首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Based on a two dimensional linear water wave theory, the boundary element method (BEM) is developed and applied to study the heave and the sway problem of a floating rectangular structure in water to finite depth with one side of the boundary is a vertical sidewall and the other boundary is an open boundary. Numerical results for the added mass and radiation damping coefficients are presented. These coefficients are not only depend on the submergence and the width of the structure, but also depend on the clearance between structure and sidewall. Negative added mass and sharp peaks in the damping and added mass coefficients have been found when the clearance with a value close to integral times of half wave length of wave generated by oscillation structure. The important effect of the clearance on the added mass and radiation damping coefficients are discussed in detail. An analytical solution method is also presented. The BEM solution is compared with the analytical solution, and the comparison shows good agreement.  相似文献   

2.
The hydroelastic responses of a submerged horizontal solid/porous plate attached at the front of a very large rectangular floating structure(VLFS) under wave action has been investigated in the context of linear water wave theory. Darcy's law is adopted to represent energy dissipation in pores. It is assumed that the porous plates are made of material with very fine pores so that the normal velocity across the perforated porous is linearly associated with the pressure drop. In the analytic method, the eigenfunction expansion-matching method(EEMM) for multiple domains is applied to solve the hydrodynamic problem and the elastic equation of motion is solved by the modal expansion method. The performance of the proposed submerged horizontal solid/porous plate can be significantly enhanced by selecting optimal design parameters, such as plate length, horizontal position, submerged depth and porosity. It is concluded that good damping effect can be achieved through installation of solid and porous plate.Porous plate has better damping effect at low frequencies, while solid plate has better damping effect at high frequencies. The optimal ratio of plate length to water depth is 0.25-0.375, and the optimal ratio of submerged depth to water depth is 0.09-0.181.  相似文献   

3.
合理的刚度和潜深设计可以使升沉水平板获得优异的消浪性能。基于考虑流体黏性的二维不可压缩Navier-Stokes方程,以高阶紧致插值CIP(constrained interpolation profile)方法求解方程对流项,采用VOF(volume of fluid)方法重构自由液面,构建二维数值波浪水槽。采用试验数据验证模型后,研究孤立波与升沉水平板相互作用,分析相对刚度K*、相对潜深d/h、相对波高H/h对于升沉板的消浪性能和运动响应的影响,揭示升沉板对孤立波的消浪机理。研究表明:在孤立波通过时,升沉板会经历一个先上升后下降的运动,随后非线性自由振动,板下方水体近似均匀流动,且水流的垂向流动与板的垂荡方向一致;升沉板主要通过不对称涡旋脱落、浅水变形、波浪反射与辐射波转化等方式消耗孤立波能量;一定条件下,采用最优相对刚度K*=4.0和最优相对潜深d/h=0.52可以取得良好的消浪效果,此时透射系数最小,同时升沉板的运动响应在合理的范围内。  相似文献   

4.
The radiation problem for two parallel-spaced cylinders is studied. The solution is expressed explicitly in terms of well-behaved convergent series with elementary functions, which are convenient for numerical computation and readily applicable for two-dimensional two-body potential problems. The added mass and damping coefficients together with the phase angles of radiated wave potentials for the forced heave and sway motions of two identical submerged cylinders are presented. The results are useful for determination of the hydrodynamic properties of multi-hull semi-submersibles. In view of the close relationship between a radiation and a scattering problem, the application of the results to the problem of energy extraction from water waves is also noted.  相似文献   

5.
Added mass and damping of a vertical cylinder in finite-depth waters   总被引:1,自引:0,他引:1  
A comprehensive set of theoretical added masses and wave damping data for a floating circular cylinder in finite-depth water is presented. The hydrodynamic problem is solved by matching eigen functions of the interior and exterior problems. The resulting infinite system is solved directly and found to have excellent truncation characteristics. Added mass and damping are given for heave, sway, and roll motion, as well as coupling coefficients for sway and roll. It is shown that the heave added mass is logarithmic singular and the damping approaches a constant in the low-frequency limit. Transition of the behaviour in finite-depth water to deep water is also discussed.  相似文献   

