energy, whereas in the oxide, they lie well above the 02p nonbonding orbitals. This also results in a wider valence band in the oxide than in the sulfide. The crystal field type (Fe 3d) molecular orbitais have more ligand character in the sulfide than the oxide and the chalcophilic properties of iron are partly attributed to this observation.  相似文献   

9.
Iron valence state and local environment in a set of fibrous diamonds from Brazilian and Congolese placers were investigated using X-ray absorption and Mössbauer spectroscopies. It is shown that the diamonds could be divided into two main groups differing in the type of dominant Fe-bearing inclusions. In the first group Fe is mostly trivalent and is present in octahedral coordination; diamonds from the second group contain a mixture of Fe2+ and Fe3+, most likely with Fe2+ in dodecahedral coordination. A few other diamonds contain iron in a more reduced state: The presence of metallic Fe and Fe3O4 is inferred from XAS measurements. Spatially resolved XANES and Mössbauer measurements on polished diamond plates show that in some cases the Fe valence state may change considerably between the core and rim, whereas in other cases Fe speciation and valence remain constant. It is shown that Fe valence does not correlate with water and/or carbonate content or ratio, suggesting that iron is a minor element in the growth medium of fibrous diamonds and plays a passive role. This study suggests that, when present, evolution of the C isotopic composition with diamond growth is largely due to changes in chemistry of the growth medium and not due to variations of fO2.  相似文献   

10.
Sulfur K-edge x-ray absorption spectra (XANES and EXAFS) and L-edge XANES of sphalerite (ZnS), chalcopyrite (CuFeS2) and stannite (Cu2FeSnS4) have been recorded using synchrotron radiation. The K- and L-edge XANES features are interpreted using a qualitative MO/energy band structure model. The densities of unoccupied states at the conduction bands of sphalerite, chalcopyrite and stannite are determined using S K- and L-edge XANES features (up to 15 eV above the edge), combined with published metal K-edge XANES. The SK- and L-edge XANES also indicate that, for sphalerite, the Fe2+ 3d band at the fundamental gap has little or no bonding hybridization with S 3p and S 3s orbitals; for chalcopyrite, the Cu+ 3d and Fe3+ 3d bands have strong mixing with S 3p and S 3s states, while for stannite the Cu+ 3d band strongly hybridizes with S 3p and S 3s orbitals, but the Fe2+ 3d band does not. The post-edge XANES features (15–50 eV above the edge) of sphalerite, chalcopyrite and stannite are similar. These features are related to the tetrahedral coordination of sulfur in all these structures, and interpreted by a multiple scattering model. The resonance energies from both the K-edge and L-edge XANES for these minerals are well correlated with reciprocal interatomic distances and lattice spaces. Sulfur K-edge EXAFS analyses using Fourier transform and curve fitting procedures are presented. Comparison of the structural parameters from EXAFS with x-ray structure data shows that the first shell bond distances (BD) from EXAFS are usually accurate to ±0.02 Å, and that coordination numbers (CN) are generally accurate to ±20 percent. For sphalerite, EXAFS analysis yields the structure parameters for the first three neighbour shells around a sulfur atom; the BD and CN even for the third shell are in close agreement with the x-ray structure, and the Debye-Waller term decreases from the first shell to the third shell. It is shown that sphalerite (ZnS) is a good model compound for EXAFS analysis of sulfur in chalcogenide glasses and metalloproteins.  相似文献   

11.
  相似文献   

12.
Synthetic Fe3+-melilites containing NaCaFe3+-Si2O7-, Ca2Fe3+AlSiO7- or Sr2Fe3+AlSiO7-components have been studied by 57Fe Mössbauer spectroscopy. The spectrum of åkermanite containing an NaCaFe3+Si2O7-component consists of one doublet identified to belong to Fe3+ in T1 sites. The spectra of åkermanite and gehlenite containing Ca2Fe3+ AlSiO7- or Sr2Fe3+ AlSiO7-component consist of two doublets. The inner and outer doublets are identified to belong to Fe3+ in the less distorted T1 and that in the more distorted T2 sites, respectively. The area ratios of the spectra show that the site occupancy of Fe3+ (T1) in gehlenite is less than that in åkermanite in which the distribution of Fe3+ in T1 and T2 sites is apparently random. The different distributions can be explained in terms of competition between minimizing the deficiency in the electrostatic valence and the preference of Al for T1 sites which the isomer shift measurements show to be more ionic.  相似文献   

13.
The mixed valence iron silicate ilvaite, CaFe 2 2+ Fe3+Si2O8(OH), displays electron delocalization associated with Fe2+→Fe3+ charge transfer as observed by Mössbauer spectroscopy. Previous studies report the observation of an ‘electron hopping phenomenon’ with resolution of discrete valence states below 320 K. Mössbauer spectra of a suite of naturally occurring ilvaites were recorded over a temperature range, 80 K to 575 K. Five quadrupole doublets were resolved by computer fitting and assigned to Fe2+(A), Fe2+(B), Fe3+(A), and Fe2+(A)→Fe3+(A)‖c and ⊥c. Contrary to prior work, doublets associated with electron delocalization are resolved at 80 K and preclude the use of a Verwey-type order-disorder model. We propose a thermal activation model and discuss its criteria from molecular orbital and mineralogical viewpoints.  相似文献   

