首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The 3-D P- and S-wave velocity models of the upper crust beneath Southwest Iberia are determined by inverting arrival time data from local earthquakes using a seismic tomo~raphy method. We used a total of 3085 P- and 2780 S-wave high quality arrival times from 886 local earthquakes recorded by a per- manent seismic network, which is operated by the Institute of Meteorology （IM）, Lisbon, Portugal. The computed P- and S-wave velocities are used to determine the 3-D distributions of Vp/Vs ratio. The 3-D velocity and Vp/Vs ratio images display clear lateral heterogeneities in the study area. Significant veloc- ity variations up to ~6% are revealed in the upper crust beneath Southwest lberia, At 4 km depth, both P- and S-wave velocity take average to high values relative to the initial velocity model, while at 12 km, low P-wave velocities are clearly visible along the coast and in the southern parts. High S-wave velocities at 12 km depth are imaged in the central parts, and average values along the coast; although some scattered patches of low and high S-wave velocities are also revealed. The Vp/Vs rztio is generally high at depths of 4 and 12 km along the coastal parts with some regions of high Vp/Vs ratio in the north at 4 km depth, and low Vp/Vs ratio in the central southern parts at a depth of 12 km, The imaged low velocity and high Vp/Vs ratios are related to the thick saturated and unconsolidated sediments covering the region; whereas the high velocity regions are generally associated with the Mesozoic basement rocks.  相似文献   

2.
The aim of this study is to define the Vp and Vp/Vs structure of the fault zone ruptured by the ML 5.1 earthquake of October 15, 1996 which occurred near Reggio Emilia (central-northern Italy). A 1-month-long seismic sequence followed the mainshock and occurred in a small region along the outer border of the northern Apenninic belt, at depth ranging between 10 and 17 km. P- and S-wave arrival times from 304 aftershocks recorded by two local dense seismic arrays installed in the epicentral region have been inverted to obtain one- and three-dimensional velocity models by using state of the art local earthquake tomographic techniques. Velocity models and aftershock relocation help us to infer the seismotectonic of the region. Earthquakes originated along a NW-dipping backthrust of a NE-trending main thrust, composing the western part of the broad Ferrara Arc. A main high Vp and high Vp/Vs region delineates a pop-up structure in the center of the area. The high Vp/Vs within the pop-up structure supports the presence of a zone with increased pore pressure. The hypocentral depth of both mainshock and aftershocks is greater than those usually found for the main seismogenic regions of the Apenninic belt. P-wave velocity values in the seismogenic area, obtained by tomography, are compatible with rocks of the Mesozoic cover and suggest that seismicity occurred within the Mesozoic units stack at present by compressional tectonics.  相似文献   

3.
Several pieces of studies on the January 26, 2001, Bhuj earthquake (Mw 7.6) revealed that the mainshock was triggered on the hidden unmapped fault in the western part of Indian stable continental region that caused a huge loss in the entire Kachchh rift basin of Gujarat, India. Occurrences of infrequent earthquakes of Mw 7.6 due to existence of hidden and unmapped faults on the surface have become one of the key issues for geoscientific research, which need to be addressed for evolving plausible earthquake hazard mitigation model. In this study, we have carried out a detailed autopsy of the 2001 Bhuj earthquake source zone by applying three-dimensional (3-D) local earthquake tomography (LET) method to a completely new data set consisting of 576 local earthquakes recorded between November 2006 and April 2009 by a seismic network consisting of 22 numbers of three-component broadband digital seismograph stations. In the present study, a total of 7560 arrival times of P-wave (3820) and S-wave (3740) recorded at least 4 seismograph stations were inverted to assimilate 3-D P-wave velocity (Vp), S-wave velocity (Vs), and Poisson’s ratio (σ) structures beneath the 2001 Bhuj earthquake source zone for reliable interpretation of the imaged anomalies and its bearing on earthquake hazard of the region. The source zone is located near the triple junction formed by juxtapositions of three Indian, Arabian, and Iranian tectonic plates that might have facilitated the process of brittle failure at a depth of 25 km beneath the KRB, Gujarat, which caused a gigantic loss to both property and persons of the region. There may be several hidden seismogenic faults around the epicentral zone of the 2001 Bhuj earthquake in the area, which are detectable using 3-D tomography to minimize earthquake hazard for a region. We infer that the use of detailed 3-D seismic tomography may offer potential information on hidden and unmapped faults beneath the plate interior to unravel the genesis of such big damaging earthquakes. This study may help in evolving a comprehensive earthquake risk mitigation model for regions of analogous geotectonic settings, elsewhere in the world.  相似文献   