6.
In previous work, the problem of optimizing the shape of a thin floating plate to maximize radiation damping was investigated. The plate was modelled with zero draft and floated on the surface of an irrotational, incompressible ocean of infinite extent. For simplicity, only rigid heave motions were considered and the damping coefficient at one wave number was maximized. In the present work, the hydroelastic properties of the optimized plate are determined and compared with those of circular and square plates. The added mass, damping, and diffraction force coefficients in each mode are determined as a function of wave number. The amplitude responses of the plate deflection and bending moments are also presented. The finite element method is used to determine the vibration mode shapes and the flow problem is analysed using the Chen and Mei variational principle wherein the potential field inside a hemisphere surrounding the plate is represented using a spherical harmonic expansion and matched on the hemisphere to an outer field described by distributing sources on the hemisphere.  相似文献   

7.
两层流体中矩形箱浮体的附加质量和阻尼系数   总被引:1,自引:2,他引:1  
研究了两层流体中矩形箱浮体的辐射问题。基于特征函数匹配理论,针对矩形箱浮体的三种振荡运动模式(横荡、垂荡和横摇),建立两层流体中矩形箱浮体辐射势的求解方法,导出矩形箱浮体附加质量和阻尼系数的计算公式。对所建立的求解模型进行了数值计算分析,结果表明在矩形箱浮体的某个振荡频率范围内,流体的分层效应对其附加质量和阻尼系数有显著影响的。  相似文献   

8.
基于映像理论将部分反射直墙前物体的散射问题,等效于开敞水域中原物体的散射和关于直墙映像体散射的线性叠加进行求解。采用高阶边界元方法建立了部分反射直墙前二维任意形状物体波浪绕射和辐射问题的数值分析模型,通过与已发表的海底方箱和淹没圆柱结果的对比验证了数值模型的准确性。应用该模型研究了直墙反射系数幅值及相位、方箱与墙间距离等参数对水面方箱上波浪激振力、附加质量和辐射阻尼的影响。结果表明:直墙反射系数幅值越大,波浪激振力、附加质量和辐射阻尼的波动越大,附加质量在一些频率下出现负值;相位角的变化会改变波浪激振力、附加质量和辐射阻尼曲线的偏移,在低频区对升沉附加质量有显著影响;方箱距离直墙越远,方箱上的波浪激振力、附加质量和辐射阻尼随波数振荡的频率越快,峰值频率向低频侧移动。  相似文献   

9.
In this paper, an exact analytical method is developed for the problem of wave radiation by a uniform cylinder in front of a vertical wall. Based on the image principle, the hydrodynamic problem of a cylinder in front of a vertical wall is transformed into the equivalent problem of double cylinders in unbounded fluid domain. Consequently, an analytical method of eigenfunction expansion is adopted to calculate the radiation of the cylinder due to the motion in surge, sway, roll and pitch, respectively. Moreover, numerical analysis has been carried out in detail in order to discuss the influences of the distance between the cylinder and the vertical wall and water depth on the added mass and radiation damping of the cylinder. It is shown that added mass and damping of the cylinder in front of a vertical wall are evidently different from those in case of the cylinder in unbounded fluid domain from the numerical results. It is also found that the added mass and radiation damping oscillate with wave number, and the oscillating frequency increases with the increasing of the distance between the cylinder and the wall.  相似文献   

10.
随机波浪下Truss Spar平台垂荡运动时域分析   总被引:4,自引:2,他引:2  
研究Truss Spar平台在随机波浪下的垂荡运动特性。采用ITTC双参数谱,考虑绕射作用,数值计算了平台所受的随机波浪力。利用已有的水动力试验和数值模拟结果及Morison方程,估计了Truss Spar平台垂荡方向的附加质量和粘滞阻尼大小。考虑非线性阻尼和瞬时波面的影响,运用Runge-Kutta数值迭代算法,比较了不同随机波浪参数对平台运动响应的影响,特别是波浪特征周期接近垂荡固有周期时。结果表明,当波浪特征周期接近平台垂荡固有周期时,平台产生大幅垂荡运动,频域的运动分析结果比时域结果偏小。  相似文献   

