首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 281 毫秒
1.
Digital elevation models (DEMs) are widely relied upon as representations of the Earth's topographic morphology. The most widely used global DEMs available are ETOPO5, TerrainBase and JGP95E at a 5‐arc‐minute spatial resolution, and the GTOPO30 and GLOBE (version 1) global DEMs at a 30‐arc‐second spatial resolution. This paper presents the results of intercomparisons of these global DEMs over Australia, and with the GEODATA 9‐arc‐second DEM (version 1) of Australia. These DEMs were also compared to an independently produced, altimeter‐derived orthometric height database. This allows not only a totally independent assessment of the quality of these different DEMs over Australia, but also an insight into the ERS‐1 radar altimeter's ability to measure orthometric heights on land. The results of all these comparisons reveal large differences among the DEMs, with the greatest difference between JGP95E and ETOPO5 (mean 49 m, standard deviation ±274 m). The comparison with the altimeter‐derived database shows good agreement with the version 1 GEODATA DEM (mean 2 m, standard deviation ±27 m), thus demonstrating that the altimeter is a viable method for quality assessment of DEMs in lowland regions. A further conclusion is that the representation of the Australian land surface in both the JGP95E and TerrainBase global DEMs is more accurate than the higher resolution GLOBE (version 1) global DEM, even though JGP95E displays a disparity along the 140°E meridian because of the different data sources used in its construction.  相似文献   

2.
In Sahel-Doukkala, which is characterized by lands of a relatively low relief, global DEMs and DEMs generated from digitizing topographic maps, have been the primary source of several multidisciplinary researches. Although these products present a great value of the conducted research, the level of the given accuracy is not sufficient enough for detailed geospatial analysis. These requirements led us to generate a high-resolution DEM as an alternative of available global DEMs or/and DEMs generated from digitizing topographic maps. In this study, we present a workflow to extract high-resolution DEM at 5 m resolution and derived orthoimages from ALOS-PRISM data over Sahel-Doukkala, through photogrammetric techniques, using a variation of GCPs obtained from topographic maps at scale 1:25,000. The accuracy of the generated products is reported according to NSSDA standards. Using ten GCPs, a PRISM-DEM with 3.88 m vertical accuracy and 11.60 m horizontal accuracy, both at 95% confidence level is obtained. This DEM will serve as base dataset for further detailed geospatial analysis and mapping applications in order to identify the relationship between surface parameters and groundwater, and also to assess and understand all factors influencing the development of karst landscapes and consequently subsurface stability in the investigated area.  相似文献   

3.
用InSAR技术提取数字高程模型的研究   总被引：2，自引：1，他引：2  
合成孔径雷达干涉测量(InSAR,Synthetic Aperture Radar)是一种获取地面数字高程模型(DEM)和探测地面微小形变的新技术。这里概述了干涉测量的发展历史,介绍了干涉测量的基本原理,并利用青藏高原库塞湖地区的数据对干涉测量获得地面数字高程模型进行了详细的阐述,最后对生成的地面数字高程模型进行结果分析。  相似文献   

4.
In recent years SAR interferometry has become a widely used technique for measuring altitude and displacement of the surface of the earth. Both these capabilities are highly relevant for landslide susceptibility studies. Although there are many problems that make the use of SAR interferometry less suitable for landslide inventory mapping, it’s use in landslide monitoring and in the generation of input maps for landslide susceptibility assessment looks very promising. The present work attempts to evaluate the usefulness and limitations of this technique based on a case study in the Swiss Alps. Input maps were generated from ERS repeat pass data using SAR interferometry. A land cover map has been generated by image classification of multi-temporal SAR intensity images. An InSAR DEM was generated and a number of maps were derived from it, such as slope-, aspect, altitude- and slope form classes. These maps were used to generate landslide and rockfall susceptibility maps, which give fairly well acceptable results. However, a comparison of the InSAR DEM with the conventional Swisstopo DEM, indicated significant errors in the absolute height and slope angles derived from InSAR, especially along the ridges and in the valleys. These errors are caused by low coherence mostly due to layover and shadow effects. Visual comparison of stereo images created from hillshading maps and corresponding DEMs demonstrate that a considerable amount of topographic details have been lost in the InSAR-derived DEM. It is concluded that InSAR derived input maps are not ideal for landslide susceptibility assessment, but could be used if more accurate data is lacking.  相似文献   