4.
High resolution Vp and Vp/Vs tomography of the Campi Flegrei caldera is obtained using active and passive seismic data. We find a continuous ring of high Vp anomaly that defines the caldera rim associated to the last collapse. A sharp Vp/Vs decrease is observed between 2 and 4 km depth, suggesting the absence of magmatic fluids and the presence of rock volumes with over‐pressured gas within the source region of uplift. Atmospheric water penetrating within the caldera and deep CO2 fluids are presumably heated by a magmatic body located at depth greater than 4 km nested within the limestone layer. Along the fractures bordering the shallow high Vp rim, deep gas and CO2 fluids up‐raise and are released in the Pozzuoli solfatara. We hypothesize that the past unrest episode is more likely due to pressure changes within the shallow geothermal reservoir located at the top of the magma intrusion.  相似文献   

5.
王兆国  刘财  冯晅  秦树洪 《世界地质》2009,28(4):513-519
中国东北地区在北东东向应力场控制下, 地震有其特殊性。地震空间分布和深度统计结果表明, 东北地区地震主要受岩石圈断裂(开原-赤峰断裂带) 控制, 以44°N为界, 南北具有明显差异。北部地震发生的数量少于南部, 震源深度主要集中在4～6 km和8～12 km两个深度范围内; 而南部主要集中在8～12 km和28～30 km两个深度范围内。发震深度分析显示, 开原-赤峰、郯庐断裂带、大兴安岭断裂带下可能存在地温较低的区域, 使地震可以在深部孕育。地震分布的Vp和Vs剖面资料的研究暗示, 断裂与速度变化带、断裂与断裂的相交区域是地震易发生区域。  相似文献   

6.
We present the results of the first airborne LiDAR survey flown in the Koyna-Warna region and examine the relationship between the lineament fabric and the ongoing seismicity in the region. Our studies reveal that earthquakes of M≥4.0 for the period 1968 to 2016 are strongly correlated with a 10 km wide N-S fracture zone, which not only represents the surface expression of seismically active basement faults, but also act as conduits for water percolation between the Koyna and Warna reservoirs. A decreasing trend in the annual distribution of earthquakes was observed from 1985. A new burst of seismic activity in 1993 followed the impoudment of the Warna reservoir. We report a change in annual seismicity pattern, where seismicity peaks during September and December in the pre-Warna period, with a new peak emerging during March-April subsequent to the impoundment of Warna reservoir. A model is proposed to explain the seismicity along dominant N-S lineaments and the impact of Warna reservoir impounding which altered the hydrogeologic regime in the region.  相似文献   

7.
The lithospheric structure of Antarctica has been investigated from P- (PRF) and S- receiver functions (SRF) using the seismological data from Trans-Antarctic Mountain Seismic Experiment (TAMSEIS). For the stations deployed on the thick ice sheet, estimation of crustal parameters from PRF may be erroneous as the Moho conversions may interfere with the reverberations within the thick ice sheet. However, the free surface multiples are well observed in PRF. On the other hand, in SRFs, the primary conversions of interest and multiples are separated by the mother S-phase. Therefore, it is advantageous to interpret PRF and SRF jointly for the regions where we have thick low velocity layer at the top such as ice or sediments. The crustal structure and corresponding parameters have already been estimated by various workers, but here we interpret the PRF and SRF jointly to minimize the ambiguity and map the lithospheric architecture below TAM. Our analysis reveals that the average crustal thickness beneath the east Antarctica craton is ～44 km with Vp/Vs ranging between ～1.7 and 1.9. Below Trans-Antarctic Mountain (TAM), the average crustal thickness is ～36 km with higher Vp/Vs of ～1.8–2.0. The rift and the volcanic affected coastal region show erratic depths and Vp/Vs, primarily due to the absence of either primary conversion or multiples in the receiver functions. A small number of stations far from the volcano show that the crust is thinnest (～26 to 34 km thick) in the coastal part. The contribution of this study is the mapping of the lithospheric configuration, not done so far using SRF. The SRF section along a profile spanning E-, W- Antarctica and TAM reveals that the lithospheric thickness in the coast is ～80 km and below TAM it is ～120 km. In the central thick ice cover region, the lithosphere thickens upto ～150 km towards Vostok highlands. The most intriguing feature in our SRF section is that the crust and lithosphere are shallow below TAM compared to the E- Antarctica. Further, we observe a mid-lithospheric low velocity layer confined mostly below TAM, suggesting that the thermal buoyancy could be the prime cause for the upliftment of TAM.  相似文献   

