共查询到20条相似文献，搜索用时 31 毫秒
1.
Han-Shou Liu 《Physics of the Earth and Planetary Interiors》1985,40(1):43-60
This paper uses plate tectonics and satellite-derived gravity data to further discussion of crustal deformation under the Tibetan Plateau. The first of our three contributions is a spherical harmonic analysis of the global plate boundary system. A distribution of 470 Dirac delta functions is applied to describe the generating forces according to the rates of crustal creation and destruction on the plate boundaries. Analysis of the extensional and compressional forces in the spreading and subducting zones shows that the present global plate motion causes compressional stresses in the N-S direction under the Tibetan Plateau. The second contribution is the calculation of the crustal stresses in Tibet as inferred from satellite gravity data. By applying solutions to the problem of the spherical shells, the satellite-determined stresses indicate that the up-welling mantle material under Tibet induce N-S and E-W extension. Finally, a superimposed stress system is constructed. This stress system shows that the present crustal deformation in Tibet does not produce N-S shortening but generates E-W extension.The results of this paper have provided geodynamical explanations for geological field observations in Tibet and fault plane solutions of earthquakes in the Tibetan side of the India-Eurasia collision. The stress patterns reveal that the cold downwelling mantle convection flow beneath southern Tibet pulls the Indian plate down but applies a bending moment on the end of the plate to uplift and support the mass of the Himalayas. 相似文献
2.
系统研究了1918～2006年间中国大陆及其周缘发生的3115个M4.6以上中、强地震的震源机制解,得到中国大陆地壳区域应力场的压应力轴和张应力轴空间分布的统计结果.探讨了大陆应力场的结构,以及周围板块运动对中国大陆应力场影响作用范围及其界线.结果表明,中国东部的华北地区受到太平洋板块向欧亚板块俯冲挤压的同时,又受到从贝加尔湖经过大华北直至琉球海沟的广阔范围内存在的方位为170°引张应力场的控制.华北地区大地震的震源机制解反映出,该区地震发生为NEE向挤压应力和NNW向张应力的共同作用结果.印度洋板块向欧亚板块的碰撞挤压运动所产生的强烈的挤压应力,控制了喜马拉雅、青藏高原、乃至延伸到天山及其以北的广大地区.在青藏高原周缘地区和中国西部的大范围内,压应力P轴水平分量位于20°~40°,形成了近北东方向的挤压应力场,大量逆断层型强震集中发生在青藏高原的南、北和西部周缘地区以及天山等地区. 本文结果表明,正断层型地震集中发生在青藏高原中部高海拔的地区.证明了青藏高原周缘区域发生南北向强烈挤压短缩的同时,中部高海拔地区存在着明显的近东西向的扩张运动.根据本文最新结果,得到了华北、华南块体之间地壳区域应力场的控制边界线,发现该分界线与大地构造、岩石圈板块构造图等有较大差异,特别是在大别及其以东地区, 该分界线向东南偏转,在沿海的温州附近转向东,最终穿过东海直至琉球海沟.台湾纵谷断层是菲律宾海板块与欧亚板块之间碰撞挤压边界,来自北西西向运动的菲律宾海板块构造应力控制了从台湾纵谷、华南块体,直到中国南北地震带南段东部地域的应力场. 地震震源机制结果还表明,南北地震带南段西侧其P轴大约为NNE方向,与青藏高原的P轴方位一致.南北地震带南段东侧其P轴大约为NWW方向,与华南块体的P轴方位一致.因此,将中〖JP2〗国大陆分成东、西两部分的南北地震带南段是印度洋板块与菲律宾海板块在中国大陆内部影响控制范围的分界线. 相似文献
3.
