共查询到18条相似文献，搜索用时 500 毫秒
1.
湘南柿竹园矽卡岩型-云英岩型钨多金属矿田是中国最重要的钨多金属矿产资源基地之一。前人对该矿田的矽卡岩型成矿开展了系统的研究,而对矿田内云英岩型钨矿化研究薄弱,制约了矿田内成矿理论的认识和矿产勘查部署。通过野外调查,文章系统总结了矿田内云英岩型矿化样式、空间分布、矿化特征和控矿因素。研究显示柿竹园矿田内云英岩型矿体包含4种矿化样式：第一期斑状黑云母花岗岩中云英岩型矿体、石英斑岩中云英岩型矿体、第二期黑云母花岗岩中云英岩型矿体和矽卡岩-网脉状云英岩复合型矿体。这4种样式的云英岩型钨多金属矿体是柿竹园矿田内不同阶段的花岗岩成矿的产物。白钨矿化学成分显示矽卡岩型矿化的白钨矿低Mo,而云英岩型矿化白钨矿富Mo,指示云英岩矿化较矽卡岩矿化具有更氧化的环境。柿竹园矿田矿化格局显示云英岩型矿化受矿田和矿床尺度的花岗岩体侵位前锋控制,矿田尺度表现为岩体由北东深部向南西浅部侵位,千里山岩体南部为岩体侵位的前锋,岩体南部发育较大规模的云英岩矿体;矿床尺度上,云英岩体的定位受控于花岗岩岩突的控制。此外,矿田菱形格状构造对岩突产出位置具有重要的控制作用,也具有重要勘查指示意义。结合矿田控矿构造格局、不同期次岩浆岩对云英岩的控制及地球化学异常特征,笔者提出了大吉岭、柿竹园深部和柴山深部3处云英岩型钨多金属矿找矿预测靶区。 相似文献
2.
柿竹园矽卡岩型钨锡钼铋矿床主要造岩矿物中REE的分布特征及成岩意义 总被引：2，自引：0，他引：2
通过对柿竹园矽卡岩型钨锡钼铋矿床中主要造岩矿物、矿化围岩和成矿母岩中稀土元素分市特征的分析对比，得出该矽卡岩的形成是以轻稀土富集为特征约余田桥组含泥质条带灰岩与富含重稀土且强烈亏损铕的千里山花岗岩流体相互作用的产物。稀土元素在矽卡岩中的分布和分配明显地受到被交代原岩中的稀土含量、流体中的稀土组成和矽卡岩矿物本身容纳稀土的能力等因素控制。 相似文献
3.
笔者从长期野外地质观察,对柿竹园钨多金属矿床成岩成矿作用提出了新的认识。花岗岩体由燕山期地壳重熔的再生岩浆,经5次侵入而成。其中第一次γ_5~(2-1)细粒斑状黑云母花岗岩对本矿床形成起决定作用;含矿云英岩脉是由各种花岗岩脉,通过含矿气水溶液交代改造而成;面型云英岩是γ_5~(2-1)岩浆演化到后期气水溶液在岩体顶部富集交代的结果;并认为造成早期矽卡岩的动力是熔融硅铝层的“岩汁”和首次熔融γ_5~(2-1)岩浆所产生的气化物;晚期复杂矽卡岩的形成是γ_5~(2-1)岩浆侵入演化时所产生的气液交代早期矽卡岩形成。 相似文献
4.
5.
《吉林大学学报(地球科学版)》2015,(Z1)
<正>1矿床地质概况柿竹园超大型钨多金属矿床位于湖南省郴州市东南郊,矿田内出露地层主要为泥盆系中、上统碎屑岩和碳酸盐岩以及少量震旦系变质石英砂岩。花岗岩质岩浆活动大体分为3大类,千里山碱长花岗岩岩体、岩枝和岩脉以及成矿后的花岗斑岩等。岩枝和岩脉与岩体相连,是岩浆自岩体中分离沿NE向断裂充填的结果,其中富含石榴子石、萤石、黑钨矿等副矿物。岩体顶部接触带发育似伟晶岩壳和块状云英岩(矿体)。主要矿化类型为矽卡岩型,少量块状云英岩型,在矿床外围泥盆系灰岩中发育大规模的脉状铅锌矿。矽卡 相似文献
6.