8.
New empirical relations are derived for source parameters of the Koyna–Warna reservoir-triggered seismic zone in Western India using spectral analysis of 38 local earthquakes in the magnitude range M L 3.5–5.2. The data come from a seismic network operated by the CSIR-National Geophysical Research Institute, India, during March 2005 to April 2012 in this region. The source parameters viz. seismic moment, source radius, corner frequency and stress drop for the various events lie in the range of 1013–1016 Nm, 0.1–0.4 km, 2.9–9.4 Hz and 3–26 MPa, respectively. Linear relationships are obtained among the seismic moment (M 0), local magnitude (M L), moment magnitude (M w), corner frequency (fc) and stress drop (?σ). The stress drops in the Koyna–Warna region are found to increase with magnitude as well as focal depths of earthquakes. Interestingly, accurate depths derived from moment tensor inversion of earthquake waveforms show a strong correlation with the stress drops, seemingly characteristic of the Koyna–Warna region.  相似文献   

9.
M.G. Kopylova  J. Lo  N.I. Christensen 《Lithos》2004,77(1-4):493-510
Modes and compositions of minerals in Slave mantle xenoliths, together with their pressures and temperatures of equilibrium were used to derive model depth profiles of P- and S-wave velocities (Vp, Vs) for composites equivalent to peridotite, pyroxenite and eclogite. The rocks were modeled as isotropic aggregates with uniform distribution of crystal orientations, based on single-crystal elastic moduli and volume fractions of constituent minerals. Calculated seismic wave velocities are adjusted for in situ pressure and temperature conditions using (1) experimental P- and T- derivatives for bulk rocks' Vp and Vs, and (2) calculated P- and T- derivatives for bulk rocks' elastic moduli and densities. The peridotite seismic profiles match well with the globally averaged IASP91 model and with seismic tomography results for the Slave mantle. In peridotite, an observed increase of seismic wave velocities with depth is controlled by lower degrees of chemical depletion in the deeper upper mantle. In eclogite, seismic velocities increase more rapidly with depth than in peridotite. This follows from contrasting first-order pressure derivatives of bulk isotropic moduli for eclogite and peridotite, and from the lower compressibility of eclogite at high pressures. Our calculations suggest that depletion in cratonic mantle has a distinct seismic signature compared to non-cratonic mantle. Depleted mantle on cratons should have slower Vp, faster Vs and should show lower Poisson's ratios due to an orthopyroxene enrichment. For the modelled Slave craton xenoliths, the predicted effect on seismic wave velocities would be up to 0.05 km/s.  相似文献   

10.
To investigate subsurface structure and seismogenic layers, 3D velocity inversion was carried out in the source zone of 1905 Kangra earthquake (M8.0) in the northwestern Himalaya. P-wave and S-wave phase data of 159 earthquakes recorded by a network of 21 stations were used for this purpose. Inverted velocity tomograms up to a depth range of 18 km show significant variations of 14% in Vp and Vs and 6% in the Vp/Vs across the major tectonic zones in the region. Synthesis of seismicity pattern, velocity structure, distinctive focal mechanisms coupled with nature of stress distribution allows mapping of three different source regions that control regional seismotectonics. Accumulating strains are partly consumed by sliding of Chamba Nappe to the southwest through reverse-fault movements along Chamba/Panjal/Main Boundary Thrusts. This coupled with normal-fault type displacements along Chenab Normal Fault in the north account for low magnitude widespread seismicity in upper 8–10 km of the crust. At intermediate depths from 8 to 15 km, adjusting to residual compressive stresses, the detachment or lower end of the MBT slips to produce thrust dominated seismicity. Nucleation of secondary stresses in local NE–SW oriented structure interacts in complex manner with regional stresses to generate normal type earthquakes below the plane of detachment and therefore three seismic regimes at different depths produce intense seismicity in a block of 30 × 30 km2 centered NE to the epicenter of Kangra earthquake.  相似文献   