跨越中、印、缅三国交界的青藏高原东南的喜玛拉雅“东构造结”地区（92°E~97°E，26°N~30°N）一半以上的面积尚没有重力测点，是重力数据空白区,故无法直接研究其重力场特征与深部地壳结构（构造）.本文分析了卫星重力异常的特性，提出应用卫星重力异常作为近似空间重力异常，并作布格改正后，得到的布格重力异常具有与该地区地形高程呈镜像相关的特征，可用以研究深部地壳结构.据三条重力剖面计算得到该地区三个地壳深部结构剖面的结果，给出青藏高原地壳厚度>70 km；喜马拉雅造山带为55 km左右；布拉马普特拉河谷盆地为33~35 km；那加山山脉地区为40~45 km，显示出三者为三个不同的构造单元.同时给出布拉马普特拉构造单元为相对高密度的刚性物质构成，随着印度洋板块向北运移，在碰撞、挤压下，插入青藏高原东南缘一带.导致该地带的强烈构造运动，和频发大、小地震.最后提出了几点认识和建议. 相似文献
4.
Evolution characteristics of Quaternary tectonic stress field in the north and east margin of Qinghai-Xizang plateau 总被引：4，自引：1，他引：3
By inversion of fault slip data for Quaternary tectonic stress field and the analysis of crustal deformation after late Teriary, we explained the evolution of crustal dynamic about the north and east margin of Qinghai-Xizang (Tibet) plateau since Miocene. From middle or late Miocene to early Pleistocene, the tectonic stress field was featured by a maximum principal compression which was coming from the collision of India Plate perpendicular to the boundary of the plateau, and was basically of reverse faulting type. Since the late period of early Pleistocene, India Plate continued to push northward and the compressional deformation of the plateau interior increased continuously, meanwhile, NW-SE extension appeared on the east side of the plateau. This formed a favorable condition for the interior block of the plateau to slide towards east and southeast, causing the faults surrounding the plateau to change from thrust to strike-slip. The contemporary tectonic stress field was formed from the late period of early Pleistocene and continued to present. The direction of maximum principal compressional stress rotated clockwise with respect to the previous tectonic stress field, the stress field was mainly of strike-slip type. 相似文献
5.
CHARACTERISTICS OF SATELLITE GRAVITY FIELD AND SEISMOGENIC MECHANISM IN THE LONGMENSHAN FAULT ZONE 
下载免费PDF全文
下载免费PDF全文 Longmenshan fault zone is a famous orogenic belt and seismic zone in the southeastern Tibetan plateau of China. The Wenchuan MS8.0 earthquake on May 12, 2008 and the Ya'an MS7.0 earthquake on April 20, 2013 occurred in the central-southern part of Longmenshan fault zone. Because of its complex geological structures, frequent earthquakes and special geographical locations, it has attracted the attention of many scholars around the world. Satellite gravity field has advantages in studying gravity field and gravity anomaly changes before and after earthquake. It covers wide range, can be updated regularly, without difficulty in terms of geographical restrictions, and is not affected by environmental factors such as weather, terrain and traffic. Therefore, the use of high-precision Earth satellite gravity field data inversion and interpretation of seismic phenomena has become a hot topic in earth science research. In order to understand satellite gravity field characteristics of the Longmenshan earthquake zone in the southeastern Tibetan plateau and its seismogenic mechanism of earthquake disasters, the satellite gravity data was used to present the terrain information of the study area. Then, by solving the regional gravity anomaly of the Moho surface, the crustal thickness of the study area was inverted, and the GPS velocity field data was used to detect the crustal deformation rate and direction of the study area. Combining the tectonic setting of the Longmenshan fault zone and the existing deep seismic sounding results of the previous researchers, the dynamic characteristics of the gravity time-varying field after the earthquake in the Longmenshan earthquake zone was analyzed and the mechanism of the earthquake was explored. The results show that the eastward flow of deep materials in the eastern Tibetan plateau is strongly blocked at the Longmenshan fault zone. The continuous collision and extrusion process result in a "deep drop zone" in the Moho surface, and the long-term stress effect is conducive to the formation of thrust-nappe and strike-slip structures. The Longmenshan earthquake zone was in the large-scale gradient zone of gravity change before the earthquake, the deep plastic fluid material transport velocity differed greatly, the fluid pressure was enhanced, and the rock mechanical strength in the seismic source region was weakened, which contributed to the intrusion of crustal fluid and the upwelling of the asthenosphere. As a result, the continuous accumulation of material and energy eventually led to continuous stress imbalance in the deep part and shear rupture of the deep weak structure, causing the occurrence of the thrust-nappe and strike-slip earthquake. 相似文献
6.
