共查询到20条相似文献，搜索用时 15 毫秒
1.
The use of ballastless slab track is significantly increasing in HST line technology. This development is due to some structural and operational advantages over ballasted track. In addition, floating slab tracks can be used to control ground-borne vibrations generated by surface and underground rail transportation systems. In this paper, a general and fully three dimensional multi-body-finite element-boundary element model is used to study vibrations due to train passage on ballast and non-ballast tracks. The vehicle is modelled as a multi-body system, the track, in both cases, using finite elements and the soil is represented using boundary elements. The three components of the load are considered; the quasi-static excitation (force generated by moving axle loads), the parametric excitation due to discrete supports of the rails and the excitation due to wheel and rail roughness and track unevenness. Track receptances are computed for both track systems and vibrations induced by high-speed train passage at the track and the free-field are evaluated for different train speeds. Soil behaviour changes significantly with the track system. Finally, a floating slab track is studied to show how this type of solution leads to a significant vibration reduction for surface tracks. 相似文献
2.
This paper has two main purposes. One is to present and analyse soil and structural vibration data obtained experimentally during certification testing of the high-speed train line between Córdoba and Málaga (Spain) that was opened on December 2007. The second is to show the capabilities of a three-dimensional boundary element method (BEM)/finite element method (FEM) numerical approach for the analysis of train induced vibrations. The model can represent local soil conditions, discontinuities such as underpasses, as well as structures placed next to the rail track. Vibrations in those structures can be computed taking into account, in a rigorous way, dynamic soil–structure interaction and local soil properties. Experimental and numerical results at several points near the track are compared. Results for an overhead contact support structure are also evaluated. The comparison of numerically predicted and recorded results shows that the model is reliable for predicting the amplitude of vibrations produced in the soil and nearby structures by high-speed trains. 相似文献
3.
A three dimensional numerical model is presented capable of modelling the propagation and transmission of ground vibration in the vicinity of high speed railways. It is used to investigate the effect of embankment constituent material on ground borne vibration levels at various distances from the track.The model is a time domain explicit, dynamic finite element model capable of simulating non-linear excitation mechanisms. The entire model, including the wheel/rail interface is fully coupled. To account for the unbounded nature of the soil structure an absorbing boundary condition (infinite element) is placed at the truncated interfaces. To increase boundary absorption performance, the soil structure is modelled using an elongated spherical geometry.The complex geometries associated with the track components are modelled in detail thus allowing a highly realistic simulation of force transmission from vehicle to embankment. Lastly, quasi-static and dynamic excitation mechanisms of the vehicle locomotives are described using a multi-body approach which is fully coupled to the track using non-linear Hertzian contact theory.The resulting model is verified using experimental ground borne vibration data from high speed trains, gathered through field trials. It is then used to investigate the role of embankments in the transmission of vibration. It is found that soft embankments exhibit large deflections and act as a waveguide for railway vibrations which are trapped within the structure. This results in increased vibration levels both inside the embankment and in the surrounding soil. In contrast it is found that embankments formed from stiffer material reduce vibrations in the near and far fields. 相似文献
4.
Recent advances in railway-induced ground vibrations showed that the track/soil interaction plays an important role in the low frequency range. This paper contributes to the numerical analysis of train/track/foundation dynamics by presenting the accuracy of a coupled lumped mass (CLM) model devoted to the railway foundations and to the track/soil coupling. Following a summary of the background and the advantages of the CLM model, the coupling strategy is quantified through two application cases. Firstly, the dynamic track deflection is calculated for different railway lines considering various degrees of complexities of foundations. Then, the foundation responses are compared depending on whether detailed coupling is introduced or not. The benefit of the proposed model is emphasized by presenting free-field ground vibration responses generated by a tram and a high-speed train, obtained by a revisited two-step prediction model developed by the authors. 相似文献
5.
基于轨道结构-路基-地基动力相互作用理论,建立考虑地震-列车移动荷载耦合输入的轨道结构-路基-地基动力学模型,研究高速铁路路基及轨道在耦合荷载作用下的振动响应问题。通过编制DLOAD子程序并与ABAQUS有限元计算程序联立,实现地震荷载与列车移动荷载耦合作用的施加,以高速铁路桩承式路基及自由式路基为研究对象,对地震-列车移动荷载耦合作用下两种路基系统的动力响应进行数值计算并比较两者的振动响应差异。结果表明,耦合荷载对桩承式路基动力响应影响显著,该荷载作用下桩承式路基会发生共振现象,使得桩承式路基中轨道和路基振动位移幅值均大于自由式路基的振动位移幅值;桩承式路基不会影响路基系统的振动频率,但会改变路基系统的振动大小,桩承式路基中轨道X方向加速度、路肩边及路基坡脚处的竖向加速度分别减小6.2%、50%、28.6%。 相似文献
6.