11.
The Azores archipelago (Portugal) is located on an oceanic plateau, in a geodynamic environment prone to intense seismic and volcanic activity. In order to investigate the crustal structure in this region, we have conducted a local earthquake tomography study in the area of the islands of Faial, Pico and S. Jorge using data recorded in July 1998. The July 9th 1998 earthquake, near Faial Island, triggered an aftershock sequence of thousands of events that lasted for several months and were recorded by a total of 14 stations located on the three islands surrounding the epicentral area. In the upper crustal layers, consistency is seen between the tomographic results and the islands' surface volcanic units. Beneath the Faial central volcano a low Vp (< 6.0 km/s) anomaly roughly located at 3–7 km depth, suggests a connection to the plumbing system, possibly the presence of a magma chamber. In NE Faial, a high Vp (> 6.3 km/s) body was found located at mid-lower crust, most likely an intrusion of gabbroic composition, that is bordered by the registered seismic activity; its shape suggesting a tectonic controlled mechanism. The relocated hypocenters, together with the overall analysis of the Tomographic model, suggest a tectonic segmentation of Faial Island. The crustal thickness under the islands volcanic buildings of the Faial–Pico area was estimated at around 14 km.  相似文献   

12.
We adopted the seismic tomography technique to refine the three-dimensional velocity structure model of the western part of Hokkaido, Japan. Using the P-wave first arrival data listed by Japan Meteorological Agency from 2002 to 2005, we could estimate a 3-D inhomogeneous velocity structure model with a low velocity at a depth of 14 km beneath Asahikawa. The crustal structure near Sapporo was characterized by lateral velocity change toward the southern seaside. The low-velocity zone near Urakawa, proposed by previous research, was also clarified. In general, the present model showed lower-velocity values for most of the crustal layers in the area concerned. The results of this study were affected by less number of higher magnitude events (M?≥?0.5) in the central part of the area of interest. However, the perturbation results for comparatively shallow layers (6–50 km) were good in resolution. It was found that the source region of the Rumoi–Nanbu earthquake of December 14, 2004 was characterized by a low-velocity zone, located between high velocity zones. Such an inhomogeneous crustal structure might play an important role in the relatively high seismic activity in the Rumoi–Nanbu earthquake source region.  相似文献   

13.
Crustal heterogeneity and seismotectonics of the region around Beijing, China   总被引：18，自引：0，他引：18  
Jinli Huang  Dapeng Zhao   《Tectonophysics》2004,385(1-4):159-180
A detailed three-dimensional (3-D) P-wave velocity model of the crust and uppermost mantle under the Chinese capital (Beijing) region is determined with a spatial resolution of 25 km in the horizontal direction and 4–17 km in depth. We used 48,750 precise P-wave arrival times from 2973 events of local crustal earthquakes, controlled seismic explosions and quarry blasts. These events were recorded by a new digital seismic network consisting of 101 seismic stations equipped with high-sensitivity seismometers. The data are analyzed by using a 3-D seismic tomography method. Our tomographic model provides new insights into the geological structure and tectonics of the region, such as the lithological variations and large fault zones across the major geological terranes like the North China Basin, the Taihangshan and the Yanshan mountainous areas. The velocity images of the upper crust reflect well the surface geological and topographic features. In the North China Basin, the depression and uplift areas are imaged as slow and fast velocities, respectively. The Taihangshan and Yanshan mountainous regions are generally imaged as broad high-velocity zones, while the Quaternary intermountain basins show up as small low-velocity anomalies. Velocity changes are visible across some of the large fault zones. Large crustal earthquakes, such as the 1976 Tangshan earthquake (M=7.8) and the 1679 Sanhe earthquake (M=8.0), generally occurred in high-velocity areas in the upper to middle crust. In the lower crust to the uppermost mantle under the source zones of the large earthquakes, however, low-velocity and high-conductivity anomalies exist, which are considered to be associated with fluids. The fluids in the lower crust may cause the weakening of the seismogenic layer in the upper and middle crust and thus contribute to the initiation of the large crustal earthquakes.  相似文献   