Analysis of stress state of faults is helpful to understand crustal mechanical properties and seismicity. In the paper, we invert the horizontal crustal stress field in the southeastern Tibetan plateau using focal mechanism solutions of small and medium-size earthquakes, and apply them to estimate the stability of regional major faults.
Firstly, we collect focal mechanism solutions of small and medium-sized earthquakes in the southeastern Tibetan plateau. The dataset includes more than 1 000 focal mechanism solutions in the past twenty years. Magnitudes of these earthquakes vary from M3.0 to M6.0. Most of the focal mechanism solutions were determined using waveform inversion technique. Although most of focal mechanism solutions in the southeastern Tibetan plateau are strike-slip faulting, their spatial pattern is different in sub-regions. Normal faulting earthquakes mainly occurred in the western Sichuan region, reverse faulting earthquakes mainly occurred in the boundary zone between the Tibetan plateau and the South China craton, and strike-slip faulting earthquakes mainly occurred in the central and southern Yunnan region.
Next, we settle on a mesh with grid spacing of 0.5° in longitude and latitude in the region and invert the horizontal crustal stress field at each grid point. Spatial variation of the maximum principal stress axis in the southeastern Tibetan plateau shows a clockwise rotation around the eastern Himalaya syntax. The azimuth of maximum compressional stress axis is about 88.1° in the western Sichuan region, about 124.6° in the South China craton, and about 21.6° in the western and southern Yunnan region. The azimuth of regional maximum compressional stress is nearly parallel to the direction of terrain elevation gradient, and that of the minimum compressional stress is nearly parallel to the tangential direction of the topographic elevation contours. The spatial pattern reflects the control role of gravity spreading of the Tibetan plateau on the regional horizontal stress field.
Finally, we analyzed regional fault stability based on these collected focal mechanism solutions. The fault instability parameter (I) is defined based on the Mohr-Coulomb criterion and indicates the degree of fault approximating to rupture. The instability parameters on fourteen major faults in the southeastern Tibetan plateau were calculated. Our results show that the stability of the Lianfeng-Zhaotong Fault is the lowest before 2014 in the region, which indicates the fault zone is close to rupture at that time. Our results provide a new useful tool to assess regional seismic potential using dense focal mechanism solutions. 相似文献
7.
Han-Shou Liu 《Physics of the Earth and Planetary Interiors》1983,32(2):146-159
The stress field in the Earth's crust as inferred from satellite gravity data causes crustal deformation and seismotectonic block movements in central Europe. The satellite-determined stresses in the crust of central Europe are consistent with earthquake focal mechanisms, joint-orientation and in situ stress measurements. 相似文献
8.
Upper crustal deformation characteristics in the northeastern Tibetan Plateau and its adjacent areas revealed by GNSS and anisotropy data 下载免费PDF全文
下载免费PDF全文 The northeastern part of the Tibetan Plateau is a region where different tectonic blocks collide and intersect, and large earthquakes are frequent. Global Navigation Satellite System(GNSS) observations show that tectonic deformation in this region is strong and manifests as non-uniform deformation associated with tectonic features. S-wave splitting studies of near-field seismic data show that seismic anisotropy parameters can also reveal the upper crustal medium deformation beneath the reporting... 相似文献
9.
青藏高原东北缘作为高原向外扩张的最前缘地区,代表了高原最新的变形状态,是研究青藏高原变形加厚的关键地区.本文利用"中国地震科学台阵探测"项目在南北地震带北段布设的密集宽频带流动台阵资料,采用虚拟地震测深方法（VDSS）,对青藏高原东北缘及周边地区的地壳厚度进行了研究,以期为研究青藏高原东北向扩展的前缘位置,以及扩展的动力学模式等提供地球物理学依据.波形模拟的结果显示,研究区地壳厚度变化剧烈.其中,祁连和西秦岭地块内地壳厚度存在明显的东西向横向变化,以103°E为界,东部地区为45~50 km,而西部地区地壳已明显增厚,约达到55 km以上.与祁连造山带相邻的阿拉善块体南缘地壳也明显加厚,接近55 km,而阿拉善块体内部地壳厚度约为45~50 km.与其他研究地区相比,鄂尔多斯地块地壳相对要薄,但整体而言,鄂尔多斯地块地壳呈现南北薄（约45 km）、中央厚（约50 km）的形态特征.此外,在六盘山断裂带台站下方观测到复杂的SsPmp震相,推测为双Moho界面结构.结合其他地球物理学证据,我们认为青藏高原东北缘地区地壳增厚方式以均匀缩短增厚为主,且高原向北东扩展的前缘已越过祁连山北缘断裂,进入阿拉善块体南缘地区. 相似文献
10.
