共查询到20条相似文献，搜索用时 31 毫秒
1.
The liquefaction behavior and cyclic resistance ratio (CRR) of reconstituted samples of non-plastic silt and sandy silts with 50% and 75% silt content are examined using constant-volume cyclic and monotonic ring shear tests along with bender element shear wave velocity (Vs) measurements. Liquefaction occurred at excess pore water pressure ratios (ru) between 0.6 and 0.7 associated with cumulative cyclic shear strains (γ) of 4% to 7%, after which cyclic liquefaction ensued with very large shear strains and excess pore water pressure ratio (ru>0.8). The cyclic ring shear tests demonstrate that cyclic resistance ratio of silt and sandy silts decreases with increasing void ratio, or with decreasing silt content at a certain void ratio. The results also show good agreement with those from cyclic direct simple shear tests on silts and sandy silts. A unique correlation is developed for estimating CRR of silts and sandy silts (with more than 50% silt content) from stress-normalized shear wave velocity measurements (Vs1) with negligible effect of silt content. The results indicate that the existing CRR–Vs1 correlations would underestimate the liquefaction resistance of silts and sandy silt soils. 相似文献
2.
Accurate prediction of the liquefaction of saturated soils is based on strong coupling between the pore fluid phase and soil skeleton. A practical numerical method for large strain dynamic analysis of saturated soils is presented. The u–p formulation is used for the governing equations that describe the coupled problem in terms of soil skeleton displacement and excess pore pressure. A mixed finite element and finite difference scheme related to large strain analysis of saturated soils based on the updated Lagrangian method is given. The equilibrium equation of fluid-saturated soils is spatially discretized by the finite element method, whereas terms associated with excess pore pressure in the continuity equation are spatially discretized by the finite difference method. An effective cyclic elasto-plastic constitutive model is adopted to simulate the non-linear behavior of saturated soils under dynamic loading. Several numerical examples that include a saturated soil column and caisson-type quay wall are presented to verify the accuracy of the method and its usefulness and applicability to solutions of large strain liquefaction analysis of saturated soils in practical problems. 相似文献
3.
Semi-empirical procedures for evaluating the liquefaction potential of saturated cohesionless soils during earthquakes are re-examined and revised relations for use in practice are recommended. The stress reduction factor (rd), earthquake magnitude scaling factor for cyclic stress ratios (MSF), overburden correction factor for cyclic stress ratios (Kσ), and the overburden normalization factor for penetration resistances (CN) are discussed and recently modified relations are presented. These modified relations are used in re-evaluations of the SPT and CPT case history databases. Based on these re-evaluations, revised SPT- and CPT-based liquefaction correlations are recommended for use in practice. In addition, shear wave velocity based procedures are briefly discussed. 相似文献
4.
Cyclic softening and strength loss of saturated clays during earthquakes is often an important consideration in engineering problems such as slope stability, dam/levee safety, and foundation bearing capacity. This study proposes a simplified procedure for evaluating cyclic softening (amount of strength loss) that may be expected in saturated clays during earthquakes and illustrates how to implement it in engineering analysis. The procedure has two main steps: (1) estimation of an equivalent cyclic shear strain amplitude and associated number of cycles induced in the soil mass by an earthquake; and (2) estimation of softening and strength loss in the soil mass. A key aspect of the proposed procedure is adoption of a strain-based approach to estimate cyclic softening as opposed to the widely used stress-based approach of liquefaction assessments. A threshold strain concept originating from the strain-based approach is first discussed and the development of a procedure is presented subsequently. The proposed procedure provides reasonable, first-order estimates of cyclic softening consistent with the other developed procedures. In addition, the capability of the procedure is demonstrated with two case histories identified as involving cyclic softening of clays. 相似文献
5.