江西朱溪铜钨矿床成因:来自矿物学和年代学的启示 总被引：1，自引：0，他引：1
江西景德镇朱溪铜钨矿床是近年来发现的一个世界级超大型铜钨矿床。矿床地质特征、矽卡岩矿物学和成矿岩体年代学的研究表明,矿体赋存于上石炭统黄龙组大理岩与新元古界双桥山群变质岩之间的不整合界面之上,空间上具有明显的矿物组合分带特征。根据矽卡岩产状、矿物共生组合和相互关系,把成矿作用划分为矽卡岩阶段、退化蚀变阶段、石英-硫化物阶段、碳酸盐-萤石阶段。代表性的矽卡岩矿物组合有石榴子石、透辉石、透闪石、硅灰石、符山石、蛇纹石、绿泥石等。电子探针分析表明,石榴子石为钙铝榴石—钙铁榴石系列,辉石为透辉石—钙铁辉石系列。同位素年代学及岩浆与成矿关系的研究表明：花岗闪长岩与早期矽卡岩型矿化相关,矿化范围较小,矿石品位较低;黑云母花岗岩与云英岩型和晚期矽卡岩型的矿化相关,矿化范围较广,矿石品位较高,并获得黑云母花岗岩LA-ICP-MS锆石U-Pb年龄为（147.7±2.2）Ma。综合分析指出,朱溪铜钨矿床为晚侏罗世花岗岩浆有关的热液与晚古生代碳酸盐岩发生多阶段交代作用而形成,成矿作用以矽卡岩型和云英岩型为主。 相似文献
7.
与碱性花岗岩有关的稀有稀土矿床 总被引：2，自引：0，他引：2
概述了含矿碱性花岗岩产出的地质背景，含矿岩体的主要特征。根据岩石中暗色矿物与主要成矿元素的关系，将碱性花岗岩矿床划分为３种矿化类型：含Ｎｂ（Ｓｎ）黑云母花岗岩；含Ｎｂ（Ｓｎ）、ＨＲＥＥ钠铁闪石－钠闪石花岗岩；含ＬＲＥＥ霓石花岗岩，并指出，碱性花岗岩矿床在我国北部边区和攀西裂谷带具有良好的成矿前景。 相似文献
8.
湖南金船塘矿区矽卡岩矿物及Sn元素在绿帘石中的分布特征 总被引：3，自引：0，他引：3
金船塘矿区位于千里山花岗岩岩体西侧, 与东侧柿竹园矿区均是湖南柿竹园特大型W-Sn-Mo-Bi矿床目前正在开采的重要矿区.该矿区块状矽卡岩的矿物特点是: 石榴子石以钙铝石榴子石为主, 辉石存在透辉石-钙铁辉石连续系列, 长石以钙长石大量产出为特点, 硅灰石出现了不常见的锰铁硅灰石; 绿帘石中普遍含Sn, SnO2含量0.2%~2%.根据绿帘石中Sn元素的详细测定和计算, 查明Sn元素在绿帘石中含量与在矿物中位置具幂律函数关系, 计算的分形维为1.93, 从矿物微观的尺度确认Sn等成矿元素在运移和分布上具分形时-空结构, 从而证实自组织的临界状态是柿竹园特大型多金属矿床动力学的基本特点. 相似文献
9.
湖南柿竹园钨多金属矿床成矿机理的实验研究 总被引：3，自引：1，他引：3
作者在深入柿竹园钨多金属矿床野外地质工作的基础上，采用矿区燕山期花岗岩和泥盆系灰岩作为试料，在含ｐＨ＝４．０的０．３ＭＮａＣｌ＋０．７ＭＫＦ水溶液的高压釜中持续了１２０小时的交代作用。实验的结果表明了：在４００～７００℃的温度和２５０×１０５～９００×１０５Ｐａ的压力下，形成的交代岩及其钨、锡、钼、铋矿物基本上与矿区的矽卡岩及其矿石矿物共生组合相吻合，揭示了湖南柿竹园矽卡岩型钨多金属矿床成矿的机理 相似文献
10.
