共查询到20条相似文献，搜索用时 31 毫秒
1.
Constraining the ages of fluvial terraces is essential to understanding fluvial responses to climate and sea-level changes and estimating uplift/incision. Luminescence dating of sand or silt grains from fluvial terrace deposits in Japan is difficult because sand layers are often absent from gravelly deposits, quartz grains are typically dominated by medium/slow components and/or contaminated by feldspars, and short transport distances and short residence times in riverbeds result in poor bleaching of luminescence signals. Luminescence dating of cobbles may overcome these difficulties, but few studies have applied this technique to fluvial terrace deposits. Here, we examine the utility of luminescence dating applied to three granodiorite cobbles from a late Pleistocene fluvial terrace deposit of the Ara River, Japan. We investigated variations of the infrared stimulated luminescence (IRSL) and post-IR IRSL signals with depth in each cobble. The IRSL and post-IR IRSL signals generally increase with depth, indicating that the cobbles were not completely bleached before deposition. Nonetheless, the IRSL ages of the cobble surfaces (19–17 ka) are consistent with the age of a tephra layer (16–15 ka) at the base of loess deposits overlying the terrace. In contrast, IRSL ages of sand-sized feldspar grains overestimate the depositional age because of incomplete bleaching, whereas silt-sized quartz grains greatly underestimate the depositional age, likely because of the thermal instability of the medium component. Our results demonstrate that luminescence dating of cobbles could provide a better understanding of fluvial systems in which luminescence dating of sand grains is difficult. 相似文献
2.
Landforming processes are highly active in the Arctic, and luminescence dating can be used to establish a chronological framework for these processes. For example, luminescence ages of raised littoral and marine deposits provide the age control for many reconstructions of Pleistocene events in the Arctic. Due to the nature of the depositional environment (e.g. short transport distance, turbid water, long polar night) these types of sediment may not be completely zeroed at the time of deposition. To test the significance of incomplete bleaching in this type of environment, surface sediments were sampled along a transect from the margin of a glacier out into a nearby bay on NW Svalbard. The water in the bay is very turbid (secchi depth 0.1 m), but there is significant reworking by waves along the shores.Quartz optically stimulated luminescence (OSL) and feldspar infrared stimulated luminescence (IRSL) were measured using sand-sized grains. For quartz OSL and feldspar IRSL (50 °C) the ice-proximal sample showed relatively high doses (∼12 Gy) while nearby beach sand and shallow-marine deposits, as well as ice-distal sandur sediments, had much lower doses: most OSL doses were consistent with zero, while IRSL (50 °C) ranged from 0.5 to 6.5 Gy. Post-IR IRSL (290 °C) doses were overall much higher (∼20–55 Gy), which partly is due to a significant (∼12 Gy) unbleachable residual, and partly due to slower bleaching rates than for the IRSL (50 °C) signal.In this Arctic environment it appears that bleaching is limited in the first ∼100 m of meltwater transport from the glacier margin, but for material transported at least 3 km bleaching of OSL and IRSL (50 °C) signals is more or less complete. Given the very limited light penetration through the seawater in the bay, any bleaching must have occurred during fluvial/subaerial transport to the bay or by wave-reworking on the beach. Apart from the ice-proximal glacifluvial sediments, residual apparent doses recorded by quartz OSL and feldspar IRSL (50 °C) are negligible for the luminescence dating of Pleistocene-aged deposits of ice-distal, littoral and shallow-marine origin. 相似文献
3.
In addition to dating, IRSL luminescence signals can preserve information about erosional, transport, and depositional histories of a population of grains. Knowledge of the degree of bleaching can be useful in understanding the processes that occurred during previous depositional events, as certain transport conditions result in a well bleached signal, while others result in grains retaining an inherited signal from prior events. This information can be accessed by making single-grain IRSL measurements across successively increasing temperatures, thereby isolating signals from traps of different bleachabilities.A new approach offers a way to evaluate the completeness of bleaching of a grain by testing patterns of equivalent dose (DE) values measured at three elevated temperatures (3ET), 50, 125, and 225 °C. Consistent DE estimates across two or more temperatures suggest a single bleaching event of sufficient duration to fully depopulate the traps involved. Incompletely bleached grains with inconsistent DE values across temperatures will lack a 3ET “plateau.” Modes in the distribution of DE values for fully bleached grains can suggest depositional ages, subject to assessment of fading. We developed a Python code in a Jupyter Notebook environment for data analysis and visualization to expedite processing the large data sets produced by the 3ET protocol.The 3ET protocol was tested on a radiocarbon dated sequence of playa samples from California, USA and on a set of fluvial terraces in the Marlborough region of New Zealand as part of a larger project to reconstruct regional seismic history. Where standard pIRIR apparent ages can be inconsistent or ambiguous, 3ET age estimates produce generally consistent apparent ages. Modes of 3ET plateaus can be used to infer the most recent and prior events that resulted in a sub-population of grains being fully bleached. These initial results suggest that the 3ET method can be useful to characterize both the age and degree of bleaching of depositional events. 相似文献
4.