中国大陆现今实测地应力场的状态与板块构造环境、活动断裂带分布、地形地貌以及地壳结构呈现一定相关性. 在中国大陆西缘,印度洋板块与欧亚板块陆发生陆碰撞,在中国大陆东缘,菲律宾海板块、太平洋板块俯冲到欧亚板块之下. 中国大陆内部被大型活动断裂带分割为多个块体,各个块体的地壳结构和厚度呈不均匀分布,地形地貌起伏具有很大的差异. 笔者以中国大陆块体模型为基础,把板块构造作用和重力势作为主要影响地应力状态的两个主要要素,在现今活动构造、GPS和实测地应力等成果的约束下,利用线性黏弹体球壳有限元模拟分析了中国大陆现今地应力场的分布特征和控制因素. 结果表明: (1)构造应力场总体上呈现出西部挤压,东部拉张的特征,印度板块与欧亚板块的持续碰撞形成了青藏高原及其周缘的挤压性质的构造应力场,而东部菲律宾板块与太平洋板块的俯冲形成了黄海、东海和环渤海区域的拉张性质的构造应力场,中间为拉张环境和挤压环境的过渡,最大主应力的方向受到板块构造环境和活动构造分布的控制;(2)重力的影响主要体现在地形梯度大和地壳厚度结构变化大的地壳浅部区域,在藏南、滇西北局部地区的地壳浅部由于受到重力势控制,呈现为张性应力场,在塔里木地区由于重力势引起的应力场与构造应力场同为挤压性质,因此该区的挤压强度得以增加;(3)中国大陆浅部地应力场的状态主要受到区域板块构造环境、块体边界活动构造带的展布和地形的控制,总体上以南北构造带为界,西部以较强的压性构造环境为主,东部为较弱的压性构造环境,藏南和滇西北局部地区存在有张性构造环境;构造应力对地应力的贡献比重随着深度增加而增加;(4)采用黏弹性模型的构造应力场模拟结果比完全弹性模型的模拟结果能够更好地与实测地应力场相吻合,利用完全弹性模型分析由地震等诱发的地应力瞬时变化是有效的;(5)青藏高原东南缘最大主应力方向发生了较大的偏转,其主要控制因素有:印度板块持续的碰撞、中下地壳对上地壳拖曳以及印度板块通过实皆断裂对欧亚板块的剪切拉伸作用. 中国大陆现今地应力场是整个地壳岩石黏弹特性长期演化和断裂活动的结果,是地应力场动态演化过程中在现今时间点上的状态,受到板块构造环境、大陆内部活动断裂分布、地形地貌和地壳结构等因素不同程度的控制,模拟结果为中国大陆地应力场提供了一个定量的参考模型. 相似文献
11.
青藏高原东北缘由于受到多个构造块体的共同约束,表现出复杂的地球物理特性和地质特性,本文利用甘肃数字地震台网(2001-2008年)的观测资料,采用系统分析方法(SAM),进行地壳剪切波分裂分析,获得研究区内18个台站共1005条记录的剪切波分裂参数.研究结果表明,青藏高原东北缘介质各向异性在空间上存在差异,慢剪切波延迟时间表明了地壳介质各向异性的强弱变化特征,快剪切波平均偏振方向则反映了本区区域构造应力的空间变化特征.分析认为,祁连山-河西走廊活动构造区直接受青藏地块与阿拉善地块间相互作用,与青藏地块构造应力一致;甘东南活动构造区的应力环境主要受到内部活动断裂的共同作用,具有局部构造应力的特征. 相似文献
12.