5.
The recent development of digital representation has stimulated the development of automatic extraction of topographic and hydrologic information from digital elevation model input, using geographic information system (GIS) and hydrologic models that integrate multiple databases within a minimal time. The objective of this investigation is to compare the drainage extracted from Shuttle Radar Topography Mission (SRTM) data with the drainage digitized from topographic data (1:50,000) and also to draw attention to the functions of an add-on tool in ArcGIS 9.2 (Arc Hydro v.2) of Kuttiyadi River basin. The analysis reveals that the watershed extracted from the SRTM digital elevation model (DEM) (90 m resolution) is having an area of 668 km2 and that from toposheet is 676 km2. The river mouth in the drainage network from the SRTM DEM is found to be shifted to the northern side from where it actually exists. The drainage network from SRTM DEM at stream threshold 15 (0.0002 % of maximum flow accumulation) is delivering best results than the other threshold value in comparison with the drainage pattern derived from toposheets. The study reveals the importance, reliability, and quaintness of drainage network and watershed derived from the SRTM using the Arc Hydro Tool, an extension for Environmental Systems Research Institute ArcGIS. The advantage of the Arc Hydro Tool is that it would help a novice with little GIS knowledge to run the model to obtain watershed and drainage network.  相似文献   

6.
Interferometric synthetic aperture radar (InSAR) analysis is a radar technique for generating large-area maps of ground deformation using differences in the phase of microwaves returning to a satellite. In recent years, high-resolution SAR sensors have been developed that enable small-scale slope deformation to be detected, such as the partial block movement of a landslide. The L-band SAR (PALSAR-2) is mounted on Advanced Land Observing Satellite-2 (ALOS-2), which was launched on 24 Mar. 2014. Its main improvements compared with ALOS are enhanced resolution of as high as 3 m with a high-frequency recurrence period (14 days). Owing to its high resolution and the use of the L-band, PALSAR-2 can obtain reflective data passing through a tree canopy surface, unlike the other synthetic aperture radars. Therefore, the coherence of InSAR in mountainous forest areas is less likely to decrease, making it advantageous for the extraction of slope movement. In this study, to verify the accuracy of InSAR analysis using PALSAR-2 data, we compared the results of InSAR analysis and the measurement of the displacement in a landslide by global navigation satellite system (GNSS) observation. It was found that the average difference between the displacements obtained by InSAR analysis and the field measurements by GNSS was only 15.1 mm in the slant range direction, indicating the high accuracy of InSAR analysis. Many of the areas detected by InSAR analysis corresponded to the locations of surface changes due to landslide activity. Additionally, in the areas detected by InSAR analysis using multiple datasets, the ground changes due to landslide movement were confirmed by site investigation.  相似文献   

7.
The development of satellite technology is rapidly increasing the evolution of remote sensing. Satellite images give extensive useful information about the land structure that is easily manageable in the process of generating true, high-speed information which allows the forecasting of future environmental and urban planning. Remote sensing comprises active and passive systems. Passive sensors detect natural radiation that is emitted or reflected by the object or surrounding area being observed. Active systems which produce their own electromagnetic energy and their main properties are their ability of collecting data in nearly all atmospheric conditions, day or night. These systems are frequently used to generate a digital elevation model (DEM) because they cover large areas. DEM supplies essential data for applications that are concerned with the Earth’s surface and DEMs derived from survey data are accurate but very expensive and time consuming to create. However, the use of satellite remote sensing to provide images to generate a DEM is considered to be an efficient method of obtaining data. Interferometric Synthetic Aperture Radar (InSAR) is a new geodetic technique for determining earth topography. InSAR measurements are highly dense and they only give information in Line of Sight of Radar. In the study, interferograms were produced from the InSAR images taken by ERS satellites in 1992 and 2007 and we developed the methods to generate a DEM using the InSAR technique and present the results relating to Kayseri Province in Turkey. The accuracy of the DEM derived from the InSAR technique is evaluated in comparison with a reference DEM generated from contours in a topographical map.  相似文献   