11.
两层流体中振荡水平圆柱潜体水动力特性   总被引:1,自引:1,他引:1  
研究了有限深两层流体中水平圆柱潜体的振荡辐射问题。在线性势流理论框架内,建立求解辐射势的多极展开理论,提出附加质量和阻尼系数的计算方法,进行了数值计算分析,并且与均匀流中的情况进行比较。结果表明,在圆柱潜体的某个振荡频率范围内,流体的分层效应对其附加质量和阻尼系数是有重要影响的。同时,对水平圆柱潜体振荡产生的自由面和内界面波动特性进行了数值分析。  相似文献   

12.
The free motions in waves of submerged vehicles with a spherical hull from but different metacentric heights are sought. The problem is analysed by considering the submerged vehicle as a neutrally buoyant sphere. The solutions to two independent problems, namely the radiation problem and the diffraction problem, are required. Nondimensional parameters known as the added mass, damping and diffraction coefficients for neutrally buoyant spheres are derived and computed values of these coefficients are presented in tabulated form. The responses of surge, heave and pitch are explicitly expressed by these coefficients and the metacentric height of the submarine. A spherical submarine is practically motionless relative to the particle movement of waves except at the vicinity of reasonant frequency, which is governed by the value of metacentric height.  相似文献   

13.
Design analysis of a truss pontoon semi-submersible concept in deep water   总被引:3,自引:0,他引:3  
Truss pontoon semi-submersible (TPS) is a new offshore structure concept in industry, where a truss spar is used to create the added mass by the heave plates. In the present paper, the effect of the heave plates on the vertical motion of the floating structure is demonstrated. A TPS is analyzed by utilizing the linear diffraction theory as well as the linear part of the Morison equation. The close agreement of the analysis results with the experimental results suggests that the simplified Morison equation can be used for the present analysis without sacrificing the quality of the results. However, good engineering judgment is required for estimating the values of the hydrodynamic coefficients as well as the amount of damping introduced in the structure. It is also found that the heave plates indeed introduce large added mass and considerable damping in the system motion in the vertical direction such that the resonant oscillation becomes less of a problem. This suggests that the TSP concept may have merits as a heave-controlled floating production structure in the deepwater development.  相似文献   

14.
The hydrodynamic characteristics of heave plates with different form edges of Truss Spar Platform are studied in this paper.Numerical simulations are carried out for the plate forced oscillation by the dynamic mesh method and user defined functions of FLUENT.The added mass coefficient and the damping coefficient of heave plate with tapering condition and the chamfer condition are calculated.The results show that,in a certain range,the hydrodynamic performance of heave plate after being tapered is better.  相似文献   

15.
The interaction of waves with submerged two-dimensional circular cylinder groups is investigated. Linear wave theory is used in the analysis and the viscous effects are neglected. The boundary value problem for the wave potential is based on Green's theorem, and the resulting integral equation is solved numerically. The added mass and damping coefficients in sway, heave and roll of oscillating twin-cylinders and the total wave forces on a fixed cylinder in a group are examined. The effects of the free surface, and particularly, the spacing of the cylinders are shown. The numerical results are tested against known solutions. Results for a two-cylinder configuration at different orientations are presented. It is found that the interaction between closely spaced cylinders is large. The spacings at which the interaction effect is important are shown graphically.  相似文献   

16.
The motion and the drift force of a floating OWC (oscillating water column) wave energy device in regular waves are studied taking account of the oscillating surface-pressure due to the pressure drop across the duct of the air chamber. The potential problem inside the chamber is formulated by making use of the Green integral equation associated with the Rankine-type Green function while the outer problem with the Kelvin-type Green function. The added mass, wave damping and excitation coefficients as well as the motion and drift force of the OWC device are calculated for various values of parameter related to the pressure drop.  相似文献   