根据龙陵东部花岗岩岩体穿插关系及同位素年龄,花岗岩作用可分为3期8个阶段,3个中心。主要岩石类型是黑云母二长花岗岩和白云母花岗岩。花岗岩的成因类型为壳源重熔型和变质交代型。 岩浆演化从早阶段到晚阶段,随酸碱度增加锡逐渐富集成矿。主要矿化类型有:含锡及稀有金属花岗岩,含锡及稀有金属伟晶岩,含锡矽卡岩和角岩型,锡石—黑钨矿—电气石石英脉和含锡多金属硫化物型。 相似文献
11.
《International Geology Review》2012,54(11):1020-1039
The Shizhuyuan deposit is the largest among the economically important polymetallic tungsten deposits in China. The deposit occurs within the thermal aureole of Yanshanian felsic intrusions that were emplaced into Devonian carbonates and marls. The mineralization can be divided into three phases that are genetically associated with three episodes of granitic emplacement-pseudoporphyritic biotite granite, equigranular biotite granite, and granite porphyry. During the emplacement of pseudoporphyritic biotite granite, thermal metamorphism and subsequent skarnization developed around the stock. The pure limestone was transformed to marble, whereas marls and argillite interlayers were changed to a series of metamorphic rocks such as grossular-diopside hornfels, wollastonite hornfels, diopside hornfels, wollastonite-vesuvianite hornfels, muscovite-K-feldspar-anorthite hornfels, and prehnitevermiculite hornfels. Because of the subsequent strong skarn development, most hornfelses later were transformed into skarns. The skarns distributed around the granite stock are mainly calcic. They are massive in structure, and are composed mainly of garnet, pyroxene, vesuvianite, and wollastonite, with interstitial fluorite, scheelite, and bismuthinite. Although there is no cassiterite in the early skarns, their tin contents average 0.1%. The distribution and compositional and mineralogical relationships of skarn minerals suggest that they formed as a result of progressive reactions of a hydrothermal solution with a limestone of generally constant composition, and that the dominant process was progressive removal of Ca and addition of other constituents to the rocks. Following the primary skarn formation, some of the assemblages were retrograded to new assemblages such as fluorite-magnetite-salite rock, magnetite-fluorite-amphibole rock, and magnetite-fluorite-chlorite rock. The retrograde alteration of the skarns is characterized by a progressive addition of fluorine, alkali components, silica, tin, tungsten, and bismuth. A zonation from garnet-pyroxene skarn or garnet skarn, through fluorite-magnetite-salite rock, to magnetite-fluorite-chlorite rock frequently can be recognized in the deposit. All retrograde-altered rocks contain scheelite, cassiterite, molybdenite, and bismuthinite. During the emplacement of equigranular biotite granite, skarn veins several tens of centimeters wide were developed; they contain large crystals of garnet and vesuvianite, and interstitial scheelite, wolframite, cassiterite, and molybdenite. This second stage of mineralization occurs predominantly as coarse and fine stockwork greisens, which were superimposed on the massive skarns and surrounding marble. Such W-Sn-Mo-Bi-bearing greisens can be divided into topaz greisen, protolithionite greisen, muscovite greisen, and margarite greisen. Besides calcic skarn veins and greisens, manganese skarn veinlets also were developed; they consist of rhodonite, spessartine-almandine solid solution, spessartine, and helvite. The distribution of greisens is responsible for a metal zonation—i.e., W-Sn-Mo-Bi and Sn-Be-Cu-F zones from the contact boundary between the granite stock and skarns outward in the deposit. A third stage of mineralization is represented by lead-zinc veins, which also are accompanied by manganese skarns consisting of spessartine, rhodonite, manganese-rich pyroxene, helvite, tephroite, fluorite, tourmaline, and manganese-rich phlogopite. 相似文献
12.