Studies of modern sediments, their sedimentology and depositional processes are important for understanding the behaviour of the luminescence characteristics of quartz and feldspar in fluvial settings. Previous studies have shown large variations in OSL characteristics of quartz from different fluvial systems, while the IRSL and pIRIR signals from K-feldspar have been understudied. We test the effects of fluvial setting on luminescence characteristics by collecting modern (<1 year old) bedload sediments down the courses of three river systems with very different hydrological characteristics, geologic contexts, and catchment lithologies. The single grain (SG) and multi-grain aliquot (MGA) OSL (quartz) and IRSL and pIRIR (K-feldspar) properties of samples were measured and compared to better understand intra- and inter-fluvial system patterns in sensitivity, bleaching, and equivalent dose (De) distribution skewness and kurtosis. The quartz OSL and K-feldspar IRSL and pIRIR signal sensitivities increase with downstream transport distance of sediments, confirming previous studies (quartz) and showing that IRSL signals from K-feldspar also increase in response to reworking cycles. Increasing transport distance also results in better bleaching of the OSL signal from quartz samples (MGA and SG) due to more grains being exposed to sunlight. By contrast, the IRSL and pIRIR signals retain significant residuals in all samples, though 5–15% of grains yield zero-dose De values and age modelling of SG data yields accurate burial dose estimates. Additionally, the skewness and kurtosis of SG OSL De datasets from one river increase with transport distance, with the best bleached samples exhibiting the highest skewness, thereby questioning the applicability of the skewness-value of a De dataset as an accurate indicator for partial-bleaching. Our data shows marked variability between (i) different river systems and (ii) the measured minerals, however consistent use of statistical models allows accurate De estimation in all contexts. Age modelling of SG data from K-feldspar, thus, provides a valuable tool for future fluvial research in regions where poor OSL characteristics prevent the use of quartz as a dosimeter. 相似文献
5.
Infrared stimulated luminescence (IRSL) and post-IR IRSL are applied to small aliquots and single grains to determine the equivalent dose (De) of eleven alluvial and fluvial sediment samples collected in the Pativilca valley, Central Peru at ca. 10°S latitude. Small aliquot De distributions are rather symmetric and display over-dispersion values between 15 and 46%. Small aliquot g-values range between 4 and 8% per decade for the IRSL and 1 and 2% per decade for the post-IR IRSL signal. The single grain De distributions are highly over-dispersed with some of them skewed to higher doses, implying partial bleaching; this is especially true for the post-IR IRSL. Measurements of a modern analog reveal that residuals due to partial bleaching are present in both the IRSL as well as the post-IR IRSL signal. The g-values of individual grains exhibit a wide range with high individual uncertainties and might contribute significantly to the spread of the single grain De values, at least for the IRSL data. Electron Microprobe Analysis performed on single grains reveal that a varying K-content can be excluded as the origin of over-dispersion. Final ages for the different approaches are calculated using the Central Age Model and the Minimum Age Model (MAM). The samples are grouped into well-beached, potentially well-bleached and partially bleached according to the evaluation of the single grain distributions and the agreement of age estimates between methods. The application of the MAM to the single grain data resulted in consistent age estimates for both the fading corrected IRSL and the post-IR IRSL ages, and suggests that both approaches are suitable for dating these samples. 相似文献
6.