Pedro Alves Costa Rui Calçada António Silva Cardoso Anders Bodare 《Soil Dynamics and Earthquake Engineering》2010
The main objectives of this paper are the evaluation of the relevance of the non-linear behaviour of the soil on the track response and the validation of a methodology, which includes these effects through an equivalent linear analysis. The proposed numerical model is based on 2.5D finite/infinite elements method, coupled with an iterative procedure in order to obtain an agreement between the strain levels and the dynamic properties of the materials. In order to validate the model, the case study of Ledsgard was simulated, and the experimental and numerical results of displacements of the track were compared, considering several circulation speeds for the X2000 train. From the results, it is possible to recognize that the stiffness degradation, function of the strain level, plays a relevant role for the case of high-speed railway lines on soft ground. Moreover, the simulations developed with the proposed methodology provided similar results to those observed, independently of the train speed, contrary to what was obtained when the elastic linear model was used. 相似文献
7.
Model testing in laboratory, as an effective alternative to field measurement, provides valuable data to understand railway׳s dynamic behaviors under train moving loads. This paper presents comprehensive experimental results on track vibration and soil response of a ballastless high-speed railway from a full-scale model testing with simulated train moving loads at various speeds. A portion of a realistic ballastless railway comprising slab track, roadbed, subgrade, and subsoil was constructed in a larger steel box. A computer-controlled sequential loading system was developed to generate equivalent vertical loadings at the track structure for simulating the dynamic excitations due to train׳s movements. Comparisons with the field measurements show that the proposed model testing can accurately reproduce dynamic behaviors of the track structure and underlying soils under train moving loads. The attenuation characteristics of dynamic soil stresses in a ballastless slab track is found to have distinct differences from that in a ballasted track. The model testing results provide better understanding of the influence of dynamic soil–structure interaction and train speed on the response of track structure and soils. 相似文献
8.
地震激励对高速车辆-简支箱梁桥系统动力响应的影响关系到高速铁路运营安全。基于车辆-轨道耦合动力学和列车-轨道-桥梁动力相互作用理论,运用有限元和多体动力学方法,建立高速铁路桥梁区段车辆-轨道-桥梁耦合系统动力学模型,分析在人工地震波作用下高速铁路车-线-桥耦合系统动力响应。结果表明:地震激励对轨道板、支撑层和桥梁的横向振动特性的影响大于对垂向振动特性的影响,桥梁结构对地震激励的敏感程度大于轨道结构;车辆运行速度对系统垂向振动特性的影响大于对横向振动特性的影响。研究结论可为地震荷载作用下高速铁路安全运营提供理论依据。 相似文献
9.
The development of analysis on train-induced ground vibration is briefly summarized. A train-track-ground integrated dynamic
model is introduced in the paper to predict the ground vibration induced by high-speed trains. Representative dynamic responses
of the train-track-ground system predicted by the model are presented. Some major results measured from two field tests on
the ground vibration induced by two high-speed trains are reported. Numerical prediction with the proposed train-track-ground
model is validated by the high-speed train running experiments. Research results show that the wheel/rail dynamic interaction
caused by track irregularities has a significant influence on the ground acceleration and little influence on the ground displacement.
The main frequencies of the ground vibration induced by high-speed trains are usually below 80 Hz. Compared with the ballasted
track, the ballastless track structure can produce much larger train-induced ground vibration at frequencies above 40 Hz.
The vertical ground vibration is much larger than the lateral and longitudinal components. 相似文献
10.
在研究轨道振动荷载的产生机理基础上,归纳出一个能够涵盖速度、线路不平顺、轮重、轨枕对轮载的分散作用等因素在内的轨道荷载解析表达式,以此作为输入施加到土体模型上,利用ANSYS模拟地基土在轨道移动荷载作用下的三维瞬态弹塑性反应。通过计算得到土体不同位置位移和加速度时程曲线,并得出如下结论:荷载刚施加时地面位移会有一个突变,但是随着荷载的移动会达到一个稳定值,并随着水平面内远离轨道,该值逐渐衰减;荷载刚刚施加时加速度会有一个突变值,随着荷载的移动逐渐趋于零。轨道机车速度对竖向方向的位移和加速度影响不大。 相似文献
11.