帕米尔高原是五大山脉汇结之中心,被称为"西构造结".在此山高耸谷陡深是人迹罕至的无人区.应用稀少的地面重力和人工地震数据和卫星重力资料,以NNW和NEE向两条长达1620 km的十字交叉剖面,对帕米尔高原地区地壳深部结构与区域地质构造进行了研讨.帕米尔高原中心地区地壳厚度(莫霍界面深度)接近70 km,并在总体上呈向四周逐渐延展减薄(变浅)的总趋势,到帕米尔的周边地区减薄为50余km左右.这里是一个壳幔结构变异的构造强烈活动地域. 相似文献
13.
ESTIMATING THE LOWER CRUSTAL VISCOSITY OF THE WESTERN QINLING-SONGPAN TECTONIC NODE AND ITS ADJACENT AREAS BY USING LANDFORM MORPHOLOGY 下载免费PDF全文
下载免费PDF全文 The western Qinling-Songpan tectonic node is located at the intersection of three major tectonic units of Tibetan plateau, the South China Block and the Ordos Block, and is at the forefront of the northeastern margin of Tibetan plateau. It has unique geological and dynamic characteristics from the surface to the deep underground. Based on the model for ductile flow in the lower crust, the geomorphological form is used to estimate the viscosity of the lower crust, and how the rheological process of the deep lithosphere acts on the upper crust deformation and structural geomorphology. And combined with GPS velocity field data, the current crustal deformation is analyzed to further study the regional dispersive deformation process. The results show that the viscosity of the north and northeast of the Zoige-Hongyuan Basin is smaller than that of the east and southeast. Therefore, the lower crust flow has a tendency of flowing to the northeastern low viscosity zone. We believe that when the lower crust flows from the central plain of the Qinghai-Tibet Plateau to the rigid Sichuan Basin with a higher viscosity of the lower crust, it cannot flow into the basin, and part of the lower crust flow accumulate here, causing the upper crust to rise, and the uplifting led to the formation of the Longmen Mountains and a series of NNE-striking faults as well. When the lower crust flows to the northeast direction with a low viscosity, the brittle upper crust is driven together. Because of the remote effects from the Ordos Basin and the Longxi Basin, the mountains in this region are built slowly and the stepped arc-shaped topography of the current 3 000-meter contour line and the 2 000-meter contour line are developed. At the same time, a series of NWW-trending left-lateral strike-slip faults are developed. This explains the seismogenic tectonic model of the western Qinling-Songpan tectonic node as from NWW-trending left-lateral strike-slip faulting to the NNE-trending right-lateral strike-slip faulting and both having a thrust component. The current crustal movement direction revealed by the GPS velocity field is consistent with the direction of historical crust evolution of the lower crust revealed by the viscosity, implying that there is a good coupling relationship between the lower crust and upper crust. The results provide a basis for studying the development of fault systems with different strikes and properties, the formation of orogenic belts, the macroscopic geomorphological evolution characteristics, and the rheological and uplift dynamics of the lithosphere in the northeastern margin of the Tibetan plateau.
In addition, our research differs from the previous studies in the spatial and temporal scale. Previous studies included either the entire Qinghai-Tibet Plateau or only the eastern margin of the Qinghai-Tibet Plateau. However, our analysis on the contours and topographical differences in the topography of the western Qinling-Songpan tectonic knot reveals that the study area is controlled by the lower crust flow. Our results are confirmed by various observations such as seismology, magnetotellurics and geophysical exploration. Moreover, the previous studies did not point out enough that the elevation contours are elliptical, and the elliptical geomorphology further illustrates that the formation and evolution of the Qinghai-Tibet Plateau has rheological characteristics and also conforms to the continuous deformation mode. Meanwhile, in terms of time scale, the evolution time of the study area is divided into three types of simulation time according to geochronology. And the GPS velocity field is introduced to observe the present-day crustal deformation. 相似文献
14.