Luminescence dating has long been used for chronological constraints on marine sediments due to the ubiquitous dating materials (quartz and feldspar grains) and its applicability over a relatively long time range. However, one of the main difficulties in luminescence dating on marine sediments is partial bleaching, which causes age overestimations. Especially, partial bleaching is typically difficult to be detected in the fine grain fraction (FG) of marine sediments. The recently developed feldspar post-IR IRSL (pIRIR) protocol can detect non-fading signals and thus avoid feldspar signal instability. In the current study, fine grains were extracted from a gravity core in the northern Sea of Japan, and the aim is to test the feasibility of using different luminescence signals with various bleaching rates to explore the bleaching conditions of fine grain fraction in marine sediments. The results suggest that the quartz OSL signal and polymineral pIRIR signals at stimulation temperatures of 150 °C and 225 °C (pIRIR150 and pIRIR225) of FG were well bleached prior to deposition. The OSL ages were used to establish a chronology for this sedimentary core and the resulting age-depth relationship is self-consistent and comparable with radiocarbon dates. We conclude that different luminescence signals with various bleaching rates can be used to test the bleaching conditions of fine grain fraction in marine sediments; and the luminescence dating can be applied to marine sediments with great potential. 相似文献
7.
A comparative study using quartz optically stimulated luminescence (OSL) and feldspar post-infrared infrared stimulated luminescence (post-IR IRSL) was undertaken on Quaternary fluvial sediments from an unnamed tributary of the Moopetsi River in South Africa. The aim is to assess whether the post-IR IRSL signal can be used to date incompletely bleached sediments. Several post-IR IRSL signals using varying stimulation and preheat temperatures were investigated; of these the post-IR IRSL225 signal was deemed most appropriate for dating because it bleached most rapidly. The feldspar post-IR IRSL225 equivalent dose (De) values from this site are consistently larger than those from quartz OSL, probably due to differences in the bleaching characteristics of the two signals. Additionally, the post-IR IRSL225 De values within a sample showed less variation in precision than the quartz De data, possibly due to greater averaging between grains in the feldspar small aliquots. The agreement between ages based on the OSL and post-IR IRSL225 signals was better for younger samples (<20 ka) than for older ones (>50 ka); the cause of this variation is unclear. 相似文献
8.
Sediments of river deltas provide valuable records of past coastal environments. Optically-stimulated luminescence (OSL) dating has become an alternative to radiocarbon dating for constraining the sediment chronology in large deltas that allow for sufficient sunlight bleaching of sediments during the fluvial transport. However, its applicability to smaller deltas with mountainous riverine systems has not been confirmed yet. To check this, we examine multiple signals from two Holocene sediment cores in the wave-dominated Thu Bon River delta in central Vietnam. Two cores were collected, respectively, 3.9 km and 1.2 km inland from the present shoreline and both show a >-25-m thick succession of coarsening-upward mud to sand deposits. Coarse grains (180–250 μm in diameter) of quartz and K-feldspar, and fine grains (4–11 μm in diameter) of quartz and polymineral were extracted from the upper and lower parts of the cores for multi-grain measurements of quartz OSL, and of feldspar infrared-stimulated luminescence (IRSL) at 50 °C (IR50) and post-IR IRSL at 175 °C (pIRIR175) to determine burial ages. In addition, facies analysis and radiocarbon dating were conducted. The landward core consists of transgressive to early regressive estuarine and prodelta facies, which is overlain by a sandy beach-shoreface facies. The seaward core consists of a relatively simple shallowing-upward succession from muddy prodelta facies to sandy beach-shoreface facies. All luminescence ages except for pIRIR175 of fine grains are mostly consistent with the radiocarbon ages. Instead, pIRIR175 ages of fine grains are significantly overestimated with variable offsets. OSL and IR50 of fine grains provide reasonable age estimates, as these grains were likely well bleached during the transport even along a short and steep mountainous river. Consistent age estimates of all signals from sand indicate that sand was well-bleached in the beach and shoreface owing to the frequent sediment reworking by waves and currents. These results support the hypothesis that luminescence dating is applicable to Holocene wave-dominated deltas and reiterate that comparing different luminescence signals is an effective way to check reliability of the age estimates in environments where the sunlight bleaching is not ensured. 相似文献
9.