14.
Studies of sustained activity in the Koyna — Warna Seismic Zone have yielded several models of faults in the basement of the Deccan Traps inferred from geophysical and seismic signatures. There is however, a dearth of unambiguous surface manifestations of such faults, apart from the surface ruptures from the epicentral zone of the December, 1967 earthquake. We report for the first time, an exposed NW-SE trending reverse fault in the Deccan Trap basalts from this region.  相似文献   

15.
The ratio of P- to S-wave velocities (Vp/Vs) is regarded as one of the most diagnostic properties of natural rocks. It has been used as a discriminant of composition for the continental crust and provides valuable constraints on its formation and evolution processes. Furthermore, the spatial and temporal changes in Vp/Vs before and after earthquakes are probably the most promising avenue to understanding the source mechanics and possibly predicting earthquakes. Here we calibrate the variations in Vp/Vs in dry, anisotropic crustal rocks and provide a set of basic information for the interpretation of future seismic data from the Wenchuan earthquake Fault zone Scientific Drilling (WFSD) project and other surveys. Vp/Vs is a constant (φ0) for an isotropic rock. However, most of crustal rocks are anisotropic due to lattice-preferred orientations of anisotropic minerals (e.g., mica, amphibole, plagioclase and pyroxene) and cracks as well as thin compositional layering. The Vp/Vs ratio of an anisotropic rock measured along a selected pair of propagation-vibration directions is an apparent value (φij) that is significantly different from the value for its isotropic counterpart (φ0). The usefulness of apparent Vp/Vs ratios as a diagnostic of crustal composition depends largely on rock seismic anisotropy. A 5% of P- and S-wave velocity anisotropy is sufficient to make it impossible to determine the crustal composition using the conventional criteria (Vp/Vs<1.756 for felsic rocks, 1.756l.944 fluid-tidied porous/fractured or partially molten rocks) if the information about the wave propagation-polarization directions with respect to the tectonic framework is unknown. However, the variations in Vp/Vs measured from borehole seismic experiments can be readily interpreted according to the orientations of the ray path and the polarization of the shear waves with respect to the present-day principal stress directions (I.e., the orientation of cracks) and the frozen fabric (I.e., foliation and lineation).  相似文献   

16.
M. Faccenda  G. Bressan  L. Burlini   《Tectonophysics》2007,445(3-4):210-226
The compressional and shear wave velocities have been measured at room temperature and pressure up to 450 MPa on 5 sedimentary rock samples, representative of the most common lithologies of the upper crust in the central Friuli area (northeastern Italy). At 400 MPa confining pressure the Triassic dolomitic rock shows the highest velocities (Vp  7 km/s, Vs  3.6 km/s), the Jurassic and Triassic limestones samples intermediate velocities (Vp  6.3 /s, Vs  3.5 km/s) and the Cenozoic and Paleozoic sandstones the lowest velocities (Vp  6.15 km/s, Vs  3.35 km/s). The Paleozoic sandstone sample is characterized by the strongest anisotropy (10%) and significant birefringence (0.2 km/s) is found only on the Cenozoic sandstone sample. We elaborated the synthetic profiles of seismic velocities, density, elastic parameters and reflection coefficient, related to 4 one-dimensional geological models extended up to 22 km depth. The synthetic profiles evidence high rheological contrasts between Triassic dolomitic rocks and the soft sandstones and the Jurassic limestones. The Vp profiles obtained from laboratory measurements match very well the in-situ Vp profile measured by sonic log for the limestones and dolomitic rocks, supporting our one-dimensional modelling of the calcareous-carbonatic stratigraphic series. The Vp and Vs values of the synthetic profiles are compared with the corresponding ones obtained from the 3-D tomographic inversion of local earthquakes. The laboratory Vp are generally higher than the tomographic ones with major discrepancies for the dolomitic lithology. The comparison with the depth location of seismicity reveals that the seismic energy is mainly released in correspondence of high-contrast rheological boundaries.  相似文献   