8.
The accurate delineation of area plays a key role in the surveying of land change detection and the classification of land covers. In a hydrologic system, the watershed delineation and the detection of the boundaries among watershed is a basic method for performing spatial analyses. After recent advances in image processing and raster-based spatial analysis in geographic information systems, and being easily accessible data via various sources especially through remote sensing, the reliable determination of topographical boundaries possible is possible. Therefore, an integrated approach of data analysis and modeling can accomplish the task of delineation. The main aim in this research is to evaluate the delineation method of watershed boundary using four different digital elevation models (DEM) including advanced spaceborne thermal emission and reflection radiometer (ASTER), Shuttle Radar Topographic Mission (SRTM), digital topography, and topographic maps. In order to determine a true reference of boundary of watershed, sample data were also obtained by field survey and using global positioning system (GPS). The comparison reference points and the results of these data showed the average distance difference between reference boundary, and the result of ASTER data was 43 m. However, the average distance between GPS reference and the other data was high; the difference between the reference data and SRTM was 307 m, and for digital topographic map, it was 269 m. The average distance between topographic map and the GPS points differed 304 m as well. For the statistical analysis of comparison, the coordinates of 230 points were determined; the paired comparisons were also performed to measure the coefficient of determination, R 2, as well as analysis of variance in SPSS software. As a result, the R 2 values for the ASTER data with the digital topography and topographic map were 0.0157 and 0.171, respectively. The results showed that there were statistically significant differences in distances among the four means of the selected models. Therefore, considering other three methods, the ASTER DEM is the most suitable applicable data to delineate the borders of watersheds, especially in rugged terrains. In addition, the calculated flow directions of stream based on ASTER are close to natural tributaries as well as real positions of streams.  相似文献   

9.
冰川流速是冰川动力状况的重要标志,利用合成孔径雷达技术能快速获得大范围冰川的表面流速.利用日本高级陆地观测卫星(ALOS)相控阵型合成孔径雷达L波段(PALSAR)及欧洲太空局的ENVISAT/ASAR数据的特征匹配方法获得帕米尔高原公格尔山区冰川表面流速,并结合合成孔径雷达干涉相干与不同时期数字高程模型对公格尔山区典型冰川动力进行分析,获得研究区不同时间基线冰川表面相干性、表面流速以及基于不同时相DEM的典型冰川表面高程变化信息.结果表明:30 a来克拉牙依拉克冰川表面高程下降了(15±12.1)m,表碛区域近期运动速度变化不大;其木干冰川平均表面高程几乎无变化,但2007-2011年夏季表面流速明显减缓,靠近末端附近部分区域可能已经演化为非活动区;姜满加尔冰川位于西风带的迎风坡,积累区面积大,冰川流速较快,无表碛覆盖,但表面高程仍下降了(8.8±12.7)m.编号为5Y663D0009的冰川冰舌表碛覆盖区可能已经演化为非活动区,30 a来表面高程下降(8.6±12.0)m.综合分析表明,冰川规模特别是积累区面积的大小及所处位置、地形对冰川演化具有重要影响.  相似文献   

10.
刘艳华  赵争  黄国满 《地学前缘》2006,13(3):104-107
合成孔径雷达干涉测量(InSAR)技术是传统的合成孔径雷达技术和射电天文学中的干涉测量技术相结合而发展起来的一项新的遥感技术,这一新技术以其在大范围地表高程测量和地表变形测量方面所具有的独特优势和巨大潜力,而成为对地测量和地学科学研究的一个重要的工具。同星载InSAR相比,机载InSAR在高分辨率区域测图方面具有较大的优势,而且数据采集的时间安排及飞行方位选取方面相对较灵活。而且SAR是一种主动微波遥感技术,具有全天时全天候的工作特征,这一技术也正在成为中国西部困难地区测图的一个非常有效的工具。在详细分析应用机载InSAR数据测量地表高程的基本原理的基础上,提出了机载InSAR自动生成DEM的技术流程,并以内蒙古丰镇地区的机载InSAR数据为基础进行了试验研究,取得了较好的效果,为这一新技术的进一步实际应用奠定了基础。  相似文献   