Esperanza Muñoz‐Salinas Paul Bishop David CW Sanderson Jose‐Juan Zamorano 《地球表面变化过程与地形》2011,36(5):651-660
Optically stimulated luminescence (OSL) is a technique that has been applied from the mid‐1980s, mainly for sediment dating. The OSL technique is based on sample stimulation by light to determine the luminescence signal that is stored in the crystal lattices of sediment grains after deposition, burial by later sediment and subsequent exposure to ionizing radiation from radioactive elements in the surrounding sediment. In such sediment dating, two parameters are required: the equivalent dose (i.e. the luminescence signal stored in the grains), and the dose rate (i.e. the ionizing energy from α, β and γ radiation emitted by naturally occurring radioisotopes in the deposit, plus the effects of cosmic radiation). In this research, the OSL technique is not used for dating. The study goal is to analyse only the luminescence signals (the total photon counts) in polymineral samples obtained after light stimulation in the blue (BLSL) and infrared (IRSL) wavelengths using a portable OSL reader designed and built at the Scottish Universities Environmental Research Centre (SUERC). Three fluvial case studies – from Cambodia, Australia and Mexico – are used to illustrate the geomorphological interpretations possible with the portable OSL reader data from sediments resulting from a range of different depositional processes. The case studies show that aspects of sediment's transport and depositional processes can be inferred from the portable OSL reader data, providing valuable insights into geomorphological history. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
10.
Andrea Román-Sánchez Tony Reimann Jakob Wallinga Tom Vanwalleghem 《地球表面变化过程与地形》2019,44(10):2051-2065
The interplay of bioturbation, soil production and long-term erosion–deposition in soil and landscape co-evolution is poorly understood. Single-grain post-infrared infrared stimulated luminescence (post-IR IRSL) measurements on sand-sized grains of feldspar from the soil matrix can provide direct information on all three processes. To explore the potential of this novel method, we propose a conceptual model of how post-IR IRSL-derived burial age and fraction of surface-visiting grains change with soil depth and along a hillslope catena. We then tested this conceptual model by comparison with post-IR IRSL results for 15 samples taken at different depths within four soil profiles along a hillslope catena in the Santa Clotilde Critical Zone Observatory (southern Spain). In our work, we observed clear differences in apparent post-IR IRSL burial age distributions with depth along the catena, with younger ages and more linear age–depth structure for the hill-base profile, indicating the influence of lateral deposition processes. We noted shallower soils and truncated burial age–depth functions for the two erosional mid-slope profiles, and an exponential decline of burial age with depth for the hill-top profile. We suggest that the downslope increase in the fraction of surface-visiting grains at intermediate depths (20 cm) indicates creep to be the dominant erosion process. Our study demonstrates that single-grain feldspar luminescence signature-depth profiles provide a new way of tracing vertical and lateral soil mixing and transport processes. In addition, we propose a new objective luminescence-based criterion for mapping the soil-bedrock boundary, thus producing soil depths in better agreement with geomorphological process considerations. Our work highlights the possibilities of feldspar single grain techniques to provide quantitative insights into soil production, bioturbation and erosion–deposition. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd. 相似文献
11.
Catastrophic drainage of ice-dammed lakes in the Altai Mountains has been inferred from geomorphological evidence in the Katun Valley (Russia), and is presumed to have occurred during the Pleistocene. The sedimentary features have been difficult to date directly, due to the absence of organic carbon, and the improbability that luminescence signals in sand grains would be reset during transport. However, the development of rock-surface luminescence dating provides a new opportunity to date the features: clasts have a different transport history to sand grains, and their luminescence depth profiles can be inspected for evidence of bleaching before burial. Here we investigate two sites in the Altai Mountains, and use rock-surface luminescence burial dating to constrain the age of the megaflood deposits. In the Katun Valley, we sampled granite cobbles from a frozen sediment clast emplaced as a dropstone within a massive megaflood gravel terrace. Burial ages for the clasts range from 16.7 to 21.4 ka, with a mean age of 19.8 ± 1.5 ka. This represents the depositional age of the fluvial sediments that preceded the lake outburst flood, (and hence places a maximum age on the catastrophic flood). Clasts sampled from mega-ripples in the Kurai Basin are shown to have a mid-to-late Holocene burial age, which is not consistent with the possible origin of these features during a catastrophic drainage of a glacier-dammed lake. Instead, the burial age of the Kurai Basin sediments may reflect local-scale periglacial or seismic processes along the Kurai Fault Zone. 相似文献
12.