The liquefaction susceptibility of granular soils under seismic actions is commonly estimated by means of the liquefaction safety factor and recently by the potential index also. Since its original formulation the potential index has been developed and modified according to both deterministic and probabilistic approaches in order to draw liquefaction microzonation maps. In this study a new approach to potential index definition is proposed in order to relate the liquefaction potential prediction to the loss of bearing capacity for shallow foundation. Such new method has been used to estimate the so called liquefaction damage potential PDL at Barletta site, located in Puglia Region, where strong seismic events may occur. 相似文献
6.
目前,主要依靠室内动力试验对黄土液化势进行评价。由于黄土特殊的结构性,室内试验对其饱和的过程较为复杂,且与实际场地饱和黄土差异明显,导致室内黄土液化试验结果并不能代表现场饱和黄土的抗液化强度。本文选取兰州市西固区寺儿沟村某饱和黄土场地进行钻孔测试,现场实施了标准贯入试验、静力触探试验以及剪切波速测试。应用Robertson的土类指数分类图对该场地不同含水率黄土的土类进行了界定,确定了饱和黄土属于类砂土,有液化势。应用NCEER推荐方法,计算了3组原位试验数据的饱和黄土循环抗力比（CRR）,通过与1976年唐山地震和1999年集集地震液化土CRR对比,得出了饱和黄土抗液化强度很低的结论。 相似文献
7.
Softening and strength loss of sands with increasing excess pore water pressure under repeated loads is well-known. However, extensive damage to the built environment also occurs at the sites underlain by fine grained soils during seismic shaking. The primary objective of this study is to investigate the factors affecting cyclic behavior of saturated low-plastic silt through laboratory testing. For this purpose, an extensive laboratory testing program including conventional monotonic and cyclic triaxial tests was carried out over reconstituted silt samples. The effects of the inherent soil properties and the effects of loading characteristics on the cyclic response of saturated low-plastic reconstituted silt samples were examined separately. Based on the test results, a model was introduced to estimate the effect of initial shear stress on the cyclic response. Besides, liquefaction susceptibility of the samples was examined via current liquefaction susceptibility criteria. 相似文献
8.
The November 3, 2002 Denali-Alaska earthquake (Mw=7.9) caused significant liquefaction associated damage to various infrastructure built on fine-grained soils. The seismic response, liquefaction potential, and excess pore pressure generation of soils in cold regions, especially those of fine-grained nature, have not been studied thoroughly and therefore are not well-understood. This paper presents results from an extensive laboratory study on the characteristics of excess pore pressure generation and liquefaction potential of fine-grained soils. Laboratory-constituted soils specimens were tested in four categories: (1) tests on specimens subjected to no thermal conditioning or freeze–thaw cycles; (2) tests on specimens conditioned at 24, 5, 1, 0.5, and −0.2 °C; (3) tests on specimens subjected to 1–4 freeze–thaw cycles; and (4) tests on specimens conditioned at near-freezing temperatures of 0.5 and −0.2 °C through different freeze–thaw paths. Strain-controlled, undrained, cyclic triaxial tests were performed at shear strain levels of 0.005–0.8%. Specimens conditioned at different temperatures were found to generate significantly different pore pressures with cyclic loading. The excess pore pressure generation at near or slightly below freezing was found to change dramatically. A transitional change in the dynamic soil behavior, attributed to unfrozen- or frozen-dominant pore water, was discovered. The threshold shear strain was also found to be influenced by the temperature. Subjecting the soil specimens to 1, 2 and 4 freeze–thaw cycles caused a reduction in excess pore pressure generation and slight change in the threshold shear strain. The temperature conditioning path to reach the target temperature was found to be important on the development of excess pore pressure at near and slightly below-freezing temperatures. 相似文献
9.