断裂晚第四纪滑动速率及现今GPS观测揭示了青藏高原向北扩展与高原边缘隆升的运动特征.主要断裂晚第四纪滑动速率及跨断裂GPS应变速率的结果表明,青藏高原北部边缘的断裂以低滑动速率（＜10 mm/a）为主,特别是两条边界断裂：阿尔金断裂和海原—祁连山断裂.两条主要边界断裂上的滑动速率分布显示了断裂间滑动速率转换及调整特征.阿尔金断裂自95°E以西的8～12 mm/a稳定滑动速率,向东逐渐降低到最东端的约1～2 mm/a,而海原断裂自哈拉湖一带开始发育后滑动速率为1～2 mm/a,到祁连一带（101°E以东）增大到相对稳定的4～5 mm/a,直到过海原后转向六盘山一带,滑动速率降低到1～3 mm/a,甚至更低.滑动速率的变化及分布特征显示,阿尔金断裂滑动主要是通过祁连山内部隆起及两侧新生代盆地变形引起的缩短来吸收的,海原—祁连山断裂的低滑动速率及沿断裂运动学特征表明断裂尾端的陇西盆地变形及六盘山的隆起是断裂左旋走滑速率的主要吸收方式.这一变形特征表明,青藏高原北部边缘的变形模式是一种分布式的连续变形,变形发生自高原内部,边界断裂的走滑被高原内部变形所吸收. 相似文献
15.
Relationship between the regional tectonic activity and crustal structure in the eastern Tibetan plateau discovered by gravity anomaly 下载免费PDF全文
下载免费PDF全文 The eastern Tibetan plateau has been getting more and more attention because it combines active faults, uplifting, and large earthquakes together in a high-population region. Based on the previous researches, the most of Cenozoic tectonic activities were related to the regional structure of the local blocks within the crustal scale. Thus, a better understanding of the crustal structure of the regional tectonic blocks is an important topic for further study. In this paper, we combined the simple Bouguer gravity anomaly with the Moho depths from previous studies to investigate the crustal structure in this area. To highlight the crustal structures, the gravity anomaly caused by the Moho relief has been reduced by forward modeling calculations. A total horizontal derivative (THD) had been applied on the gravity residuals. The results indicated that the crustal gravity residual is compatible with the topography and the geological settings of the regional blocks, including the Sichuan basin, the Chuxiong basin, the Xiaojiang fault, and the Jinhe fault, as well as the Longmenshan fault zone. The THD emphasized the west margin of Yangtze block, i.e., the Longriba fault zone and the Xiaojiang fault cut through the Yangtze block. The checkboard pattern of the gravity residual in the Songpan-Garze fold belt and Chuandian fragment shows that the crust is undergoing a southward and SE-directed extrusion, which is coincident with the flowing direction indicated from the GPS measurements. By integrating the interpretations, the stepwise extensional mechanism of the eastern Tibetan plateau is supported by the southeastward crustal deformation, and the extrusion of Chuandian fragment is achieved by Xianshuihe fault. 相似文献
16.
用地震活动资料研究了青藏高原东北地区的现代构造运动特征．地震活动证据表明,青藏高原东北地区活动块体之间是以复杂的变形带接触的．甘-青地块与阿拉善地块之间有一个宽阔的挤压变形带,该挤压带东南端转变为以网络状水平剪切变形为主．甘-青地块与鄂尔多斯地块接触的六盘山地区处于NE-SW向的挤压变形之中．鄂尔多斯地块与阿拉善地块间有一个具有拐折结构的剪切变形带,鄂尔多斯地块的西北角和东南缘处于NNW-SSE方向的受拉伸状态．该区现代构造变形特征可能与青藏高原向东北的挤压作用、鄂尔多斯地块的阻挡作用以及高原物质向东南方向挤出运动有关． 相似文献
17.
根据震旦－第三纪地震中构造变形的实际观测及卫星影象解译资料,计算了清江大龙潭水库区新生代以来区域应力场的主应力方向。结果表明：主压应力为北东东向,主张应力为北北西向;现代构造应力场与新生代以来应力场基本一致;晚第三纪以来,该区构造应力场相对稳定和统一。 相似文献
18.