Single grain optical dating of glacigenic deposits 总被引：4，自引：0，他引：4
Determining the age of glacigenic sediments is difficult for many geochronological methods because of the lack of suitable materials for analysis. Luminescence dating can be applied to the mineral grains making up the glacigenic sediments. However a major source of uncertainty in previous studies has been whether the mineral grains were exposed to sufficient daylight prior to deposition for the luminescence signal to be reset. Measurements of the optically stimulated luminescence signal from single sand-sized quartz grains offers the potential for explicitly identifying if a sediment contains grains that were not exposed to sufficient daylight to reset their signal. Statistical analysis of the resulting data can then reject those grains to allow the age of the sample to be determined. This study is the first to apply single grain optical dating to glacigenic sediments, and demonstrates the issues involved by analysis of samples from Chile and Scotland. Ages from 2.4±0.5 to 17.3±1.5 ka are produced. Comparison of the results with independent age control suggests that the ages are reliable. The results also show that the extent of bleaching at deposition varies considerably from one sample to another. For the most incompletely bleached sample, luminescence measurements based on the average of many hundreds or thousands of grains would have overestimated the age of the sample by 60 ka, but the single grain method proposed here was able to reliably date it. 相似文献
13.
The accuracy of optical ages derived from tidal sediments depends largely upon the transport processes. These processes constrain the degree of bleaching by the time of deposition and the choice of grain size for dating. This study looks at flow regime, sediment bedding, particle size and suspended sediment concentration (SSC) over tidal flats in order to identify the tidal sub-environment from which reliable multigrain optical ages are most likely to be achieved. The resulting conceptual model is then compared with empirical OSL data obtained from Holocene sediments of the southern North Sea tidal coastal plain of continental Europe. Optical dating of the tidal sediments included single-aliquot-regenerative dose protocol applied to multigrain aliquots of fine sand and fine silt, statistical analysis using weighted skewness, standardised kurtosis and over-dispersion. It is inferred from the model that smaller grains should be better bleached than larger grains. However, because transport and deposition processes are extremely variable in both space and time, unequivocal “bleaching rules” could not be assigned to a particular tidal sub-environment. In this context more than 85% of our samples return accurate ages and around 13% of our optical ages are overestimated when compared with ages from established well-constrained stratigraphic frameworks. The empirical study confirms the concept of “variable bleaching rules”: both accurate and inaccurate ages are obtained from silty and sandy OSL samples regardless of the sub-environment and well-bleached samples may be obtained from all tidal sub-environments. Although our study is based on multiple-grain aliquots it also shows that an independent statistical treatment of equivalent dose data is an indispensable procedure to detect and correct for insufficient bleaching. 相似文献
14.
Middle to late Holocene alluvium, identified as Quaternary alluvial unit 4 (Qa4), along Kanab Creek in southern Utah, USA was dated using optically stimulated luminescence (OSL) on quartz sand, and by radiocarbon dating of detrital charcoal. Entrenchment beginning in 1882 AD created arroyo walls that expose up to 35 m of the Qa4 alluvium. The stratigraphy and sedimentology suggest that fluvial aggradation along the study reach occurred rapidly. Due to the high sediment supply, short transport distances and semi-arid climate with flashy discharge, partial bleaching (zeroing) of the luminescence signal was expected to be a problem for OSL dating. We approached this problem by first using small-aliquot (∼20 grains) and single-grain dating of quartz sand to reduce the number of grains contributing to the OSL signal. Second, we used statistical parameters based on single-grain and small-aliquot equivalent dose (De) distributions of bleached sediment to help identify partial bleaching and to inform if a minimum age model (MAM) should be used for age calculation. Comparison of results with radiocarbon ages demonstrates the success of OSL dating on Kanab Creek arroyo-fill deposits, although careful attention should be paid to the sedimentary facies and stratigraphy of the targeted sample horizon to minimize the effects of partial bleaching. Thin, decimeter-scale plane-bedded and ripple cross-bedded sandy lithofacies were found to be the best target for OSL dating, as these sediments showed minimal evidence for incomplete solar resetting. Additionally, results generally indicate that better-bleached sediments are found in downstream reaches. Age control from these arroyo-fill deposits was acquired in order to fulfill larger research goals of understanding regional arroyo incision and aggradation cycles. 相似文献
15.