浆液过渡态流体在矽卡岩型钨矿成矿过程中的作用——以湖南柿竹园钨锡多金属矿为例 总被引：9，自引：2，他引：7
湖南杮竹园是世界著名的大型矽卡岩型锡钨多金属矿床,产于千里山碱长花岗岩岩体南部接触带。矽卡岩中广泛发育网脉状碱交代脉和少量花岗岩脉、云英岩脉等各类脉体。碱交代脉主体由钾长石、萤石、少量石英、磁铁矿、黑钨矿、白钨矿及花岗岩构成,以往被统称为"云英岩脉"。其中早阶段碱交代脉中央发育花岗岩,边部为钾长石-萤石-黑钨矿,脉体两侧发育石榴子石透辉石矽卡岩化,对应矽卡岩阶段。晚阶段碱交代脉主要成分为钾长石、萤石,脉体及两侧出现大量阳起石、绿帘石、磁铁矿、白钨矿及辉钼矿、辉铋矿、自然铋等,对应退变质氧化物阶段。空间上,碱交代脉分布于矽卡岩和矽卡岩化大理岩中,不进入岩体。自花岗岩体→岩脉→碱交代脉→矽卡岩,Ca O、Ti O2、成矿元素W、Bi、Mo、Cu、Pb、Zn以及Sr、Ba等元素含量增高,显示出成矿元素向热液中富集,且岩浆和矽卡岩受到碳酸盐岩围岩的影响。碱交代脉的组构显示出其形成于富含成矿物质和挥发份流体的岩浆,其中广泛发育熔融包裹体和熔流包裹体,显示其浆液过渡态流体的成因性质。从岩浆晚期分异演化→热液阶段是连续演化的过程,块状云英岩和矽卡岩阶段,岩浆并未完全固结,成矿作用自岩浆固结之前已经开始。总结了杮竹园矿床成矿模型:碱长花岗岩岩浆演化晚期分异出的高度富含挥发份的熔浆,在岩体顶部聚集,部分形成似伟晶岩(壳)和块状云英岩以及条带状硅灰石符山石矽卡岩。进一步聚集以及矽卡岩化产生大量CO2引起大规模隐爆,富含挥发份的岩浆或浆液过渡态流体沿隐爆形成的碎裂裂隙进入碳酸盐岩围岩,与碳酸盐岩不断发生反应,在脉体边部形成钾长石化以及大范围的石榴子石透辉石矽卡岩化。至退变质氧化物阶段,随着岩浆冷凝和温度、压力的降低,地下水大范围参与,成矿流体逐渐转变为热液性质,形成大量阳起石、磁铁矿、白钨矿及钼、铋硫化物。硫化物阶段,大量的大气降水参与成矿,温度、盐度进一步降低,在矽卡岩及其外侧的碳酸盐岩中形成铅锌硫化物矿石。 相似文献
13.
内蒙古朝不楞铁铜锌铋矿床位于二连浩特-东乌旗多金属成矿带的东段,其矿化蚀变沿着花岗岩体与围岩的接触带分布。在外接触带,大理岩热液蚀变形成了进化矽卡岩,由石榴子石、辉石、硅灰石和方解石组成,泥质砂岩蚀变成角岩,由角闪石、黑云母、长石和石英组成。矽卡岩或角岩经退化蚀变形成了铁氧化物矿化,由磁铁矿、磁赤铁矿和镜铁矿组成,伴随有绿帘石、方解石、萤石和黑云母蚀变;晚期热液退化蚀变形成了硫化物,由黄铜矿、白铁矿、黄铁矿、辉钼矿、闪锌矿、辉铋矿和自然铋组成,伴随有透闪石、绿泥石、萤石、石英和方解石蚀变。在内接触带,花岗岩的热液蚀变形成了钾化,由钾长石、黑云母和少量石榴子石组成,随后被退化绿帘石、方解石和少量磁铁矿交代;晚期退化蚀变形成了硫化物脉,伴随有黑云母、方解石、石英和萤石蚀变。流体包裹体爆裂温度结果表明,该矿床形成于浅成（1.7~3.5 km）、高温环境,成矿热液具有从高温向低温多阶段演化的冷却史。矿床的地质、矿物组合特征及成矿物理化学条件显示出该矿床属于浅成、高温、近端的矽卡岩型矿床。 相似文献
14.