遮帘式板桩码头作为一种新型的板桩结构型式,其抗震性能研究是设计建造过程中的重要环节。在FEM-FDM水土耦合计算的平台上引入循环弹塑性本构模型,借助FORTRAN编程软件形成饱和砂土动力液化分析的数值方法,可有效模拟饱和砂土在地震动力作用下的非线性及大变形特性,同时也可模拟砂土液化流动对遮帘桩和前墙的动土压力。研究表明:地震作用下可液化土层超孔隙水压力比增长并发生较大的水平流动变形,对前墙的水平破坏大于竖向破坏;前墙剪力最大值位于海床与前墙交界处;遮帘桩剪力最大值位移与前墙底平行的位置;后拉杆拉力逐渐变大,前拉杆拉力逐渐变小。通过对板桩码头地震液化灾害的分析,可为抗震和抗液化设计提供参考依据。 相似文献
10.
The problem of liquefaction of soil during seismic event is one of the important topics in the field of Geotechnical Earthquake Engineering. Liquefaction of soil is generally occurs in loose cohesionless saturated soil when pore water pressure increases suddenly due to induced ground motion and shear strength of soil decreases to zero and leading the structure situated above to undergo a large settlement, or failure. The failures took place due to liquefaction induced soil movement spread over few square km area continuously. Hence this is a problem where spatial variation involves and to represent this spatial variation Geographic Information System (GIS) is very useful in decision making about the area subjected to liquefaction. In this paper, GIS software GRAM++ is used to prepare soil liquefaction susceptibility map for entire Mumbai city in India by marking three zones viz. critically liquefiable soil, moderately liquefiable soil and non liquefiable soil. Extensive field borehole test data for groundwater depth, standard penetration test (SPT) blow counts, dry density, wet density and specific gravity, etc. have been collected from different parts of Mumbai. Simplified procedure of Youd et al. (2001) is used for calculation of factor of safety against soil liquefaction potential. Mumbai city and suburban area are formed by reclaiming lands around seven islands since 1865 till current date and still it is progressing in the area such as Navi Mumbai and beyond Borivali to Mira road suburban area. The factors of safety against soil liquefaction were determined for earthquake moment magnitude ranging from Mw = 5.0 to 7.5. It is found that the areas like Borivali, Malad, Dahisar, Bhandup may prone to liquefaction for earthquake moment magnitude ranging from Mw = 5.0 to 7.5. The liquefaction susceptibility maps were created by using GRAM++ by showing the areas where the factor of safety against the soil liquefaction is less than one. Proposed liquefaction susceptibility map of Mumbai city can be used by researchers for earthquake hazard analysis, for the preventive measures in disaster management, for urban planning and further development of Mumbai city and suburban area. 相似文献
11.
Mahdi Taiebat Boris Jeremić Yannis F. Dafalias Amir M. Kaynia Zhao Cheng 《Soil Dynamics and Earthquake Engineering》2010
To predict the earthquake response of saturated porous media it is essential to correctly simulate the generation, redistribution, and dissipation of excess pore water pressure during and after earthquake shaking. To this end, a reliable numerical tool requires a dynamic, fully coupled formulation for solid–fluid interaction and a versatile constitutive model. Presented in this paper is a 3D finite element framework that has been developed and utilized for this purpose. The framework employs fully coupled dynamic field equations with a u–p–U formulation for simulation of pore fluid and solid skeleton interaction and a SANISAND constitutive model for response of solid skeleton. After a detailed verification and validation of the formulation and implementation of the developed numerical tool, it is employed in the seismic response of saturated porous media. The study includes examination of the mechanism of propagation of the earthquake-induced shear waves and liquefaction phenomenon in uniform and layered profiles of saturated sand deposits. 相似文献
12.
Study of pore pressure variation during liquefaction using two constitutive models for sand 总被引：1，自引：0，他引：1
Numerical analyses of liquefiable sand are presented in this paper. Liquefaction phenomenon is an undrained response of saturated sandy soils when they are subjected to static or dynamic loads. A fully coupled dynamic computer code is developed to predict the liquefaction potential of a saturated sandy layer. Coupled dynamic field equations of extended Biot's theory with u–P formulation are used to determine the responses of pore fluid and soil skeleton. Generalized Newmark method is employed for integration in time. The soil behavior is modelled by two constitutive models; a critical state two-surface plasticity model, and a densification model. A class ‘B’ analysis of a centrifuge experiment is performed to simulate the dynamic response of level ground sites. The results of the numerical analyses demonstrate the capability of the critical sate two-surface plasticity model in producing pore pressures that are consistent with observations of the behavior of liquefiable sand in the centrifuge test. 相似文献
13.