14.
We calculated the forsterite Mg K-edge and the fayalite Fe K-edge X-ray absorption spectra both for the M 1 and M 2 sites and for the overall edge by using the one-electron multiple-scattering theory. The validity of the theoretical model is well illustrated by comparison of calculations with experimental data at the Mg K-edge of MgO (periclase) and at the Mg and Fe K-edges spectra of forsterite and fayalite. Starting from these results at room conditions, we calculated the Mg and Fe K-edges X-ray absorption spectra of forsterite and fayalite at low and high temperatures and at high pressures as well. Variations of fine structures occur mostly in the intermediate multiple scattering (IMS) regions and as a result of the applied pressure. In order to demonstrate the capability of XAS to lead to deeper knowledge of structure relevant to Earth's upper mantle we also attempted calcuating the high-P edge for Fe 2+ in low-spin using a different occupation of valence electrons. If a change in spin state really occurs in fayalite, our simple model shows that XAS would evidence it easily even with low resolution.  相似文献   

15.
Polarized S K- and L-edge, Mo L3- and L2-edge x-ray absorption near-edge structure (XANES) of natural molybdenite (2H-MoS2) have been measured with synchrotron radiation. These results are qualitatively interpreted using the energy band model of molybdenite and provide important information on the unoccupied states of molybdenite. The valence band (VB) maximum of molybdenite is characterized by fully occupied Mo 4dz 2, and the conduction band (CB) minimum of molybdenite is characterized by unoccupied Mo 4d states. The unoccupied Mo 4d band is split into two sub-bands, designated as t 2g – /t 2g + and e g – /e g + sets. Although the relative energy of these two sets are difficult to be evaluated, probably the former has the lower energy than the latter, both two sets have the combination wave functions of the other unoccupied Mo 4d components, rather than the simple 4dx 2 — y2 and 4dxy states. The unoccupied Mo 4d sub-bands contain significant DOS of both S 3 p- and 3 s-like states, indicating strong hybridization with S 3s and 3 p states. In the lower energy sub-band, the DOS of the S pz- and px,y-like states are very similar. However, in the higher energy sub-band, the DOS of the S 3 px,y-like state is lower than that of the S 3pz state. Polarized S K-edge XANES also reveal the features of antibonding S pz- and px,y-like states in molybdenite. The feature assigned to the S 3 pz-like states is stronger and sharper, and shifts to lower energy by about 2 eV relative to that for the S 3 px,y-like states.  相似文献   

16.
The dependence of the electronic and the crystallographic structure on temperature of synthetic Mnbearing ilvaites CaFe2+ 2-xMn2+ xFe3+ [Si2O7/O/OH] with 0≤x≤0.19 has been investigated. The change of the electronic structure was studied by 57Fe Mössbauer spectroscopy. The spectra show an increasing valence fluctuation rate between Fe2+ and Fe3+ in the double chain of edge-sharing octahedra with increasing temperature resulting in a mixed valent state of iron. The valence fluctuation rate is distinctly increased by the Mnsubstitution. The temperature of the crystallographic phase transition T x as studied by a high temperature Guinier method is distinctly lowered by the Mn-substitution (x = 0.0, T x=390K; x = 0.12, T x =370K; x = 0.19, T x=295K). The reasons for this behaviour are discussed in terms of Fe2 +, Fe3 + cation order-disorder, electronic relaxation rate, and relaxation of the lattice. In the monoclinic phase there is electron hopping between Fe2 +, Fe3 + pairs whereas in the orthorhombic phase there is extended electron delocalization via a narrow, d-band mechanism.  相似文献   

17.
Energy gaps and electrical conductivities in the ferrous silicates, Fe2SiO4 and FeSiO3, depend primarily on Fe-O bonding and may be studied by ultraviolet and soft X-ray spectroscopy. We have measured FeLII–III X-ray band spectra under conditions of “minimal” (I4, at 4.0 keV) and “high” (I10, at 10.0 keV) self absorption to determine 3d orbital energy levels, to delineate d states in the valence band, and to construct band gap models. Absorption spectra, I4/I10, were computed to determine vacant orbital levels in the gap. A difference function (I4–I10) has been proposed to identify X-radiation at photon energies above the measured LIII absorption edge, including high-energy, double-vacancy satellites and radiative transitions involving the anti-parallel (spin-down) d 6 electron in the ground state. The proposed band gap model for Fe2SiO4 is consistent with that of Nitsan and Shankland (1976), including an intrinsic transition of 6.5 eV and an energy gap of 7.8 eV. The 3d orbital energy level electronic structures are in general agreement with levels computed by Tossell et al. (1974) for [FeO6]10? in FeO using an SCF Xα cluster MO method. A high-energy, double-vacancy satellite was found at ～710.7 eV, and is presumed to originate from an LIIIMII,III initial state. The intensity of these satellites for the ferrous silicates and other iron compounds, and corresponding Fe LII/LIII intensity ratios are correlated with differences in band gap magnitudes and gap structure. Fe LII/LIII intensity ratios are not well correlated with iron oxidation state.  相似文献   