安徽贵池铜山矽卡岩型铜矿床蚀变矿化分带特征及其成因 总被引：6，自引：1，他引：5
铜山矽卡岩型铜矿床产于长江中下游铁铜成矿带中的安庆—贵池矿集区。研究区矽卡岩化与矿化发生于碳酸盐岩地层与花岗闪长斑岩间的接触带中,蚀变及矿化具有水平与垂向分带特征。水平方向上,靠近岩体的矽卡岩中石榴子石含量较高,远离岩体的矽卡岩中透辉石含量较高;靠近大理岩带发育钙铁辉石矽卡岩,远离大理岩带的灰岩硅化较强。垂向上,从上到下依次为角岩带、钙质矽卡岩带和镁质矽卡岩带。矿物成分研究表明,靠近岩体处氧化性较强,石榴子石的钙铁榴石端员含量高;铜多富集于含石英脉的岩体、距岩体略远的矽卡岩、角岩或大理岩中,而锌多富集于硅化灰岩及远离岩体的矽卡岩中。研究表明,该矿床中蚀变矿化经历了进变期和退变期,包括接触热变质阶段、进化交代阶段和早退化蚀变阶段、晚退化蚀变阶段。其中,大规模的黄铜矿化主要发生于早退化蚀变阶段,且在岩浆演化晚期进一步富集于斑岩石英脉中。 相似文献
15.
The skarn‐type tungsten deposit of the Date‐Nagai mine is genetically related to the granodiorite batholith of the Iidateyama body. Skarn is developed along the contact between pelitic hornfels and marble that remains as a small roof pendant body directly above the granodiorite batholith. Zonal arrangement of minerals is observed in skarn. The zonation consists of wollastonite, garnet, garnet‐epidote, and vesuvianite‐garnet zones, from marble to hornfels. Sheelite is included in garnet, garnet‐epidote, and vesuvianite‐garnet zones. The oxygen isotope values of skarn minerals were obtained as δ18O = 4.2–7.7‰ for garnet, 5.9–6.9‰ for vesuvianite, ?0.3–3.4‰ for scheelite, 6.0–10.9‰ for quartz, and 8.2‰ for muscovite. The temperature of skarn‐formation was calculated from oxygen isotopic values of scheelite‐quartz pairs to be 288°C. Calculated oxygen isotope values of fluid responsible for skarn minerals were 6.1–9.5‰ for garnet, 1.2–4.8‰ for scheelite, ?1.3‐3.6‰ for quartz, and 4.5‰ for muscovite. Garnet precipitated from the fluids of different δ18O values from scheelite, quartz, and muscovite. These δ18O values suggest that the origin of fluid responsible for garnet was magmatic water, while evidence for the presence of a meteoric component in the fluids responsible for middle to later stages minerals was confirmed. 相似文献
16.
Geological and fluid inclusion studies of the Dongpo tungsten skarn ore deposit,China 总被引：1，自引：0，他引：1
The Dongpo tungsten ore deposit, the largest scheelite skarn deposit in China, is located at the contact of a 172-m. y. biotite
granite with a Devonian marble. The mineralization associated with the granite includes W, Bi-Mo, Cu-Sn and Pb-Zn ores. Several
W mineralization stages are shown by the occurrence of ore in massive skarn deposits and in later cross-cutting veins. The
high garnet/pyroxene ratio, the hedenbergite and diopside-rich pyroxene and the andradite-rich garnet show the deposit belongs
to the oxidized skarn type. Detailed fluid inclusion studies of granite, greisen, skarn and vein samples reveal three types
of fluid inclusion: (1) liquid-rich, (2) gas-rich and (3) inclusions with several daughter minerals. Type (3) is by far the
most common in both skarn and vein samples. The dominant daughter mineral in fluid inclusions is rhembic, highly birefringent,
and does not dissolve on heating even at 530°C. We assume that this mineral is calcite. The liquid phase in most of the fluid
inclusions has low to moderate salinities: 0–15 wt. %; in a few has higher salinities (30–40 wt. % NaCl equivalent). The homogenization
temperatures of inclusions in the skarn stage range from 350°C to 530°C, later tungsten mineralization-stage inclusions homogenize
between 200°C and 300°C, as do inclusions in veins. Fluid inclusions in granite and greisen resemble those of the late tungsten
mineralization stage, with low salinity and homogenization temperatures of 200°–360°C. The tungsten-forming fluids are probably
a mixture that came from biotite granite and the surrounding country rocks. 相似文献
17.