11.
Deforestation has been a major cause of climate change and other environmental problems. An accurate estimation of the volume of deforested area is needed for United Nations Reducing Emissions from Deforestation and Forest Degradation (UN-REDD+) policies implementation and global carbon accounting. Accurate information about three-dimensional (3-D) structure of forests is required to quantify forest carbon stock. This study demonstrates the use of different digital elevation models (DEMs) to monitor changes in height due to deforestation in Cambodia to support climate change mitigation policies of UN-REDD+. The Shuttle Radar Topographic Mission-DEM (SRTM-DEM), Advanced Spaceborne Thermal Emission and Reflection Radiometer Global DEM (ASTER-GDEM) and Panchromatic Remote sensing Instrument for Stereo Mapping-Digital Surface Model (PRISM-DSM) data were calibrated using Ice Cloud and land Elevation Satellite Geoscience Laser Altimeter System (ICESat–GLAS) data. The results obtained from this study clearly indicate the changes in the height of forests due to deforestation activity. The height of cutover forest generated from the PRISM-DSM and SRTM-DEM is more reliable than that from the PRISM-DSM and ASTER-GDEM data. Field data has also been used to validate the height of the cutover forests, which shows ±5 m uncertainties in the estimation.  相似文献   

12.
The successful operation of the TanDEM-X satellite mission is the start of a new era of globally consistent and accurate digital elevation data for planet Earth. In this work available 12 m-resolution intermediate TanDEM-X products (DEM: digital elevation model; HEM: height error map; COV: coverage map; WAM: water indication mask) are evaluated over Tasmania. Elevations from the TanDEM-X intermediate digital elevation model (IDEM) are compared with (a) other global DEMs (30 m-resolution SRTM1 USGS v3 and 30 m-resolution Advanced Spaceborne Thermal Emission Reflectometer (ASTER GDEM2), (b) the local 25 m-resolution DEM made available by Tasmanian environmental authority (DPIPWE), and (c) over 15 000 accurate ground-control-points (GCPs) from the Australian National Gravity Database (ANGD). The comparison with ASTER and SRTM over the area of Tasmania involves over 500 million valid TanDEM-X IDEM elevations. The root-mean-square (RMS) of 8.8 m indicates a reasonable to good agreement of TanDEM-X IDEM and SRTM, while ASTER shows almost twice the disagreement in terms of RMS (～16.5 m). Both, ASTER and SRTM show a (mean) offset of –1.9 m and –2.3 m w.r.t. TanDEM-X IDEM, respectively. By comparisons with GCPs, we find that SRTM and ASTER overestimate the terrain height. The comparison with the AGND GCPs also allows an estimate of the absolute accuracy of the IDEM, which is found to be superior to that of SRTM or ASTER. The RMS error of 6.6 m shows that the IDEM is close to the officially denoted 4 m absolute vertical accuracy considering that the GCPs are not error free. The height error map information layer is found to a suitable first indicator of the (local) accuracy of the IDEM in a relative sense. However, we find that the HEM tends to underestimate observed differences to the GCPs. Terrain-type analyses reveal that the TanDEM-X IDEM is a very consistent elevation database over Tasmania. In conclusion, our study demonstrates that the new TanDEM-X elevation data sets provide improved high-resolution terrain information over Tasmania and beyond.  相似文献   