We present a multiple luminescence signal measurement procedure that simultaneously measures six different luminescence signals from a single polymineral aliquot (i.e. multiple-signal, short MS-SAR approach). The six signals show different bleaching rates in bleaching experiments, ranging from rapid bleaching for the quartz dominated blue stimulated luminescence signal (measured at 125 °C, BSL-125), to the slow-bleaching polymineral thermoluminescence signal. The bleaching rate of the infrared stimulated luminescence (IRSL) measured at room temperature (IR-25) and elevated temperature post-IR IRSL (pIRIR-90, pIRIR-155, pIRIR-225) signals decrease with increasing measurement temperature. Owing to these different bleaching rates, the MS-SAR approach allows inference of the degree of bleaching, and thereby information on the transport history of sediments. We test this approach by applying the MS-SAR to four coastal samples from a well-monitored sand-nourishment site at the Dutch coast. Our results show that the proposed MS-SAR approach can be utilised to construct bleaching plateaus which provide an independent and time-effective measure of the degree of poor bleaching in a sediment sample based on the measurement of only a few large aliquots. We propose that the MS-SAR protocol can be used to profile the age, luminescence properties and degree of bleaching of minimal prepared polymineral. This pre-profiling will allow the selection of suitable samples for full luminescence dating analysis in a target-orientated and time-effective manner. 相似文献
16.
RESIDUAL POST-IR IRSL SIGNALS OF POTASSIUM FELDSPAR FROM MODERN SAG POND DEPOSITS OF CENTRAL ALTYN TAGH FAULT: IMPLICATION FOR DATING YOUNG PALEOSEISMIC EVENTS 
下载免费PDF全文
下载免费PDF全文 The Altyn Tagh Fault(ATF)is one of the most prominent active strike-slip faults in the India-Eurasia collision. Fresh features of surface ruptures, which are attributed to seismic events taking place in the last millennium, are identified at several sites along the Che'erchen River to Qingshui River section on the central part of ATF. Accurate chronology of these earthquake events would help understand the spatial-temporal relationship of the recent earthquakes. However, great difficulties are encountered. The central ATF is located in the arid area, and the vegetation cover is so limited that rare organic materials appropriate for radiocarbon dating can be found in the sediments. Luminescence dating technique may serve as an alternative to directly determine the burial ages of the earthquake related sediments. The optically stimulated luminescence(OSL)signal of quartz, which has been widely employed for luminescence dating, displays unwanted charateristics for accurate dating. Firstly, the quartz OSL signal is not sensitive to irradiation, which leads to low signal-to-noise ratio or even no measurable quartz OSL signal. Secondly, the targeted samples of the last millennium are very young, and the radiation dose received during the burial is expected to be less than 3~4Gy, which futher deteriorates the signal-to-noise ratio of the quartz OSL signal. Therefore, quartz OSL signal is not appropriate for dating the sediments relevant to the recent earthquakes on ATF.
The infrared stimulated luminescence(IRSL)signal of potassium feldspar is an alternative, and it is in usual an order of maginitude more sensitive to raidation than the quartz OSL signal. The enhanced signal-to-noise ratio makes it applicable to young samples. The post-IR IRSL signal has been successfully applied to date the sediments beyond the Holocene, however, the relatively slow bleaching of the post-IR IRSL signal poses challenges on applying it to young sediments, especially for the sediments deposited during the last millennium. In this study, we investigated the feasibility of using post-IR IRSL signal from potassium feldspar to date the earthquake events of the last millennium by employing modern sag pond deposits with different sorting and expected equivalent dose(De)of 0Gy. Choosing an appropriate measurement procedure and identifying the well bleached pottassium feldspar grains are essential for post-IR IRSL dating of young sediments. The non-fading characteristic of the post-IR IRSL170 signal measured at 170℃ following a prior IR stimulation at 110℃ was verified by employing the De plateau test with respect to the signal integration interval and IR stimulation temperature together. Reducing the amount of potassium feldspar grains mounted on an aliquot would help reveal the among grains variation of bleaching level of post-IR IRSL170 signal before depostion and identify the most sufficiently bleached grains. Therefore, the post-IR IRSL170 De values of 2mm aliquots were measured for three samples with different sedimentary textures. The median of De distribution of well sorted and stratified sag pond deposits is consistent with the minimum De value inferred from the minimum age model(MAM-3) and finite mixture model(FMM), while for the poorly sorted deposits, the median is significantly overestimated compared with the minimum De values from the MAM-3 and the FMM. The minimum De values of 0.6~0.8Gy of all three samples are consistent with the unbleachable residual dose previously reported for post-IR IRSL signals measured at similar temperature for well bleached samples. It implies that by combined use of small aliquot and statistical age models, the well-bleached potassium feldspar grains could be identified. Such an intrinsic unbleachable component needs to be properly corrected when earthquake events of last millennium are to be dated in this area. Otherwise, the post-IR IRSL170 age would be overestimated by 200~300a.