17.
《Applied Ocean Research》2005,27(4-5):224-234
The modified scaled boundary finite-element method (SBFEM), keeping the advantages of the original SBFEM, eliminates the restriction of the scaling center location so that this approach can solve two-dimensional problems with parallel side-faces. In this paper, the modified SBFEM is applied to solutions of two types of problems—wave diffraction by a single and twin surface rectangular obstacles and wave radiation induced by an oscillating mono-hull and twin-hull structures in a finite depth of water. For wave diffraction problems, numerical results agree extremely well with the analytic solution for the single obstacle case and other numerical results of a different approach for the twin obstacle case. For wave radiation problems, the particular solutions to the scaled boundary finite-element equation are presented for cases of heave, sway and roll motions. The added mass and damping coefficients for heave, sway and roll motions of a two-dimensional rectangular container are computed and the numerical results are compared with those from independent analytical solution and numerical solution using the boundary element method (BEM). It is found that the SBFEM method achieves equivalent accuracy to the conventional BEM with only a few degrees of freedom. In the last example, wave radiation by a two-dimensional twin-hull structure is analyzed. Comparisons of the results with those obtained using conventional Green's function method (GFM) demonstrate that the method presented in this paper is free from the irregular frequency problems.  相似文献   

18.
提出了一种将波浪中倾斜板问题等效化简为波浪中水平板单元组的方法,该方法建立在使用分离变量法求解水工结构边值问题的基础上,并使用伽辽金法精确求解连续边界条件,确定考虑衰减波态的速度势函数,从而求解没水倾斜板结构的消波性能。等效化简法计算精度于边界元法相当,且计算单元数量少、开销低。基于二维线性势波理论,对没水倾斜板式防波堤消波性能分析显示,没水板的倾斜角度、没水深度与板长是结构消波性能的控制因素:没水倾斜板防波堤的消波性能优于没水水平板防波堤的消波性能,随着没水板结构的倾斜角度增大,没水倾斜板结构的波浪透射系数显著减小,且长板优于短板,浅板优于深板;与前人的水槽实验对比显示,相对没水深度与波陡影响结构的消波性能,且波陡造成的波浪破碎贡献了显著的波能消耗。该结论对板式防波堤的结构配置、优化设计有重要意义。  相似文献   

19.
This paper is concerned with the hydroelastic analysis of a pontoon-type, circular, very large floating structure (VLFS) with a horizontal submerged annular plate attached around its perimeter. The coupled fluid–structure interaction problem may be solved by using the modal expansion method in the frequency domain. It involves, firstly, the decomposition of the deflection of a circular Mindlin plate with free edges into vibration modes that are obtained analytically. Then the hydrodynamic diffraction and radiation forces are evaluated by using the eigenfunction expansion matching method which can also be done in an exact manner. The hydroelastic equation of motion is solved by the Rayleigh–Ritz method for the modal amplitudes, and then the modal responses are summed up to obtain the total response. The effectiveness of the attached submerged annular plate in reducing the motion of VLFS has been confirmed by the analysis.  相似文献   

20.
The purpose of this paper is to validate a new method that can be used by offshore platform designers to estimate the added mass and hydrodynamic damping coefficients of potential Tension Leg Platform hull configurations. These coefficients are critical to the determination of the platform response particularly to high frequency motions in heave caused by sum-frequency wave forcing i.e. “springing”. Previous research has developed the means by which offshore platform designers can extrapolate anticipated full-scale hydrodynamic coefficients based on the response of individual model scale component shapes. The work presented here further evaluates the component scaling laws for a single vertical cylinder and quantifies the effects due to hydrodynamic interaction. Hydrodynamic interaction effects are established through a direct comparison between the superposition of individual hull component coefficients and those evaluated directly from complete hull configuration models. The basis of this comparison is established by the experimental evaluation of the hydrodynamic coefficients for individual hull components as well as partial and complete platform models. The results indicate that hydrodynamic interaction effects between components are small in heave, and validate component scaling and superposition as an effective means for added mass and damping coefficient estimation of prototype platforms. It is found that the dependency of damping ratio with KC for a TLP is almost identical to that of a single column, thus offering a scaling methodology for prototype damping ratio values.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号