研究帕米尔高原的构造变形特征对于理解印度板块向北推挤过程中的应变分配方式以及应力转换模式具有重要的意义.本文利用区域GPS应变场、地震应变场与震源应力场分析帕米尔高原的构造形变特征.主要结论为:(1)该区域变形主要以NNW-SSE或近N-S向的挤压为主,在高原内部伴有明显的近ENE-WSW或E-W向拉张,应力方向在帕米尔高原与塔吉克盆地区域呈现逆时针旋转的趋势,而在塔里木盆地则显示几乎与帕米尔高原的一致的应力状态,这可能与两侧盆地块体的强度差异有关.(2)安德森断层参数A∅显示帕米尔高原北缘与西侧区域为逆断层应力状态,在高原内部为正断层应力状态,这与GPS应变的结果显示的应变主要集中在主帕米尔断裂与阿莱谷地附近而在高原内部应变较低是一致的,另外应力在喀喇昆仑断裂北段的方向基本平行于断层走向,以及断层北端较低的滑动速率,这说明了地壳挤压缩短可能是帕米尔高原主要的的构造变形特征,并不支持由于边界走滑断裂导致的应变分异或者块体挤出的模式.(3)综合考虑地震应变方向与SHmax从帕米尔北部NNW-SSE方向到天山北部的近N-S方向的转换,GPS应变方向在帕米尔高原两侧盆地都存在不同程度的旋转,应力场安德森参数A∅显示的应力状态以及SKS的结果显示的近ENE-WSW方向,我们认为印度板块向北推挤与天山造山带碰撞导致帕米尔高原不对称的径向逆冲是帕米尔高原现今构造变形的主要成因与构造模式. 相似文献
19.
由于自然环境的限制, 青藏高原的大地测量网络十分稀疏, 不能满足区域地壳运动监测的需求。干涉合成孔径雷达(InSAR)是非接触监测地壳运动的一种重要方式, 但在高原上受到冻土的影响。本文基于2014~2018年的Sentinel-1卫星C波段雷达数据, 采用InSAR时序技术分析了冻土形变的时空特征。针对InSAR位移时间序列, 采用空间滤波去除了大气延迟、 地形效应等局部公共误差, 提高了时间序列的信噪比。结果显示, 青藏高原的冻土运动可分为差异较大的两类: 在大部分冻土区域, 与周边高山(基岩)区域相比, 冻土地区显示类似的季节波动或一定的长期沉降; 在部分冻土地区存在异常快速下沉区域, 例如在西藏中部布若错湖西南侧的沉积盆地内, 存在一个直径约2 km的漏斗型沉降区, LOS向沉降速率可达约10±2.1 mm/a。构造运动造就了高原上大量沿断裂线分布的河流、 湖泊, 河床和沉积盆地等广泛分布着冻土, 给准确分析构造形变带来很大挑战, 本文所得的结果可作为区分冻土运动与构造变形的一种有效判据, 也有益于研究高原冻土的物理特性及变形机理。 相似文献
20.
Shear-wave splitting in the crust: Regional compressive stress from polarizations of fast shear-waves 下载免费PDF全文
下载免费PDF全文 When propagating through anisotropic rocks in the crust, shear-waves split into faster and slower components with almost orthogonal polarizations. For nearly vertical propagation the polarization of fast shearwave (PFS) is parallel to both the strike of the cracks and the direction of maximum horizontal stress, therefore it is possible to use PFS to study stress in the crust. This study discusses several examples in which PFS is applied to deduce the compressive stress in North China, Longmenshan fault zone of east edge of Tibetan plateau and Yunnan zone of southeast edge of Tibetan plateau, also discusses temporal variations of PFS orientations of 1999 Xiuyan earthquake sequences of northeastern China. The results are consistent to those of other independent traditional stress measurements. There is a bridge between crustal PFS and the crustal principal compressive stress although there are many unclear disturbance sources. This study suggests the PFS results could be used to deduce regional and in situ principal compressive stress in the crust only if there are enough seismic stations and enough data. At least, PFS is a useful choice in the zone where there are a large number of dense seismic stations. 相似文献