The post-IR IRSL170 procedure investigated in this study is not only applicable for dating the paleoearthquake events along the Altyn Tagh Fault, but also with great potential to be applied to other tectonically active area. With consideration of the potential variability in post-IR IRSL signal characteristics of potassium feldspar grains from different origins, the signal stability needs to be routinely inspected. The modern analog sample would also be informative for justifying the measurement procedure and analytical method employed. 相似文献
The infrared stimulated luminescence(IRSL)signal of potassium feldspar is an alternative, and it is in usual an order of maginitude more sensitive to raidation than the quartz OSL signal. The enhanced signal-to-noise ratio makes it applicable to young samples. The post-IR IRSL signal has been successfully applied to date the sediments beyond the Holocene, however, the relatively slow bleaching of the post-IR IRSL signal poses challenges on applying it to young sediments, especially for the sediments deposited during the last millennium. In this study, we investigated the feasibility of using post-IR IRSL signal from potassium feldspar to date the earthquake events of the last millennium by employing modern sag pond deposits with different sorting and expected equivalent dose(De)of 0Gy. Choosing an appropriate measurement procedure and identifying the well bleached pottassium feldspar grains are essential for post-IR IRSL dating of young sediments. The non-fading characteristic of the post-IR IRSL170 signal measured at 170℃ following a prior IR stimulation at 110℃ was verified by employing the De plateau test with respect to the signal integration interval and IR stimulation temperature together. Reducing the amount of potassium feldspar grains mounted on an aliquot would help reveal the among grains variation of bleaching level of post-IR IRSL170 signal before depostion and identify the most sufficiently bleached grains. Therefore, the post-IR IRSL170 De values of 2mm aliquots were measured for three samples with different sedimentary textures. The median of De distribution of well sorted and stratified sag pond deposits is consistent with the minimum De value inferred from the minimum age model(MAM-3) and finite mixture model(FMM), while for the poorly sorted deposits, the median is significantly overestimated compared with the minimum De values from the MAM-3 and the FMM. The minimum De values of 0.6~0.8Gy of all three samples are consistent with the unbleachable residual dose previously reported for post-IR IRSL signals measured at similar temperature for well bleached samples. It implies that by combined use of small aliquot and statistical age models, the well-bleached potassium feldspar grains could be identified. Such an intrinsic unbleachable component needs to be properly corrected when earthquake events of last millennium are to be dated in this area. Otherwise, the post-IR IRSL170 age would be overestimated by 200~300a.
The post-IR IRSL170 procedure investigated in this study is not only applicable for dating the paleoearthquake events along the Altyn Tagh Fault, but also with great potential to be applied to other tectonically active area. With consideration of the potential variability in post-IR IRSL signal characteristics of potassium feldspar grains from different origins, the signal stability needs to be routinely inspected. The modern analog sample would also be informative for justifying the measurement procedure and analytical method employed. 相似文献
17.