17.
为了更好地研究吉林前郭地区的地震活动性,本文利用2013年10月至2015年2月吉林前郭5.8级震群周围17个地震台站记录到的405个地震事件资料,共获得2 218条P波走时数据和2 166条S波走时数据,采用地震双差层析成像技术,获取吉林前郭震区上地壳三维P波、S波速度精细结构。结果显示,震区上地壳速度分层明显,P波速度变化范围为5.8~7.2km/s,S波速度变化范围为3.4~4.0km/s,波速比(vP/vS)变化较小。震区有低速带穿过,低速带走向为北东向,倾角较大(近直立),纵向延伸至15km深度;震群主要位于低P波和S波速度区,对应较低的波速比。吉林前郭震区构造强度较低,受西太平洋板块俯冲产生应力场的影响,易于发生地震。  相似文献   

18.
Seismogenesis of aftershocks occurring in the Kachchh seismic zone for more than last 10?years is investigated through modeling of fractal dimensions, b-value, seismic velocities, stress inversion, and Coulomb failure stresses, using aftershock data of the 2001 Bhuj earthquake. Three-dimensional mapping of b-values, fractal dimensions, and seismic velocities clearly delineate an area of high b-, D-, and Vp/Vs ratio values at 15?C35?km depth below the main rupture zone (MRZ) of the 2001 mainshock, which is attributed to higher material heterogeneities in the vicinity of the MRZ or deep fluid enrichment due to the release of aqueous fluid/volatile CO2 from the eclogitisation of the olivine-rich lower crustal rocks. We notice that several aftershocks are occurred near the contacts between high (mafic brittle rocks) and low velocity regions while many of the aftershocks including the 2001 Bhuj mainshock are occurred in the zones of low velocity (low dVp, low dVs and large Vp/Vs) in the 15?C35?km depth range, which are inferred to be the fractured rock matrixes filled with aqueous fluid or volatiles containing CO2. Further support for this model comes from the presence of hydrous eclogitic layer at sub-lithospheric depths (34?C42?km). The depth-wise stress inversions using the P- and T-axes data of the focal mechanisms reveal an increase in heterogeneity (i.e., misfit) with an almost N?CS ??1 orientation up to 30?km depth. Then, the misfit decreases to a minimum value in the 30?C40?km depth range, where a 60o rotation in the ??1 orientation is also noticed that can be explained in terms of the fluid enrichment in that particular layer. The modeling of Coulomb failure stress changes (??CFS) considering three tectonic faults [i.e., NWF, GF, and Allah bund fault (ABF)] and the slip distribution of the 2001 mainshock on NWF could successfully explain the occurrences of moderate size events (during 2006?C2008) in terms of increase in positive ??CFS on GF and ABF. In a nutshell, we propose that the fluid-filled mafic intrusives are acting as stress accentuators below the Kachchh seismic zone, which generate crustal earthquakes while the uninterrupted occurrence of aftershocks is triggered by stress transfer and aqueous fluid or volatile CO2 flow mechanisms. Further, our results on the 3-D crustal seismic velocity structure, focal mechanisms, and b-value mapping will form key inputs for understanding wave propagation and earthquake hazard-related risk associated with the Kachchh basin.  相似文献   