A field measurement of ground vibration was performed on the Beijing−Shanghai high-speed railway in China. In this paper, the experimental results of vertical ground vibration accelerations induced by very high speed trains running over a non-ballasted track on embankment with speeds from 300 to 410 km/h are reported and analyzed in detail for the first time. Characteristics of ground vibration accelerations in both time and frequency domains are analyzed based on the test data. It is shown that the periodic exciting action of high-speed train bogies can be identified in time histories of vertical accelerations of the ground within the range of 50 m from the track centerline. The first dominant sensitive frequency of the ground vibration acceleration results from the wheelbase of the bogie, and the center distance of two neighboring cars plays an important role in the significant frequencies of the ground vibration acceleration. Variations of time–response peak value and frequency-weighted vertical acceleration level of ground vibration in relation with train speed as well as the distance from the track centerline are also investigated. Results show that the time-domain peak value of ground vibration acceleration exhibits an approximately linear upward tendency with the increase of train speed. With the increasing distance from the track centerline, the frequency-weighted vertical acceleration level of the ground vibration attenuates more slowly than the time-domain peak value of the ground vibration acceleration does. Severe impact of high-speed railway ground vibration on human body comfort on the ground occurs at the speed of 380–400 km/h. The results given in the paper are also valuable for validating the numerical prediction of train induced ground vibrations. 相似文献
12.
This paper outlines a vibration prediction tool, ScopeRail, capable of predicting in-door noise and vibration, within structures in close proximity to high speed railway lines. The tool is designed to rapidly predict vibration levels over large track distances, while using historical soil information to increase accuracy. Model results are compared to an alternative, commonly used, scoping model and it is found that ScopeRail offers higher accuracy predictions. This increased accuracy can potentially reduce the cost of vibration environmental impact assessments for new high speed rail lines.To develop the tool, a three-dimensional finite element model is first outlined capable of simulating vibration generation and propagation from high speed rail lines. A vast array of model permutations are computed to assess the effect of each input parameter on absolute ground vibration levels. These relations are analysed using a machine learning approach, resulting in a model that can instantly predict ground vibration levels in the presence of different train speeds and soil profiles. Then a collection of empirical factors are coupled with the model to allow for the prediction of structural vibration and in-door noise in buildings located near high speed lines. Additional factors are also used to enable the prediction of vibrations in the presence of abatement measures (e.g. ballast mats and floating slab tracks) and additional excitation mechanisms (e.g. wheelflats and switches/crossings). 相似文献
13.
Reduction of ground vibration by means of barriers or soil improvement along a railway track 总被引：3，自引：0，他引：3
Trains running in built-up areas are a source to ground-borne noise. A careful design of the track may be one way of minimizing the vibrations in the surroundings. For example, open or infilled trenches may be constructed along the track, or the soil underneath the track may be improved. In this work, the influence of the track design and properties on the level of ground vibration due to a vehicle moving with subsonic speed is examined. A coupled finite element-boundary element model of the track and subsoil is employed, adopting a formulation in the moving frame of reference following the vehicle. The computations are carried out in the frequency domain for various combinations of the vehicle speed and the excitation frequency. The analyses indicate that open trenches are more efficient than infilled trenches or soil stiffening–even at low frequencies. However, the direction of the load is of paramount importance. For example, the response outside a shallow open trench may change dramatically when horizontal load is applied instead of vertical load. 相似文献
14.
Finite element analyses were used to investigate the behavior of the building vibration induced by high-speed trains moving on bridges. The model includes the bridge, nearby building, soil and train. Finite element results indicate that trainload frequencies are more important than the natural frequencies of bridges and trains for building vibrations. If the building natural frequencies approach to the trainload frequencies, which equal an integer times the train speed over the compartment length, the resonance occurs and the building vibration will be large. Moreover, the vibration shape is similar to the mode shape of the resonance building frequency. To isolate the building vibration induced by moving trains, this paper investigates three common types of foundations, which include the extension of retaining walls, pile foundation and soil improvement around the building. Soil improvement around the building is the best way to reduce the building vibration both in horizontal and vertical directions. 相似文献
15.
为探究高速铁路两侧隔振屏障隔振效果，采用有限元与无限元边界结合的方式进行分析，研究不同连续型隔振屏障及布置形式对隔振效果的影响。通过现场试验与同尺寸、同属性有限元模型对比试验，验证有限元模型合理性。计算结果表明:不同连续型隔振屏障中，空沟隔振效果最优，空沟隔振措施适合高速列车隔振；隔振屏障宽度为0.6～2.5倍波长时，其对隔振效果的影响较小，随着宽度的改变，隔振效果变化幅度较小；隔振屏障深度为3.8～15.2倍波长时，其对隔振效果的影响较明显，随着深度的增加，隔振效果增强；屏障位置对隔振效果的影响较大，建议屏障应靠近路基布置；连续型隔振屏障对高频的隔振效果优于低频。 相似文献
16.