Holocene flood events in the Yangtze River are associated with variations in East Asian Summer Monsoon (EASM) precipitation, and so Yangtze delta sediments may preserve information about the frequency and magnitude of EASM precipitation. These flood/drought cycles of the EASM directly affect the living standards of East Asian population. However, despite its importance, little chronological control is available for the Yangtze Delta sediments; because biogenic carbonate only occurs sporadically, it has proved the difficulty to discuss sedimentation mechanisms and rates in any detail.In 2013 two sediment cores (YD13-G3 and H1) were taken from the Yangtze subaqueous delta to investigate precipitation history. In this study, we investigate the potential of quartz OSL dating of the fine silt fraction (fine-grained quartz; 4–11 μm) from these cores to estimate the depositional age of the sediments. We test whether: (1) Yangtze subaqueous delta sediments contain quartz with suitable characteristics for dating, and (2) quartz grains are well-bleached during/before the transportation process, by examining a modern analogue of suspended particulate matter, and by cross-checking with the doses derived from infrared stimulated luminescence (IRSL) signals (both IR50 and pIRIR160) from feldspar in polymineral fine grains. We find that both the quartz and feldspar luminescence characteristics are satisfactory (quartz dose recovery ratio 1.067 ± 0.004; n = 250, pIRIR160 dose recovery ratio 1.01 ± 0.02; n = 151). Modern suspended particulate matter has measured quartz equivalent doses between 0.1 and 0.2 Gy, suggesting that this material was sufficiently bleached during/before transportation to allow dating of Holocene sediments (mean dose rates of ∼3 Gy ka−1). OSL ages of 44 samples from the 2 cores show apparently rapid accumulation at ∼6 ka between 9.65 and 5.50 m in core H1 and ∼2 ka throughout core G3 and between 5.0 and 0.0 m in core H1. The pIRIR160 signals suggest less light exposure of the core top sediments and of those from the transition layer between ∼6 ka to ∼2 ka, although there is no evidence for incomplete bleaching of quartz. The question remains as to whether significant deposition took place only at these two times, or whether the record has been disturbed by erosion/reworking. 相似文献
18.
19.
Testing the application of quartz and feldspar luminescence dating to MIS 5 Japanese marine deposits
The applicability of both quartz and feldspar luminescence dating was tested on twenty-five samples from a marine succession now forming a coastal cliff at Oga Peninsula, Honshu Island, Japan. The quartz optically stimulated luminescence (OSL) signal shows thermal instability and linear modulated (LM)-OSL analysis revealed the dominance of a slow component. When compared with independent age control provided by two marker tephras, the quartz OSL ages grossly underestimate the depositional age. In contrast, potassium (K)-rich feldspar is a suitable dosimeter when measured using post-IR infrared stimulated luminescence (IRSL) at 225 °C (pIRIR225). Scanning electron microscope (SEM) analyses on the feldspar extracts revealed that the grains are amorphous with small crystalline inclusions; using standard internal dose rate parameters, this would result in a too large dose rate. Dose rates were calculated using the observed grain size of 40 ± 20 μm with an assumed K concentration of 12.5 ± 0.5%. The fading corrected pIRIR225 ages agree well with independent age control, and the sediments of the Katanishi Formation were deposited between 82 ± 6 and 170 ± 16 ka. This study demonstrates that pIRIR dating of feldspar is a powerful chronological tool for the dating of sediments of volcanic origin. 相似文献
20.
Optical dating was applied to two loess-paleosol sections (Lujiaowan and Shuixigou) from the northern piedmont of Tianshan Mountain, Xinjiang province, China. The two sections are over 200 km apart and have a similar depositional sequence, which consists of two paleosol layers embedded by one loess layer. Two difficulties were met in optical dating. First, because the sections are located on the slope of the mountain, it was found that some cliff debris, with coarse grains (>200 μm), were mixed with the eolian sediments by rainfall, especially in the paleosol layers. Second, the optically stimulated luminescence (OSL) signals of quartz grains from the deposits were too dim to obtain a reliable equivalent dose (De). The 63–90 μm K-feldspar grains were separated to decrease the debris portion, and they yielded bright infrared stimulated luminescence (IRSL) signals. A multiple-elevated-temperature post-IR IRSL (MET-pIRIR) procedure was applied to determine De. Comparing the optical dating ages of the two sections, the Lujiaowan (LJW) and Shuixigou (SXG) sections recorded almost the same depositional process during the Holocene. The ages of the two loess layers (2.44–3.38 ka at LJW; 2.47–4.36 ka at SXG) suggested that one drought event happened widely in this westerly dominated area. The same drought event 2.5–3.5 ka ago also happened in the Chinese Loess Plateau (CLP), where the summer monsoon dominated. However, the paleosol development period (6.6–4 ka) in the study area was distinguished from the monsoon dominated area (8–4 ka), which suggests an arid early Holocene in the westerly area. 相似文献