江西永平铜矿床蚀变矿化分带、矿石组构及成矿过程 总被引：2，自引：0，他引：2
江西永平铜矿床位于江山-绍兴断裂带南缘、北武夷山燕山早期岩浆岩与海西期-印支期信江断裂坳陷带接合带,是一个伴生S-W-Pb-Zn多矿种的层状铜矿床。逆冲推覆构造控制着矿区内晚古生代地层、燕山期岩浆岩及矿体的空间分布,即基底周潭群逆冲推覆到晚古生界地层上,燕山早期黑云母花岗岩-花岗闪长岩、石英斑岩、花岗斑岩等沿逆冲推覆断面侵入,矿体呈层状产在矽卡岩化石炭系叶家湾组中。矿体围岩主要是石榴石矽卡岩、千枚状页岩及矽卡岩化大理岩。本文从矽卡岩分带、矿石组构等方面来刻画永平铜矿成矿精细过程。永平铜矿矿区的探采工程揭示,以火烧岗岩体为中心向外,蚀变矿物组合、石榴石颜色及矽卡岩的含矿性等表现出明显的分带规律,即从岩体到围岩有:石榴石→透辉石→硅灰石矽卡岩矿物分带;红色→棕色→绿色的石榴石颜色分带;矽卡岩含矿性先增加后降低,其中矿体主要在(红)棕色石榴石矽卡岩呈条带状或网脉状产出。矽卡岩型和变质砂页岩型矿石的矿石矿物组成均与硫化物-石英大脉(～10m)中矿石矿物组成相同或相似,均为黄铁矿-白钨矿-(方铅矿)-闪锌矿-黄铜矿,且生成顺序一致,说明矿区内不同类型的矿石是同一成矿热液体系在不同围岩类型及控矿构造中的产物。永平铜矿成矿过程可划分为石榴石、(磁)赤铁矿阶段、白钨矿阶段、铁铜硫化物阶段、铅锌硫化物阶段和碳酸盐阶段等六个阶段,其中石榴石阶段形成矽卡岩分带,在该阶段晚期形成磁黄铁矿-铁闪石-(黄铜矿)-石英块状矿石;(磁)赤铁矿阶段发育磁铁矿、赤铁矿;白钨矿阶段形成白钨矿及少量黑钨矿;铁铜硫化物阶段是铜硫矿主要矿化阶段,形成块状及脉状黄铜矿矿石;铅锌硫化物阶段是成矿晚期阶段;碳酸盐阶段代表原生成矿过程结束。 相似文献
18.
Shao-Cong Chen Jin-Jie Yu Min-Feng Bi Bernd Lehmann 《Chemie der Erde / Geochemistry》2022,82(1):125856
It remains poorly constrained whether remobilization of Sn from granites and prograde skarns plays an essential role in forming economic (skarn-type) tin mineralization. Using both electron probe microanalysis and laser ablation–inductively coupled plasma–mass spectrometry methods, in-situ Sn contents, as well as major elements, were analyzed for numerous silicates and magnetite from fresh granite, altered granite, and skarn at the large Furong Sn deposit (530,000 t Sn @ 0.8% Sn) in the Nanling Range, South China. Hornblende and biotite in fresh granite are the main Sn-bearing phases (Sn = 44–321 ppm), while plagioclase and K-feldspar are poor in Sn (< 5 ppm). In altered granite, tin is hosted mainly by hydrothermal muscovite (299–583 ppm) replacing plagioclase, but rarely by chlorite (mostly <10 ppm) replacing hornblende and biotite. In contrast, most silicates (garnet, diopside, vesuvianite, pargasite and epidote) and magnetite from tin skarn are Sn-rich (47–44,241 ppm), except for Sn-poor phlogopite and scapolite (< 10 ppm). In particular, garnet, pargasite, and epidote reach tin concentrations in the percent range. Tin generally enters the stannous silicates and magnetite through substitutions for octahedral Alvi and Fe3+. Comparisons of Sn contents between magmatic and hydrothermal minerals in granite, prograde and retrograde minerals related to tin skarn indicate that remobilization of Sn from granite and prograde skarn is not a pre-requisite to form tin mineralization. 相似文献