Liquefaction which is one of the most destructive ground deformations occurs during an earthquake in saturated or partially saturated silty and sandy soils, which may cause serious damages such as settlement and tilting of structures due to shear strength loss of soils. Standard (SPT) and cone (CPT) penetration tests as well as the shear wave velocity (V s)-based methods are commonly used for the determination of liquefaction potential. In this research, it was aimed to compare the SPT and V s-based liquefaction analysis methods by generating different earthquake scenarios. Accordingly, the Erci? residential area, which was mostly affected by the 2011 Van earthquake (M w = 7.1), was chosen as the model site. Erci? (Van, Turkey) and its surroundings settle on an alluvial plain which consists of silty and sandy layers with shallow groundwater level. Moreover, Çald?ran, Erci?–Kocap?nar and Van Fault Zones are the major seismic sources of the region which have a significant potential of producing large magnitude earthquakes. After liquefaction assessments, the liquefaction potential in the western part of the region and in the coastal regions nearby the Lake Van is found to be higher than the other locations. Thus, it can be stated that the soil tightness and groundwater level dominantly control the liquefaction potential. In addition, the lateral spreading and sand boiling spots observed after the 23rd October 2011 Van earthquake overlap the scenario boundaries predicted in this study. Eventually, the use of V s-based liquefaction analysis in collaboration with the SPT results is quite advantageous to assess the rate of liquefaction in a specific area. 相似文献
14.
An automatically adaptive element free method is presented to analyze the seismic response of liquefiable soils.The method is based on the element free Galerkin method (EFGM) and the fission procedure that is part of h-refinement,indicated by error estimation. In the proposed method, a posteriori error estimate procedure that depends on the energy normof stress and the T-Belytschko (TB) stress recovery scheme is incorporated. The effective cyclic elasto-plastic constitutivemodel is used to describe the nonlinear behavior of the saturated soil. The governing equations are established by u-pformulation. The proposed method can effectively avoid the volumetric locking due to large deformation that usually occursin numerical computations using the finite element method (FEM). The efficiency of the proposed method is demonstratedby evaluating the seismic response of an embankment and comparing it to results obtained through FEM. It is shown that theproposed method provides an accurate seismic analysis of saturated soil that includes the effects of liquefaction 相似文献
15.
Yan-Guo Zhou Kai Liu Dao-Sheng Ling Tao Shen Yun-Min Chen 《Bulletin of Earthquake Engineering》2018,16(11):5151-5170
Estimating the possible region of liquefaction occurrence during a strong earthquake is highly valuable for economy loss estimation, reconnaissance efforts and site investigations after the event. This study identified and compiled a large amount of liquefaction case histories from the 2008 Wenchuan earthquake, China, to investigate the relationship between the attenuation of seismic wave energy and liquefaction distance limit during this earthquake. Firstly, we introduced the concept of energy absorption ratio, which is defined as the absorbed energy of soil divided by the imparted energy of seismic waves at a given site, and the relationship between the energy absorption ratio and the material damping ratio was established based on shear stress–strain loop of soil element and the seismic wave propagation process from the source to the site. Secondly, the threshold imparted seismic energy of liquefaction was obtained based on existing researches of absorbed energy required to trigger liquefaction of sandy soils and the ground motion attenuation characteristics of the 2008 Wenchuan earthquake, and the liquefaction distance limit of this earthquake was estimated according to the proposed magnitude–energy–distance relationship. Finally, the field liquefaction database of 209 sites of the 2008 Wenchuan earthquake was used to validate such an estimation, and the field observed threshold imparted seismic energy to cause liquefaction in recent major earthquakes worldwide was back-analyzed to check the predictability of the present method, and several possible mechanisms were discussed to explain the discrepancy between the field observations and the theoretical predictions. This study indicates that seismic energy attenuation and liquefaction distance limit are regional specific and earthquake dependent, and 382 J/m3 is the average level of threshold imparted seismic energy to cause liquefaction for loose saturated sandy soils, and the corresponding liquefaction distance limit is approximately 87.4 km in fault distance for a Mw?=?7.9 event in the Chengdu Plain. The proposed regional energy attenuation model and threshold imparted seismic energy may be considered as an approximate tool in evaluating the liquefaction hazard during potential earthquakes in this area. 相似文献
16.