The boundary element method has been successfully applied in the past to the analysis of hydrodynamic forces in two-dimensional infinite as well as two- and three-dimensional finite reservoirs subjected to seismic ground motions. This paper presents the results of more recent research on the application of the constant boundary element method to the 3D analysis of reservoir vibration. Special boundary conditions, previously used in the 2D case, to treat infinite radiation damping and damping from foundation soil and banks have been incorporated in this formulation. Numerical results for vibration of a 3D infinite rectangular reservoir as well as of a 3D infinite reservoir impounded by an arch dam are presented and compared with some existing results obtained by other researchers. 相似文献
17.
This paper presents a procedure to develop scalable reduced models for the through-the soil interaction and traveling wave effects of distant sleepers in a long railway track. For development purposes, and, without loss of generality, the geometry of the sleepers is consistent with the UIC-60 track system commonly used in European high speed rail and the vertical vibration mode is considered. The ballast and the effects of soil layering are not considered in the present paper; however, it is the subject of ongoing research. The proposed reduced models are based on B-Spline impulse response functions (BIRF) of the sleepers only as computed through boundary element method (BEM) solutions of the full model, preserve the frequency content of the full models, and they are highly accurate within the assumptions of linear isotropic and homogeneous soil media. They are expressed in a scalable form with respect to soil properties and sleeper spacing. In particular, the BIRFs of distant sleepers can be accurately approximated by appropriate scaling operations of time and amplitude of a reference sleeper BIRF while retaining all dynamic characteristics of the full model. Three main scaling parameters are proposed: (i) the apparent propagation velocity, (ii) the geometric damping coefficient, and (iii) the soil properties of a reference soil (i.e., the shear modulus and shear wave velocity). The models are validated through comparisons with other BEM solutions, and the accuracy and efficiency are established. The proposed models are developed as part of an NSF funded research on vibrations induced by high-speed rail traffic and are consistent with the associated train and rail models and a multi-system interface coupling (MSIC) technique that were developed as a part of the project and presented in companion papers. The proposed procedure forms the framework for developing scaled reduced models for other vibration modes and different sleeper geometries and can be generalized to include any foundation type or layered soil profiles. 相似文献
18.
车辆-轨道系统振动响应分析--Timoshenko梁与Euler梁轨道模型的比较 总被引：1，自引：0，他引：1
近年来，铁路的高速化、高运量化以及轻微的地震灾害等因素加速了轨道结构的沉降或变形，导致车辆轨道系统振动的加剧。本文运用车辆-轨道耦合动力学理论，编制了基于Timoehenko梁钢轨模型的车辆-轨道耦合振动仿真分析软件，分析了车辆-轨道系统的垂向振动特性，并与基于Euler梁模型的VICT软件的仿真结果进行了比较分析。结果表明：仿真结果与VICT的仿真结果基本一致，但在较高频域，前者能更好地反映轮轨系统的高频特性。因而，在研究轮轨高频振动及轮轨噪声时。采用Timoshenko梁钢轨模型更具合理性。 相似文献
19.
利用有限单元法,基于力学原理和几何协调条件,导出了非对称箱型截面梁单元的弯扭耦合刚度矩阵,建立了斜拉桥在车辆荷载作用下的横向动力分析模型。由于考虑了箱梁的约束扭转,该模型能够分析复线或多线铁路桥在偏载作用下的横向振动问题。以桥梁轨道随机不平顺作为激振源,进行了机车过桥的实例分析。计算结果表明,桥梁的车激横向动力响应随车速及轨道不平顺样本的不同而变化,并随桥跨的增加而快速变得显著,车辆偏载对箱梁扭转振动有显著影响,所建立的力学模型是斜拉桥车桥耦合振动分析的实用模型。 相似文献
20.
Piled embankments, which offer many advantages, are increasingly popular in construction of high-speed railways in China. Although the performance of piled embankment under static loading is well-known, the behavior under the dynamic train load of a high-speed railway is not yet understood. In light of this, a heavily instrumented piled embankment model was set up, and a model test was carried out, in which a servo-hydraulic actuator outputting M-shaped waves was adopted to simulate the process of a running train. Earth pressure, settlement, strain in the geogrid and pile and excess pore water pressure were measured. The results show that the soil arching height under the dynamic train load of a high-speed railway is shorter than under static loading. The growth trend for accumulated settlement slowed down after long-term vibration although there was still a tendency for it to increase. Accumulated geogrid strain has an increasing tendency after long-term vibration. The closer the embankment edge, the greater the geogrid strain over the subsoil. Strains in the pile were smaller under dynamic train loads, and their distribution was different from that under static loading. At the same elevation, excess pore water pressure under the track slab was greater than that under the embankment shoulder. 相似文献