18.
X-ray photoelectron and absorption spectra have been obtained for natural specimens of cubanite and compared with the corresponding spectra for chalcopyrite. Synchrotron X-ray photoelectron spectra of surfaces prepared by fracture under ultra-high vacuum revealed some clear differences for the two minerals, most notably those reflecting their different structures. In particular, the concentration of the low binding energy S species formed at cubanite fracture surfaces was approximately double that produced at chalcopyrite surfaces. However, the core electron binding energies for the two S environments in cubanite were not significantly different, and were similar to the corresponding values for the single environment in chalcopyrite. High binding energy features in the S 2p and Cu 2p spectra were not related to surface species produced either by the fracture or by oxidation, and most probably arose from energy loss due to inter-band excitation. Differences relating to the Fe electronic environments were detectable, but were smaller than expected from some of the observed physical properties and Mössbauer spectroscopic parameters for the two minerals. X-ray absorption and photoelectron spectra together with the calculated densities of states for cubanite confirmed an oxidation state of CuI in the mineral. It was concluded that the best formal oxidation state representation for cubanite is CuI(Fe2)VS 3 ?II .  相似文献   

19.
Iron-57 resonant absorption Mössbauer spectroscopy was used to describe the redox relations and structural roles of Fe3+ and Fe2+ in meta-aluminosilicate glasses. Melts were formed at 1500 °C in equilibrium with air and quenched to glass in liquid H2O with quenching rates exceeding 200 °C/s. The aluminosilicate compositions were NaAlSi2O6, Ca0.5AlSi2O6, and Mg0.5AlSi2O6. Iron oxide was added in the form of Fe2O3, NaFeO2, CaFe2O4, and MgFe2O4 with total iron oxide content in the range ∼0.9 to ∼5.6 mol% as Fe2O3. The Mössbauer spectra, which were deconvoluted by assuming Gaussian distributions of the hyperfine field, are consistent with one absorption doublet of Fe2+ and one of Fe3+. From the area ratios of the Fe2+ and Fe3+ absorption doublets, with corrections for differences in recoil-fractions of Fe3+ and Fe2+, the Fe3+/ΣFe is positively correlated with increasing total iron content and with decreasing ionization potential of the alkali and alkaline earth cation. There is a distribution of hyperfine parameters from the Mössbauer spectra of these glasses. The maximum in the isomer shift distribution function of Fe3+, δFe3+, ranges from about 0.25 to 0.49 mm/s (at 298 K relative to Fe metal) with the quadrupole splitting maximum, ΔFe3+, ranging from ∼1.2 to ∼1.6 mm/s. Both δFe3+ and δFe2+ are negatively correlated with total iron oxide content and Fe3+/ΣFe. The dominant oxygen coordination number Fe3+ changes from 4 to 6 with decreasing Fe3+/ΣFe. The distortion of the Fe3+-O polyhedra of the quenched melts (glasses) decreases as the Fe3+/ΣFe increases. These polyhedra do, however, coexist with lesser proportions of polyhedra with different oxygen coordination numbers. The δFe2+ and ΔFe2+ distribution maxima at 298 K range from ∼0.95 to 1.15 mm/s and 1.9 to 2.0 mm/s, respectively, and decrease with increasing Fe3+/ΣFe. We suggest that these hyperfine parameter values for the most part are more consistent with Fe2+ in a range of coordination states from 4- to 6-fold. The lower δFe2+-values for the most oxidized melts are consistent with a larger proportion of Fe2+ in 4-fold coordination compared with more reduced glasses and melts.  相似文献   

20.
The Mössbauer spectra of ilvaite CaFe 2 2+ Fe3+[Si2O7/O/OH] and their temperature dependence between 298 K and 455 K can be satisfactorily least-squares fitted by a superposition of the resonances for Fe2+(8d), Fe3+(8d) and Fe2+(4c). The relative areas under the three resonances are nearly equal and vary only weakly with temperature. No additional resonances or line broadenings have to be introduced, if we assume that the hyperfine interactions of Fe2+(8d) and Fe3+(8d) fluctuate between their values due to electron hopping between the iron ions at the 8d sites. Hopping can be assumed to occur homogeneously among nearly equivalent sites. The fluctuation rate is described by an Arrhenius law with a pre-exponent of about 9 × 108 s?1 and an activation energy of 0.11 eV indicating non-adiabatic hopping. In addition to the intersite hopping process, the strong decrease of the quadrupole splitting and the isomer shift of Fe2+(8d) between 298 K and 360 K suggests the occurrence of intrinsic charge delocalization from Fe2+(8d) which does not involve the neighbouring Fe3+(8d) ions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号