A series of undrained cyclic direct simple shear tests, which used a soil container with a membrane reinforced with stack rings to maintain the K0 condition and integrated bender elements for shear wave velocity measurement, were performed to study the liquefaction characteristics of gap-graded gravelly soils with no fines content. The intergrain state concept was employed to categorize gap-graded sand–gravel mixtures as sand-like, gravel-like, and in-transition soils, which show different liquefaction characteristics. The testing results reveal that a linear relationship exists between the shear wave velocity and the minor fraction content for sand–gravel mixtures at a given skeleton void ratio of the major fraction particles. For gap-graded gravelly sand, the gravel content has a small effect on the liquefaction resistance, and the cyclic resistance ratio (CRR) of gap-graded gravelly sands can be evaluated using current techniques for sands with gravel content corrections. In addition, the results indicate that the current shear wave velocity (Vs) based correlation underestimates the liquefaction resistance for Vs values less than 160 m/s, and different correlations should be proposed for sand-like and gravel-like gravelly soils. Preliminary modifications to the correlations used in current evaluations of liquefaction resistance have thus been proposed. 相似文献
17.
The liquefaction potential of soils is traditionally assessed through geotechnical approaches based on the calculation of the cyclical stress ratio (CSR) induced by the expected earthquake and the ‘resistance’ provided by the soil, which is quantified through standard penetration (SPT), cone penetration (CPT), or similar tests. In more recent years, attempts to assess the liquefaction potential have also been made through measurement of shear wave velocity (VS) in boreholes or from the surface. The latter approach has the advantage of being non-invasive and low cost and of surveying lines rather than single points. However, the resolution of seismic surface techniques is lower than that of borehole techniques and it is still debated whether it is sufficient to assess the liquefaction potential.In this paper we focus our attention on surface seismic techniques (specifically the popular passive and active seismic techniques based on the correlation of surface waves such as ReMiTM, MASW, ESAC, SSAP, etc.) and explore their performance in assessing the liquefaction susceptibility of soils. The experimental dataset is provided by the two main seismic events of ML=5.9 and 5.8 (MW=6.1, MW=6.0) that struck the Emilia-Romagna region (Northern Italy) on May 20 and 29, 2012, after which extensive liquefaction phenomena were documented in an area of 1200 km2.The CPT and drillings available in the area allow us to classify the soils into four classes: A) shallow liquefied sandy soils, B) shallow non-liquefied sandy soils, C) deep non-liquefied sandy soils, and D) clayey–silty soils, and to determine that on average class A soils presented a higher sand content at the depth of 5–8 m compared to class B soils, where sand was dominant in the upper 5 m. Surface wave active–passive surveys were performed at 84 sites, and it was found that they were capable of discriminating among only three soil classes, since class A and B soils showed exactly the same VS distribution, and it is possible to show both experimentally and theoretically that they appear not to have sufficient resolution to address the seismic liquefaction issue.As a last step, we applied the state-of-the art CSR–VS method to assess the liquefaction potential of sandy deposits and we found that it failed in the studied area. This might be due to the insufficient resolution of the surface wave methods in assessing the Vs of thin layers and to the fact that Vs scales with the square root of the shear modulus, which implies an intrinsic lower sensitivity of Vs to the shear resistance of the soil compared to parameters traditionally measured with the penetration tests. However, it also emerged that the pure observation of the surface wave dispersion curves at their simplest level (i.e. in the frequency domain, with no inversion) is still potentially informative and can be used to identify the sites where more detailed surveys to assess the liquefaction potential are recommended. 相似文献
18.