19.
华南地壳及上地幔三维速度结构成像   总被引：2，自引：0，他引：2  
利用国家地震科学数据共享中心的地震目录及临时台网资料,挑选出11 113个区域地震的77 093条P波走时和93 541条S波走时,采用1°×1°的经纬度网格划分,反演获得了深至60km的华南南部地区的地壳及上地幔三维P波和S波的速度结构。研究结果表明,纵波速度结构与横波速度结构从整体来看具有较好的一致性,说明该研究获得的深部速度结果具有较高的可信性,但是在50km的深度纵、横波速度结构的一致性较差,可能是由于该深度的纵横波走时数据存在着较大的差异所导致的。本研究显示了研究区域内的速度结构存在着明显的横向不均匀性,东南沿海地区的地壳中出现了大规模的低速异常,可能与该区地幔物质的上涌有关;而在珠江三角洲、雷州半岛、北部湾及海南岛等地区莫霍面下方出现的低速异常,则与该区的热运动有关。经分析认为,华南南部地壳及上地幔的速度不均匀性和华南板块与扬子地块的相互作用有关,因此开展进一步研究能为探索和分析华南再造以及中国南海北部的构造演化提供重要信息。  相似文献   

20.
Spectral analysis of digital data of the Bouguer anomaly map of NW India suggests maximum depth of causative sources as 134 km that represents the regional field and coincides with the upwarped lithosphere — asthenosphere boundary as inferred from seismic tomography. This upwarping of the Indian plate in this section is related to the lithospheric flexure due to its down thrusting along the Himalayan front. The other causative layers are located at depths of 33, 17, and 6 km indicating depth to the sources along the Moho, lower crust and the basement under Ganga foredeep, the former two also appear to be upwarped as crustal bulge with respect to their depths in adjoining sections. The gravity and the geoid anomaly maps of the NW India provide two specific trends, NW-SE and NE-SW oriented highs due to the lithospheric flexure along the NW Himalayan fold belt in the north and the Western fold belt (Kirthar -Sulaiman ranges, Pakistan) and the Aravalli Delhi Fold Belt (ADFB) in the west, respectively. The lithospheric flexures also manifest them self as crustal bulge and shallow basement ridges such as Delhi — Lahore — Sagodha ridge and Jaisalmer — Ganganagar ridge. There are other NE-SW oriented gravity and geoid highs that may be related to thermal events such as plumes that affected this region. The ADFB and its margin faults extend through Ganga basin and intersect the NW Himalayan front in the Nahan salient and the Dehradun reentrant that are more seismogenic. Similarly, the extension of NE-SW oriented gravity highs associated with Jaisalmer — Ganganagar flexure and ridge towards the Himalayan front meets the gravity highs of the Kangra reentrant that is also seismogenic and experienced a 7.8 magnitude earthquake in 1905. Even parts of the lithospheric flexure and related basement ridge of Delhi — Lahore — Sargodha show more seismic activity in its western part and around Delhi as compared to other parts. The geoid highs over the Jaisalmer — Ganganagar ridge passes through Kachchh rift and connects it to plate boundaries towards the SW (Murray ridge) and NW (Kirthar range) that makes the Kachchh as a part of a diffused plate boundary, which, is one of the most seismogenic regions with large scale mafic intrusive that is supported from 3-D seismic tomography. The modeling of regional gravity field along a profile, Ganganagar — Chandigarh extended beyond the Main Central Thrust (MCT) constrained from the various seismic studies across different parts of the Himalaya suggests crustal thickening from 35-36 km under plains up to ～56 km under the MCT for a density of 3.1 g/cm3 and 3.25 g/cm3 of the lower most crust and the upper mantle, respectively. An upwarping of ～3 km in the Moho, crust and basement south of the Himalayan frontal thrusts is noticed due to the lithospheric flexure. High density for the lower most crust indicates partial eclogitization that releases copious fluid that may cause reduction of density in the upper mantle due to sepentinization (3.25 g/cm3). It has also been reported from some other sections of Himalaya. Modeling of the residual gravity and magnetic fields along the same profile suggest gravity highs and lows of NW India to be caused by basement ridges and depressions, respectively. Basement also shows high susceptibility indicating their association with mafic rocks. High density and high magnetization rocks in the basement north of Chandigarh may represent part of the ADFB extending to the Himalayan front primarily in the Nahan salient. The Nahan salient shows a basement uplift of ～ 2 km that appears to have diverted courses of major rivers on either sides of it. The shallow crustal model has also delineated major Himalayan thrusts that merge subsurface into the Main Himalayan Thrust (MHT), which, is a decollment plane.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号