13.
抚顺市是中国重要的采煤城市之一,100多年的煤矿开采已经使抚顺地区的地貌特征发生了重大变化。由于长期的露天开采,抚顺西露天矿形成了一个海拔约为-300m的深坑;煤矿的地下开采造成了大面积的地表沉陷;与此同时,煤矸石的露天堆积形成了3个排土场。本研究利用多时相的美国Landsat MSS（Multispectral Scanner）,TM（Thematic Mapper）,ETM+（Enhanced Thematic Mapper Plus）,以及日本ASTER（Advanced Spaceborne Thermal Emission and Reflection Radiometer）卫星遥感数据分析过去近30年来抚顺地区煤矿开采所引起的地貌变化。多时相卫星遥感图像的对比分析显示,由于地面沉陷引起的地表积水面积在近5年（2001～2006年）内出现明显增大的趋势,增加了1.73km。同期的ASTER DEM数据对比分析还发现,西露天矿的开采深度在不断增加,最大增加量为55m,与此同时出现的新增排土场造成地面高程增加量最大为25m。这一研究表明利用遥感技术可以定量监测人类矿产开发活动所引起的地貌特征变化及其过程。  相似文献   

14.
黄河源区阿尼玛卿山典型冰川表面高程近期变化   总被引：1，自引：0，他引：1  
阿尼玛卿山位于青藏高原的东缘,是黄河源区冰川分布比较集中的区域。该区域的冰川物质平衡变化研究对于冰川水资源评估及冰川对气候变化响应研究具有重要借鉴意义。通过TerraSAR-X/TanDEM-X数据的干涉测量方法获得阿尼玛卿山区冰川的高分辨、高精度的数字高程模型（DEM）,与SRTM DEM进行差分获得该区域冰川2000年至2013年间的表面高程变化。对比发现：近13 a来该区域典型大冰川表面高程整体均有所下降,唯格勒当雄冰川末端区域冰川表面高程平均下降（4.16±3.70）m,冰舌中部表面高程有所增加,冰川末端区域表碛覆盖范围有所增加;哈龙冰川表面高程从末端往上呈递减下降的趋势,平均下降（8.73±3.70）m;耶和龙冰川表面平均下降了（13.0±3.70）m,但从冰川末端往上1.6 km区段表面高程平均增加约25 m,冰舌中部表面高程下降明显,对比冰川编目数据、Landsat TM图像可知,该冰川在2000年至2009年间发生过跃动,冰川末端位置前进了约500 m。总体来说,即使存在个别冰川前进现象,该区域冰川在近13 a间仍处于退缩状态。  相似文献   

15.
InSAR（合成孔径干涉雷达测量）是一种新型对地观测技术,由于其高精度、大区域、可穿透云雾、全天候、全天时的工作特性,在数字高程模型（DEM）提取以及地表形变监测方面有着独特的优势.在InSAR图像处理的过程中,相位解缠是至关重要的一步,相位解缠效果的好坏直接影响到高程图的精度.本文利用ASAR数据,在ROI_PAC软件下进行处理,对DEM提取流程进行简要的分析.ROI_PAC软件处理InSAR数据所应用的相位解缠算法是最经典的路径跟踪法——枝切法.对于该算法本文进行了详细的分析探讨,并针对算法中残差点搜索的过程提出了一种新的改进算法思想.  相似文献   

16.
We present a method to estimate the difference between quasigeoid and geoid heights globally from the Earth Gravitational Model EGM08 and a related topographic model. The numerical computations with the standard topographic density of 2.67 g/cm3 show that the maximum and minimum of the separations are estimated to 5.47 m and −0.11 m on the Tibet plateau and in the Indian Ocean, respectively. These estimates do not consider possible topographic density variations, which result in topographic bias changes proportional to the topographic elevation squared. Assuming such density changes of 10% from the standard value, the separation may change up to 5 dm.  相似文献   

17.
In this work, ground penetrating radar (GPR) data, global position system (GPS) data, Landsat remote sensing images and digital elevation model (DEM) SRTM were used to study the Muz Taw glacier in the Sawir Mountains. By a variety of interpolation methods, spatial pattern of thickness of the Muz Taw glacier was obtained. The results show that there are obvious differences between the available GPR transverse profiles. The lower transverse profile has typical “U”-type topographic feature, the maximum glacier thickness is up to 116.4 m; glacier thickness distribution in the higher profile is relatively flat, with an average about 70–90 m. The longitudinal profile forms a ladder-like distribution, which in the middle of the ice bedrock topography has obvious depression. The average longitudinal ice thickness is about 80.89 m; the maximum ice thickness is up to 122.61 m. In addition, the preliminary estimation of the average thickness and total terminus ice volume were approximately 60.5 m and 0.195 km3, respectively.  相似文献   