This paper investigates the postcyclic behavior of low-plasticity silt with excess pore pressure ratio (Ru) less than 1. The testing specimens were prepared from Mississippi River Valley (MRV) silt. Full and no reconsolidation were allowed after specimens were subjected to various excess pore pressure ratios due to cyclic loading in a cyclic triaxial cell, and then monotonic shear tests were conducted. The effect of the Ru on shear strength and stiffness at small and large deformation was investigated. It was found that a Ru greater than 0.70 is a prerequisite of large increase in volumetric strain and undrained shear strength for specimens with full reconsolidation. In contrast, a significant decrease in yield shear strength and initial stiffness was noted for specimens without reconsolidation. In comparison to published data for sands, the silt experienced significant volumetric strain due to reconsolidation at lower Ru, indicating that the specimen fabric was modified or strained at lower Ru. 相似文献
19.
Field investigations following the 2008 Ms8.0 Wenchuan earthquake identified 118 liquefaction sites, most of which are underlain by gravelly sediment in the Chengdu Plain and adjacent Mianyang area, in the Sichuan Province. Gravel sediment in the Sichuan province is widely distributed; hence it is necessary to develop a method for prediction and evaluation of gravel liquefaction behavior. Based on liquefaction investigation data and in-situ testing, and with reference to existing procedures for sandy soil liquefaction evaluation, a fundamental procedure for gravel liquefaction evaluation using dynamic penetration tests (DPT) is proposed along with a corresponding model and calculation formula. The procedure contains two stages, i.e., pre-determination and re-determination. Pre-determination excludes impossible liquefiable or non-liquefiable soils, and re-determination explores a DPT-based critical N120 blows calculation model. Pre-determination includes three criteria, i.e., geological age, gravel contents, gravel sediment depths and water tables. The re-determination model consists of five parameters, i.e., DPT reference values, gravel contents, gravel sediment depths, water tables and seismic intensities. A normalization method is used for DPT reference values and an optimization method is used for the gravel sediment depth coefficient and water table coefficient. The gravel liquefaction evaluation method proposed herein is simple and takes most influencing factors on gravel sediment liquefaction into account. 相似文献
20.
Results are presented of laboratory resonant column and cyclic triaxial tests on specimens of two compacted soils (a sandy–silty clay and a sand–gravel mixture), planned to be used in the core and the shells, respectively, of a proposed earthfill dam. The values of low-amplitude shear modulus of the clayey material were found to increase with increasing confining pressure and decreasing water content, with deviations of ±20% from the predictions of the “Hardin equation”. On the other hand, the low-amplitude damping ratio was found to be at least four times higher than the values corresponding to natural undisturbed cohesive soils. The proposed G/G0−γc curve for the compacted cohesive soil was found to be independent of confining pressure and small variations of the water content on either side of the optimum value and showed a remarkable agreement with recently published similar curves for natural cohesive soils. For the case of the sand–gravel mixture, normalized G/G0–γc and D–γc curves are proposed, based on recently published results for gravelly soils and the limited data of the present study. The liquefaction resistance of the saturated sand–gravel mixture was found to be strongly dependent on its relative density, especially for high values of cyclic stress ratio. A relative density of at least 55% was found to be necessary to assure safety against earthquake-induced liquefaction of the material. The results presented herein may be used (directly or as guide) in the seismic analysis of (new or existing) earth dams constructed from similar soil materials and in addition they provide insight into the dynamic behavior of compacted soils. 相似文献