18.
Digital elevation models (DEMs) used in geospatial analysis like the simulation of geophysical flows, such as floods, landslides, and block and ash flows, differ in resolution, acquisition time and generation methodology, which results in varied representation of topographic features. This study investigates the effects of DEMs on the output of a granular flow model, TITAN2D by comparing the output using different DEMs to that obtained with a “true” representation of the terrain, which is considered to be that obtained by using TOPSAR 5 m data. Seven DEMs at four resolutions from four sources were used for Mammoth Mountain, California, a cumulodome volcano. TITAN2D was run for seven different locations of an eruption of a potential dome and two different collapse volumes. The resulting outputs were subsequently compared with TOPSAR 5 m output, and qualitative and statistical inferences were drawn. DEMs with different resolutions and sources generated different outputs that led to different flow maps. For moderate and smaller scale flows ( $\mathcal{O}(10^4)$ m3 – $\mathcal{O}(10^5) \,\text{m}^3$ ), different representations can affect the computation of accurate footprint of the flow and fine DEM resolution is critical for correct characterization of these flows.  相似文献   

19.
Papaioannou  G.  Loukas  A.  Vasiliades  L.  Aronica  G. T. 《Natural Hazards》2016,81(1):117-144
An innovative approach in the investigation of complex landscapes for hydraulic modelling applications is the use of terrestrial laser scanner (TLS) that can lead to a high-resolution digital elevation model (DEM). Another notable factor in flood modelling is the selection of the hydrodynamic model (1D, 2D and 1D/2D), especially in complex riverine topographies, that can influence the accuracy of flood inundation area and mapping. This paper uses different types of hydraulic–hydrodynamic modelling approaches and several types of river and riparian area spatial resolution for the implementation of a sensitivity analysis for floodplain mapping and flood inundation modelling process at ungauged watersheds. Four data sets have been used for the construction of the river and riparian areas: processed and unprocessed TLS data, topographic land survey data and typical digitized contours from 1:5000-scale topographic maps. Modelling approaches combinations consist of: one-dimensional hydraulic models (HEC-RAS, MIKE 11), two-dimensional hydraulic models (MIKE 21, MIKE 21 FM) and combinations of coupled hydraulic models (MIKE 11/MIKE 21) within the MIKE FLOOD platform. Historical flood records and estimated flooded area derived from an observed extreme flash-flood event have been used in the validation process using 2 × 2 contingency tables. Flood inundation maps have been generated for each modelling approach and landscape configuration at the lower part of Xerias River reach at Volos, Greece, and compared for assessing the sensitivity of input data and model structure uncertainty. Results provided from contingency table analysis indicate the sensitivity of floodplain modelling on the DEM spatial resolution and the hydraulic modelling approach.  相似文献   

20.
The purpose of this study is to evaluate and compare the results of applying the statistical index and the logistic regression methods for estimating landslide susceptibility in the Hoa Binh province of Vietnam. In order to do this, first, a landslide inventory map was constructed mainly based on investigated landslide locations from three projects conducted over the last 10 years. In addition, some recent landslide locations were identified from SPOT satellite images, fieldwork, and literature. Secondly, ten influencing factors for landslide occurrence were utilized. The slope gradient map, the slope curvature map, and the slope aspect map were derived from a digital elevation model (DEM) with resolution 20 × 20 m. The DEM was generated from topographic maps at a scale of 1:25,000. The lithology map and the distance to faults map were extracted from Geological and Mineral Resources maps. The soil type and the land use maps were extracted from National Pedology maps and National Land Use Status maps, respectively. Distance to rivers and distance to roads were computed based on river and road networks from topographic maps. In addition, a rainfall map was included in the models. Actual landslide locations were used to verify and to compare the results of landslide susceptibility maps. The accuracy of the results was evaluated by ROC analysis. The area under the curve (AUC) for the statistical index model was 0.946 and for the logistic regression model, 0.950, indicating an almost equal predicting capacity.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号